Fail to detect partition via GetOSTargetDriveLetter during ZTIUserState Capture
Hoping to get help from the experts. I have an MDT 2012 Update 1 share that I've been using for a while in which I have support to USMT offline. The media that I build off it have all worked in the past. Recently for some unkown reason
I have started getting failures within the USMT offline portion of the task sequence. If I bypass the USMT portion the deployment goes thru without a glitch. I've tracked down the failure to be within the GetOSTargetDriveLetterEx function in ZTIUtility.
Looks like we're not able to determine the OS partition but I can't figure out what I need to do to resolve this. The below log is the standard ZTIUserState log with added lines so I can check variables. The lines in bold are simply oLogging
entries to print out variable values but as you can see most of the are empty. Any help is greatly appreciated
Property capture is now =
Microsoft Deployment Toolkit version: 6.1.2373.0
The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.
Inside GetOSTargetDriveLetterEx
OriginalPartitionIdentifier= DestinationOSRefresh=
OSDTargetDriveCache= ScriptName=ZTIUserState
TargetPartitionIdentifier=
DestinationOSInstallType=ByVariable DestinationOSDriveLetter=
DestinationOSVariable=
bDiskPartFound=True
DestinationOSInstallType=ByVariable
DestinationOSInstallType=ByVariable DestinationOSDriveLetter=
DestinationDisk=0 DestinationPartition=1
Unable to yield a target Partition (Special Recovery option for Litetouch).
DestinationDisk and Partition did not yield a target Partition.
FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.
One more piece of info. I have a HyperV VM, that I can image and use USMT with without a glitch. I then move the ISO image to a flash that and still get a failure like I listed above. this is frustrating me and cannot come up with a solution.
Any assistance is appreciated, whether it resolves the problem or not. Or if anyone can at least point to where I can find how the variables are populated initialy I'd really appreciate that.
Similar Messages
-
Hi there,
I used the following manual (http://manuals.info.apple.com/MANUALS/1000/MA1583/en_US/boot_camp_install-setup_ 10.7.pdf) in attempt to install windows 7 onto my mac but I get an error at Step 3 - windows installation process
I selected the BOOTCAMP partitioned drive as mentioned, clicked the advance options, and then reformatted that drive. What happens next is the drive changes name from BOOTCAMP to 'untitled'. I then tried to click 'next' button but it won't let me proceed any further and didn't state clearly why it couldn't go through (instead says to check the log file for reason why - but then I have not clue where this log file is located in as well!).
I had a look at that partitioned drive after to find that it is NTFS format (when I went back to OS x) so it appears that I am doing the right thing so that shouldn't be the issue..
Does anyone know what could be wrong? or what I should try to do next?
Could it be a format error because when i click onto the 'untitled' drive, there is nothing in there.Hi Steve1904,
So you have use the backup and Restore to restore your files from Windows XP to Windows 7 directly?
This should be considered not work.
If you would like to transfer files between Windows XP and Windows 7, you need another tool called Windows Easy Transfer.
See the article below if you would like to upgrade from Windows XP to Windows 7:
Upgrading from Windows XP to Windows 7
If possible, follow the steps there, then things should be OK.
Best regards
Michael Shao
TechNet Community Support -
ATI Radeon HD 5870 failing to detect displays randomly during reboots
Hello,
I have a Mac Pro 1,1 A1186 computer, MAC OS X 10.6.6, and I just updated the ole 7300 video card to an ATI Radeon HD 5870 I just purchased from the Apple Store last week.
Problem: Mac OS X 10.6.6 keeps losing the display settings during reboots and fails to detect one of the monitors (the Acer X233H) randomly upon reboots. I tried using two Mini DisplayPort to DVI Adapters, but when that produced undesirable results I just plugged one of the monitors into the DVI diplay port and used just one of the Mini DisplayPort to DVI adapters. Then I tried swapping the monitors around.
I know both monitors and cables that directly connect to the monitors work fine as *they worked on the 7300 adapter*. I'm not using an Apple display, so I'm wondering do I have a bad card or is this common?
I tried reseating the card, completely disconnecting it and reinstalling it. I have both power cables plugged into the card, and both monitors will come up eventually if I keep rebooting my system (if they didn't come up the first time).
Please help... this whole experience is ruining my buzz for purchasing such a kick butt OEM card from Apple. Thank you very much in advanced.
I have 14GB of RAM, 2TB Western Digital (for backup/archival purposes), and an SSD Patriot Torqx 128GB Drive. The Diagnostics state they passed, and everything else works fine except for the display detection.
Here is the setup of the monitors I'm using:
Chipset Model: ATI Radeon HD 5870
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6898
Revision ID: 0x0000
ROM Revision: 113-C0780C-194
EFI Driver Version: 01.00.436
Displays:
Acer X223W:
Resolution: 1680 x 1050 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Rotation: Supported
ACER X233H:
Resolution: 1920 x 1080 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Display Connector:
Status: No Display ConnectedOK, I took your advise and tried the "active powered" adapter last night. No dice. The monitor detection still doesn't work even after purchasing the $100 adapter for only 2 displays. Connecting one of the monitors to the DVI display in the back and connecting the other display to the Mini DisplayPort to Dual-Link DVI Adapter.
_This is not the solution as the problem still occurs._
I also tried reloading Mac OS X Snow Leopard last night wiping out everything on the entire partition to be extreme thinking that the system could be confused. I know I could've just deleted the configuration file, but hey... what the heck.
After applying the updates I was able to see both displays again, +_however again they got confused_+.
The end result is from what I believe that the card is inferior in the way it doesn't allow Mac OS X to detect displays properly and or a driver update needs to be issued from Apple to address this issue.
After trying multiple things it would appear that there is only 1 work around as suggest from above (put the computer to sleep). However, to properly fix things we shouldn't have to utilize work arounds.
Important facts that lead me to this conclusion are:
1. Mac OS X 10.6.6 does detect displays properly with the 7300 with no problem.
2. The monitors and cables work properly with the 7300 card, and other systems. So they are not the issue.
3. After installing the ATI 5870 card that's when we I experienced the issues that didn't go away no matter what cable I used or where I plugged the monitors.
a. Thus a $100 cable or a $30 cable worked the same for this issue.
4. Reinstalling OS X 10.6.6 completely and wiping out everything including the display configuration had no bearing on any of this.
Therefore, it can only be two things by deduction:
1. The firmware of the card needs a revision to help support multiple displays.
and/or
2. The driver for the ATI 5870 needs a revision to correct multiple display support within the Operating System.
However, I can't see paying over $500 for a card and an adapter that doesn't work properly. If there is no hope that Apple or ATI is working on this issue with the ATI 5870 card, I have only one recourse and that is not to support this particular ATI product and take it back. I know I can always just keep putting my computer to sleep, but over $500 for a video card and an adapter that is riddled with bugs is way too much for me.
