Fade to black between slides in slideshow, HOW in Lr 5.4???

I'm using Lr 5.4.
How do I do a simple fade to black between images in a slideshow? I don't want a dissolve. Many thanks for your pointers.
gocat9

As part of your testing make sure you've tried exporting JPGs from the same folder as the CR2s you're exporting as original, and export JPGs from CR2s to the same folder as you're exporting your originals. This would test LR's read and write permissions from and to the folders being used.
From this document you can see that all the LR files other than the program, are under the /Users folder with different values possible for each user, so the difference could be that the users that work are using the original LR defaults, if you have just started using LR with them after you started having this problem, or at least that the user with the problem has some oddball settings that are interfering with Export as Original.
Preference and other file locations in Lightroom 5
You can test for the Preferences being off by either copying the preferences from a user that has the problem to a user that doesn't have the problem--probably through an external or common folder, or be deleting the preferences file from the user that has the problem and see if it resolves. Moving the preferences file or renaming it may be better than deleting it if no change is seen, then you can restore the preferences back by moving or renaming the file back to the original location and name.

Similar Messages

How do I "fade to black" between clips

Hi All, I want to add a 'fade to black' effect when going from one clip to another and I can't figure out how. Can anyone help? Thanks.

Sorry, I have QT Pro.

Pesky WHITE SCREEN in between Slides during Slideshow

Hi,
So i set up a presentation and to view my work i'll go to Slideshow and it appears like this...
Click Spacebar - White screen
Click Spacebar - Slide 1
Click Spacebar - White screen
Click Spacebar - Slide 2
Click Spacebar - White screen
Click Spacebar - Slide 3
Basically there's a blank screen in between my slides! Is this a setting that can be turned off? The tutorial videos i've watched never have this pesky white screen.
How do I fix this?
R

Ok, I know this is an older post, but for those of you, like me, who ran into to the same issue and ran across this post, here is the answer.
The flashing is caused by PPT slide transitions. Highlight all your slides, right click, select None for transitions and re-import.
**sigh** lessons learned.

Flickering between slides

Hello,
I am using Captivate v.6.0.1.240
I've read the forum and many seem to have the issue with flickering slides.
Aside for adding a fade-in transition between slides in Captivate (does not work for me), is there another solution or released patch?
Thank you for your help.
Donglin

Adobe wants my money.

How do I fade to black in a slideshow?

It's been years since I've used Flash, so I'm a bit rusty.
But I am trying to use the slideshow presentation template and do
transitions between the slides, but I'm not getting the results I
want.
I'm putting in the preset behaviors for fade in and out, and
what I get is a crossfade. What I want is a fade to black, and a
fade up from black (a dip to black), and not a crossfade. Is there
a simple scripting way to do this that I can put on the
presentation (master) slide? If been playing with setInterval to
delay the transition but I can't get it to work. Thanks.

Add a "Fade Through Black" transition after your last clip.
For the volume fade, you can drag the Fade handles.
See this video for details. (Click on All New Audio Editing)
http://www.apple.com/ilife/video-showcase/

Stopping the Fade to Black on Ken Burns Slide Show?

I am trying to make a slideshow using the Ken Burns template. I want to be able to make a loop-able file (.mov or other), so I can make a looping DVD. At the end of my sideshow, there is a one second fade to black - Is there any way to stop that fade out or is there another way to do this effect without the fade out?
Thanks in advance!

Welcome to the forum
Select the final slide and change the transition to "none" in the transition drop down menu
DLS
!http://dlsphoto.com/a3SlideTrans.jpg!

Finder built-in slideshow blinks after fade-to-black before starting

When I start a slideshow from Finder, the screen fades to black smoothly, but then when it's black, it blinks back to normal view for few millisecs before starting the slideshow. This makes the fade-to-black totally non-effective.
The effect is the same when changing resolution (the screen blinks on for a while). Anyone else has this?
It's not visually nice at all. How to get rid of it?

