Fail to install O365 additional product once some already installed

Hi community,
I have following issue trying to install additional O365 product in case some product already present on my virtual machine(VM). I mean I can install several products at once e.g. OfficeProPlus, Visio and Project. But in case OfficeProPlus already installed
installation of Visio or Project fails. running installation using admin account with UI I get error code 255-11 and a message "Something went wrong". If I launch silent installation without UI under SYSTEM account (using psexec) installation exits
with error code 17002.
VM is a clean Windows 7 installation with only C++ Redist, .Net and Silverlight installed. In my case I'm using O365 Project and O365 Visio. It actually installed by same downloaded installation media. I mean Office, Project, Visio and SharePoint
designer installed from same installation media using C2R installer and different XML files.
The log file my client version is too low. But the client is installed together with Office software and when I launch for example Word and go File -> Account menu and try to Update it nothing happen as the Office version is already the latest one.
Not sure what am I doing wrong. Could you please assist me with any advice?
O365 is a latest version:15.0.4631.1002
C:\Program Files\Microsoft Office 15\ClientX86\OfficeClickToRun.exe is version 15.0.4631.1001
Click2Run setup.exe version latest present on MS download web page: 15.0.4623.1001
Here is the log with error:
38:25.676 SETUP (0x8d8) 0x264  Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run ambtx Medium ClientValidator::CheckPreReq: C2R service is running.
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run an8wz Medium ClientValidator::CheckPreReq: Client located here C:\Program Files\Microsoft Office 15\ClientX86\OfficeClickToRun.exe is version 15.0.4631.1001
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run ap2j2 Medium ClientValidator::CheckPreReq: Current client version is located here C:\Program Files\Microsoft Office 15\ClientX86\OfficeClickToRun.exe
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run ambt0 Medium ClientValidator::CheckPreReq: Current client version is version 15.0.4631.1001 available is 15.0.4631.1002
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run ap2j3 Medium ClientValidator::CheckPreReq: Comparison result: -1
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run ap2j4 Medium ClientValidator::CheckPreReq: Version of client too low to install with: Have: 15.0.4631.1001 Need: 15.0.4631.1002
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run an8w0 Medium ClientValidator::CheckPreReq: returning: 0.
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run anhmp Medium Prereq::ShowPrereqFailure: A Prereq check has failed. Client update needed. We are sorry, but we could not complete the installation. Please try
again later.
http://officeredir.microsoft.com/r/rlidC2RErrorToAsset?scenario=ClickToRun&errorCode=9&ErrorSource=BOOTSTRAPPER_PREREQ&exceptionType=clientVersion&lang=en-us&crc32=0
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run aoh88 Medium RunPrereqs::HandleStateAction Prereq check has failed.
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run aoh9d Medium HandlePrereqFailure::HandleStateAction: Need to update the client.
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run ap2j6 Medium TryConfigureClient::HandleStateAction: No config file. Using default values for parameters.
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run ambt2 Medium TryConfigureClient::HandleStateAction: C2R service is running.
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run amayg Medium TryConfigureClient::HandleStateAction: Found OfficeClickToRun.exe
07/11/2014 16:38:25.676 SETUP (0x8d8) 0x264  Click-To-Run aoh9t Medium TryLaunchClient::HandleStateAction: Launching OfficeClickToRun.exe with parameters: scenario=CLIENTUPDATE acceptalleulas="True" cdnbaseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675"
productreleaseid="none" displaylevel="False" culture="en-us" baseurl="C:\New folder" lcid="1033" platform="x86" updatebaseurl="<bla bla bla>" updatesenabled="True"
version="15.0.4631.1002" productstoadd="SPDRetail_en-us_x-none"
07/11/2014 16:38:27.116 SETUP (0x8d8) 0x264  Click-To-Run aoh9n Medium TryGetClient::HandleStateAction: Installation path is: C:\Program Files\Microsoft Office 15
07/11/2014 16:38:27.116 SETUP (0x8d8) 0x264  Click-To-Run amaya Medium TryGetClient::HandleStateAction: Looking for existing client.
07/11/2014 16:38:27.116 SETUP (0x8d8) 0x264  Click-To-Run amayb Medium TryGetClient::HandleStateAction: Found C2R Client at: C:\Program Files\Microsoft Office 15\ClientX86\OfficeClickToRun.exe
07/11/2014 16:38:27.116 SETUP (0x8d8) 0x264  Click-To-Run aoh9t Medium TryLaunchClient::HandleStateAction: Launching OfficeClickToRun.exe with parameters: scenario=unknown acceptalleulas="True" cdnbaseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675"
productreleaseid="none" displaylevel="False" culture="en-us" baseurl="C:\New folder" lcid="1033" platform="x86" updatebaseurl="bla bla bla" updatesenabled="True" version="15.0.4631.1002"
productstoadd="SPDRetail_en-us_x-none"
07/11/2014 16:38:37.679 SETUP (0x8d8) 0x264  Click-To-Run apx75 Monitorable TryLaunchClient::HandleStateAction: C2R Client returned failing error code 17002
07/11/2014 16:38:37.679 SETUP (0x8d8) 0x264  Click-To-Run aoh72 Medium ExitBootStateMachine::HandleStateAction: Bootstrapper workflow exiting with result: 0x0
07/11/2014 16:38:37.679 SETUP (0x8d8) 0x264  Click-To-Run aoh9z Medium AdminBootstrapper::Main: Installation came back with 17002.
07/11/2014 16:38:37.679 SETUP (0x8d8) 0x264  Logging Liblet aqc99 Medium Logging liblet uninitializing.