*I'm taking the card back and reinstalling the 7300 until a proper card can be produced or an update is issued to specifically correct multiple display support.*
*Thank you* everyone for your help, I really appreciate it. *+However, the users of the systems can only do so much without proper support from Apple and/or ATI on this issue.+* -
ORA-39126 during an export of a partition via dbms_datapump
Hi ,
i did export using datapump in command line everything went fine but while exporting via dbms_datapump i got this:
ORA-39126 during an export of a partition via dbms_datapump
ORA-00920
'SELECT FROM DUAL WHERE :1' P20060401
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 6228
the procedure is:
PROCEDURE pr_depura_bitacora
IS
l_job_handle NUMBER;
l_job_state VARCHAR2(30);
l_partition VARCHAR2(30);
v_sql VARCHAR2(2000);
BEGIN
-- Create a user-named Data Pump job to do a "table:partition-level" export
-- Local
select 'P'|| to_char((select min(STP_LOG_DATE) from SAI_AUDITBITACORA),'YYYYMM')||'01'
into l_partition
from user_tab_partitions
where table_name = 'SAI_AUDITBITACORA'
and rownum = 1;
l_partition := rtrim (l_partition,' ');
l_job_handle:= DBMS_DATAPUMP.OPEN
operation=>'EXPORT',
job_mode =>'TABLE',
job_name =>'EXPORT_ORACLENSSA'
-- Schema filter
DBMS_DATAPUMP.METADATA_FILTER
handle => l_job_handle,
name => 'SCHEMA_EXPR',
value => 'IN (''ORACLENSSA'')'
DBMS_OUTPUT.PUT_LINE('Added filter for schema list');
-- Table filter
DBMS_DATAPUMP.METADATA_FILTER
handle => l_job_handle,
name => 'NAME_EXPR',
value => '=''SAI_AUDITBITACORA'''
DBMS_OUTPUT.PUT_LINE('Added filter for table expression');
-- Partition filter
DBMS_DATAPUMP.DATA_FILTER
handle => l_job_handle,
name => 'PARTITION_EXPR',
value => l_partition,
table_name => 'SAI_AUDITBITACORA'
DBMS_OUTPUT.PUT_LINE('Partition filter for schema list');
DBMS_DATAPUMP.ADD_FILE
handle => l_job_handle,
filename => 'EXP'||l_partition||'.DMP',
directory => 'EXP_DATA_PUMP',
filetype => 1
DBMS_DATAPUMP.ADD_FILE
handle => l_job_handle,
filename => 'EXP'||l_partition||'.LOG',
directory => 'EXP_DATA_PUMP',
filetype => 3
DBMS_DATAPUMP.START_JOB
handle => l_job_handle,
skip_current => 0
DBMS_DATAPUMP.WAIT_FOR_JOB
handle => l_job_handle,
job_state => l_job_state
DBMS_OUTPUT.PUT_LINE('Job completed - job state = '||l_job_state);
DBMS_DATAPUMP.DETACH(handle=>l_job_handle);
END;
I've already drop and recreate the directory, granted read, write to public and to user, grant create session, create table, create procedure, exp_full_database to user, restart the database and the listener with the var LD_LIBRARY pointing first to $ORACLE_HOME/lib, and add more space to temporary tablespace.The basic problem is:
Error: ORA 920
Text: invalid relational operator
Cause: A search condition was entered with an invalid or missing relational
operator.
Action: Include a valid relational operator such as =, !=, ^=, <>, >, <, >=, <=
, ALL, ANY, [NOT] BETWEEN, EXISTS, [NOT] IN, IS [NOT] NULL, or [NOT]
LIKE in the condition.
Obviously this refers to the invalid statement 'SELECT FROM DUAL ...'. I also recommend, you should contact Oracle Support, because it happens inside an Oracle provided package.
Werner -
X fails to detect monitor supported resolutions
I have 3 monitors connected to a Radeon HD 7750, using the radeon driver:
Left: NEC MultiSync 90GX², 1280x1024, connected via DisplayPort-to-VGA adaptor
Middle: Samsung SyncMaster BX2335, 1920x1080, connected via DVI
Right: LG Flatron Wide, 1680x1050, connected via HDMI
On every reboot (warm or cold), X fails to detect the NEC monitor's supported resolutions. xrandr will only set it to 1024x768 or less, and it shows "no signal". However if I disconnect the VGA cable, plug it into another monitor (which is broken, but still powers on), and run xrandr again, it lists up to 1280x1024. If I then set the correct modes and layouts, then return the VGA cable to the NEC monitor, it works just fine. Turning the display off via xset doesn't cause any issue either. So on every reboot I have to move the cable to a spare monitor, set up xrandr, then move the cable back.
How can I save this working configuration and force X to apply it on boot even though the monitor for some reason claims to not support it?
I didn't have this issue with Ubuntu, but my setup was a bit different there, so possibly it just didn't manifest.
Here is the Xorg.0.log and journalctl -k from the most recent boot. The get-edid output is also interesting (and contains some control characters which pastebin removed).The NEC on DVI would be only temporarily to get it's real edid-data .
Once you got that in a file, you can use a special kernel parameter at boot to force use of the real edid-data for the NEC monitor.
https://wiki.archlinux.org/index.php/Ke … s_and_EDID describes how it could be done.
Note that configuring this is tricky. -
I have devices loaded but new devices keep getting this error "Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP" - which trying to get configurations. I am using LMS 3.0.1
I tried to TELNET on devices via Putty port 22 no good. Please help?
Name Version License Status Size CiscoWorks Common Services 3.1.1 Licensed Not applicable Campus Manager 5.0.3 Purchased 1500 CiscoView 6.1.7 Licensed Not applicable CiscoWorks Assistant 1.0.1 Licensed Not applicable Device Fault Manager 3.0.3 Purchased 1500 Internetwork Performance Monitor 4.0.1 Purchased 1500 Integration Utility 1.7.1 Licensed Not applicable LMS Portal 1.0.1 Licensed Not applicable Resource Manager Essentials 4.1.1 Purchased 1500Showing 1-1 of 1 records
Go to page:
of 1 pages
Device Name
SysObjectID
Model
Device Status
Inventory Status
Inventory Last Updated Time
Config Status
Config Last Updated Time
1.
R2020012_01
.1.3.6.1.4.1.9.1.576
Cisco 2811 Integrated Services Router
Normal
Success
Jan 13 2011 10:43:49 EST
Failed
Jan 13 2011 10:37:24 EST
Rows per page:
20 50 100 500
Go to page:
of 1 pages -
[SOLVED] mkarchiso: ERROR: failed to detect root filesystem
hi guys!
i am now trying to build my own live archlinux distribution with archiso and with the command "mkarchiso"
at the first step in installing the base when it installs linux and execute "mkinitcpio" it shows me this error:
( 73/111) installing linux [#####################################################################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
==> ERROR: failed to detect root filesystem
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: aic94xx
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
i continue the process with that error and in the "run" step i did this command
# mkarchiso -w work/x86_64/ -r mkinitcpio -p linux run
[root@fuhrer livecd]# mkarchiso -w work/x86_64/ -r mkinitcpio -p linux run
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: run
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work/x86_64/
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Run command: mkinitcpio
==> Starting dry run: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
==> ERROR: failed to detect root filesystem
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Dry run complete, use -g IMAGE to generate a real image
and the big problem shows when i build the iso file and "dd" it to USB disk, when i choose to boot the live archlinux it tell me
ERROR: failed to detect root filesystem
and that you cannot log to tty
any suggestions?
Last edited by fuhrer (2013-07-22 17:05:07)First run it, without any modification to learn how it works. Check if works. Modify as you need. Check if works...
Do not worry about the mkinitcpio error, because such initramfs images should not be used for boot live medium. You can see that profiles uses own mkinitcpio.conf with at least archiso hook
Running mkarchiso directly is not the right way, at least if you do not know how things works.
[root@exequiel tmp]# cp -r /usr/share/archiso/configs/baseline .
[root@exequiel tmp]# cd baseline
[root@exequiel baseline]# ./build.sh
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: init
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Pacman config file: /etc/pacman.conf
[mkarchiso] INFO: Installing packages to 'work/root-image/'...
:: Synchronizing package databases...
core 103.0 KiB 12.6M/s 00:00 [############################################################################] 100%
extra 1439.7 KiB 11.2M/s 00:00 [############################################################################] 100%
community 1990.1 KiB 11.2M/s 00:00 [############################################################################] 100%
multilib 107.3 KiB 11.6M/s 00:00 [############################################################################] 100%
:: There are 51 members in group base:
:: Repository core
1) bash 2) bzip2 3) coreutils 4) cronie 5) cryptsetup 6) device-mapper 7) dhcpcd 8) diffutils 9) e2fsprogs 10) file 11) filesystem 12) findutils 13) gawk 14) gcc-libs 15) gettext 16) glibc
17) grep 18) gzip 19) heirloom-mailx 20) inetutils 21) iproute2 22) iputils 23) jfsutils 24) less 25) licenses 26) linux 27) logrotate 28) lvm2 29) man-db 30) man-pages 31) mdadm 32) nano
33) netctl 34) pacman 35) pciutils 36) pcmciautils 37) perl 38) procps-ng 39) psmisc 40) reiserfsprogs 41) sed 42) shadow 43) sysfsutils 44) systemd-sysvcompat 45) tar 46) texinfo 47) usbutils
48) util-linux 49) vi 50) which 51) xfsprogs
Enter a selection (default=all):
resolving dependencies...
looking for inter-conflicts...
