Facebook Chat Not Working Properly For iPhone 4

I recently bought the iPhone for, and am having a pretty annoying problem with the Facebook App.
So, in my Facebook, I have a group for my friends (one group). Now, when I'm on chat for my iPhone, I can not see ANY of those friends in the group online.
I read around a bit, and was advised to try unticking the group, so all my friends were shown in one list.
Did that, but still no luck..can't see people from that original group online.
Any advice?
Thanks in advance!

I've now gone as far as DELETING the list. So now, while on the computer, and under Facebook chat, ALL my friends appear under the same list.
Still have the same problem; can't see the friends from the old list when using my iPhone.

Similar Messages

Touch pad not working properly for iphone 4s

touch pad not working properly for iphone 4s. Few letters are not working at all and my phone ios slowly loosing touch sensitivity. I lost my phone and got the new phone 10 months back.

Try here > iPhone: Troubleshooting touchscreen response
Also go to settings>general>reset>rest all settings phone will turn off and turn on by itself
Once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on.
Update the software of your iphone or restore the phone to its factory settings

Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

Hi,
Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

Read here:
https://ssl.apple.com/support/iphone5-sleepwakebutton/

TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
<Edited By Host>

Hi , i bought this phone from Dallas , TX on 22 jun 2012 , right now I am in india . My phone Accidentally fall in water tub. And now is not working . For iphone replacement ,I went to local apple store in Pune (India). but these guys are not helping me

hi , i bought this phone from Dallas , TX on 22 jun 2012 , right now I am in india .
My phone Accidentally fall in water tub. And now is not working .
For iphone replacement ,I went to local apple store in Pune (India). but these guys are not helping me . And they are not ready to replace my phone .
I also tried contacting local apple employee named " RATI KALE " , but didn’t got any positive response.
I provided them apple invoice, passport, visa details, my air ticket details. but still they are not ready to help me . My phone details are as below :
Serial No:C8*******T9Y , IMEI : 01*************995
Please help me in replacing my phone.
<Personal Information Edited by Host>

Your warranty is only good in the US where you bought the phone. You will need to contact Apple Support in the US to arrange to return your phone to the US for repair. You should also inquire as to whether they will be able to return the phone to you in India.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.

All the sudden facebook chat not working anymore & any friend who appears as an icon on the side i cant send msgs to them!... i cleared the cookies & everything

hi there, my facebook chat all the sudden stopped & when i press on any of my friends icon to talk to it wouldnt appear! even i cant send them any msgs as long i have them as an icon on the side.
i cleared the cookies & the history, checked the jave every thing is working properly.
my second problem that the adobe flash player clashed sometimes, i deleted it & reinstalled it but no help.
i would appreciate any help
regards

In regards to your Facebook-related problems, please refer to the Facebook support page for help: https://www.facebook.com/help/?page=220217228006012
Personally, I can report that the chat sidebar works fine for me. However, we can't help you with that particular problem as Facebook provides that particular service.
In regards to the Adobe Flash Player plugin crashing, please refer to this page: http://support.mozilla.org/en-US/kb/flash-113-crashes
I hope you find a solution to your problem.
Sincerely,
Kristoffer

Java Script Code not working properly for visios in sharepoint 2013

Hi all ,
I have few visios and I am using the visio web part to display and to redirect from one visio to other visio I am using the java script code through content editor web part .
In share point 2010 it's working fine , I was able to redirect to all the visios and code is working fine .
In share point 2013 its not the same , Its not working properly . only for the first time the code is working fine . once it goes to next visio the code stops working .
For example if i click in visio A it gets redirect to Visio B and its stops working , it wont allow to do any other steps .
I have checked with the URL its correct , I am not able to find any error also .
Indresh

This will be likely caused by the Minimal Download Strategy not registering the Javascript on the page reload. You can turn off the MDS feature to test this.
You can either turn off MDS in your site, or register your Javascript functions with MDS to ensure they are called. To do this, you'll need all of your code to be wrapped in a javascript file (Embed this on the page using a <script> tag and
inside that file in a function, which you then register with MDS as follows (I usually do this in the first line of the javascript file):-
RegisterModuleInit("/SiteAssets/YourJavaScriptFile.js", NameOfYourFunction);
Regards
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

ITunes LP Bionic not working properly for iTunes

Christina Aguilera's new iTunes LP Bionic does not work properly on iTunes 9.1.1 on my MacBook Pro 13" running Snow Leopard on 64-bit mode.
It does work properly on iTunes on Windows 7 64-bit.
This is how it does not work properly: It does not automatically refresh the display content when I have clicked on a menu item. It only refreshes the display when I move the scroll bars along the display borders, thus invalidating certain region of the display content making the LP to redraw the display. As a result clicking on the menu items, such as Photos, Song List, Credits, and Discography, etc., do not have immediate effect. Needless to say it does not work at all in full screen mode as there is nothing that can be done to invalidate the display and get the LP to redraw.
Again it works properly on iTunes on Windows 7 64-bit so I would say it's an iTunes on Mac issue.

