Failed to complete the deployment

<BEA-149201> <Failed to complete the deployment task with ID 0 for the application
opt4-ejb8.
weblogic.management.NoAccessRuntimeException: Access not allowed for subject:
principals=[], on ResourceType: ApplicationConfig Action: execute, Target: notifyDeployment
[myserver.log]

I would set "prefer-web-inf-classes" to "true" in your "weblogic.xml" file. Without this, you may be getting classloader confusion with some of the commons jars that are used within WebLogic.

Similar Messages

BACKUP failed to complete the command BACKUP DATABASE. Check the backup application log for detailed messages.

Hi,
We have a back up that is failing.
The error is "BACKUP failed to complete the command BACKUP DATABASE RPS. Check the backup application log for detailed messages.".
As I understand it the backup application log is at C:\Program Files\Microsoft SQL Server\MSSQL.2\MSSQL\LOG. From that all I get is
2014-03-05 14:49:29.41 Backup Error: 3041, Severity: 16, State: 1.
2014-03-05 14:49:29.41 Backup BACKUP failed to complete the command BACKUP DATABASE myDb. Check the backup application log for detailed messages.
The command I am using is
BACKUP DATABASE [MyDb]
TO DISK = N'D:\Domains\SQL_Backup\DB\myDb\Mydb_FullBackup_20140305_1100.bak'
WITH NOFORMAT, NOINIT, NAME = N'mydb-Full Database Backup', SKIP, NOREWIND, NOUNLOAD, STATS = 10
GO
The database is Microsoft SQL Server Standard Edition (64-bit) Version 9.00.1399.06.
The computer is Windows server 2003 R2 Standard Edition SP2
The Db is 191 Gb and there is 227 Gb available on the D drive where it's being backed up to.
Any thoughts as to how I can track down the problem.
Is the 227Gb of spare disk space big enough to back up a 191 Gb database?
If not how much is needed?
Thanks

Hello,
Can you apply latest service pack .I dont know but guess that can be issue.Once faced ,not quite sure.Also can you just make your command like
BACKUP DATABASE [MyDb]
TO DISK = 'D:\Domains\SQL_Backup\DB\myDb\Mydb_FullBackup_20140305_1100.bak'
WITH NOFORMAT, NOINIT, STATS = 10
GO
Just a simple one .Is backup failing immediately or after some time .Error is not so helpful as it does not shows any information
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

BACKUP failed to complete the command BACKUP LOG

Getting BACKUP failed to complete the command BACKUP LOG qoemetrics for our Lync Server 2013 SQL 2012 mirror. No backups defined on mirror. Any ideas?

BACKUP DATABASE [rtcxds] TO DISK = N'B:\Backups\rtcxds_backup_2014_01_22_085201_7525216.bak' WITH NOFORMAT, NOINIT, NAME = N'rtcxds_backup_2014_01_22_085201_7525216', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [rtcshared] TO DISK = N'B:\Backups\rtcshared_backup_2014_01_22_085201_7575240.bak' WITH NOFORMAT, NOINIT, NAME = N'rtcshared_backup_2014_01_22_085201_7575240', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [rtcab] TO DISK = N'B:\Backups\rtcab_backup_2014_01_22_085201_7625117.bak' WITH NOFORMAT, NOINIT, NAME = N'rtcab_backup_2014_01_22_085201_7625117', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [rgsconfig] TO DISK = N'B:\Backups\rgsconfig_backup_2014_01_22_085201_7665100.bak' WITH NOFORMAT, NOINIT, NAME = N'rgsconfig_backup_2014_01_22_085201_7665100', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [rgsdyn] TO DISK = N'B:\Backups\rgsdyn_backup_2014_01_22_085201_8005299.bak' WITH NOFORMAT, NOINIT, NAME = N'rgsdyn_backup_2014_01_22_085201_8005299', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [cpsdyn] TO DISK = N'B:\Backups\cpsdyn_backup_2014_01_22_085201_8045296.bak' WITH NOFORMAT, NOINIT, NAME = N'cpsdyn_backup_2014_01_22_085201_8045296', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [xds] TO DISK = N'B:\Backups\xds_backup_2014_01_22_085201_8095321.bak' WITH NOFORMAT, NOINIT, NAME = N'xds_backup_2014_01_22_085201_8095321', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [lis] TO DISK = N'B:\Backups\lis_backup_2014_01_22_085201_8135340.bak' WITH NOFORMAT, NOINIT, NAME = N'lis_backup_2014_01_22_085201_8135340', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [mgc] TO DISK = N'B:\Backups\mgc_backup_2014_01_22_085201_8185450.bak' WITH NOFORMAT, NOINIT, NAME = N'mgc_backup_2014_01_22_085201_8185450', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [LcsCDR] TO DISK = N'B:\Backups\LcsCDR_backup_2014_01_22_085201_8225412.bak' WITH NOFORMAT, NOINIT, NAME = N'LcsCDR_backup_2014_01_22_085201_8225412', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [QoEMetrics] TO DISK = N'B:\Backups\QoEMetrics_backup_2014_01_22_085201_8265396.bak' WITH NOFORMAT, NOINIT, NAME = N'QoEMetrics_backup_2014_01_22_085201_8265396', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [ReportServer] TO DISK = N'B:\Backups\ReportServer_backup_2014_01_22_085201_8315433.bak' WITH NOFORMAT, NOINIT, NAME = N'ReportServer_backup_2014_01_22_085201_8315433', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [ReportServerTempDB] TO DISK = N'B:\Backups\ReportServerTempDB_backup_2014_01_22_085201_8355531.bak' WITH NOFORMAT, NOINIT, NAME = N'ReportServerTempDB_backup_2014_01_22_085201_8355531', SKIP, REWIND, NOUNLOAD, STATS = 10