Packages (111):
Name New Version Net Change
core/acl 2.2.52-1 0.39 MiB
core/archlinux-keyring 20130525-2 0.49 MiB
core/attr 2.4.47-1 0.19 MiB
core/ca-certificates 20130610-1 0.25 MiB
core/cracklib 2.8.22-3 1.20 MiB
core/curl 7.31.0-1 1.73 MiB
core/db 5.3.21-1 15.30 MiB
core/dbus 1.6.12-1 1.63 MiB
core/dirmngr 1.1.1-1 0.49 MiB
core/expat 2.1.0-2 0.61 MiB
core/gdbm 1.10-1 0.37 MiB
core/glib2 2.36.3-2 11.66 MiB
core/gmp 5.1.2-1 2.07 MiB
core/gnupg 2.0.20-2 7.14 MiB
core/gpgme 1.4.2-1 0.68 MiB
core/groff 1.22.2-3 8.94 MiB
core/hwids 20130607-1 1.28 MiB
core/iana-etc 2.30-3 3.44 MiB
core/iptables 1.4.19.1-1 1.38 MiB
core/kbd 1.15.5-4 2.83 MiB
core/keyutils 1.5.5-5 0.18 MiB
core/kmod 14-1 0.45 MiB
core/krb5 1.11.3-1 3.86 MiB
core/libarchive 3.1.2-1 3.19 MiB
core/libassuan 2.1.1-1 0.17 MiB
core/libcap 2.22-5 0.13 MiB
core/libffi 3.0.13-3 0.10 MiB
core/libgcrypt 1.5.2-1 0.68 MiB
core/libgpg-error 1.12-1 0.33 MiB
core/libgssglue 0.4-1 0.19 MiB
core/libksba 1.3.0-1 0.30 MiB
core/libldap 2.4.35-4 2.15 MiB
core/libpipeline 1.2.4-1 0.08 MiB
core/libsasl 2.1.26-4 0.54 MiB
core/libssh2 1.4.3-1 1.19 MiB
core/libtirpc 0.2.3-1 0.68 MiB
core/libusbx 1.0.15-1 0.15 MiB
core/linux-api-headers 3.8.4-1 4.58 MiB
core/linux-firmware 20130610-1 51.25 MiB
core/lzo2 2.06-1 0.61 MiB
core/mkinitcpio 0.14.0-1 0.16 MiB
core/mkinitcpio-busybox 1.20.2-1 0.34 MiB
core/mpfr 3.1.2-1 1.50 MiB
core/ncurses 5.9-5 9.75 MiB
core/openresolv 3.5.5-1 0.04 MiB
core/openssl 1.0.1.e-3 11.38 MiB
core/pacman-mirrorlist 20130626-1 0.02 MiB
core/pam 1.1.6-4 3.41 MiB
core/pambase 20130113-1 0.04 MiB
core/pcre 8.33-1 4.83 MiB
core/pinentry 0.8.3-1 0.33 MiB
core/popt 1.16-6 0.43 MiB
core/pth 2.0.7-4 0.21 MiB
core/readline 6.2.004-1 1.20 MiB
core/run-parts 4.3.4-1 0.11 MiB
core/systemd 204-3 14.59 MiB
core/sysvinit-tools 2.88-11 0.07 MiB
core/tzdata 2013d-1 1.84 MiB
core/xz 5.0.5-1 0.90 MiB
core/zlib 1.2.8-1 0.30 MiB
core/bash 4.2.045-4 3.51 MiB
core/bzip2 1.0.6-4 0.25 MiB
core/coreutils 8.21-2 13.27 MiB
core/cronie 1.4.9-5 0.15 MiB
core/cryptsetup 1.6.1-2 0.71 MiB
core/device-mapper 2.02.98-4 0.52 MiB
core/dhcpcd 5.6.8-3 0.16 MiB
core/diffutils 3.3-1 0.43 MiB
core/e2fsprogs 1.42.8-1 3.16 MiB
core/file 5.14-1 2.71 MiB
core/filesystem 2013.05-2 0.01 MiB
core/findutils 4.4.2-5 1.70 MiB
core/gawk 4.1.0-1 2.11 MiB
core/gcc-libs 4.8.1-1 3.41 MiB
core/gettext 0.18.3-1 11.10 MiB
core/glibc 2.17-6 35.24 MiB
core/grep 2.14-2 1.33 MiB
core/gzip 1.6-1 0.18 MiB
core/heirloom-mailx 12.5-3 0.46 MiB
core/inetutils 1.9.1-6 0.97 MiB
core/iproute2 3.9.0-2 1.37 MiB
core/iputils 20121221-2 0.21 MiB
core/jfsutils 1.1.15-4 0.98 MiB
core/less 458-1 0.22 MiB
core/licenses 20130203-1 0.53 MiB
core/linux 3.9.9-1 63.98 MiB
core/logrotate 3.8.5-1 0.07 MiB
core/lvm2 2.02.98-4 3.10 MiB
core/man-db 2.6.5-1 1.26 MiB
core/man-pages 3.52-1 4.63 MiB
core/mdadm 3.2.6-4 1.18 MiB
core/nano 2.2.6-2 1.49 MiB
core/netctl 1.1-1 0.16 MiB
core/pacman 4.1.2-1 4.04 MiB
core/pciutils 3.2.0-3 0.34 MiB
core/pcmciautils 018-7 0.05 MiB
core/perl 5.18.0-1 47.64 MiB
core/procps-ng 3.3.8-2 0.59 MiB
core/psmisc 22.20-1 0.73 MiB
core/reiserfsprogs 3.6.23-1 0.95 MiB
core/sed 4.2.2-3 0.76 MiB
core/shadow 4.1.5.1-6 3.88 MiB
core/sysfsutils 2.1.0-8 0.17 MiB
core/systemd-sysvcompat 204-3 0.03 MiB
core/tar 1.26-4 2.33 MiB
core/texinfo 5.1-1 8.62 MiB
core/usbutils 007-1 0.17 MiB
core/util-linux 2.23.1-2 8.92 MiB
core/vi 1:050325-3 0.33 MiB
core/which 2.20-6 0.06 MiB
core/xfsprogs 3.1.11-1 3.29 MiB
Total Installed Size: 427.79 MiB
:: Proceed with installation? [Y/n]
(111/111) checking keys in keyring [############################################################################] 100%
(111/111) checking package integrity [############################################################################] 100%
(111/111) loading package files [############################################################################] 100%
(111/111) checking for file conflicts [############################################################################] 100%
(111/111) checking available disk space [############################################################################] 100%
( 1/111) installing linux-api-headers [############################################################################] 100%
( 2/111) installing tzdata [############################################################################] 100%
( 3/111) installing iana-etc [############################################################################] 100%
( 4/111) installing filesystem [############################################################################] 100%
warning: directory permissions differ on /tmp/baseline/work/root-image/run/
filesystem: 1777 package: 755
( 5/111) installing glibc [############################################################################] 100%
( 6/111) installing ncurses [############################################################################] 100%
( 7/111) installing readline [############################################################################] 100%
( 8/111) installing bash [############################################################################] 100%
( 9/111) installing bzip2 [############################################################################] 100%
( 10/111) installing gcc-libs [############################################################################] 100%
( 11/111) installing db [############################################################################] 100%
( 12/111) installing zlib [############################################################################] 100%
( 13/111) installing cracklib [############################################################################] 100%
( 14/111) installing libgssglue [############################################################################] 100%
( 15/111) installing libtirpc [############################################################################] 100%
( 16/111) installing pambase [############################################################################] 100%
( 17/111) installing pam [############################################################################] 100%
( 18/111) installing attr [############################################################################] 100%
( 19/111) installing acl [############################################################################] 100%
( 20/111) installing gmp [############################################################################] 100%
( 21/111) installing libcap [############################################################################] 100%
( 22/111) installing coreutils [############################################################################] 100%
( 23/111) installing run-parts [############################################################################] 100%
( 24/111) installing cronie [############################################################################] 100%
Optional dependencies for cronie
pm-utils: defer anacron on battery power
smtp-server: send job output via email
smtp-forwarder: forward job output to email server
( 25/111) installing expat [############################################################################] 100%
( 26/111) installing dbus [############################################################################] 100%
Optional dependencies for dbus
libx11: dbus-launch support
( 27/111) installing pcre [############################################################################] 100%
( 28/111) installing libffi [############################################################################] 100%
( 29/111) installing glib2 [############################################################################] 100%
Optional dependencies for glib2
python2: for gdbus-codegen and gtester-report
elfutils: gresource inspection tool
( 30/111) installing kbd [############################################################################] 100%
( 31/111) installing kmod [############################################################################] 100%
( 32/111) installing hwids [############################################################################] 100%
( 33/111) installing libgpg-error [############################################################################] 100%
( 34/111) installing libgcrypt [############################################################################] 100%
( 35/111) installing shadow [############################################################################] 100%
( 36/111) installing util-linux [############################################################################] 100%
( 37/111) installing xz [############################################################################] 100%
( 38/111) installing systemd [############################################################################] 100%
Initializing machine ID from random generator.
ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Optional dependencies for systemd
cryptsetup: required for encrypted block devices [pending]
libmicrohttpd: systemd-journal-gatewayd
quota-tools: kernel-level quota management
python: systemd library bindings
systemd-sysvcompat: symlink package to provide sysvinit binaries [pending]
( 39/111) installing device-mapper [############################################################################] 100%
( 40/111) installing popt [############################################################################] 100%
( 41/111) installing cryptsetup [############################################################################] 100%
( 42/111) installing dhcpcd [############################################################################] 100%
( 43/111) installing diffutils [############################################################################] 100%
( 44/111) installing e2fsprogs [############################################################################] 100%
( 45/111) installing file [############################################################################] 100%
( 46/111) installing findutils [############################################################################] 100%
( 47/111) installing mpfr [############################################################################] 100%
( 48/111) installing gawk [############################################################################] 100%
( 49/111) installing gettext [############################################################################] 100%
Optional dependencies for gettext
cvs: for autopoint tool
( 50/111) installing grep [############################################################################] 100%
( 51/111) installing less [############################################################################] 100%
( 52/111) installing gzip [############################################################################] 100%
( 53/111) installing gdbm [############################################################################] 100%
( 54/111) installing perl [############################################################################] 100%
( 55/111) installing openssl [############################################################################] 100%
Optional dependencies for openssl
ca-certificates [pending]
( 56/111) installing libsasl [############################################################################] 100%
( 57/111) installing libldap [############################################################################] 100%
( 58/111) installing keyutils [############################################################################] 100%
( 59/111) installing krb5 [############################################################################] 100%
( 60/111) installing heirloom-mailx [############################################################################] 100%
Optional dependencies for heirloom-mailx
smtp-forwarder: for sending mail
( 61/111) installing inetutils [############################################################################] 100%
( 62/111) installing iptables [############################################################################] 100%
( 63/111) installing iproute2 [############################################################################] 100%
Optional dependencies for iproute2
linux-atm: ATM support
( 64/111) installing sysfsutils [############################################################################] 100%
( 65/111) installing iputils [############################################################################] 100%
Optional dependencies for iputils
xinetd: for tftpd
( 66/111) installing jfsutils [############################################################################] 100%
( 67/111) installing licenses [############################################################################] 100%
( 68/111) installing linux-firmware [############################################################################] 100%
( 69/111) installing mkinitcpio-busybox [############################################################################] 100%
( 70/111) installing lzo2 [############################################################################] 100%
( 71/111) installing libarchive [############################################################################] 100%
( 72/111) installing mkinitcpio [############################################################################] 100%
Optional dependencies for mkinitcpio
xz: Use lzma or xz compression for the initramfs image [pending]
bzip2: Use bzip2 compression for the initramfs image [pending]
lzop: Use lzo compression for the initramfs image
mkinitcpio-nfs-utils: Support for root filesystem on NFS
( 73/111) installing linux [############################################################################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
==> ERROR: failed to detect root filesystem
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: aic94xx
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
Optional dependencies for linux
crda: to set the correct wireless channels of your country
( 74/111) installing logrotate [############################################################################] 100%
Optional dependencies for logrotate
cron: scheduled log rotation
( 75/111) installing lvm2 [############################################################################] 100%
( 76/111) installing groff [############################################################################] 100%
Optional dependencies for groff
netpbm: for use together with man -H command interaction in browsers
psutils: for use together with man -H command interaction in browsers
libxaw: for gxditview
( 77/111) installing libpipeline [############################################################################] 100%
( 78/111) installing man-db [############################################################################] 100%
it's recommended to create an initial
database running as root:
"/usr/bin/mandb --quiet"
Optional dependencies for man-db
gzip [pending]
( 79/111) installing man-pages [############################################################################] 100%
( 80/111) installing mdadm [############################################################################] 100%
( 81/111) installing nano [############################################################################] 100%
( 82/111) installing openresolv [############################################################################] 100%
( 83/111) installing netctl [############################################################################] 100%
Optional dependencies for netctl
dialog: for the menu based wifi assistant
dhclient: for DHCP support (or dhcpcd)
dhcpcd: for DHCP support (or dhclient) [pending]
wpa_supplicant: for wireless networking support
ifplugd: for automatic wired connections through netctl-ifplugd
wpa_actiond: for automatic wireless connections through netctl-auto
ifenslave: for bond connections
bridge-utils: for bridge connections
ppp: for pppoe connections
( 84/111) installing sed [############################################################################] 100%
( 85/111) installing ca-certificates [############################################################################] 100%
( 86/111) installing libssh2 [############################################################################] 100%
( 87/111) installing curl [############################################################################] 100%
( 88/111) installing pth [############################################################################] 100%
( 89/111) installing libksba [############################################################################] 100%
( 90/111) installing libassuan [############################################################################] 100%
( 91/111) installing pinentry [############################################################################] 100%
Optional dependencies for pinentry
gtk2: for gtk2 backend
qt4: for qt4 backend
( 92/111) installing dirmngr [############################################################################] 100%
( 93/111) installing gnupg [############################################################################] 100%
Optional dependencies for gnupg
curl: gpg2keys_curl [pending]
libldap: gpg2keys_ldap [pending]
libusb-compat: scdaemon
( 94/111) installing gpgme [############################################################################] 100%
( 95/111) installing pacman-mirrorlist [############################################################################] 100%
( 96/111) installing archlinux-keyring [############################################################################] 100%
( 97/111) installing pacman [############################################################################] 100%
>>> Run `pacman-key --init; pacman-key --populate archlinux`
>>> to import the data required by pacman for package verification.
