Facing issue in Bulk Load Post Process in case of blank fields in csv file
Hi,
I ran command line bulk utility to create users in OIM through CSV file. I left few columns as blank which were not mandatory. After executing the bulk utility, user got successfully created in OIM but after that when i ran "Bulk Load Post Process" for LDAP sync then it changed the user's organisation to default organisation "Xellerate User" which is a major issue. It is happening only when i am leaving some column blank. Any idea why it is happening and how to resolve this problem? Need some urgent help!!
Hi ,
Thanks for your reply, the issue was we can not use DOD=Y due to the dependency of the Standard Version where other program fetches data from the same XML structure,
Any way we resolved this issue by re doing below post installation steps. And used a new schema with updated DTD and point that with the same logical schema.
1) Created a new schema for XML external database
2) Change the DTD file, keep it in the same location
3) Change properties file with new schema name
4) Test with the new schema for XML connection
5) Reverse engineer the BaseModel ITEMBRANCH only (Where we added additional XML Tags)
6) Bounce back ODI agent and Client
Thanks,
Pc
Similar Messages
-
Issue with Bulk Load Post Process
Hi,
I ran bulk load command line utility to create users in OIM. I had 5 records in my csv file. Out of which 2 users were successfully created in OIM and for rest i got exception because users already existed. After that if i run bulk load post process for LDAP sync and generate the password and send notification. It is not working even for successfully created users. Ideally it should sync successfully created users. However if there is no exception i during bulk load command line utility then LDAP sync work fine through bulk load post process.Any idea how to resolve this issue and sync the user in OID which were successfully created. Urgent help would be appreciated.The scheduled task carries out post-processing activities on the users imported through the bulk load utility.
-
Issue with Bulk Load Post Process Scheduled Task
Hello,
I successfully loaded users in OIM using the bulk load utility. I also have LDAP sync ON. The documentation says to run the Bulk Load Post Process scheduled task to push the loaded users in OIM into LDAP.
This works if we run the Bulk Load Post Process Scheduled Task right away after the run the bulk load.
If some time had passed and we go back to run the Bulk Load Post Process Scheduled Task, some of the users loaded through the bulk load utility are not created in our LDAP system. This created an off-sync situation between OIM and our LDAP.
I tried to use the usr_key as a parameter to the Bulk Load Post Process Scheduled Task without success.
Is there a way to force the re-evaluation of these users so they would get created in LDAP?
Thanks
KhanhThe scheduled task carries out post-processing activities on the users imported through the bulk load utility.
-
Retry "Bulk Load Post Process" batch
Hi,
First question, what is the actual use of the scheduled task "Bulk Load Post Process"? If I am not sending out email notification, nor LDAP syncing nor generating the password do I still need to run this task after performing a bulk load through the utility?
Also, I ran this task, now there are some batches which are in the "READY FOR PROCESSING" state. How do I re-run these batches?
Thanks,
VishalThe scheduled task carries out post-processing activities on the users imported through the bulk load utility.
-
ECC 5.0 database instance install error in database load (post processing)
HI all!
The installation of the environment :
VM SERVER v1.03
ECC 5.0 /WINDOWS SERVER 2003
SQL SERVER 2000 SP3
DB INSTANCE install occur error in database load (post processing) step:
sapinst.log:
INFO 2008-10-16 14:20:54
Creating file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\keydb.5.xml.
ERROR 2008-10-16 14:22:29
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.log
ERROR 2008-10-16 14:24:59
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL2.log
ERROR 2008-10-16 14:24:59
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.log
ERROR 2008-10-16 14:26:30
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPPOOL.log
SAPSSEXC.log:
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142100
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: D010INC deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: EndFastLoad failed with <2: Bulk-copy commit unsuccessful:3624 Location: rowset.cpp:5001
Expression: pBind->FCheckForNull ()
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: D010TAB deleted/truncated
SAPAPPL2.log
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142130
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL2.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL2.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: AGR_1250 deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: import of AGR_1250 completed (139232 rows) #20081016142200
(DB) INFO: AGR_1251 deleted/truncated
(IMP) INFO: EndFastLoad failed with <2: Bulk-copy commit unsuccessful:2627 Violation of PRIMARY KEY constraint 'AGR_1251~0'. Cannot insert duplicate key in object 'AGR_1251'.
