Failed process not in SXMB_MONI_BPE list
Hi,
I'm on Pi7.1 and have a BPM monitoring related problem: In SXMB_MONI I can see, that my process was aborted due to a faild send action (target system not reachable). When I invoke SXMB_MONI_BPE the process instance is not contained in the list of failed processes. Analyzing the BPM inbound processing queue (SQM2) I can find a stuck queue exposing the error messages "Permanent error in BPE inbound processing".
Does anybody have an idea, why the related business process is not contained in the list of faild processes in SXMB_MONI_BPE? - this was the case on XI3.0 -
Kind regards,
Heiko
Hi Heiko,
Check the OSS note 1126656 - BPE-TS: Permanent errors in the BPE inbound processing
In parrallel goto TCODE "SWF_XI_CUSTOMIZING".
Check whether ,any errors are there.
All entries related workflow or integration process should be with out any errors and active.
Regards,
Similar Messages
-
ProcessControl invocation failed - Process not found
I have built and deplyed a small integration application. When I try to test this
application I get the following run-time error:
[WLI-Core:530214]ProcessControl invocation failed[Service at /TestWeb/process/AddProcess.jpd
not found]
caused by: : com.bea.wlw.runtime.core.dispatcher.ServiceHandleException: Service
at /TestWeb/process/AddProcess.jpd not found
I am pretty sure that this process is deplyed on the server. I can see the following
modules deployed in the WebLogic console:
.workshop/TestWeb/EJB/AddProcess_54emdkdnnj
.workshop/TestWeb/EJB/AddProcessControl_54emdkdnnj
The JNDI tree also has entries for /TestWeb/process/AddProcess and /TestWeb/process/AddProcessControl.
Any idea what is going on?
Thanks.Well, I cannot reproduce the problem anymore. I don't know what changed!
Steven Ostrowski <[email protected]> wrote:
And does the WLI Console show AddProcess under the Process Instance Monitor?
Naresh Bhatia wrote:
I have built and deplyed a small integration application. When I tryto test this
application I get the following run-time error:
[WLI-Core:530214]ProcessControl invocation failed[Service at /TestWeb/process/AddProcess.jpd
not found]
caused by: : com.bea.wlw.runtime.core.dispatcher.ServiceHandleException:Service
at /TestWeb/process/AddProcess.jpd not found
I am pretty sure that this process is deplyed on the server. I cansee the following
modules deployed in the WebLogic console:
.workshop/TestWeb/EJB/AddProcess_54emdkdnnj
.workshop/TestWeb/EJB/AddProcessControl_54emdkdnnj
The JNDI tree also has entries for /TestWeb/process/AddProcess and/TestWeb/process/AddProcessControl.
Any idea what is going on?
Thanks. -
Dear SharePoint Experts,
Please help.
Why does my simple formula work in Excel but not-work in SharePoint?
Why does this formula...
=IF([Request Type]="Review",(IF(ISBLANK([Request Date]),FALSE,TRUE)),TRUE)
...work in Excel but fail when I try to use it in SharePoint?
The intent of this formula is the following...
If the field "Request Type" has the value "Review" and the field "Request Data" is blank then show FALSE, otherwise show TRUE.
SharePoint saves the formula, but when a list item is saved where the formula is implemented, (under List Settings, List Validation), SharePoint does not, say anything other than that the formula failed.
Note that the "list data validation failed" error only happens when I am creating a new item-- the formula above works just fine when one is trying to Save on the edit form.
Can you help?
Thanks.
-- Mark KamoskiDear Jason,
I appreciate your efforts.
However, it seems to me that this statement of yours is not correct...
"If it meet the validation formula, then you can new or edit the item, otherwise, it will throw the 'list data validation failed' error, it is by design".
I believe this is NOT the answer for the following reasons.
When I create a new item and click Save, the validation error is "list data validation failed".
When I edit an existing item and click Save, the validation error is "my custom error message" and this is, I believe, the way it needs to work each time.
