F4 Value Help for Bex Variable (BRAIN646)

Hi ,
I set a authorization variable which allow user to select in a Bex query . When I run query and click value help on that variable, the system keep send a warning msg like :
Value if variable ZVAPLAMS is automatically converted
Message no. BRAIN646
Is there any way to suppress this warnning msg?
Thx,
Jeff

Hi Sims,
I had also the same Problem (BRAIN 646). I've debugged the Query with transaction rsudo -> Execute User as "User with warning" -> Possible Transaction "RSRT" -> Start Transaction.
The Transaction RSRT is opened and you can now debug your Query by klicking on "Execute + Debug" -> Expand "Variables" and activate "Customer Exit Variable (Before)".
Don't forget to enter your Queryname.
You are in Debuging-Mode and set Break-Points (see screenshots)
1. Set break-point on FORM VALUE_FROM_AUTHORITY_FILL then F8 and get in with F5
2. Set break-point on IF l_i1 <> l_i2. then F8 and you get your cursor on IF l_i1 <> l_i2.
You may see, if internal tables "l_i1" and "l_i2" have the same count of rows. If not take a look at "l_i1", if there Interval value exist, if internal value do exist. If interval values do exist and in "l_i2" doesn't than you have replace your variable " ZVAPLAMS" with another Variable (selection option). It has to be "Selection Option", than only selection option variable accept single values and interval values.
Regards
Wanda Soetomo

Similar Messages

F4 help for BEx variables

Hi!
Could anyone help me in implementation the following scenario:
I have the BEx variable available for input. Then users press F4 to view possible values for this variable, I need to output the certan list of values (the list is defined by quite complex logic - user algorithm).
So, Do I have the possibility to catch the SAP processing of F4 help and program my logic for the output list (some kind of exit)?
Please suggest any decision or the source of information according this issue.

Hello Marina Dolgopolova,
Are you able to find the solution for this requirement. If so pl let me know.
Thanks & Regards ::
Balaji T

Take influence on search help (F4) for BEx variables

Hi Experts,
we use BI 7.3.
Within the release 3.x we had the possibility to influence the search help of Bex Variables via the transaction se12 -> search help --> search help exit.
This fuba is still used for the search help in the screen to maintain masterdata. However it is not used anymore for the search help in the selection screen for BEx variables.
Do I have any new possibilities to take influence on the values shown in the search help? I don't want to show all values in the masterdata table, and not even all values which are stored in the infoProvider.
Thanks,
best regards
Frederike

Dear Frederike,
In that case you should maintain the read mode as "Only Posted Values for Navigation" ; This means only values that are part of the query results are used for the input value request . This mode is called Q.
RSA1 -> Info-object display -> Business Explorer Tab -> Query Def. Filter Value Selection -> change to Q Mode..
You can overwrite the value in Infoprovider level as well. Goto Info-provider -> Right click Infooprovide specific properties -> change there as well..
Regards,
Arvind

Limiting the value help for a user input variable as required

Hello Gurus,
I have a requirement :-
Restrict the value help for a user input variable in a query to only a required set of values instead of the default behaviour. ie instead of having all the values in the master data of that characteristics in the value help.
How do I go about it? - Do I have to explore the precalculated value set feature?
If so, please tell me how to go about it in BI 7.I would appreciate if you could explain it in detail rather than sending me a URL because I have gone through most of them but Iam yet to figure out how to create the broadcast setting and subsequent steps.
Thanks for your time.
Regards,
Kris_Hitman

I believe if the User doesn't want to see any particular values in F4 help then it means they are not intrested in viewing the transaction data related to those values.
So why don't you restrict that object with the required values. Then the F4 help will automatically display only those values.