3621 The statement has been terminated.>
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: AQLTS deleted/truncated
(IMP) INFO: import of AQLTS completed (17526 rows) #20081016142456
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: END OF LOG: 20081016142456
SAPSDIC.log:
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142230
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: DD08L deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed:3624 Location: p:\sql\ntdbms\storeng\drs\include\record.inl:1447
Expression: m_SizeRec > 0 && m_SizeRec <= MAXDATAROW
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: END OF LOG: 20081016142437
SAPPOOL.log:
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142530
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPPOOL.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPPOOL.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: ATAB deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed:3624 Location: p:\sql\ntdbms\storeng\drs\include\record.inl:1447
Expression: m_SizeRec > 0 && m_SizeRec <= MAXDATAROW
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: END OF LOG: 20081016142621
please help! thanks!VM SERVER v1.03
can you please tell me what you mean with that? VMWare? Is that ESX-Server?
(DB) INFO: connected to DB
(DB) INFO: ATAB deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed:3624 Location: p:sql
tdbmsstorengdrsinclude
ecord.inl:1447
Expression: m_SizeRec > 0 && m_SizeRec <= MAXDATAROW
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: ExeFastload: rc = 2
I´ve seen those load problems under VMWare and on boxes hosted as Xen VMs.
Markus -
Database instance install error in database load (post processing)
hi
i'm facing these errors during the ECC installation the operating system is Windows 2003 server database is oracle 9.2.
Error occured in database load (post processing) step
ERROR 2009-12-19 01:23:50
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPCLUST.log
ERROR 2009-12-19 01:49:20
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.log
ERROR 2009-12-19 04:08:20
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.logHi
(RFF) ERROR: invalid checksum in data file "E:/DVD2/EXPORT2/DATA/SAPCLUST.001";
current table was "EDI40"
Your install software is corrupt....
Did you copy the software to disk ? If so did you copy accross in binary mode ...
Mark -
Error in Database Load (post processing)
Hi, i have a problem when install the Database Instance. In the step "Database Load (post processing)". Error:
ERROR 2007-01-16 18:33:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:33:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:34:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:34:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:54
FJS-00012 Error when executing script.
And I want to open the file SAPVIEW.log for check the error, but the file size is 300Mb.
Help me, please.
Jonu00E1300 MB? are u sure? this is way too much imho...as i see you install sqlsrv (= win)...you can find a tail like tool for windows under http://tailforwin32.sourceforge.net ... but somehow i doubt you will succeed to load the file...
-> which sap rlz you're installing?
GreetZ, AH -
Database load (post processing)
Hi sap gurus,
I am installing ECC 5.0 database instance . from past 15 hours it is still at database load (post processing). can u please tell me how long it will take to complete whole installation.
thanks
vijayTime it takes to do the database load is highly dependent on your system's CPU, RAM and disk IO.
On a real production type server it could be several hours, on a desktop type machine 15 to 20 hours would not be uncommon. -
Load data with SQL Loader link field between CSV file and Control File
Hi all,
in a SQL Loader control file, how do you specify link with field in CSV file and Control file?
E.g. if I wat to import the record in table TEST (col1, col2, col3) with data in csv file BUT in different position. How to do this?
FILE CSV (with variable position):
test1;prova;pippo;Ferrari;
xx;yy;hello;by;
In the table TEST i want that col1 = 'prova' (xx),
col2 = 'Ferrari' (yy)
col3 = default N
the others data in CSV file are ignored.
so:
load data
infile 'TEST.CSV'
into table TEST
fields terminated by ';'
col1 ?????,
col2 ?????,
col3 CONSTANT "N"
Thanks,
AttilioWith '?' mark i mean " How i can link this COL1 with column in csv file ? "
Attilio -
OIM 11g - Issue with Bulk Load Utility for Account Data
Hi,
We are trying to load the account data for users in OIM 11g using bulk load utility.
We are trying to load the account data for resource "iPlanet". For testing purpose, we made one account entry in csv file and run the bulk load utility. After the bulk load process completes, we have noticed that resource is provisioned to the user multiple times and multiple entries have been created in process form table.
We have tried to run the utility multiple times with a different user record each time.
The out put of the below sql query:
SELECT MSG FROM OIM_BLKLD_LOG
WHERE MODULE = 'ACCOUNT' AND LOG_LEVEL = 'PROGRESS_MSG'
ORDER BY MSG_SEQ_NO;
is coming as follows:
MSG
Number of Records Loaded: 126
Number of Records Loaded: 252
Number of Records Loaded: 504
Number of Records Loaded: 1008
Number of Records Loaded: 2016
Number of Records Loaded: 4032
We have noticed that each time the number of records loaded is increased to double from the records loaded in last run even when the csv file contains only one record.
Provided below are the parent and child csv file entries.
Parent file:
UD_IPNT_USR_USERID,UD_IPNT_USR_FIRST_NAME,UD_IPNT_USR_LAST_NAME,UD_IPNT_USR_COMMON_NAME,UD_IPNT_USR_NSUNIQUEID
KPETER,Peter,Kevin,Peter Kevin,
Child file 1:
UD_IPNT_USR_USERID,UD_IPNT_GRP_GROUP_NAME
KPETER,group1
Child file 2:
UD_IPNT_USR_USERID,UD_IPNT_ROL_ROLE_NAME
KPETER,role1
Can you please throw some insight on what could be the potential cause for this issue and how it could be resolved?
