I get "ordinal 5 (and at times 18) is not found when trying to start the application? Using windows Vista Business.

when starting the application I get the following message "ordinal 5 ( and at times 18) can not be found in the dynamic link libray" I'm using a Lenovo x300 with "Vista Business"

Have you tried to put the Main-Class under a package (e.g. move LaunchSimulator to org.jyothi.sunke.LaunchSimulator or something)? I'm not sure but it's possible that Main-Class can't be located in the "root package", because the JAR launcher can't address it.
Always put your stuff in a package, otherwise it can't be addressed by other packaged classes.
- Erik

Similar Messages

Installed itunes update 10.5.0.142 and now get the error message "Disc Burner or Software Not Found" when trying to burn playlist to disc.

Installed itunes update 10.5.0.142 and now get the error message "Disc Burner or Software Not Found" when trying to burn playlist to disc. Windows 7

Hello queenabs,
It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found." I found a couple of resources that I think might help with an error like this.
I recommend starting with the steps in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M.

I purchased Illustrator for one month but when trying to run the application, it asks me to "renew the subscription". I tryed to reload illustrator two times and reloaded CreativeCloud but still it doesn't work. What else can I try? I need AI immediately

I purchased Illustrator for one month but when trying to run the application, it asks me to "renew the subscription". I tryed to reload illustrator two times and reloaded CreativeCloud but still it doesn't work. What else can I try? I need AI immediately for work

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

I keep getting result code -43 not found when trying to load certain instruments. Any idea why

I keep getting error code -43 not found when trying to load certain instruments. Any ideas?

Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

Keep getting Disc Burner or software not found when trying to burn a CD

I am not able to burn a playlist to a CD and get an error at the top of Itunes window "Disc Burner or Software Not Found". I have been able to burn CDs in the past with this same computer but had some issues with songs in itunes. Support had me uninstall Itunes and reinstall. I have also uninstalled the device in the device manager and re-installed it. I really don't know what to try except to ask for help here. I would appreciate any direction I can get. I have a Dell desktop XPS running on Windows 8.

Hi daurel,
Thanks for participating in the Apple Support Communities.
It sounds like you receive the error "Disc Burner or Software Not Found" when trying to burn CDs. You mention that you've already tried removing and reinstalling iTunes, and other drivers, and these are good steps.
If the situation continues, be sure to try the tips in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install - Apple Support
Sincerely,
Jeremy

HT1923 did anyone get the apple application support was not found when trying to instal?

I am having trouble instaling itunes. has anyone got the apple application support was not found when trying to instal itunes? it looks like it is not installing all of files to my computer and it can not reach a certain folder

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Error oracle.sql.* and oracle.jdbc.driver.* not found when using oracle as a database

I am using oracle as database and weblogic 4.5. I have copied the classes12.zip file in lib directory of weblogic. I am getting the error that oracle.sql.* and oracle.jdbc.driver.* not found when i am importing these packages in a jsp file. what i need to do to import oracle driver packages?I put it in the classpath also.
Please Advice!
Thanks in advance
AnuPama