>>> See: https://www.archlinux.org/news/having-pacman-verify-packages
Optional dependencies for pacman
fakeroot: for makepkg usage as normal user
( 98/111) installing pciutils [############################################################################] 100%
( 99/111) installing pcmciautils [############################################################################] 100%
(100/111) installing procps-ng [############################################################################] 100%
(101/111) installing psmisc [############################################################################] 100%
(102/111) installing reiserfsprogs [############################################################################] 100%
(103/111) installing sysvinit-tools [############################################################################] 100%
(104/111) installing systemd-sysvcompat [############################################################################] 100%
(105/111) installing tar [############################################################################] 100%
(106/111) installing texinfo [############################################################################] 100%
(107/111) installing libusbx [############################################################################] 100%
(108/111) installing usbutils [############################################################################] 100%
Optional dependencies for usbutils
python2: for lsusb.py usage
coreutils: for lsusb.py usage [pending]
(109/111) installing vi [############################################################################] 100%
Optional dependencies for vi
heirloom-mailx: used by the preserve command for notification [pending]
(110/111) installing which [############################################################################] 100%
(111/111) installing xfsprogs [############################################################################] 100%
[mkarchiso] INFO: Packages installed successfully!
[mkarchiso] INFO: Installing packages to 'work/root-image/'...
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
resolving dependencies...
looking for inter-conflicts...
Packages (1):
Name New Version Net Change
core/syslinux 4.06-2 3.35 MiB
Total Installed Size: 3.35 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [############################################################################] 100%
(1/1) checking package integrity [############################################################################] 100%
(1/1) loading package files [############################################################################] 100%
(1/1) checking for file conflicts [############################################################################] 100%
(1/1) checking available disk space [############################################################################] 100%
(1/1) installing syslinux [############################################################################] 100%
==> If you want to use syslinux as your bootloader
==> edit /boot/syslinux/syslinux.cfg and run
==> # /usr/bin/syslinux-install_update -i -a -m
==> to install it.
Optional dependencies for syslinux
perl-passwd-md5: For md5pass
perl-digest-sha1: For sha1pass
mtools: For mkdiskimage and syslinux support
gptfdisk: For GPT support
util-linux: For isohybrid [installed]
[mkarchiso] INFO: Packages installed successfully!
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: run
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Run command: mkinitcpio -c /etc/mkinitcpio-archiso.conf -k /boot/vmlinuz-linux -g /boot/archiso.img
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [archiso]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: aic94xx
-> Running build hook: [filesystems]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/archiso.img
==> Image generation successful
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: prepare
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Cleaning up what we can on root-image...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Target 'work/iso/arch/x86_64/root-image.fs.sfs' does not exist, making it from 'work/root-image'
[mkarchiso] INFO: Creating ext4 image of 1025 MiB...
mke2fs 1.42.8 (20-Jun-2013)
Discarding device blocks: done
warning: 256 blocks unused.
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
65664 inodes, 262144 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=268435456
8 block groups
32768 blocks per group, 32768 fragments per group
8208 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Allocating group tables: done
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Mounting 'work/root-image.fs' on 'work/mnt/root-image'
[mkarchiso] INFO: Total: 1008 MiB (100%) | Used: 2 MiB (1%) | Avail: 1007 MiB (99%)
[mkarchiso] INFO: Copying 'work/root-image/' to 'work/mnt/root-image/'...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Total: 1008 MiB (100%) | Used: 552 MiB (55%) | Avail: 457 MiB (45%)
[mkarchiso] INFO: Unmounting 'work/mnt/root-image'
[mkarchiso] INFO: Creating SquashFS image for 'work/root-image.fs', This may take some time...
Parallel mksquashfs: Using 2 processors
Creating 4.0 filesystem on work/root-image.fs.sfs, block size 131072.
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, compressed xattrs
duplicates are removed
Filesystem size 193188.71 Kbytes (188.66 Mbytes)
18.41% of uncompressed filesystem size (1049632.29 Kbytes)
Inode table size 10918 bytes (10.66 Kbytes)
33.19% of uncompressed inode table size (32898 bytes)
Directory table size 31 bytes (0.03 Kbytes)
88.57% of uncompressed directory table size (35 bytes)
Number of duplicate files found 0
Number of inodes 2
Number of files 1
Number of fragments 0
Number of symbolic links 0
Number of device nodes 0
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 1
Number of ids (unique uids + gids) 1
Number of uids 1
root (0)
Number of gids 1
root (0)
[mkarchiso] INFO: Image creation done in 01:46 minutes
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: checksum
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Target 'work/iso/arch/checksum.i686.md5' does not exist, making it from 'work/iso/arch'
[mkarchiso] INFO: Creating checksum file for self-test (i686)...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Target 'work/iso/arch/checksum.x86_64.md5' does not exist, making it from 'work/iso/arch'
[mkarchiso] INFO: Creating checksum file for self-test (x86_64)...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: iso
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Image name: archlinux-2013.07.21-x86_64.iso
[mkarchiso] INFO: Disk label: ARCH_201307
[mkarchiso] INFO: Disk publisher: Arch Linux <http://www.archlinux.org>
[mkarchiso] INFO: Disk application: Arch Linux Live/Rescue CD
[mkarchiso] INFO: Target 'out/archlinux-2013.07.21-x86_64.iso' does not exist, making it from 'work/iso'
[mkarchiso] INFO: Creating ISO image...
xorriso 1.3.0 : RockRidge filesystem manipulator, libburnia project.
Drive current: -outdev 'stdio:out/archlinux-2013.07.21-x86_64.iso'
Media current: stdio file, overwriteable
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data, 4155m free
Added to ISO image: directory '/'='/tmp/baseline/work/iso'
xorriso : UPDATE : 16 files added in 1 seconds
xorriso : UPDATE : 16 files added in 1 seconds
xorriso : NOTE : Copying to System Area: 432 bytes from file '/tmp/baseline/work/iso/isolinux/isohdpfx.bin'
libisofs: NOTE : Aligned image size to cylinder size by 177 blocks
xorriso : UPDATE : 16.90% done
xorriso : UPDATE : 82.85% done
ISO image produced: 105472 sectors
Written to medium : 105472 sectors at LBA 0
Writing to 'stdio:out/archlinux-2013.07.21-x86_64.iso' completed successfully.
[mkarchiso] INFO: Done! | 206M out/archlinux-2013.07.21-x86_64.iso
Booting:
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
:: running hook [archiso]
:: Mounting '/dev/disk/by-label/ARCH_201307' to '/run/archiso/bootmnt'
:: Device '/dev/disk/by-label/ARCH_201307' mounted successfully.
:: Mounting /run/archiso/cowspace (tmpfs) filesystem, size=75%...
:: Mounting '/dev/loop0' to '/run/archiso/sfs/root-image'
:: Device '/dev/loop0' mounted successfully.
:: Creating '/run/archiso/cowspace/persistent_ARCH_201307/x86_64/root-image.cow' as non-persistent.
:: Mounting '/dev/mapper/arch_root-image' to '/new_root/'
:: Device '/dev/mapper/arch_root-image' mounted successfully.
:: running cleanup hook [udev]
Welcome to Arch Linux!
Expecting device dev-ttyS0.device...
[ OK ] Reached target Remote File Systems.
[ OK ] Listening on LVM2 metadata daemon socket.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Reached target Paths.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ OK ] Listening on Journal Socket.
Mounting POSIX Message Queue File System...
Starting Setup Virtual Console...
Starting Create static device nodes in /dev...
Mounting Huge Pages File System...
Starting Apply Kernel Variables...
Mounting Debug File System...
Mounting Configuration File System...
Starting udev Coldplug all Devices...
Starting Journal Service...
[ OK ] Started Journal Service.
[ OK ] Reached target Swap.
Mounting Temporary Directory...
Starting Remount Root and Kernel File Systems...
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Setup Virtual Console.
[ OK ] Started Apply Kernel Variables.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted Debug File System.
[ OK ] Started Create static device nodes in /dev.
[ OK ] Mounted Configuration File System.
[ OK ] Mounted Temporary Directory.
Starting udev Kernel Device Manager...
Starting Load Random Seed...
[ OK ] Started Load Random Seed.
[ OK ] Started udev Kernel Device Manager.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
Starting Recreate Volatile Files and Directories...
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Recreate Volatile Files and Directories.
Starting Update UTMP about System Reboot/Shutdown...