No value found for text variable ZZCALQTR in "&ZZCALQTR&"

Hi,
I m currently working on cell definition and facing some problems.
Considerthis
Structure1
Current Cal Quarter Last Cal Quarter
Row1
Row2
Total
For Current Cal Quarter and Last Cal Quarter i have text variable &ZZCALQTR& and inside i have restricted 0CALQUARTER.
ANd i have used
different offset for )CalQuarter in individual cell definition.
So, it is giving me this error
No value found for text variable ZZCALQTR in "&ZZCALQTR&".
what should i do...any solution
regards,
Sandeep Khatri

Hi San,
i think u r exeuting the Query without providing any value in selection screen.then it displays the error message which u mentioned...just enter some value in selectionand try it..
hope this helps
regards

No value found for Text Variable

Hi All,
I have 2 different variable created on 0VERSION. One for user entry and second one is text variable with replacement path as "text".
I have 3 different columns in the report.
One is Restricted KF, based on user entry variable. Heading of this column has to be Result (&ZVERTXT&), where ZVERTXT is my text varaible.
Now, in second column I m using formula to calculate percentage. Heading of this column is &ZVERTXT& (%).
Now, in third column i m again using formula using the same KF as in first column. But this time, in the heading this text variable thorws "no value found error"
can anybody help me out in this issue.. ??

Hi,
This is the proble to get value for text variables with Replacement path ,in case system is getting 2 reference values .So it get confusion and says that No value found for Text Variable .
So as a work around :
Instead of a text variable with automatic substitution(replace ment path) from another characteristic value, you can also create a text variable that is filled by a customer exit.In the code you assign the Text value by looking into TEXT table with the value you got from User entry variable( which is used in first Restricted KF).
With rgds,
Anil Kumar Sharma .P

Dynamic value help for a table field to fill two fields, how to?

Hi all gurus,
In SRM 7 I defined a dynamic value help for a single field (ZZ_PROLE_R3) of my header custom table.
That's the code from WDDOMODIFYVIEW in the webdynpro /SAPSRM/WDC_DODC_CT, view V_DODC_CT:
DATA: lo_tabnode        TYPE REF TO IF_WD_CONTEXT_NODE.
      DATA: lo_tabnode_info   TYPE REF TO IF_WD_CONTEXT_NODE_INFO.
      DATA: tab_value         TYPE WDR_CONTEXT_ATTR_VALUE_LIST,
            wa_value          TYPE WDR_CONTEXT_ATTR_VALUE.
      lo_tabnode = wd_context->GET_CHILD_NODE( name = 'THCUS' ). "the custom table node
      lo_tabnode_info = lo_tabnode->get_node_info( ).
      wd_this->GET_VALHELP_ZZ_PROLE_R3( EXPORTING iv_guid = lv_guid
                                        IMPORTING ZZ_PROLE_R3_VALHELP = tab_value ). "this method returns the dyn value table
      lo_tabnode_info->set_attribute_value_set( name = 'ZZ_PROLE_R3'
                                                 value_set = tab_value ).
The method GET_VALHELP_ZZ_PROLE_R3 dynamically builds the value help table tab_value; such table is made up by two fields:
value : contains the value of the field
text   : contains a description of the value
The above solution works; now I'd like to enhance it. The custom table THCUS contains also a field called ZZ_PROLE_R3_DESC, which represents the description of ZZ_PROLE_R3. It is, exactly, the TEXT field in tab_value.
So I'd like to do as follows:
- the user clicks on the search help for ZZ_PROLE_R3 field of the table;
- the above described value help appears;
- after the selection, both ZZ_PROLE_R3 and ZZ_PROLE_R3_DESC are filled with the selected couple value - text chosen from the value help.
Could anyone help me achieving such a behaviour?
Again, a little request... when I open the above value help dialog box, the window itself has a label "Floorplan Manager application for OIF.." that obviously I'd like to redefine (e.g. "Role selection value help"). Is there any way to do that?
Thanks in advance