Hi,
As per the log, it seems your current client version doesn't match the version of Office that you are trying to install.
Please go to update your existing Office 365 Pro Plus and make sure you have the matched version then try again and verify result.
You can try to do a online repair to your existing office program, that's the basic troubleshooting to repair error 255-11.
Thanks,
Ethan Hua CHN
TechNet Community Support

Similar Messages

Hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Some Updates Failed to Install (Adobe Master Collection CS5 on OS X Yosemite)

After reformatted MacBook Air hard drive then installed OS X Yosemite. I have received “Some updates failed to install” message on Adobe Application Manager: “There was an error downloading this update. Please quit and try again later.”
However, I surfing on Adobe Product Updates website Product updates but cannot find these three affected [error] messages updates: Adobe After Effects CS5 10.0.2, Adobe Pixel Bender Toolkit 2.5 update and Adobe Premiere Pro CS5 version 5.0.4 update.
Please advise. Many thanks!
All the best,
James

Thank you so much! Also, I have download other updates manually from http://www.adobe.com/ca/downloads/updates.html
Your help will immensely.

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem. I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction. Thank you!

update directly, Product updates

Some updates failed to install

I have CS5 and when I try to update, I get "Some updates failed to install." If I click on Contact Customer support, it comes up with "Error "This serial number is not for a qualifying product..." when installing an upgrade or upsell. I have had this software for 4 years and until 2 weeks ago not had a problem with updating. Any suggestions? I tried everything I found on Adobe short of deactivating and reinstalling the software. Thank you!

These questions are best asked in the Downloading, Installing and Setting Up forum where the techies and technical staff reside:
Downloading, Installing, Setting Up

Workflow Manager 1.0 - We're sorry the product failed to install

I know the title is the same as a previous post, but that was over a year ago and my issue was not in any of the replies.
I have a development SharePoint 2013 system running on a VM of Windows Server 2012 R2. SQL Server 2012 R2 Enterprise is also installed on the same VM. Has 30GB of free disk space and 12GB RAM. This VM is NOT a DC but is patched with all
the latest updates.
Each time I download and run the Web PI and Add WorkFlow Manager 1.0, it appears to install, then I get the message:
We're Sorry. The following products have failed to install.
Windows Manager Client 1.0 Refresh
This product did not download successfully: An exception occurred during the WebClient request.
Microsoft Windows Fabric V1 RTM
This product did not download successfully: An exception occurred during the WebClient request.
Service Bus 1.0
This product cannot be installed because a product that it depends on did not install successfully.
Workflow Manager 1.0
This product cannot be installed because a product that it depends on did not install successfully.
The following products were successfully installed.
Execute ASP.NET IIS registration tool
I have attempted several times and different ways, but it will not install. Even tried the Offline installation as well with no success.
Any suggestions?

Hi,
For CU there are Prerequisites, please check the following requirements:
Software requirements:
PowerShell 3.0 must be installed on the computer to be updated. PowerShell 3.0 is included in the Windows Management Framework 3.0 installation. Go to Windows Management Framework 3.0 to install this update.
Workflow Manager Client 1.0 must be installed on the computer.
For computers that have Workflow Manager 1.0 installed, the following additional requirements apply:
The Service Bus for Windows Server cumulative update must be installed on the whole computer farm before you install the cumulative update for Workflow Manager 1.0
also Service Bus for Windows Server must be installed on the computer.
You must have administrative credentials on the computer where you are installing the software.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Bought a new iMac 27" yesterday. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applicati