I think, at the core, the error my formula does not handle some condition of null or blank or other default value.
I tried a forumla that casts the date back to a string, and then checked the string for a default value, but that did not work.
I tried looking up the Correlation ID in the ULS when "list data validation failed" occurs, but that gave no useful information because, even though logging was set to Verbose, the stack trace in the error log was truncated and did not given any
good details.
However, it seems to me that SharePoint 2013 is not well-suited for complex validation rules, because...
SharePoint 2013 list-level validation (NOT column-level validation) allows only 1 input for all the multi-field validation formulas in a given list-- so, if I had more than 1 multi-field validation rule to implement on a given list, it would need to be packed
into that single-line-of-code forumla style, like Excel does. That is not practice to write, debug, or maintain.
SharePoint 2013 list-level validation only allows 1 block of text for all such multi-field validation rules. So that will not work because I would have something like "Validation failed for one or more of the following reasons-- withdrawal cannot exceed
available balance, date-of-birth cannot be after date-of-death,... etc". That will not work for me.
The real and awesome solution would simply be enhancing SP 2013 so that column-level validation forumlas are able to reference other columns.
But, for now, my workaround solution is to use JavaScript and jQuery, hook the onclick handler on the Save button, and that works good. The only problem, is that the jQuery validation rules run before any of the column-level rules created with OOTB
SP 2013. So, in some cases, there is an extra click for the enduser.
Thanks,
Mark Kamoski
-- Mark Kamoski -
hello,
Using INFO PATH 2013 on Windows 7 64 bit, user is getting the error "Infopath has encountered an error. The operation failed. Not enough storage is available to process this command"
We added the registy IRPStackSize and set it to max 50. This works on my test machine but not this user.
So when using infopath designer 2013, then blank form and data connection, we select Receieve Data-->Sharepoint Library or list and then enter the url to connect to and the user gets the error "Infopath has encountered an error. The operation failed.
Not enough storage is available to process this command"
We use office 365 of course with Sharepoint.
I am able to run infopath 2013 as an admin and I am able to connect fine, but not with his standard profile.
Any ideas, please let me know.
Best regards,<br/> <br/> <strong>Joe C<br/> </strong>Partner Online Technical Community<br/> -----------------------------------------------------------------------------------------<br/> We hope you get value from
our new forums platform! Tell us what you think:<br/> <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads"><span style="color:#0033cc">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads<br/>
</span></a>------------------------------------------------------------------------------------------<br/> This posting is provided "AS IS" with no warranties, and confers no rights <hr>side note, i am able to connect on his pc with a standard user account so something with his windows profile that's corrupted, anyone know?
Best regards,<br/> <br/> <strong>Joe C<br/> </strong>Partner Online Technical Community<br/> -----------------------------------------------------------------------------------------<br/> We hope you get value
from our new forums platform! Tell us what you think:<br/> <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads"><span style="color:#0033cc">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads<br/>
</span></a>------------------------------------------------------------------------------------------<br/> This posting is provided "AS IS" with no warranties, and confers no rights <hr> -
I am encountering following event log in SC2012 Operations Manager and Reporting Tab is not loading in Operations Console.
Report deployment process failed to request management pack list from SQL RS Server. The operation will be retried.
Exception 'WebException': The request failed with HTTP status 401: Unauthorized.Hi,
Can you acess http://reportserver/reports from a web browser on the OpsMgr server?
Moreover,you can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot
as necessary if it fails to connect.
For more information, please review the link below:
The easy way to test SQL connectivity
http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
FAIL: process disp+work.EXE Dispatcher not running
Hi All,
I've reinstalled OS and installed NW 7.01 ABAP Trial. The installation is fine (no error). At the time I "start application server" through "SAP NW 7.01 ABAP Trial Version => NSP => Start Application Server", it shows the error on command dos window as below:
===================================================
============== Starting System NSP ================
===================================================
=============== Starting database instance ...
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
The MaxDB Database Starter, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
OK
============== Starting ABAP instance ...
