FA TAX BOOK FLOW

제품 : FIN_FA
작성날짜 : 2004-07-01
FA TAX BOOK FLOW
================
PURPOSE
TAX Book을 사용하고자 하는 User에게 Tax Book을 Setup해서 사용하는 절차를 설명한다.
Explanation
FA TAX BOOK Flow
1. 먼저 Corporate Book의 Setup을 마친다.
2. Corp Book을 바탕으로 Tax Book을 Setup한다.
=>주의할 점은 Allow Mass Copy기능을 꼭 선택하도록 한다.
Current Period는 Corp Book의 이전 회계년도의 마지막 Period를 선택하도록 한다.
3. Corp Book에 대한 Asset Category를 등록한다.
4. Corp Book에 자산을 등록한다.
5. TAX Book에 사용할 Asset Category를 등록한다.
6. Corp Book에 대한 상각을 수행한다.
7. TAX Book에 대해서 초기 1회 Initial Mass Copy를 수행하도록 한다.
8. 이미 상각이 수행된 Corp Book에 대한 Period에 대해서 Periodic Mass Copy를 수행한다.
=> Tax Book에 Category가 등록이 안되어 있을때에는 Tax Book에 Addition이 되지 않는다.
9. Tax Book에 대한 Depreciation을 수행하여 Corp Book과 같은 Peiord로 맞추도록 한다.
Example
Reference Documents
-------------------

It all depends on how much data you have? the easy way is to setup new book if you want to change in production. can setup new fiscal calendar for FA but as the existing book cannot be changed after data is loaded. one more way is to update the records with jun-08 in test instance and run depreciation

Similar Messages

  • Fixed Assets - Tax Book Depreciation Reset

    Hello Fixed Assets Experts,
    My company recently reorganized our parent company, and now has the following scenario:
    Due to legal changes, we need to start over the useful life on our tax books (10 and 11) and restart the calculation of depreciation based on the net book value of the asset on 1/1/2008.  Book 01 needs to continue as normal.  We would like to use the current asset numbers and not transfer anything to new numbers.  These are all of our FFE assets, so there are multiple depreciation keys and useful lives (i.e. computer equipment, property, etc).  I have tried making custom depreciation keys and changing the useful lives to get the desired result, but can't seem to find a way to do it.
    Here is an example:
    Asset 1 (software), was capitalized on 06/30/2006 with a useful life of 3 years and has been depreciating since.  It is scheduled for end of life in 2009.  The net book value of the asset on 1/1/08 is 1219.97.  I need to depreciate the 1219.97 over 3 years starting on 1/1/08.
    Is this possible?  We have not run our December 08 depreciation, but I am running out of options.
    Thanks in advance!

    Do you working on ECC 6 and activate the option EA-FIN. In that case it is possible to use time intervale in the tab Depr Areas (click 2 times on the line). This should solve your problem.
    See the wiki about new depreciation
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/erpfi/asset+accounting

  • Differing asset tax book and accounting book when the currency is foreign

    Hi Asset Gurus,
    My company has this requirement that when the asset is acquired in foreign currency there will be acquisition posting on Accounting Book (area 01) but zero on the Tax Book (area 15).  They said this is in conformance with the reporting standard.  Can anyone give me an idea how can this be done in the asset accounting?  Do I need to setup new depreciation area just for this requirement?
    Thanks,
    Aloy

    Thanks AP for your reply.  Please bear with me a little bit as I still don't see the complete picture.  Currently this is what's happening:
    When the acquisition is made in foreign currency, both depreciation area 01 (accounting book) and area 15 (tax book) gets updated with local currency value (APC).  Now the requirement is to make tax book area not posted to everytime this situation happens.  We don't really need to have the foreign currency amount reflected in the asset.
    Given the requirement description above, do you still think parallel currency in FI and additional depreciation area would be the solution?  If yes, could you kindly expound further on that solutions please?
    Thanks a lot for your help.

  • Copying assets in Tax book which didnt exist in the corp book last year?