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Started Update UTMP about System Reboot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Permit User Sessions...
Starting D-Bus System Message Bus...
[ OK ] Started D-Bus System Message Bus.
Starting Login Service...
[ OK ] Started Permit User Sessions.
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
[ OK ] Started Login Service.
[ OK ] Found device /dev/ttyS0.
Starting Serial Getty on ttyS0...
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Arch Linux 3.9.9-1-ARCH (ttyS0)
localhost login: -
Failed to post data to database during "Update": SQL Statement
Hi,
I'm getting this error while trying to update a VO via BCBrowser or UI.
Failed to post data to database during "Update": SQL Statement
This is a simple & straight forward default VO created on Entity Object (Database Table)
On the same table & with same DB credentials, I could successfully update the record.
Any Guess, on what went Wrong??
Thanks in Advance for any help.
p.s Jdev 11.1.1.6
Log:
oracle.jbo.DMLException: JBO-26041: Failed to post data to database during "Update": SQL Statement "BEGIN UPDATE CAR CarEO SET SEL_ITEM=:1 WHERE TXN_NO=:2 AND LOGID=:3 AND SEQNO=:4 RETURNING DELIVERY_MODE, CERTIFICATION_REQ, SOFT_COPY_IND, SELITEM INTO :5, :6, :7, :8; END;".
at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:583)
at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:8575)
at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6816)
at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3290)
at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3093)
at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2097)
at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2378)
at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1615)
at oracle.adf.model.binding.DCDataControl.callCommitTransaction(DCDataControl.java:1417)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1437)
at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2150)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:740)
at oracle.jbo.uicli.jui.JUActionBinding.actionPerformed(JUActionBinding.java:193)
at oracle.jbo.uicli.controls.JUNavigationBar.doAction(JUNavigationBar.java:412)
at oracle.jbo.jbotester.NavigationBar.doAction(NavigationBar.java:111)
at oracle.jbo.uicli.controls.JUNavigationBar$NavButton.actionPerformed(JUNavigationBar.java:118)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.Component.processMouseEvent(Component.java:6289)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6054)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4652)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:617)
at java.awt.EventQueue$2.run(EventQueue.java:615)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.sql.SQLException: Invalid column type
at oracle.jdbc.driver.OracleCallableStatement.registerOutParameterInternal(OracleCallableStatement.java:150)
at oracle.jdbc.driver.OracleCallableStatement.registerOutParameter(OracleCallableStatement.java:399)
at oracle.jdbc.driver.OracleCallableStatement.registerOutParameter(OracleCallableStatement.java:581)
at oracle.jdbc.driver.OracleCallableStatementWrapper.registerOutParameter(OracleCallableStatementWrapper.java:1765)
at oracle.jbo.server.OracleSQLBuilderImpl.bindUpdateStatement(OracleSQLBuilderImpl.java:2243)
at oracle.jbo.server.EntityImpl.bindDMLStatement(EntityImpl.java:10524)
at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:412)
... 52 moreThe issue is resolved now.
new Columns added to the Database table, after creating Entity Object. These latest changes were not picked up in Entity Object.
I found this difference after comparison of entity object with DB Table.
And when I added those new columns to EO & VO, I'm not getting this error anymore.
Thanks to all who tried to help -
Client failing to recieve update via WSUS
I have created a virtual lab environment and I am testing WSUS.
I have deployed and configured my WSUS server as well as creating a GPO to point clients to my server.
When manually checking for updates through windows update I receive error code 80244019.
I have reviewed the update logs and feel there is an issue contacting my WSUS server. Any suggestions would be greatly appreciated
2014-04-02 00:13:00:860 848 798 AU Triggering AU detection through DetectNow API
2014-04-02 00:13:00:860 848 798 AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Scheduled} added to AU services list
2014-04-02 00:13:00:860 848 798 AU Triggering Online detection (interactive)
2014-04-02 00:13:00:989 848 51c AU #############
2014-04-02 00:13:00:989 848 51c AU ## START ## AU: Search for updates
2014-04-02 00:13:00:989 848 51c AU #########
2014-04-02 00:13:01:001 848 51c AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Scheduled} added to AU services list
2014-04-02 00:13:01:001 848 51c IdleTmr WU operation (CSearchCall::Init ID 45) started; operation # 322; does use network; is not at background priority
2014-04-02 00:13:01:001 848 51c IdleTmr Incremented PDC RefCount for Network to 1
2014-04-02 00:13:01:001 848 51c IdleTmr Incremented idle timer priority operation counter to 2
2014-04-02 00:13:01:001 848 51c Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 45]
2014-04-02 00:13:01:001 848 51c AU <<## SUBMITTED ## AU: Search for updates [CallId = {4AA753DD-56B8-4DD2-BDC2-7FC77A75BEE4} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-04-02 00:13:01:001 848 81c Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 45]
2014-04-02 00:13:01:001 848 81c Agent *************
2014-04-02 00:13:01:001 848 81c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 45]
2014-04-02 00:13:01:001 848 81c Agent *********
2014-04-02 00:13:01:001 848 81c Agent * Online = Yes; Ignore download priority = No
2014-04-02 00:13:01:001 848 81c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-04-02 00:13:01:001 848 81c Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-04-02 00:13:01:001 848 81c Agent * Search Scope = {Machine & All Users}
2014-04-02 00:13:01:001 848 81c Agent * Caller SID for Applicability: S-1-5-21-2929840714-3911456617-1138986597-1106
2014-04-02 00:13:01:001 848 81c EP Got WSUS Client/Server URL: "http://APP1.CORP.CONTOSO.COM/ClientWebService/client.asmx"
2014-04-02 00:13:01:001 848 81c Setup Checking for agent SelfUpdate
2014-04-02 00:13:01:048 848 81c Setup Client version: Core: 7.9.9600.16422 Aux: 7.9.9600.16384
2014-04-02 00:13:01:048 848 81c EP Got WSUS SelfUpdate URL: "http://APP1.CORP.CONTOSO.COM/selfupdate"
2014-04-02 00:13:01:064 848 81c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80190194
2014-04-02 00:13:01:064 848 81c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80190194
2014-04-02 00:13:01:064 848 81c Misc WARNING: DownloadFileInternal failed for http://APP1.CORP.CONTOSO.COM/selfupdate/wuident.cab: error 0x80190194
2014-04-02 00:13:01:064 848 81c Setup WARNING: SelfUpdate check failed to download package information, error = 0x80244019
2014-04-02 00:13:01:064 848 81c Setup FATAL: SelfUpdate check failed, err = 0x80244019
2014-04-02 00:13:01:079 848 81c Agent * WARNING: Skipping scan, self-update check returned 0x80244019
2014-04-02 00:13:01:079 848 81c Agent * WARNING: Exit code = 0x80244019
2014-04-02 00:13:01:079 848 81c Agent *********
2014-04-02 00:13:01:079 848 81c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 45]
2014-04-02 00:13:01:079 848 81c Agent *************
2014-04-02 00:13:01:079 848 81c Agent WARNING: WU client failed Searching for update with error 0x80244019
2014-04-02 00:13:01:079 848 81c IdleTmr WU operation (CSearchCall::Init ID 45, operation # 322) stopped; does use network; is not at background priority
2014-04-02 00:13:01:079 848 81c IdleTmr Decremented PDC RefCount for Network to 0
2014-04-02 00:13:01:079 848 81c IdleTmr Decremented idle timer priority operation counter to 1
2014-04-02 00:13:01:079 848 8e0 AU >>## RESUMED ## AU: Search for updates [CallId = {4AA753DD-56B8-4DD2-BDC2-7FC77A75BEE4} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-04-02 00:13:01:079 848 8e0 AU # WARNING: Search callback failed, result = 0x80244019
2014-04-02 00:13:01:079 848 8e0 AU #########
2014-04-02 00:13:01:079 848 8e0 AU ## END ## AU: Search for updates [CallId = {4AA753DD-56B8-4DD2-BDC2-7FC77A75BEE4} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-04-02 00:13:01:079 848 8e0 AU #############
2014-04-02 00:13:01:079 848 8e0 AU All AU searches complete.