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
12.10.2008 12:25:40
Start
OK
12.10.2008 12:25:50
StartWait
FAIL: process disp+work.EXE Dispatcher not running
============== Start operation timed out !
Press any key to continue . . .
Please help me out,
PeerasitClean uninstall and delete 'sapdb; and 'SAP' folders. Then reinstall again.
-
FAIL: process hdbdaemon HDB Daemon not running - HANA
Hello guys,
I'm not being able to start a SAP HANA instance. Here's the output of the HDB start command:
I've already check the free space on the files systems as you can see here:
I can't figure out what is happening. Any suggestions?
Regards.The startup error is somewhat misleading as Serge commented above:-
> FAIL: process hdbdaemon HDB Daemon not running
In a recent HEC HANA DB startup error scenario, the clue was this message in the startup.log file in the trace directory:-
> Unable to change to Directory /usr/sap/<SID>/HDB<nn>/vh<cid><sid>db01/trace
It turned out that the profile was edited with the incorrect instance number <nn>. After correcting this error, HANA DB started up successfully. -
Can connect but not retrieve file list (VSFTPD) from within network
Hi!
I've got a D-Link DIR-100 wired router to which an Airport Express and an MSI Wind (Arch Linux server) is connected. I can connect to the Wind from outside the LAN, which includes SSH, HTTP and FTP. However, FTP won't work if I'm inside the LAN. The Wind has the IP 192.168.0.101 in the network, and I forwarded the port 22 for SSH, 80 and 443 for HTTP and 20-21 for FTP. I'm using OpenSSH, Apache, and VSFTPD.
When trying to connect with Transmit (OS X) I get this error message:
[b]Could not retrieve file listing.[/b]
Server said:
Illegal PORT command.
Error -162: PORT failed
The Transmit log looks like this:
Transmit 3.6.7 Session Transcript
LibNcFTP 3.2.1 (August 13, 2007) compiled for UNIX
Uname: Darwin|asynja.local|8.11.1|Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386|i386
220: (vsFTPd 2.1.0)
Connected to www.mydomain.se.
Cmd: USER myusername
331: Please specify the password.
Cmd: PASS xxxxxxxxxx
230: Login successful.
Cmd: TYPE A
200: Switching to ASCII mode.
Logged in to www.mydomain.se as myusername
Cmd: SYST
215: UNIX Type: L8
Cmd: PWD
257: "/home/myusername"
Cmd: PASV
227: Entering Passive Mode (192,168,0,101,227,13).
Fixing bogus PASV data address from 192.168.0.101:58125 to XX.XXX.XX.XX:58125.
Data connection timed out.
Falling back to PORT instead of PASV mode.
Cmd: PORT 192,168,0,102,204,170
500: Illegal PORT command.
Cmd: NOOP
200: NOOP ok.
Cmd: PORT 192,168,0,102,204,171
500: Illegal PORT command.
(I edited out the IP and login credentials.)
If I try to connect to 192.168.0.101 though it works like a charm. How come I can't use the same adress? I can visit the external IP/HTTP in a browser, I can connect to it through FTP, but I can't view the files?Interestingly, the errors above seem to be a little bit of a
red herring. If I turn off "enable file check in and check out" in
Dreamweaver then files can be downloaded, edited and uploaded
perfectly. I can also create new files. As soon as I turn checkouts
back on, it stops working. The errors above show up in the Apache
server log even when this box is unchecked and yet everything works
correctly. Because Contribute offers no option for editing without
writing extra info files to the server it still won't work.
The Dreamweaver log shows the following when I attempt to
check out a file:
Started: 12/19/08 6:25 PM
Operation timed out. Cancelling...
Operation timed out. Cancelling...
/webdav/robots.txt - error occurred - An HTTP error occurred
- cannot get robots.txt. Dreamweaver could not connect because the
server is down or not accepting connections.
File activity incomplete. 1 file(s) or folder(s) were not
completed.