    Hi All,
    We are facing following issue with our Fixed Assets Tax reporting. If someone can point us in right direction, we would really appreciate that
    1)     We are currently running on Oracle 11.5.10
    2)     Right now (as of JUN-11), we have 1 consolidated corp book in the system with around 14000 assets in it and no tax books
    3)     Tax reporting is done from a third party software. Right now we have filed for taxes till 2009. 2010 tax filing is still pending
    4)     We want to file 2010 taxes by August and we want to do it through Oracle. We are planning to configure tax book in the system so that taxes can be filed
    5)     The approach would be to create a Tax book with open period as of 2009. Run the Initial Mass copy from corp book to tax book. This would copy everything from corp book to tax book as of Dec-2009. Then depreciate the tax books all through 2010 and run periodic mass copy for every month and we will get the DEC-2010 figure
    6)     But there is a catch here. As I said that we have all our assets in just one corp book. But that wasn’t the case before Jan-2011. We had around 20 corp books for every legal entity. So all the assets that we have today were lying around in various corp books. We did the consolidation of the assets into one book this January-2011 because all our legal entities were consolidated.
    7)     Now given this scenario, if we run the Initial Mass copy as described in point 5 to the tax book only those assets from the corp book will be copied to the tax book which existed in this corp book as of DEC-2009. (This is the standard Oracle functionality). This is not the complete list as only few assets were there in this book as of Dec-2009. Rest of them were in different books
    8)     Do we have to create tax books for all the corporate books to achieve what we want to achieve or is there a way that multiple corp book data can be copied to one tax book?
    Please let me know your thoughts
    Regards,
    Rahul

    I will re - ask the question in just one line. Please reply if you know the answer:
    Is it possible in Oracle to Initial mass copy asset data from corp book to tax book in the last fiscal year when the assets did not exist in the corp book as of last fiscal year? Assets were brought to that corp book only this year as part of consolidation
    Thanks
    Rahul

  • Asset  - Restating tax books for 2006

    Hello Asset Mavens!
    Do you know how to restate the tax books (they don't post to general ledger) for a prior year (2006) due to an acquisition. 
    This is for tax returns related to a company that was spun off:
    Assets acquired in Jan or Feb 2006 have a 'stub' period for those 2 months and a second 'stub' period for the months of March-Dec.  Assets acquired March-Dec have a different calculation as well, which I can show if that's helpful.
    We are on 4.6C.  
    Your help would be greatly appreciated!

    I had never changed a depreciation key and recalculated, so I tested that and found it very helpful.
    Further clarification requested:  the assets acquired in in the first two months in 2006 need to have two depreciation methods in 2006:  one for the first two months, based on a 'year' of 2 months, and a second method requiring depreciation based on a 10 month year. 
    How is that done?  Do I develop a single key that incorporates both changes - and I'm not sure that is possible.  Is manual depreciation an option?
    Thank you!

  • Upload to tax book interface

    Hi
    I'm running the upload to tax book interface concurrent request. It completes successfully but with zero successes and zero failures. Out file:
    BT GROUP FINANCE Tax Upload Interface Execution Report 22/12/2009 09:11:38
    Book: VE 2256 TAX
    Request ID: 8321177
    Number of successes: 0
    Number of failures: 0
    Program Tax Upload Interface completed successfully
    Asset Number Status
    Can any one tell me the what needs to be done to values get populated?
    Regards
    Raghavendra Nara

    Pl post your full OS and EBS versions. Pl see if these MOS Docs can help
    266506.1 - Required COLUMNS for Tax Upload Interface process
    579666.1 - Oracle Assets Tax Upload Interface FAQ
    Pl see you duplicate thread here - Upload to tax book interface
    HTH
    Srini

  • Automatic derivation of service tax (derived flow) flow during the posting of charges through FWBS in Security Module.

    Hi
    Case: Automatic derivation of service tax (derived flow) flow during the posting of charges through FWBS in Security Module.
    I am trying  to post the charges using Manual Posting FWBS but system not generating (automatically)  derived flow for the service tax flow on charges.
    I have done below mentioned  steps for configuration:
    Define the derivation procedure and Rules.
    Assign the update type to the function of security account management.- Define update type fo manual posting.
    Kindly advise.
    Regards

    Hi,
    The definition of "Define Derivation Procedures and Rules" for derived flows are only taken into account during transaction management, deriving one flow type from origin flow type. This customizing does not have effect for FWBS. You may check the below customizing:
    1) Transaction Manager > Securities > Master Data > Product Types > Define Company Code-Dependent Settings for the Product Type: mark the indicator "Generate taxes" in Settings for tax generation.
    2) Transaction Manager > Securities > Position Management  > Securities Account Management > Define Tax Rates.
    Further you may consider the implementation of BAdI TPM_TAX_CALCULATION (please see note 1159408) to calculate the tax depending on your requirements. Note: the above BAdI is called only in the case the required settings are done in 'Define Tax Rates' in the Customizing.
    Best regards,
    Jasmine

  • Assign assets to multiple Tax books and Depreciation rates

    How do we assign an asset to multiple tax books at a time when Populating Oracle Assets with asset information obtained from a legacy system ? Customer has given different depreciation values to the different tax books.