Chris Paine wrote:
It seems to me - given that your code is in wddomodifyview that you are trying to have different dropdowns per row
- I'm not sure where you are populating lv_guid - but I'd guess it is an attribute of the row selected? If it isn't then I can't see any reason that you would do this code in wddomodifyview and not wddoinit.
Hi Chris and thanks for your help,
lv_guid is the GUID of the document's header; I need to pass it to the method that populates my value help table because the values in it are derived from some fields on the document. (the situation actually is more complex; there's an RFC call on the backend for which the document is intended for to retrieve the data that populate the value help...).
I'm quite unexperienced on webdynpro and terminology; if dropdown menus are fixed selection option that appears on a field, I guess this is not my case. I did a pair of screenshot to provide an idea of what the solution by now is, and what "I would like to have":
[Pre-selection (F4 icon on the field in table)|http://imagebin.ca/view/npIsaqF.html]
[Value Help popup for the field ZZ_PROLE_R3|http://imagebin.ca/view/8fZUh3T.html]
[Result by now |http://imagebin.ca/view/3PaqdvE.html]
[Result I'd like to have.|http://imagebin.ca/view/dExR0J.html]
Chris Paine wrote:
However - by your comment on the "value help dialog box" I am guessing you are using an input field? If this is the case then I would strongly suggest that you change/enhance the structure of the context node THCUS (btw, better coding practise to refer to it as wd_this->wdctx_thcus when using the get child node construct) so that you refer to an actual SAP ddic search help, if you then associate in the structure the value and text fields then populating the text field should happen automatically. Also you'd have the nice side effect that your value help dialog would be named after the associated ddic search help.
Thanks for the code suggestion, I'll apply that. For what concerns the context node THCUS... It is, by standard, a node which I can't explictly find in the context for the view V_DODC_CT. The problem is that ZZ_PROLE_R3 and the corresponding description field ZZ_PROLE_R3_DESC of the table must be filled with data retrieved dynamically @ runtime from the backend. So I guess I can't populate a val help referring to a dictionary table/field; I'd rather do as follows:
- retrieve what's the target backend for the document (to do so, I have to process the document .. that's why the header guid passed to my method);
- RFC call to a custom method that extracts possible values for the specific backend;
- bind the ammissible values to the value help.
Chris Paine wrote:
I realise that this is rather a lot - so if you have any specific question please do respond - hopefully I or someone else will be able to clarify.
Thanks again for your help; additional info as well as code examples would be highly appreciated

Filter Criteria in Value Help for InfoObject

Hi,
Is it possible to remove the value from Filter Criteria. When I use F4 for a Field (in Screen) , its showing a poup window (Value Help for Info Object) with some personal values. When I click "More Values" option its showing the General Value List, where I can see the Filter Criteria. When I click "Show Filter Criteria", its showing the Criteria with a Value (This value is coming from the field(Screen) from where I am coming). is it possible to avoid of passing value from my screen field to Filter Criteria ?
Thanks
Srinivas

Murugan,
I really hope that the moderator do not remove my points for this!
WebDynpro ABAP Select-Options and OVS Help.
How to Achieve OVS Search Help in Select Option in Web Dynpro ABAP
How to Use OVS Help For Multiple Input Fields in Select-Options.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/707f0d73-94f0-2d10-97a2-a3776e2118d8?QuickLink=index&…
Using Select Options in a Web Dynpro(ABAP) Application
Regards,
Ashvin

Value Help for a field from custom table in BSP

Please let me know, the procedure to create value help for a field from a custom table in BSP using HTMLB.
Thanks