This frequently helps solve some problems. Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
You'll need to reset some Preferences.

Slideshow: How can I stop on the last slide?

How can I get my slideshow to stop on the last slide? I set the slide to stop as the end action, but it goes to a black screen.
Anyone know how I can do this?

Slideshows slides are timed by default.
If you want the last slide to freeze, set it to Manual Advance in Slide properties. Then it will hold the last slide until the user hits the Next/Previous buttons (if they figure that out on their own, that is...you might want to post an instruction of some kind on the slide).

I am using photos . I add a camera and make my photos slide in. How do I add a second behavior to the photo to make it slide out. I want the photo to hold on the screen for a few seconds in between sliding in and sliding out.

I am using photos in Motion 5. I add a camera and make my photo slide in. How do i add a second behavior to the photo to make it slide out? I want the photo to hold for a few seconds in between sliding in and sliding out. When I am trying to do this I am not getting the photo to hold, i am making one continuous motion which I do not want.
Thanks

Are you using the "motion path" behavior? If so just duplicate it and drag it down the timeline to where you want it to start. Trim it to end at the end of the project. The gap you leave in the timeline between the two behaviors is your hold time. Not sure why you are using a camera unless you have a behavior on the camera.If you are using keyframes just set two keyframes at the same position values in the inspector for the hold time.

"Fade Through Black" transition in slideshows corrupts project!

I built a project from the ground up in iMovie. Shared this to iDVD. Constructed the whole dvd including a slideshow. When I clicked on "Fade Through Black" in the transitions menu for slideshows, iDVD abruptly quit with no error message! Completely quit.
I tried to open the project by double-clicking it and it would bring up a prompt saying "Loading themes", then show the iDVD window for a split second and quit again.
I tried making the iDVD project twice. With different themes each time, and still got the same result when I clicked on the "Fade Through Black" transistion. I had even saved the file right before clicking the transistion. That didn't help at all...

This frequently helps solve some problems. Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
You'll need to reset some Preferences.

Using final cut pro x how to fade to black

with final cut pro x, how do you fade to black?

So, at this point I feel compelled to throw out a few 'pearls of wisdom' for the self-taught beginners who use this forum;
It IS a place to come for expert advice from a mix of enthusiasts and professionals, and yes, you can get problems solved here that you won't find answers to anywhere else (with the possible exception of Creative Cow). Some problems get answered better here than from Apple Support.
This does not mean that you (the beginner) are absolved from a little study on your own. BROWSE the forum a little before you ask a question - you may even discover something that you didn't even know that you didn't know.
Speaking of youtube; take a look at the Izzyvideo tutorial or some of the others posted there. Learn the basics, and then ask a question. If we are willing to take the time to answer questions, then you should (at least!) be willing to take the time to do a little research.
If you don't have the time to learn the software, HIRE an editor.
Don't PAY MORE than $15 for a bottle of wine.

I am having trouble getting rid of the delay between slides I am using revolve and there is a delay between when one fades and the other appears

I am having trouble getting rid of delay between slides. I am Revolving from one to the other and it comes up blank in between slides.

@vincepay
Here is a link to the drivers for the HP Colour LaserJet 3600 windows 7 drivers:
HP Color LaserJet 3600 Series Printers World Wide Printing System - 64 bit driver for windows 7
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

How do I fade to black?

I'm trying to fade to black at the end of my project and I cannot figure it out. Please help!