    Hi,
    you can use initial Mass copy and periodic mass copy once you have data in your coporate book.
    Thanks
    Sunil

  • Taxes not flowing to Service entry sheet

    Hi,
    Service tax is not flowing to Service entry sheet but It is appearing in the PO. Kindly suggest how to get the same,
    Regards,
    Sathya.

    Hi
    Means what ? You want to add service tax ammunt at service consumption ammount or cleared at MIRO,
    If you use Tax code at Po for Service tax then this ammount is cleared at Invoice (MIRO) only .
    If you maintain service tax at Pricing procedure then it is added at service consumption ammount at service entry sheet.
    Regards
    sanjay L

  • How to use TAX books in FA

    Hi,
    We are using Oracle Asset and we have the setup of corporate book,
    in few Asset we required run depreciation in different rate and similarly we want to take GL impact also.
    Beside this we also identify the Asset depreciation ( which we change the Dep rate) in corporate books so we can reverse the GL impact of those Assets depreciation.
    Please suggest
    Thanks
    Lalit

    Hi Jingesh,
    thank you for that explanation. I am able to see that A1 Tax Code :). But this Tax Code has no influence for my Excise Invoice/Exise rates, isnt it?
    When i try to put in the Key Combination: Country/Tax Code, my Tax Code A1 or A2, then it shows up an error message: Object Tax Code not provided with charackteristic A1 or A2. What does that mean? I think this Tax Codes are not influencing my selection of tax percentages. I´d like to have it as an access sequence requirement something like that. that is my problem...
    In the example above, it was the selection of liable or not and their combination but no influence of an the tax code, cause we are writing it down to the Sales Order with this Condition Record.
    The next problem i am facing is, that i do not see my exise duty inside my excise invoice. i customized the "account determination", i maintained Excise Defaults and i do not ticked the statistik marker inside the pricing procedure... i got that one
    Still it is a hard thing this CIN.
    Again thank you for your help.
    Best Regards,
    Conrad
    Edited by: CDolff on Apr 5, 2011 3:39 PM

  • InDesign CS5 - PDF Book Flow

    I am in the process of creating an InDesign book that is meant to be viewed as web-only. They are facing pages as the design requires the pages to be viewed side by side. There is a problem, though, with the chapters that have an uneven amount of pages. The page will not flow down to the next chapter, making for a very awkward-looking PDF.
    For example, the PDF looks something like this, wherein [][] is a spread and [ ] is one page.
    I would like to be able to click through the PDF and have it look more like this:
    Where all of the spreads are visible rather than having the few scraggling single-page screens.
    Is there a way to get the pages all to flow together once I export it to PDF? Will I have to manually go through each page in order to make sure they are spreads?
    So far I have modified my documents so that all pages start on page 2, eliminating the single 'cover' page, but the end of the chapter is causing me trouble still.

    Spreads are built in the PDF during export, so if there are an uneven number of pages in the file you will get one single page, or if you have an even number and start the chapter on a right page you will get two single page spreads. Acrobat will not combine pages.
    You have two choices, combine your chapters into a single file before exporting, or export as single pages and let acrobat display them side-by-side. You can control the initial display settings in Acrobat Pro so the book will always appear as two pages when opened, but you can't prevent a user form changing the display option after opening if you use the second method.
    You should think very carefully about your design and your viewers. Not all readers have young eyes or wide-screen displays. I personally find pages set as two-columns to be very difficult to work with on screen as a consumer, let alone having to look at a full two-page spread.

  • Tax flow from SABRIX to Invoice

    Hi Gurus,
    Need your help/ comments on the following scenario:
    Billing document has only one line item and the accounting document can't be generated since the system gives an error message stating "Pricing error in item 000010" message number if VF073.
    Now the background for this is:
    Taxes in the sales order are flowing from SABRIX, the condition records show 2 levels of taxes 4% & 1% subsequently but the condition value is 0, which means taxes are not relevant for this scenario even when the taxes are flowing in, now the sales order has 4% & 1% but the invoice does not have 4% & 1% and this is the reason why this document has a pricing error.
    Now the question is what are the possible scenarios where tax condition records are not flowing from sales order to invoice, I have made sure that SABRIX was not down anytime during the day.
    Please help
    regards
    Anmol

    this is the reason why this document has a pricing error.
    To me it looks an early conclusion without much analysis. System won't check whether tax is applicable or not when releasing to accounting, unless the tax condition types are checked as mandatory. What you need to do is try to simulate the scenario in the test system (copying the pricing date from the production system sales order) and do the pricing analysis. Then you will realize the reason for the pricing error. Some possibilities could be Tax laws are keep on changing (resulting SABRIX updates), user might have changed the master data (customer master tax condition), user exit might be causing calculation of taxes,any routines in the pricing procedure etc.
    Regards,