2014-04-02 00:13:01:079 848 8e0 AU # WARNING: Failed to find updates with error code 80244019
2014-04-02 00:13:01:079 848 8e0 AU Need to show Unable to Detect notification
2014-04-02 00:13:01:079 848 8e0 AU AU setting next detection timeout to 2014-04-02 04:13:01
2014-04-02 00:13:01:095 848 8e0 AU # Publishing WNF Per user update count event Count: 0 SID {S-1-5-21-2929840714-3911456617-1138986597-1106} Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}
2014-04-02 00:13:01:095 848 8e0 AU # Publishing WNF Per user update count event Count: 0 SID {S-1-5-21-2929840714-3911456617-1138986597-1106} Service {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2014-04-02 00:13:01:095 848 8e0 AU # Publishing WNF Per user update count event Count: 0 SID {S-1-5-21-2929840714-3911456617-1138986597-1106} Service {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-04-02 00:13:01:095 848 8e0 AU # Publishing WNF Per user update count event Count: 7 SID {S-1-5-21-1674019052-998012437-141338546-1001} Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}
2014-04-02 00:13:01:095 848 8e0 AU # Publishing WNF Per user update count event Count: 0 SID {S-1-5-21-1674019052-998012437-141338546-1001} Service {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2014-04-02 00:13:01:095 848 8e0 AU # Publishing WNF Per user update count event Count: 0 SID {S-1-5-21-1674019052-998012437-141338546-1001} Service {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-04-02 00:13:02:939 848 79c AU Triggering AU detection through DetectNow API
2014-04-02 00:13:02:939 848 79c AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Scheduled} added to AU services list
2014-04-02 00:13:02:939 848 79c AU Triggering Online detection (interactive)
2014-04-02 00:13:03:079 848 51c AU #############
2014-04-02 00:13:03:079 848 51c AU ## START ## AU: Search for updates
2014-04-02 00:13:03:079 848 51c AU #########
2014-04-02 00:13:03:079 848 51c AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Scheduled} added to AU services list
2014-04-02 00:13:03:079 848 51c IdleTmr WU operation (CSearchCall::Init ID 46) started; operation # 331; does use network; is not at background priority
2014-04-02 00:13:03:079 848 51c IdleTmr Incremented PDC RefCount for Network to 1
2014-04-02 00:13:03:079 848 51c IdleTmr Incremented idle timer priority operation counter to 2
2014-04-02 00:13:03:079 848 51c Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 46]
2014-04-02 00:13:03:079 848 51c AU <<## SUBMITTED ## AU: Search for updates [CallId = {BF690BA2-3D86-45C0-9A18-D8BC8BC47DAC} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-04-02 00:13:03:079 848 81c Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 46]
2014-04-02 00:13:03:095 848 81c Agent *************
2014-04-02 00:13:03:095 848 81c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 46]
2014-04-02 00:13:03:095 848 81c Agent *********
2014-04-02 00:13:03:095 848 81c Agent * Online = Yes; Ignore download priority = No
2014-04-02 00:13:03:095 848 81c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-04-02 00:13:03:095 848 81c Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-04-02 00:13:03:095 848 81c Agent * Search Scope = {Machine & All Users}
2014-04-02 00:13:03:095 848 81c Agent * Caller SID for Applicability: S-1-5-21-2929840714-3911456617-1138986597-1106
2014-04-02 00:13:03:095 848 81c EP Got WSUS Client/Server URL: "http://APP1.CORP.CONTOSO.COM/ClientWebService/client.asmx"
2014-04-02 00:13:03:095 848 81c Setup Checking for agent SelfUpdate
2014-04-02 00:13:03:095 848 81c Setup Client version: Core: 7.9.9600.16422 Aux: 7.9.9600.16384
2014-04-02 00:13:03:095 848 81c EP Got WSUS SelfUpdate URL: "http://APP1.CORP.CONTOSO.COM/selfupdate"
2014-04-02 00:13:03:110 848 81c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80190194
2014-04-02 00:13:03:110 848 81c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80190194
2014-04-02 00:13:03:110 848 81c Misc WARNING: DownloadFileInternal failed for http://APP1.CORP.CONTOSO.COM/selfupdate/wuident.cab: error 0x80190194
2014-04-02 00:13:03:110 848 81c Setup WARNING: SelfUpdate check failed to download package information, error = 0x80244019
2014-04-02 00:13:03:110 848 81c Setup FATAL: SelfUpdate check failed, err = 0x80244019
2014-04-02 00:13:03:110 848 81c Agent * WARNING: Skipping scan, self-update check returned 0x80244019
2014-04-02 00:13:03:110 848 81c Agent * WARNING: Exit code = 0x80244019
2014-04-02 00:13:03:110 848 81c Agent *********
2014-04-02 00:13:03:110 848 81c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 46]
2014-04-02 00:13:03:110 848 81c Agent *************
2014-04-02 00:13:03:110 848 81c Agent WARNING: WU client failed Searching for update with error 0x80244019
2014-04-02 00:13:03:110 848 81c IdleTmr WU operation (CSearchCall::Init ID 46, operation # 331) stopped; does use network; is not at background priority
2014-04-02 00:13:03:110 848 81c IdleTmr Decremented PDC RefCount for Network to 0
2014-04-02 00:13:03:110 848 81c IdleTmr Decremented idle timer priority operation counter to 1
2014-04-02 00:13:03:110 848 8e0 AU >>## RESUMED ## AU: Search for updates [CallId = {BF690BA2-3D86-45C0-9A18-D8BC8BC47DAC} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-04-02 00:13:03:110 848 8e0 AU # WARNING: Search callback failed, result = 0x80244019
2014-04-02 00:13:03:110 848 8e0 AU #########
2014-04-02 00:13:03:110 848 8e0 AU ## END ## AU: Search for updates [CallId = {BF690BA2-3D86-45C0-9A18-D8BC8BC47DAC} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-04-02 00:13:03:110 848 8e0 AU #############
2014-04-02 00:13:03:110 848 8e0 AU All AU searches complete.
2014-04-02 00:13:03:110 848 8e0 AU # WARNING: Failed to find updates with error code 80244019
2014-04-02 00:13:03:110 848 8e0 AU Need to show Unable to Detect notification
2014-04-02 00:13:03:110 848 8e0 AU AU setting next detection timeout to 2014-04-02 04:13:03
2014-04-02 00:13:03:110 848 8e0 AU # Publishing WNF Per user update count event Count: 0 SID {S-1-5-21-2929840714-3911456617-1138986597-1106} Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}
2014-04-02 00:13:03:110 848 8e0 AU # Publishing WNF Per user update count event Count: 0 SID {S-1-5-21-2929840714-3911456617-1138986597-1106} Service {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2014-04-02 00:13:03:110 848 8e0 AU # Publishing WNF Per user update count event Count: 0 SID {S-1-5-21-2929840714-3911456617-1138986597-1106} Service {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-04-02 00:13:03:110 848 8e0 AU # Publishing WNF Per user update count event Count: 7 SID {S-1-5-21-1674019052-998012437-141338546-1001} Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}
2014-04-02 00:13:03:110 848 8e0 AU # Publishing WNF Per user update count event Count: 0 SID {S-1-5-21-1674019052-998012437-141338546-1001} Service {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2014-04-02 00:13:03:110 848 8e0 AU # Publishing WNF Per user update count event Count: 0 SID {S-1-5-21-1674019052-998012437-141338546-1001} Service {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-04-02 00:13:06:079 848 8dc Report REPORT EVENT: {CC3A61B2-6D72-4EE5-8290-267C01BB971C} 2014-04-02 00:13:01:079+0100 1 148 [AGENT_DETECTION_FAILED] 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 80244019 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80244019.