Hi Anupama,
First of all I would be surprised if you would not like to use the connection pooling feature of weblogic (in which case you might not be needing the import the classes directly), and would like to open direct connections to your database. Anyways for doing that I would recommend you to check out the readme doc that ships
along with the jdbc oracle (classes12.zip etc). I am giving an excerpt over here:
These are a few simple things that you should do in your JDBC program:
1. Import the necessary JDBC classes in your programs that use JDBC.
For example:
import java.sql.*;
import java.math.*;
2. Register the Oracle driver before before calling other JDBC APIs.
(This is not needed if you are using the JDBC Server-side Internal
Driver because registration is done automatically in the server.)
To register the Oracle driver, make sure the following statement
is executed at least once in your Java session:
DriverManager.registerDriver(
new oracle.jdbc.driver.OracleDriver());
3. Open a connection to the database with the getConnection call.
Different connection URLs should be used for different JDBC
drivers. The following examples demonstrate the different URLs.
For the JDBC OCI8 Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:oci8:@<database>",
"scott", "tiger");
where <database> is either an entry in tnsnames.ora or a SQL*net
name-value pair.
For the JDBC Thin Driver, or Server-side Thin Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:thin:@<database>",
"scott", "tiger");
where <database> is either a string of the form
<host>:<port>:<sid> or a SQL*net name-value pair.
For the JDBC Server-side Internal Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:kprb:");
Note that the trailing ':' character is necessary. When you use
the Server-side Internal Driver, you always connect to the
database you are executing in. You can also do this:
Connection conn
= new oracle.jdbc.driver.OracleDriver().defaultConnection();
Hope this helps,
Thanks,
Anupama wrote:
I am using oracle as database and weblogic 4.5. I have copied the classes12.zip file in lib directory of weblogic. I am getting the error that oracle.sql.* and oracle.jdbc.driver.* not found when i am importing these packages in a jsp file. what i need to do to import oracle driver packages?I put it in the classpath also.
Please Advice!
Thanks in advance
AnuPama--
Apurb Kumar

Why do I keep getting actionlist not found when trying to update to version 11.6.602.180?

WHy do I keep getting actionlist not found when trying to update to update to version 11.6.602.180?

This problem and others are outlined in this help document. In addition, please try installing from the appropriate stand alone Windows installers located here:
Installation Problems - Flash Player - Windows

I updated my 3gs and it wiped all my apps, now when trying to rebuy the apps it is asking for a postcode(i live in ireland where there are none)and it also will not accept my payment card type.any help greatly appreciated

I updated my 3gs and it wiped all my apps, now when trying to rebuy the apps it is asking for a postcode(i live in ireland where there are none)and it also will not accept my payment card type.any help greatly appreciated

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?

I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?

Thanls Ernie. I found the solution. My problem was previous to 10.10.3. It looks like the installation of final cut and uninstallation of fcp delte a plugins that was needed for Aperture. I recover from time machine my plugins in Library/frameworks/plugin.manager.framework and now Aperture works ! Ouf....

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

The application Install.app can't be opened. -1712

HT1212 My phone is disabled because of entering an incorrect password several times. iTunes will not connect when trying to restore the phone Can you help?

My phone is disabled because of entering an incorrect password several times. iTunes will not connect so that I can restore the phone. What more can I do to get my phone back up and running? Thank you

I do not understand how to remotely wipe the phone using icloud, find my phone or my apple id and password. Kindly explain step by step as I am an older individual and I am confused

Getting error "Object variable or with block variable not set" when trying to open a FR report in studio

Problem Description
We are on FR 11.1.2.2.305 installed on AIX. a user is getting this error: "Object variable or with block variable not set" when trying to open a FR report from FR studio client installed on windows xp . Initialy, we thought it may be a FR client installion issue. We uninstalled and cleaned up registry and did a fresh installation of the client but the issue still persists. The FR server and the client are on the same version.
The user is a LDAP user who is facing the issue. We have confirmed with other users and they dont have any issue accessing FR report from their own client but when they try to connect from the users machine who is having issues, the others users also see the above error. All the users are ldap users and all belong to same shared services groups so the provisiong is the same.
Any input will be appreciated.
Thanks

OK, in this case of one single computer, please make sure that settings as per below KB document as in place and then validate the issue:
Internet Explorer (IE7, IE8, IE9 and IE10) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
The information in this document applies to the following Enterprise Performance Management products:
    Calculation Manager
    Data Relationship Management (DRM)
    Enterprise Performance Management Architect (EPMA)
    EPM Workspace
    Essbase Administration Services (EAS)
    Financial Data Quality Management (FDM)
    Financial Management (HFM)
    Financial Reporting
    Foundation Services
    Interactive Reporting
    Planning
    Shared Services
    Web Analysis
Thanks!