  • LIFO Valuation for two financial books Tax and Statistics

    Dear Sir,
    Please let me know if my following requirement is possible in SAP or not.
    We would like to generate LIFO valuation for two financial books Tax and Statistics
    Tax book begins from April to March and
    Stat book begins from August to July.
    We are able to execute LIFO valuation only for Statistic books, as our financial books are from Aug to July.
    Also in LIFO configuration there is no setting for two fiscal year periods.
    Please let me know if our requirement is feasible for not.
    Regards,
    Sandeep

    Guys,
    Can anyone through some light on my query?
    Regards,
    Sandeep parab

  • Inter Company Billing and automatic booking to Vendor master.

    Hi,
    Wish you a Happy New year,,,,,,,
    We have done all the necessary configuration for generating Inter Company billing including the Cost booking to vendor Automatically.
    There are certain points where I need some help,
    1) During Idoc genration we are getting error related to Payment terms of Internal Customer.
    If the payment terms is immidiate then only an Idoc is getting generated,,,,,,,,, else it is throwing an error message " status 51", but according to our business requirements it may be for any days and this may also impact our aging analysis and cash flows.
    2) We have configured upto Third level of product hierarchy but while creating a contract if user maintains only upto first level, then release to account is not happening for inter company billing. Where as if user maintain upto third level there is no issue in the whole process of inter comapny billing.
    Kindly suggest us how to restrict user to maintain product hierarchy pto third level during the creation of contract.
    3) during the Inter company billing generation, if the internal customer is eligible for Tax exemption or tax booking, that is how to book the tax details to internal customer and also to vendor while booking the cost.Please let us know the logic for tax processign in Inter company billing and Idoc generation.
    Awaiting for a favourable reply and thanks in Advance.
    Regards,
    Upendra.

    Hello,
    Did you assign the internal customer to the ordering sales organisation? If not, then create a customer in Delivering Sales org + DC+ Div + Plant and assign the same in the ordering sales organisation.
    You can maintian the same in SPRO --> Enterprise structure --> Defenition --> Sales organisation (Enter internal customer).
    Or
    SPRO--> Sales and  Distribution --> Billing ---> Intercompany billing --> Define internal customer
    Prase

  • Changing Depreciation Key for Tax for closed fiscal years -

    Hello,
    Hoping someone can help me with this question - Is it possible to change the depreciation key for closed fiscal years - we need to change it for Tax - books. And if yes - does it mean we need to open closed fiscal years ??
    Thank you,
    Richa

    Hi,
    you will need to open the FI and AA periods. After changing the depreciation keys do the necessary dep run and close the books in the correct sequence.There should not be problem.

Maybe you are looking for

  • Logitech Marble Mouse scrollwheel emulation

    Before I open a Wiki account*, can anyone else confirm that it only works over USB? I can't remember how long I've had this thing, and I even have a vague feeling I came up against this problem before I installed Arch, but I always assumed I must hav

  • Issues automating dtsx packages

    Hello I am new to SSIS & SSAS. I have a DTSX package and I want it to execute every night. I can run the package manually using SSDT. However when I try executing the package using SQL Server Agent, the job fails. Package Source: File System Package:

  • Black levels and exporting

    Hey there- When I export anything through render cue using Lossless, Lossless with alpha or Custom Quicktime the black levels of the rendered file are 5-10 units high regardless of the program that I use to open it. I'm exporting to a local hard driv

  • My Site is right Aligned Instead of Centered

    I'm doing Building a Website with Web Premium CS4 tutorial. Everything is going great except the site is right aligned instead of centered. I think I missed a step in Fireworks. Can I fix it in Dreamweaver? Here's a link to the posted site. I've also

  • File read permision

    I have created simple method to check file have read permission or not its code of line of sample this file have no read and write permission File file = new File("A.xml"); try{if (file.canRead()) {      String filestr = FileUtils.readFileToString(fi