Files with errors: 1
/webdav/robots.txt
Finished: 12/19/08 6:27 PM
As I mentioned, when I turn off checkouts this whole process
works correctly, and I can edit and create new files. -
Hi
I have created a very simple BPM process in BPM Studio 10Gr3. It is processed as a Web Service and takes in a string and outputs a string (synchronous). The trouble I am having is once it has been deployed onto a clustered environment, I then attempt to call the process from SOAP UI but unfortunatly it just hangs and eventually timesout.
I know the process is running because I can see it in the BPM log viewer and I have outputted additional log messages from the process to the log viewer. However I do not get a response back from the process.
I would appreaciate any help with this.
My setup includes a clustered Weblogic Environment and I have set authentication type to: Username Token Profile.
Thanks
SaheemHi Shamila,
To me this looks like a configuration issue. You can trouble shoot it this way
First try to check if the web services is up and running
Second check your configuration, for this, in NWA Manage Processes application get all the 'failed processes'
-check if your in-progress process is listed here-
- if so then open the Error log tab for the process in the details section in Manage Process
- See the logs listed here; generally the last log will tell you if your configuration is correct or not
-if you figure out that the configuration isn't done or is improper then correct the same in provider systems and/or application communication configuration
- then once this is done, re-query the failed process and use the "Recover" option
Regards,
Harsha -
BPM Process not getting started
Dear All,
I have created a BPM Process, and have attached a webservice with the start event.After deploying the Process DC I am getting my start webservice in my wsnavigator. When I am executing the start webservice I am getting the following error.
Web service returned error. Fault Code: "(http://schemas.xmlsoap.org/soap/envelope/)Server" Fault String: "Process start has been triggered."
But my process is inprogress but not getting proceeded to the next step , it is stuck in start itself.
how can i make my webservice work?
Regards,
ShamilaHi Shamila,
To me this looks like a configuration issue. You can trouble shoot it this way
First try to check if the web services is up and running
Second check your configuration, for this, in NWA Manage Processes application get all the 'failed processes'
-check if your in-progress process is listed here-
- if so then open the Error log tab for the process in the details section in Manage Process
- See the logs listed here; generally the last log will tell you if your configuration is correct or not
-if you figure out that the configuration isn't done or is improper then correct the same in provider systems and/or application communication configuration
- then once this is done, re-query the failed process and use the "Recover" option
Regards,
Harsha -
Objects Locked by Failed Process Chain
HI,
I cannot update certain infopackages as they are locked by a failed Process Chain update, however I have checked sm12 and there are no locked items showing, also I have gone into RSA1 --> tools Attrib Change Run and into the InfoObject List and ther are no objects so i cant run the Atrrib change run from their either.
So if there is no locked items in Sm12 well then how do i unlock them?
Do i need to mark the failed Process chain as complete or something?
Thanks.Is this in the Source Code tab? Sorry i do not see where i should input the Timestamp or where i actually run the RSDDS_AGGR_MOD_CLOSE function module?
This is the code i see when i Run SE37 with RSDDS_AGGR_MOD_CLOSE
FUNCTION RSDDS_AGGR_MOD_CLOSE.
""Lokale Schnittstelle:
*" IMPORTING
*" REFERENCE(I_CNSID) TYPE RSSID
*" EXCEPTIONS
*" X_MESSAGE
DATA: l_timestmp type rs_timestmp.
get time stamp field l_timestmp.
UPDATE RSDDAGGRMODSTATE set closedfl = rs_c_true
TIMESTMP_END = l_timestmp
where cnsid = i_cnsid.
IF SY-SUBRC NE 0.
perform x_message using 'RSDDS_AGGR_MOD_CLOSE-1-'.
ENDIF.
ENDFUNCTION. -
All DPs read "Failed to retrieve the package list on the distribution point"...
About 2 weeks ago all 10 of my DPs started reporting the following warning (roughly 2 weeks after upgrading to R2):
"Failed to retrieve the package list on the distribution point ["Display=\\<server.FQDN>\"]MSWNET:["SMS_SITE=<code>"]\\<server.FQDN>\. Or the package list in content library doesn't match the one in WMI. Review
smsdpmon.log for more information about this failure.