I actually am on a Dell running Windows 7 and am having issues downloading the iTunes LP from the store. It's in my downloads saved, but I'm getting a message saying: "Christina Aguilera Bionic (Deluxe Edition) iTunes LP was not downloaded. You do not have enough access privileges for this operation." Any ideas? It seems as though I'm having the opposite problem as most of you.

Next-Previous Do not work Properly for lengthly dynamic Where Clause

I have created a View object using Expert Query mode
with following Query:
SELECT LIC_SYS_ID,
LIC_NAME,
TERRITORIES,
LANGUAGES,
MEDIA,
SEGMENT_NAME,
CHANNELS,
ACTIVITY_CD,
LS.LIC_SHORT_NAME,
LS.LIC_AKA_NAME
FROM V_LICENSEE_SEARCH LS
ORDER BY LIC_NAME
Then at run time the following Where Clause staments get added by in JSP based on the users criteria
wClause = "(ACTIVITY_CD = '" + activityStatus + "')"
+ " AND " +
"(LIC_NAME like '" + licenseeName + "%' OR " +
" LIC_SHORT_NAME like '" + licenseeName + "%' OR " +
" LIC_AKA_NAME like '" + licenseeName + "%' ) "
In this case the DataScroller does not work properly It DataTable traves only one setp when I click the "Next" link, But if I use the Drop down list of the Scroller its works fine.
Secondly the "Next" "Previous" links of the DataScroller work fine if I use only one stmt in the WhereClause ex: "ACTIVITY_CD LIKE 'A%'".
Can anybody help me with this, Is this a limitation of DataScroller/DataTable/DataSource tags why does it not work??
Please help me its urgent.
Thanks a ton !!

Thx for the reply, I did try your suggestion It did not throw any exception. Here is the log messages after enabling jbo Debug.
[391] Reusing a cached session application module instance
[392] Getting a connection for internal use...
[393] Creating internal connection...
[394] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
wClause : (ACTIVITY_CD = 'A') AND (LIC_NAME like 'A%' OR LIC_SHORT_NAME like 'A%' OR LIC_AKA_NAME like 'A%' )
[395] Column count: 10
[396] ViewObject : Reusing defined prepared Statement
[397] $$added root$$ id=-2
[398] Application Module failover is enabled
[399] Getting a connection for internal use...
[400] Creating internal connection...
[401] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[402] <AM MomVer="0">
<cd/>
<VO>
<VO Sz="8" St="8" Def="com.sophoi.ipls.media.tv.businessentities.licensee.LicenseeView" Name="licenseeView">
<Wh>
<![CDATA[(ACTIVITY_CD = 'A') AND (LIC_NAME like 'A%' OR LIC_SHORT_NAME like 'A%' OR LIC_AKA_NAME like 'A%' )]]>
</Wh>
<Or>
<![CDATA[LIC_NAME ASC]]>
</Or>
</VO>
</VO>
</AM>Long postings are being truncated to ~1 kB at this time.

Airdrop not working properly between iphone 6plus & mbpr

Airdrop between my mbpr 2014 model running OS X Yosemite and my iphone 6plus running iOS 8, is not working properly, sometimes it works sometimes it doesn't. I have tried different wifi networks and it's always a struggle getting it to work. Even just between 2 is devices, my iphone and iPad i still can't get it to work. What could be the problem?

Sign out of iCloud on both devices and then sign into iCloud first on the Mac then the iPhone.

Date format is not working properly for Calender value help

Hi Experts,
We have two problems.
1. We want to change the format of date displayed. We want format of dd-MMM-yy. For that we have created one Simple
Type Dictionary Object with Displaying format dd-MMM-yy. It is working
fine for the non editable UI. But once I apply the dictionary type
object as data type for an input field, probem happens. Once the user
choose a date from calender value help the value in the input field is
coming like 01-011-12 not like 01-Jan-12.
The date format is not changing from the calender. But if we set the
display format of the dictionary object to MM-dd-yy or MM/dd/yy or
dd/MM/yy or dd-MM-yy the format conversion from calender to input field
is happening properly.
The only problem once we put MMM in place of MM for the input field
where user is selecting from a calender value help.
2. We want to restrict users from entering the value manually for date input field. The user
should be able only to enter value by selecting from calender value
help.
Please give suitable solution for these problems
Thanks
Shankha

Hi Sankha,
Please refer the links below:
http://scn.sap.com/thread/1659463
http://scn.sap.com/thread/1533443
Regards,
Manoj