2014-04-02 00:13:06:079 848 8dc Report REPORT EVENT: {15E44187-2503-438C-9813-EB6D81BFEA23} 2014-04-02 00:13:03:110+0100 1 148 [AGENT_DETECTION_FAILED] 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 80244019 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80244019.
2014-04-02 00:13:06:079 848 8dc Report WARNING: Failed to get ProtocolVersion: 8024043d
2014-04-02 00:13:06:079 848 8dc Report WARNING: Failed to get ProtocolVersion: 8024043d
2014-04-02 00:13:06:079 848 8dc Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-04-02 00:13:06:079 848 8dc Report WER Report sent: 7.9.9600.16422 0x80244019(0) D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2014-04-02 00:13:06:142 848 8dc Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-04-02 00:13:06:142 848 8dc Report WER Report sent: 7.9.9600.16422 0x80244019(0) D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2014-04-02 00:13:06:142 848 8dc Report CWERReporter finishing event handling. (00000000)During my initial investigation I had already confirmed both the background BITS and windows update services were running.
I can confirm that after checking my policy and amending the "Specify intranet Microsoft update service location" to the following, to include the correct port
http://App1.corp.contoso.com:8530
I have been able to resolve the issue.
Thank you for your comments
Kind regards -
Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5
My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
{CE3119AD-35EF-41CF-9C21-C7698FEB8393} 2013-10-14 21:53:00:256-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 4 updates.
{EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1} 2013-10-15 04:15:54:069-0700 1 162 101 {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3} 201 0 AutomaticUpdates Success Content Download Download succeeded.
{77DAE88F-2795-4258-8BBF-8D27E53662CF} 2013-10-15 12:10:38:196-0700 1 193 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems (KB2862330)
{1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C} 2013-10-15 12:15:25:676-0700 1 183 101 {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3} 201 0 AutomaticUpdates Success Content Install Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
{A220898A-E5FE-4FE7-8413-2B0C7B4013D0} 2013-10-15 12:15:25:766-0700 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed.
{A5400FF2-33ED-4A47-8409-13E5DFE16A6D} 2013-10-15 19:29:31:486-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 ChkWuDrv Success Software Synchronization Windows Update Client successfully detected 0 updates.
{43C533EE-775D-445E-A652-06648B72DE65} 2013-10-15 19:29:49:702-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 ChkWuDrv Success Software Synchronization Windows Update Client successfully detected 0 updates.
{D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D} 2013-10-15 19:30:05:744-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 3 updates.
{4E73B1C1-5BA2-415D-AB34-92F7AB3DB418} 2013-10-15 19:30:08:753-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 ChkWuDrv Success Software Synchronization Windows Update Client successfully detected 0 updates.
{51248882-41AC-4E59-B813-87AD326310AD} 2013-10-15 20:00:05:044-0700 1 183 101 {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6} 501 0 wusa Success Content Install Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
{FB2B8E5E-442C-4E76-B23D-6A41B4324C9D} 2013-10-16 00:11:39:832-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 c8000247 AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0xc8000247.
Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
(1) Checked Setting, set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
(2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
(3) Ran MS FIXIT
(4) Ran System File checker Scan (sfc /scannow)
(5) Ran CHKDSK /F
(6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
(7) Ran Update for Windows 7 for x64-based Systems (KB971033)
None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
Any help or guidance is appreciated.
Solved!
Go to Solution.The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
The End! -
Is it possible to create a Windows 7 Partition via Bootcamp while having an internal RAID 0 Setup ?
Is it possible to create a Windows 7 Partition via Bootcamp while having an internal RAID 0 Setup ?
Yes, just not on the RAID. Boot Camp Assistant will only partition a single drive containing OS X. You cannot partition a RAID array.
-
How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.
Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though. -
Hi Experts,
We have installed UISKPI01 in SAP NetWeaver Gateway System for Fiori Analytical Apps (KPI modeler is necessary to model the KPI) but while trying to create and Save the Group, we are Getting an error in KPI Modeler as "{"customMessage":"failed to detect the sap language of the current session language","status":500}". Similarly, when we are trying to edit the existing KPI template and assigning the Variants and Evaluations, we are facing the same error as failed to detect the sap language of the current session language","status":500.
Any idea on above error?
Thanking you,
~ MahendraHello Mahendra,
Check if you have entries in the T002 table of SAP_SSB schema.
If not follow the steps mentioned in the admin guide of SAP Smart business to populate data.
This should resolve this issue.
Note: My assumption is that, you are accessing the KPI modeler in English Language.
Thanks,
Debasish -
Windows Install fails to detect VSTO 4.0 in Windows machine
I’ve to install excel based application developed in VS 2010.
Windows installer fails while detecting VSTO in Windows 7/8/8.1. Its perquisites are .Net framework 4.0 client frame work and VSTO 4.0.
Even we have installed VSTO manually and re-run our setup and again we are getting the same error (“Installer was not able to automatically download the VSTO installation”), the custom message. Don’t know what is blocking to detect VSTO on some particular
machine. I'm using only this condition "VSTORUNTIMEREDIST>="10.0.30319" as in Launch Conditions from last 3 years.
Now from last couple of months I'm getting this error when instating my application, somehow when I add another condition i.e. VSTORUNTIMEREDIST>="10.0.30319" OR OFFICERUNTIME>=”10.0.21022”, it works properly.
I want to know that is there any windows patch is released due to which my installer is not able to detect VSTO in machine.
Thanks in advance.
Thanks Utshek Jain> Is VSTO Runtime detection depends on full edition of .NET framework?
I have never seen the client profile mentioned in MSDN. For example, take a look at the
Running Solutions in Different Versions of Microsoft Office article which provides the following info:
Version of Office targeted by the project template
Target .NET Framework of the project1
Versions of Office that can run the solution
Required runtime on end user computer
Office 2013
.NET Framework 4
or
.NET Framework 4.5
Office 2013
Office 2010
2007 Microsoft Office system2
Visual Studio 2010 Tools for Office Runtime
Office 2010
.NET Framework 4
or
.NET Framework 4.5
Office 2013
Office 2010
2007 Microsoft Office system2
Visual Studio 2010 Tools for Office Runtime
Office 2010
.NET Framework 3.5
Office 2013
Office 2010
Visual Studio 2010 Tools for Office Runtime
2007 Microsoft Office system
.NET Framework 4,
.NET Framework 4.5,
or
.NET Framework 3.5
Office 2013
Office 2010
2007 Microsoft Office system
Visual Studio 2010 Tools for Office Runtime
BTW Did you include the required interop files in the installer? -
Hi i uppdate my I phone 4 to iso6 via laptop ,during the operation the laptop restart it's self then I connect my iPhone 4 to iTunes again to finish the uppdating but its stuck to Apple log tried to restore it again via iTunes i get the same problem its stuck to Apple logo i tried to restor it from another pc i get the same problem anyone can help please
Hi, did you ever solve this problem?
My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
Any help would be much appreciated!!
Maybe you are looking for
-
Lexmark does not support USB printing with Airport express
See email from Lexmark: Hi Herman, Welcome to Lexmark e-mail support. I appreciate your query into Lexmark. Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these pri
-
Image slideshow on website not loading on mobile but works fine on other mobile browsers
I designed a mobile website for (esinrestaurant.com). This is a new site and when I was trying to look at it today on Firefox 21.0 on my Droid (4.0) phone, I noticed that the slideshow that is supposed to appear on the Home page just below the logo,
-
Mouse pointer disappearing when recording audio?
I'm having trouble recording audio in presenter -- when I get started recording, after the first slide the mouse pointer seems to disappear onscreen. I can't do anything except clicking escape which brings up the save window and I can use my keyboard
-
I just received my iPad2 today. When I turned it on it only showed a USB cable and the iTunes icon. What does this mean?
-
Hi everybody, is it possible to import a local DC or a local Software Component into a DTR Track? If yes, how can i do that? Best regards, Sid