This warning has appeared in my environment once before and I've read a number of posts regarding it. In the previous situation I found the problematic package ID recorded in smsdpmon.log and followed the standard procedure of redistributing and then proceeded
with a validation check on the affected DP. These steps resolved the issue originally.
This time around the package ID is not referenced in smsdpmon.log. It had the same error but the ID was not listed. Unfortunately the logs have already rolled over and I forgot to save a copy so I don't have anything to reference. I'm curious if anyone else
has seen this behavior and what the recommended fix is.
As always, appreciate the help!I used the following process to clean up these warnings on my DPs:
Setup content validation checks for each of my affected DPs to run every morning (previously only set to weekends). I did this so when I made a change I could validate whether or not it worked the following day. It would be great if there was a way to force
these checks manually but I haven't found a method yet.
After the content validation check completed I filtered through the smsdpmon.log on each affected DP. This revealed the package ID that was causing the issue.
In my environment the package in question was not needed so I deleted it. If it is required I suspect re-distributing it would work as well.
At this stage the problem was still not fully resolved for me. Even though I had deleted the package WMI was still inaccurate. I used this script to scrub WMI on all affected DPs and it picked up the problematic package ID:
http://gallery.technet.microsoft.com/Powershell-script-to-fix-81dc4e69
My content validation checks are now passing and the warnings are being cleared. YEAH!
As a final note - After running the PS script Nickolaj posted I ran started seeing dozens of error checks on my packages (Distribution Manager failed to process package "Laptop Drivers" (package ID = XYZ00123).) After doing some research
I found I was prone to this issue:
Failed to start DP health monitoring task. In my case the suspect file was called "Microsoft". I moved it to another location and the errors cleared immediately.
Hope this info is helpful to others! -
IDOC number is not in the list
Hi,
I am creating an inbound delivery using IDOC. The message type is DESADV and basic type is DELVRY01. After I have populated the control and data tables, I processed them using IDOC_WRITE_AND_START_INBOUND. I have generated the IDOC number after executing the program. The problem is, when I go to WE02, the idoc number is not the list. I am not sure if the IDOC I generated is successful or not. Does it have something to do with the FM that I used. I set a custom process code that will call the FM IDOC_INPUT_DESADV1. Please advise. Thanks in advance.
LalynHi Arun,
Thanks for the reply. But the IDOC number is not in the list and I can't access it WE19. Do you have any other Function module that I can use to process the IDOC in ABAP? The Function module should be the one to call the FM IDOC_INPUT_DESADV1 to create an inbound delivery. That's what I think causes the error. Thanks.
Lalyn -
I am trying to troubleshoot a slow iMac. EtreCheck showed that com.adobe.CS5ServiceManager.plist failed. Not sure if this is important or how to fix. Any suggestions?
BobHarris: Thanks. The EtreCheck output follows:
Problem description:
My iMac is very slow.