Thanks
Deepa
Edited by: user10955790 on Jun 25, 2012 6:45 AMHi Deepa,
I know from 'User load' perspective that is required to restart Oracle Identity Manager when we need to reload data that was not loaded during the first run.
So, my suggestion is restart it before reload.
Reference: http://docs.oracle.com/cd/E21764_01/doc.1111/e14309/bulkload.htm#CHDEICEH
I hope this helps,
Thiago Leoncio. -
Please HELP! issue with BULK LOAD in FDM 11.1.2.1
Please assist with a solution to the following error!
See log below
** Begin FDM Runtime Error Log Entry [2011-10-07 13:43:39] **
ERROR:
Code............................................. -2147217900
Description...................................... You do not have permission to use the bulk load statement.
BULK INSERT POLFDM..tWkalnic158050364335 FROM N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic158050364335.tmp' WITH (FORMATFILE = N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic158050364335.fmt',DATAFILETYPE = N'widechar',ROWS_PER_BATCH=221593,TABLOCK)
Procedure........................................ clsDataManipulation.fExecuteDML
Component........................................ upsWDataWindowDM
Version.......................................... 1112
Thread........................................... 5036
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:43:40] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpDataPump.fImportTextFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 5036
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:43:40] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 5036
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:55:38] **
ERROR:
Code............................................. -2147217900
Description...................................... You do not have permission to use the bulk load statement.
BULK INSERT POLFDM..tWkalnic46564644597 FROM N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic46564644597.tmp' WITH (FORMATFILE = N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic46564644597.fmt',DATAFILETYPE = N'widechar',ROWS_PER_BATCH=221593,TABLOCK)
Procedure........................................ clsDataManipulation.fExecuteDML
Component........................................ upsWDataWindowDM
Version.......................................... 1112
Thread........................................... 4644
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:55:38] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpDataPump.fImportTextFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 4644
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:55:39] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 4644
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... FalseHave you read the installation documentation? It appears that you did not take the time to do a basic level of troubleshooting. A simple Google search of the error message provides the root problem as well as the solution.
The forums are intended to be used when you have exhausted other options. Please be mindful of this and contributors time when posting further questions.
I have attached a google search result for the error "You do not have permission to use the bulk load statement."
http://www.google.com/#sclient=psy-ab&hl=en&safe=off&site=&source=hp&q=+You+do+not+have+permission+to+use+the+bulk+load+statement.&pbx=1&oq=+You+do+not+have+permission+to+use+the+bulk+load+statement.&aq=f&aqi=g4&aql=&gs_sm=e&gs_upl=1556l1556l0l2633l1l1l0l0l0l0l184l184l0.1l1l0&bav=on.2,or.r_gc.r_pw.r_cp.,cf.osb&fp=ebaa3ff8b466872e&biw=1920&bih=955 -
OIM Bulk Load utility(Process Form Updates)
Hi All,
I am wondering whether OIM bulk laod Utitly is capable of Updating the Accounts(Targer Recon) in OIM(Updates in Process form)?... I was checking the oracle doucment and it doe not say anything about Updating the records in OIM it says of creating the accounts. Please guide me.
Thanks in advance
Saravani
Edited by: 918661 on Mar 4, 2012 7:47 PMDon't worry. Utility support both feature
1. Trusted recon - reconcile from trusted source(csv, databse.etc.) to OIM user profile
2. Target recon - reconcile target account to OIM Process Form . for this you must have their coressponding user exist in OIM.
For further details go through below doc.
http://docs.oracle.com/cd/E14899_01/doc.9102/e14763/bulkload.htm#CHDCGGDA
Section "15.5 Loading Account Data" will clarify your doubt
--nayan -
Notifications are not being sent when Bulk Load is done
Hi All,
I have OIM 11g setup on my machine. I use the bulk load utility for loading the user data. Now in my OIM setup, the notifications are being sent for all stuff like Reset Password. New account creation and other. However when I bulk load the users, notifications are not sent to their mail ids. I am running the scheduled job "Bulk load Post Process" which is necessary so that the users are synced to the LDAP repository. I have the LDAP Sync option checked and also the Notifications option set to yes in this scheduled job. Though the users are loaded successfully and are synced properly, the notifications are not sent. Can some one please guide me as to what could be the problem here?
Thanks,
$idThe code is probably only called in the Event method of the event handler that sends the notification. You can check the mds files and find the notification you are looking for and then use a code decompiler to find the class that is called. You can then use this code as a sample, or write your own notification code and create an event handler that runs in the BulkEvent.