Time Machine Restore and now says Scanner not found - when trying to use

the printers.
Had a faulty harddrive -(per the apple store - this after replacing the screen and logic board...) - so they installed a new one - I restored from my time machine backup - and then went to use my HP 1315 Scanner. Didn't work - get error - scanner not found - even though I can print to the device.
So - I uninstalled and reinstalled the printer in the system preferences - but get same error - so instead I uninstalled all the HP apps and reinstalled them (a pain because HP doesn't make 10.5 software yet).
Still same issue - Scanner not found.
I was using this same scanner prior to the hard drive freeze. HP posts a notice that if you really want the hp software to work you should downgrade to Tiger, install, then reupgrade - but that seems like a lot of hassle to get a scanner to work.
Does anyone have another suggestion?

Thanks Barry -
I wish Profile allowed to list all of my computers and all of My OS systems - but it doesn't - so I'm forced to post each and every time whatever OS is causing whatever issue I'm having.
I have deleted and reinstalled several times to no avail. I do get an error on install that the HPIOX cannot launch...
I am a bit frustrated - this is the 5'th device an Apple upgrade has cost me...
All my belkin devices for my iphone don't work with the new iphone (they altered a pin configuration for the power)
The 1,000 upgraded car kit for Mercedes that I bought just a month ago -- worked great with Iphone 2g - doesn't charge the 3g
Leopard has killed my scanning capabilities...
It wouldn't be such a hard pill to swallow except I keep seeing that ad where the japanese girl comes by and the Mac guy starts talking japanese and the tag line "it just works" -
No - in fact - it doesn't.
My camera only shares pictures with the mac - movies require a 3 way translation
My printer will print - but not scan
My Mercedes car kit will play music - but not charge
All of these things worked with Tiger and Iphone 2g - seems to me like either Apple is trying to force profitability of its partners by forcing consumers to constantly upgrade to new equipment - or - they just don't give a s_t ----

File not found when trying to call a dll on LabVIEW Real Time machine

I have a dll called "DLLRTTEST" that I've written, and have succesfully called on my host machine. I'm now attempting to call this dll from a vi that is located on my real time computer. Currently I get an "Error 7 occurred at Call Library Function Node in DLLRTTEST.vi." message upon execution
In the attached screenshot I'm trying to ensure that the vi I'm running is in fact located on the real time system. I then use a "Check if File or Folder Exists.vi" to confirm that the dll that I'm about to call does exist on the real time system as well. However, I still receive an "error 7 file not found" error from the Call Library Function Node.
Any help is appreciated.
Solved!
Go to Solution.
Attachments:
DLL_Call_Screenshot.png ‏61 KB
DLL_Call_Screenshot.png ‏61 KB

As nathand already mentioned, depending on your C toolchain your DLL will depend on other DLLs. Usually the according msvcrtXX.dll that matches your Visual C version, if you use Visual C, other runtime DLLs if you use a different C environment. These runtime DLLs are even necessary if you do not call anything in any of your functions, since the DLL makes various initialization steps when it gets loaded and that references some C runtime functions nevertheless. Compiling and linking the DLL with static C runtime is usually also not a clean solution since the linked in C runtime will then reference Windows APIs that are not available on LabVIEW RT.
Depending on your version of LabVIEW RT you will have some mscvrtxx.dll files in your system directory but it will be an older one than from the latest Visual Studio version. If you can compile your DLL with that Visual Studio version then you should be fine, but could possibly run into new problems if you later upgrade to a newer LabVIEW RT version. Installing the C runtime distributables from newer Visual Studio versions is unfortunately also not a solution, since it references many (undocumented) Windows API functions that are not available in LabVIEW RT.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

I get "ordinal 5 (and at times 18) is not found when trying to start the application? Using windows Vista Business.

Similar Messages

Maybe you are looking for