EtreCheck version: 2.2 (132)
Report generated 4/22/15 2:28 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2010) (Technical Specifications)
iMac - model: iMac11,2
1 3.06 GHz Intel Core i3 CPU: 2-core
4 GB RAM
BANK 0/DIMM0
Empty
BANK 1/DIMM0
Empty
BANK 0/DIMM1
2 GB DDR3 1333 MHz ok
BANK 1/DIMM1
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: Unknown
Video Information: ℹ️
ATI Radeon HD 4670 - VRAM: 256 MB
iMac 1920 x 1080
System Software: ℹ️
Mac OS X 10.7.5 (11G63) - Time since boot: 2:36:57
Disk Information: ℹ️
ST3500418AS disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (372.93 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
hp psc 1300 series
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
LaCie LaCie Hard Drive Quadra 1 TB
disk1s1 (disk1s1) <not mounted> : 32 KB
Partition 1 (disk1s3) /Volumes/Partition 1 : 333.27 GB (31.07 GB free)
Partition 2 (disk1s5) /Volumes/Partition 2 : 333.27 GB (84.70 GB free)
Partition 3 (disk1s7) /Volumes/Partition 3 : 333.27 GB (36.70 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[loaded] com.coupons.coupond.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[not loaded] com.adobe.SwitchBoard.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
HP IO Classic Proxy 2 Application Hidden (/Library/Frameworks/HPServicesInterface.framework/Versions/B/Runtime/HP IO Classic Proxy 2.app)
HP IO Classic Proxy Application Hidden (/Library/Frameworks/HPServicesInterface.framework/Versions/A/Runtime/HP IO Classic Proxy.app)
Director Docker Application (/Applications/Hewlett-Packard/HP Photo and Imaging Software/HP Photo and Imaging Director/Director Docker.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
CouponPrinter-FireFox_v2: Version: 5.0.3 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
QuickTime Plugin: Version: 7.7.1
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Growl [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% fontd
2% WindowServer
0% coreservicesd
0% mds
0% blued
Top Processes by Memory: ℹ️
78 MB mds
41 MB Finder
33 MB mdworker(3)
29 MB WindowServer
29 MB Dock
Virtual Memory Information: ℹ️
2.60 GB Free RAM
1.40 GB Used RAM
0 B Swap Used
Diagnostics Information: ℹ️
Apr 22, 2015, 11:38:18 AM /Users/[redacted]/Library/Logs/DiagnosticReports/helpd_2015-04-22-113818_[redac ted].crash
Apr 21, 2015, 02:37:28 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Adobe Premiere Pro CS5_2015-04-21-143728_[redacted].crash
Apr 22, 2015, 11:51:45 AM Self test - passed -
After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one, When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine. How do I correct this. I am using Windows 8.1 . My wife has never had an iTuunes account
Hello Lakesidetom,
It sounds as though you are experiencing an issue with an Apple ID and authorizations. Based on your post, it sounds like you are familiar with the authorizing and deauthorizing process. The Apple ID in question (your wife's email) may be originating from the iPhone you are attempting to update. Is it possible that your wife created an Apple ID or iCloud account which is signed in on that iPhone? Below, I have included links to some resources that may help you determine if your wife has created an Apple ID:
How to find your Apple ID - Apple Support
Use these steps if you forgot your Apple ID or aren't sure that you have one.
Apple - My Apple ID
If you can't remember your Apple ID, just provide us with some information and we'll find it for you. Then we'll help you reset your password.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D
Maybe you are looking for
-
Why is Adobe Creative Cloud causing Cocktail.app to crash?
Chasing error messages, I found that while ACC was active, the Scheduler in Cocktail 7.1 fails. When I quit ACC, it works. When I restart ACC, Scheduler fails. It's first log message when failing is: "Could not get path to main bundle." This collisio
-
Tolerance limit for GR/IR clearing
Dear All, As we aware that while doing F.13, system will creates clearng document only the corresponding PO balances is zero, but one of my client scenario is he had posted GR for Rs.100/- and IR is done for for Rs.99/- and when he runs F.13, system
-
Stock overview on basis of product hierarchy (PRDHA)
Hello to All, Is there any SAP standard report of displaying stock overview on basis of the 'product hierarchy' (Field: PRDHA) or do i have to make a copy of the transaction (MMBE) and add the respective field .. Looking forward to your feedback. Tha
-
How to use connec with java 6.0 ?
I often use the function below to connect Database: public Connection getConnection(){ try{ Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); conn=DriverManager.getConnection("jdbc:odbc:EmployeeManagerDB","sa","sa"); System.out.println("Get connect
-
New hard disk for HP Pavilion All-in-One MS228sc
I need to get af new hard disk drive for my HP Pavilion All-in-One MS228sc. I have great difficulties in getting in touch with HP denmark since my product is out of waranty. My questions is if the PC can handle a disk larger than my current on on 500