hi prodigy,
check this code using drop down list.
layout for first page
<htmlb:dropdownListBox id = "ddlist"
 table = "<%=t_mara%>"
 nameOfKeyColumn = "matnr"
 nameOfValueColumn = "matnr"></htmlb:dropdownListBox>
event Oninitialization event of first page
SELECT MATNR UP TO 10 ROWS
INTO TABLE T_MARA
FROM MARA.
 event Oninputprocessing event
**Load the manager class
CLASS CL_HTMLB_MANAGER DEFINITION LOAD.
DATA: V_EVENT TYPE REF TO CL_HTMLB_EVENT.
DATA: DATA TYPE REF TO OBJECT.
DATA: V_DATA TYPE REF TO CL_HTMLB_DROPDOWNLISTBOX.
CALL METHOD CL_HTMLB_MANAGER=>GET_EVENT
EXPORTING
 REQUEST = RUNTIME->SERVER->REQUEST
RECEIVING
 EVENT = V_EVENT
IF V_EVENT->NAME = 'button' AND
 V_EVENT->EVENT_TYPE = 'click'.
DATA ?= CL_HTMLB_MANAGER=>GET_DATA( REQUEST =
 RUNTIME->SERVER->REQUEST
 NAME = 'inputField'
 ID = 'matnr'
 V_DATA ?= DATA.
IF V_DATA IS NOT INITIAL.
 V_MATNR = V_DATA->SELECTION.
ENDIF.
NAVIGATION->SET_PARAMETER( NAME = 'v_matnr' VALUE = V_MATNR ).
NAVIGATION->GOTO_PAGE( 'detail.htm' ).
ENDIF.
in the onInitialization event for detail pageSELECT MATNR
 ERSDA
 ERNAM
 LAEDA
 AENAM
 VPSTA
 PSTAT
 LVORM
 MTART
FROM MARA
INTO TABLE T_MARA
WHERE MATNR = V_MATNR.

Implementation of F4 value help for a search field which is an EEWB field

Hi...
I am trying to create a F4 value help for a search field which is an eewb field.The f4 value help jus need to be a pop up containing the values of the field existing in the system.Since this is a search field the GET_V method cannot be used. I tried implementing it by creating a search help and then using it in the GET_DQUERY_VALUEHELPS method.But the problem when u use the search help is that all the values including the null values and duplicate entries will be populated when f4 is clicked.Is there any way to filter the values that get populated when f4 is clicked?If any other method can be used to implement the functionality please let me know..Thanks in advance....

Hi,
the GET_V methods worked for me most of the time. Even in advanced searchs. Only time they do not is if there is a different aproach considered in the GET_DQUERY_VALUEHELPS.
As the GET_V_ you created obviously was called I suppose you found the correct place to Populate it to be used in the search.
I do not know what the problem with the NULL values and duplicate entries is you talked about, but it sounds to me the creation of your valuehelp class is flawed. Not the integration into the UI.
Maybe have a look at SAPs' standard implementations of Search Components. You should get a feeling for how search helps work. See. BT111S_OPPT, BP_HEAD_SEARCH
cheers Carsten

Value help for select options (pass the selected values to the select opt)

Hi everyone,
I created a custom value help for my select options.
It works fine, when the user clicks on the value help, my own view is displayed, and the user can select the required values:
lt_range_table =
wd_this->m_handler->create_range_table(
i_typename = 'ORGEH' ).
* add a new field to the selection
wd_this->m_handler->add_selection_field(
i_id = 'ORGEH'
i_value_help_id = 'MYSO'
i_value_help_type = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_APPLDEV
it_result = lt_range_table
i_read_only = read_only ).
The problem is, how can I pass the values to the select option? When the user selects the values in my view, I have them in an internal table. But how can i pass these values to the select option? I suppose there is declared method for this... but which one?
Thanks
N.

Sorry for the stupid question, but it seems I can't acces my attribute:
I create it in the component controller
NODE: 'APP_DATA'
Attribute: M_HANDLER TYPE IF_WD_SELECT_OPTIONS
Cardinality 1..1
Selection 1..1
Singleton = 'X'
I pass the values int he EDOINIT method of MAIN view:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
    RECEIVING
      CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
ls_app_data-m_handler = wd_this->m_handler.
lo_child->bind_structure( ls_app_data ).
After this code I test it if the binding is correct:
DATA: ls_test TYPE wd_comp_controller->element_app_data.
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
IMPORTING
    STATIC_ATTRIBUTES = ls_test.
The lstest is correct_. It has the reference for the SelectOption
Now, in the SEL_TREE View:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
    RECEIVING
      CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
*Get the data from the node
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
    IMPORTING
      STATIC_ATTRIBUTES = ls_app_data.
wd_this->m_handler = ls_app_data-m_handler.
The ls_app_data-m_handler is INITIAL. There is no value in it.
What did I do wrongly?
Please help
Thanks
N.