I bought a new iMac 27" yesterday, running with Mavericks OS. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?

update manually,: http://www.adobe.com/downloads/updates/

Adobe CS5 Design Standard - Some updates failed to install

I am tying to find a solution to this problem, and am unable to find a way to contact Adobe directly for customer assistance. When I click on the Customer Support link at the bottom, the page that loads says, "Error 'This serial number is not for a qualifying product...' when installing an upgrade or upsell." I didn't install an upgrade version of CS5, and I didn't have it on more than one computer. My hard drive crashed at the end of 2013, and I had to replace it with a new one. I wasn't able to deactivate the product on the old hard drive, but it installed just fine on the new one. Now the updates will not work.
Does anyone know how to fix this or how to contact Adobe directly for help? Thanks.

I am also experiencing this same issue. I purchased the CS5 Master Collection in 2011 and it is now failing to install updates. My Adobe Application Manager is giving me the same error messages that you are getting. The Customer Support link takes me to the same website. Adobe Support just told me to come on here to find the answers that I seek because CS5 is no longer supported by support specialists. It's pretty discouraging to see that nobody has answered you since you posted this in July.

Installation failed installation completed through some components failed to instal correctly

Hello i've been really exited to donload photoshop and so i decided to try the free version i downloaded creative cloud and went into th eapps and click on photoshop try it free i waited a few 30 mins and it stopped and told me this
installation failed installation completed through some components failed to instal correctly.
and then i was like whatttt?!?!?!?!?
so I decided to come here and ask why this is happening please answer ASAP I really need photoshop for important stuff!!!

Try restarting your computer, then try again. Awhile back, some of the apps which I think included photoshop require the microsoft runtime to be updated. That runtime requires a restart to finish installing. But since it is a piggyback program, the error code telling you do so is hidden in the log file.
If it still does not install let us know.

Instalation completed though some aditional components failed to install correctly

Hello, I've been trying to download Photoshop CC, but when the download is close to finish it fails and it says that the instalations has failed. When I click to know more about it, this is what it says "Instalation completed though some aditional components failed to install correctly" . When I click for more information about the problem, this is what I get :
<PRE>Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Laura\AppData\Local\Temp\{A3AC58B4-FAAA-4FC2-9407-0180A8787224}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com
</PRE>"
Can someone please tell me how to fix this?
thank you!!!!!!

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

Installation completed though some option components failed to install correctly

When I went to Install Premiere Pro from the Creative cloud I got a message saying
"Installation failed
Installation completed though some optional components failed to install correctly.
(6)"
There's a "More information" button that linked me to this text.
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR: DF023, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Gio\AppData\Local\Temp\{0BB1038C-1194-4E3E-A8EA-8DE277D171E1}\PremierePro_8_LS2 0\Adobe Premiere Pro CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: Required Common Fonts Installation x64 3.0.0.0 {7AD01D2D-A294-48FD-AD17-A04C59AEF734} -----------
ERROR: DF023: Unable to delete backup file at "C:\adobeTemp\backup\adobetmp01558740" Error 5 Access is denied.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 53)
ERROR: DW063: Error committing command ARKDeleteFileCommand(Seq 53)
Any suggestions?

Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
or
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Download & Installing ERROR: "Installation failed; Installation completed though some optional components failed to install correctly. (6)"

"Installation failed; Installation completed though some optional components failed to install correctly. (6)"
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86).
Any ideas on how to fix this problem?

Go to Control panel>> Uninstall a program>> Uninstall Microsoft Visual C++ 2012 and restart the machine.
After restarting try the installation.

Download Failed:Installation completed though some optional components failed to install correctly

When I try to download Lightroom CC and Photoshop CC I get this error: Installation completed though some optional components failed to install correctly

Nobody can tell you anything without proper system info or other technical details.
Mylenium

Installation completed though some optional components failed to install correctly.(6)

while installing Photoshop cc" installation completed though some optional components failed to install correctly.(6)" this massage appear close to 82% download my free trial of one month. can you help me ?

Go to Control panel>> Uninstall a program>> Uninstall Microsoft Visual C++ 2012 and restart the machine.
After restarting try the installation.

I purchased Fifa13 from the App Store, downloaded it in my pc..,but whrn i am trying to install it in my iad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa

I purchased Fifa13 from the App Store, downloaded it in my pc..,but when i am trying to install it in my ipad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa13"
What can i do?
btw....,its happeniing only wth the fifa13, installed other apps from pc previously.

anybody answer me fast

Fail to install O365 additional product once some already installed

Similar Messages

Maybe you are looking for