And on another note there is also this System Configuration Variable: Recon.SEND_NOTIFICATION which is set to FALSE by default.
-Kevin -
CBO madness after bulk loading
This is an extension of my other recent posts, but I felt it deserved it's own space.
I have a table of telephone call records, one row for each telephone call made or received by a customer. Our production table has a 10-field PK that I want to destroy. In my development version, the PK for this table is a compound key on LOC, CUST_NO, YEAR, MONTH, and SEQ_NO. LOC is a char(3), the rest are numbers.
After a bulk load into a new partition of this table, a query with these 5 fields in the where clause chooses a second index. That second index includes LOC, YEAR, MONTH, and two other fields not in the PK nor in the query. The production instance does the same thing, and I was certain that having the 5-field PK would be the magic bullet.
Oracle SQL Developer's autotrace shows a "Filter Predicates" on CUST_NO and SEQ_NO, and then the indexed range scan on the other 3 fields in the second index. Still noteworthy is that query on just LOC, CUST_NO, YEAR and MONTH does use the PK.
Here are the steps I've taken to test this:
1. Truncate the partition in question
2. Drop old PK constraint/index
3. Create new PK constraint/index
4. Gather table stats with cascade=>TRUE
5. Bulk load data (in this case, 1.96 million rows) into empty partition
6. autotrace select query
7. Write to dizwell in tears
This table also has two other partitions for past two cycles, each with around 30 million row.
Yes, gathering table stats again makes things behave as expected, but that takes a fair bit of time. For the meantime we've put an index hint in the application query that was suffering the most.First, the CBO doesn't actually choose a full table
scan, it chooses to use a second index.Depending on the query, of course. If the CBO thinks a partition is empty, I would suspect that it would find it most efficient to scan the smallest index, and the second index, with fewer columns, would be expected to be smaller. If it thinks they are equally costly, I believe it will use the one that was created first, though I wouldn't want to depend on that sort of failure.
I've lowered the sample percentage to 10% and set
CASCADE to FALSE and it still take 45 minutes in
production. The staging table was something I was
considering.
Are statistics included in partition exchange? I've
asked that question before but never saw an answer.Yes, partition-level statistics will be included. Table-level statistics will be automatically adjusted. From the SQL Reference
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_3001.htm#i2131250
"All statistics of the table and partition are exchanged, including table, column, index statistics, and histograms. Oracle Database recalculates the aggregate statistics of the table receiving the new partition."
You could also just explicitly set table-level statistics, assuming you don't need too many histograms, possibly gathering statistics for real later on.
Justin -
How to UPDATE a big table in Oracle via Bulk Load
Hi all,
in a datastore target as Oracle 11g, I have a big table having 300milions of record; the structure is One integer key + 10 columns attributes .
In IQ Source i have the same table with the same size ; the structure is One integer key + 1 column attributes .
What i need to do is to UPDATE that single field in Oracle from the values stored in IQ .
Any idea on how to organize efficiently the dataflow and the target writing mode ? bulk load ? api ?
thank you
MaurizioHi,
You cannot do bulk load when you need to UPDATE a field. Because all a bulk load does is add records to your table.
Since you have to UPDATE a field, i would suggest to go for SCD with
source > TC > MO > KG >target
Arun
Maybe you are looking for
-
Apple devices will no longer recognize home wireless network
After returning from a week's vacation, I am having difficulty getting my Apple devices (iPads, iPhones, MacBook Pros, etc.) to connect to our home wireless network. I have tried resetting the router and modem numerous times, restarting the devices,
-
Extended Classic Scenario - Can Purchase Requsition be created in R/3?
Hi SRM Gurus, In Extended Classic Scenario, Is it possible to have Purchase Req to be created in the backend? Technically whether it is possible or not? Functionally, there is no such need, I agree. Thanks & Regards, Ramkumar
-
Any 2 buttons work, any 3 don't?
Hi everyone, I'm finding some unintended results from buttons on my site, and there seems not to be a logic that I can just fix. The site is arcotecture.info if you wouldn't mind taking a look. On pages such as "(r)Evolve" and "undo," there is a vert
-
How batch export layers to files in CS5
Hi, I am a newbie in CS5 , I tried to batch export layer to files in CS5 , because I have thousands PSD files that I need to export layers in separated png files.. In each script I made I have the following error.." reference error: dlgMain is not
-
Hey gang- Has anyone seen this before? I have a 2-year old 5 meg Canon SD450 Digital Elph. When viewing some pictures I took this week in iPhoto 8, I noticed a small, bright spot on each picture. I was afraid that I had suddenly developed a dead scre