Then you might find these useful:
iMovie 11 tutorials:
http://help.apple.com/imovie/
http://www.apple.com/ilife/tutorials/#imovie
and also these:
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#interface

Flickering between slides in Captivate 4

Hi,
I'm having some trouble figuring out why my project flickers in between slides in Captivate 4.
Some info on the project:
Each slide's transition on the properties menu is marked as "No transition". Most of the objects on the slide, especially those that appear at the very beginning, are set at "no transition"; others are set as "fade in only" and have at least .5 seconds to fade in.
At first, I had a floating image on each slide as a background image before I realized that I could set a background image. While I was playing around with this, I changed the background color to green just to test it out. It seems that the flicker between slides is whatever color that background color is set to. Black is the least noticeable, it seems...
Then, I set the background image for each slide, but it didn't seem to make a difference. Then, I merged objects, such as the title (same for each slide) and some other non-changing pieces (logo/branding) into the background, and this didn't make much of a difference either.
When I was playing around with the background images, etc., the flickering seemed to stop for a few slide-to-slide transitions, but these "successful" or seamless transitions don't seem to necessarily occur at the same places each time I pre/view them.
Also, I have Adobe Flash Player 9 software on my computer (probably from the Captivate 4 software or from the Adobe CS3 software). I'm aware that there's a new release (10.1), but I've only been able to download plugins for browsers (chrome and firefox, so far), but not the actual software .exe file. Not sure whether its really a FP issue, though, because I've tried opening the project's .swf file in both browsers and the FP 9 and the flickering still occurs in all.
I've seen some evidence of this flickering in other projects before. It may have been a few individual objects, such as a text box here or an image there, and I was somehow always able to fix it, though I never really knew what I did to fix it! The flicker usually just ended up going away! The previous problems were never as grand as they are now (being whole-slide flickers on EACH transition).
Can anyone help me???
It'd be MUCH APPRECIATED!!
Thanks,
Kate

Macnimation,
Flash video can be a bit glitchy in Captivate--especially if the video includes the audio.
In answer to your autodetect concern, is your FLV set to "Pause slide till end of video"?
Then, just thinking out loud, how about a workaround for the audio overlap? Create blank slide (whatever color you want) before the second video--set for 0.1 second or so and "Go to Next Slide". Then navigate to that slide before going to the second video. That might cut the sound off. This might not be the best solution, but it might be the most expedient one. --Leslie

Script causing fade to black

I'm having a weird problem that I can't seem to work around. Here's what I want to do:
I have a bunch of menus that have quiz questions on them (7 quizzes, each with 3-5 questions, 1 menu per question). If the user chooses the correct answer then they go directly to the track that introduces the next question. If they choose the incorrect answer then they jump to a script that adjusts their score and then jumps immediately to the track for the next question (the same one as above).
For the right answers, I get a nice clean fade transition that keeps my background image (which is common to all elements in the quiz). But going to the script first fades it to black before fading back up to the background.
One work-around would be to just make duplicates of the tracks (or of the background alone) to be used for right vs. wrong answers, and use pre-scripts that differ between those tracks to change the GPRM. But I'm up against that incredibly annoying limit of 99 tracks per project (why? why? why would they do that to me?) so I can't make enough extra tracks to solve the problem.
Another work around would be to create two tracks (one for correct and one for incorrect) that each just had 1 second of background and attach a massive pre-script to each that figured out exactly where the user was in the program, made all necessary updates in their scores. But I'm already using each menu twice for different purposes, and am also up against the limit of 99 menus per project (seriously, are they trying to ruin me?) so I can't duplicate those either.
Does anybody know of a way to work around this? Can I freeze the screen during a script or something? Or any brilliant insights into other ways to fix it? I am out of ideas!
Thanks!
Julie

I realized two things that helped me to figure out a work-around. First, I was confused about menus being limited to 99 (I was thinking of slideshows). In fact, menus are limited to 10,000. The other piece of information is that a track can go to a script which then goes to a menu and it does not fade to black (whereas the menu to script to track did fade to black). Who knows why. In any case, this allowed me to make things complicated but functional. It's much messier now, but at least it works.
Still, if anybody knows how to prevent the menu --> script --> track from fading out during the script, I'd love to know!
Thanks
Julie

Fade to black between slides in slideshow, HOW in Lr 5.4???

Similar Messages

Maybe you are looking for