How to implement Value Help for Product ID?

Hi,
I have a Z-Component where I want to use the value help of the Product ID. I found several components which use this value help for Products but I can't get it to work in my component properly.
Does anybody have a short tutorial how I need to proceed?
Thanks in advance.

There is a search component that can be used for this purpose.
This is one function out of several. I don't have the complete implementation at hand but this will give you the first idea.
CALL METHOD cl_crm_uiu_prod_tools_search=>eh_onclosepopup_return_product
   EXPORTING
      ir_search_popup = search_popup
   CHANGING
      cr_context_node = lv_target_node
      cv_index        = gv_tableindex.

Drop-Down-Box (F4 Input Help) for formula variable in BEx Analyzer (BI 7.0)

Hi Gurus,
is it possible to get a drop down box for a ready for input formula variable in the BEx Analyzer (not BEx Web!)?
We want to let the users choose scaling factors 1, 1000 or 1000000 (implemented via this formula variable). In the settings of the formula variable you can only choose a default value but there seems to be no option to provide all three factors in a drop down box like the ones for characteristic value variables.
We could prevent other entries in the variable pop up via customer exit (i_step 3) but the business is wishing an F4 input help like the ones for characteristic values.
Thanks for your help,
Marco

Hi Macro,
Its not possible to get drop down box for a ready for input formula variable. Because it is possible only for characterstic value variables but not formula variable.u donnot get any drop down box like ready for input for formula variable.
Regards,
Premalatha.C

Value Help for Date inverval in Variable Form in Visual Composer

Hi all,
I have created a variable form which has Date interval with value help as one of the parameters.
when i click on the value help and select any date interval then it is displayed as say '20081015:20090101' but when i submit this value i get an error "INVALID_VARIABLE_VALUES".
this variable is working fine when i manually enter the interval as '10/15/2008:01/01/2009'.
is there any way where we can input the date interval value as '10/15/2008:01/01/2009' using the value help.
any help is highly appreciated.
regards,
RK,.

Hi Ramakrishna,
Value help is considered as a popup iview in visual composer. You can change the fields in popup iview like normal iview. Drill down the popup iview of the value help and change the date format using DSTR function.
Try the below link for change the date format.
http://help.sap.com/saphelp_nw04/helpdata/en/d2/63f340e8dd8431e10000000a1550b0/frameset.htm
Regards
Basheer

Crystal Reports and values list of BEx variables

Hello.
I read this - http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsandBWquery+elements
And there are writed in wiki:
"List of values for SAP variables are created automatically by Crystal Reports only when you use SAP Toolbar to create the report:
The list of values for a variable in Crystal Reports will be static, but the list will be always dymanic in InfoView as long as you use BW Publisher (save reports to BW, publish to BOE)and you logon to BOE using SAP Authentication."
I have two link to BEx queries from my CR report - and my variables have not values. I think that I don't use "SAP" menu when created the report.
But... what I can doing now? Is way transform "simple" report into "SAP" report?
May be is way create "SAP" report and after it copy all content of old report into new "SAP" report including all objects, formats, formulas, connections?
May be is way load values list from BEx query with "simple" reports?
And another question - I see that in list I get texts and codes but showing only texts in run-time. Can I tune CR for show codes too?

Post to Integration Kit SAP forum

F4 Value Help for Bex Variable (BRAIN646)

Similar Messages

Maybe you are looking for