Klipsch S4i headphones do not work properly with iPhone 5

I've got a really weird issue with my iPhone 5. I previously purchased an iPod Nano 16GB as well as Klipsch S4i headphones. The headphones has a console with 3 buttons. The topmost button is to increase volume and conversely, the lowest button decreases volume. No problem with either of these buttons.
The center button is operated by the number of times you push it. One push pauses the track (song) being played. A second push resumes play. Two pushes in a row causes the iPod to advance to the next track in the playlist. Three pushes in a row cause the iPod to go back to the beginning of the track being played. If you push three times consecutively then you go back to the track prior to the track which is being played, and so forth depending upon the number of times you keep pushing three times. With me so far? So the S4i console works just fine with the iPod.
However, the S4i console does not work well with the iPhone 5. I went to the Apple store this evening and they restored (reset?) the iPhone 5. I then restored the data to it from my computer once I got home. So the state of the S4i console is this. Push the center button once and it pauses. That is okay. Push the center button again and it resumes play. Still good.
Push the center button twice in a row and it sometimes advances to the next track. Not always unless you are very fast at depressing the button. Push the button three times and it may or may not go back to the beginning of the track. This seems to be a function of 'how fast' you are pushing the button. Literally, you have to be like Quick Draw McGraw on the darn button. That is not the case with the iPod Nano.
Pushing the button multiple times does not necessarily take you forward to the next track or at the start of the one playing or to the track before. While typing this, I managed to get the center button to work better so I thought maybe it is going out. But I don't experience that same problem with the iPod Nano and it was not a problem on the two tech's iPods/iPhones at the Apple store when tried with my S4i headphones attached. So I don't think there is any issue with the center button on the S4i's console or those headphones in general. I also don't think it is a hardware issue as the headphone jack does not seem loose. I have only been using my iPhone 5 for about a week.
In fact, I was able to get the advance function as well as the reverse function for going back to the beginning of the track to work by depressing the center button quickly but if you want to jump back a track then you really have to hit it quickly multiple times. In trying to go back to the beginning of a track or jumping back another or multiple tracks, then if the track you went back to the beginning of begins to play then the pushing three times maneuver does not work. I have no clue what is going on other than it has got to be a programming issue with the iPhone 5. Call me a cynic but I have my doubts that exchanging my new iPhone 5 is going to make a difference.
Moreover, on a number of occasions (more than 5) while playing tunes on the iPhone 5, it suddenly and randomly stops. This happened before the device was restored this evening and I have not had the opportunity to really test it out besides seeing if there is still an issue with the S4i headphones and the iPhone 5. I swear I did not touch or brush against the screen or depress any buttons when this occurred.
Has anyone got an idea what might be the problem? If so, I would be grateful if you could clue me in here.

Maybe it's a safty issue. You should not be able to watch movies while driveing anyway. Does it work when the car is in netral or park and the emergency brake is on. In my lexus thats the only way the front DVD will work.

SortcompareFunction is not working properly for more than 1 column in advanced datagrid

Hi Guys,
I am using an advanced datagrid with groupingCollection.
I have more than 1 grouped column. How ever I am using 2 sort compare function to sort date and time.
The problem is when I am trying to sort date its workinf properly then when I jump to time column its not working and sorting few rows only inside the column but not the entire column. samething happen when I sort time first and the date is not sorting.
any help will be really appriciable .
Thanks in advance.

In our application we tend to use views to return appropriate values for a particular user.
For example (we do building inspections) the publication item sql is like
select * from inspection_sites where id in (select site_id from v_pda_bi_sites where bi_id=:bi_id)
The view acts like a dynamic parameter table (in this cases looks at experience level, status of sites, and responsibility allocations). Once the driving views are tuned this works quite efficiently, and as the dependant tables for the publication item automatically includes all of the tables in the driving view, the object gets refreshed if there is any change to any of them, even if the site details themselves have not changed

Facebook chat not working

Why i can't use my facebook chat with i'm connected to WiFi...I'm using my Ipod touch 32gb and OS 4.0..thanks!

SBA-Mac, you gotta be joking with that reply. In case you are living on another planet, Facebook is a social media tool through which people communicate through wall posts, simple chat and private messages. It has nothing to do with video chat, and you don't need any kind of camera. It works just fine on iPod touch.
For the person who started this thread, you can update your Facebook app by launching App store on your iPod touch, and you will be prompted to update any apps that need to be updated, or open iTunes on your computer, log in with your credentials and click app updates if there are any. Sync your iPod after it's done.

Lightning to 30-pin Adapter not work properly with iPhone 5s

Lightning to 30-pin Adapter (0.2 m) with iPhone 5s working good with power adapter and 30-pin cable, but how iPhone at 100% power, I see message "This accessories is not working correctly".
But with iPad mini 1 everything is OK.

Bottom line, the iPhone case restricted insertion of the 8 pin adapter into the IPhone. Slide in cases with open bottoms have no problems but wrap around cases can restrict flush insertion due to insufficient access to the recepticle in the iPhone.

Facebook Chat Not Working Properly For iPhone 4

Similar Messages

Maybe you are looking for