Bridge update freezes at 12% and fails to complete the update process why?

The new update release for Bridge fail to complete it stops at 12% and will not finish. Does anyone know why the update will not install?

What specific update are you installing? Do you receive any specific error messsages? If not then you can check your install log for the source of your difficulties. You can find details on how to locate and interpret your installation log at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

App Store Logic fails to complete the download of additional content.

Hi All just picked up Logic form the app store for my new mac and it keeps failing to download the additional content. Has anyone had this problem and found a solution?
Thanks in advance

Your best bet is to call Apple, this has happened to many users so they have a database of download errors.

HT4009 I make an In-App purchase and my device fails to complete the purchase. Could you do something about it and prevent it from ever happening again?

To iTunes Store
I've being trying to make an In-App purchase and it doesn't work. I get this message that says the pruchase can't be completed. Could you do something about it and prevent it from ever happening again?
Sincerely
Cameron

We are itunes users just like you.
You should contact itunes support

I tried updating to the latest version of Firefox. When I dragged the icon to 'applications', it failed to complete the process. I'm running Mac OS 10.5.8

Details are included in question.

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

HP Officejet 7310xi All-in-one driver always fail to complete the download on brand new computer

I just go my computer a few weeks ago. It has windows 7. I have added very little to it yet. I have tried on numerous occasions to download the drivers for our printer. I did attempt to use the cd that came with it, but that was for earlier operating systems. What can I do to get this to download? I really need my printer.
This question was solved.
View Solution.

HI,
You should use the Print Install Wizard from method one in this document. It should walk you through the install
Print Install Wizard
Click the + to expand the section in method one and follow the instructions in the Print Install Wizard.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

"Load files into Photoshop layers" fails to complete CS6

Hi all,
Hoping someone can help with the folling problem with Photoshop & Bridge CS6
When in Bridge, after selecting 6 images (CR2) using the command TOOLS>LOAD FILES INTO PHOTOSHOP LAYERS the first file will load into Photoshop, Photoshop will then generate a second blank layer and then read the second file. At this point the "script" will stop. I am left with a document with 2 layers. The top layer has my first image, the bottom layer is empty.
At this point when I quit Photoshop I am prompted to save this open document which appears to be the only open document. I choose not to save this as a file. I then get a dialogue box prompting to save another open document. Photoshop has loaded the second file to place as a layer but as the "script" has aborted I am left with an open, but invisible file.
When I first loaded CS6 on Snow Leopard, it would demonstrate this behaviour every time I attempted to run this command from Bridge.
I did a clean install on a blank HDD of OSX Lion. Installed CS6. The command worked without fail for about a month.
Then I would get the command aborting occasionally. Restarting Photoshop would let me continue for a few hours before this aborted script problem would happen again.
Over the last week it has become more frequent, to a point where this workflow is unusable.
A restart of Photoshop may fix the problem for the next batch of images, only to fail again soon after, or fail on the first attempt after a relaunch of Photoshop.
A reboot of my computer will allow my to load one or two sets of files before again failing to complete the command.
I have tried the following:
In Photoshop preferences:
disabling the "Use graphics Processor"
Increasing or decreasing the amount of RAM available to Photoshop
Changing the cache levels or changing the cache tile size
changing the scratch disk
Trashing the Photoshop preferences file (Photoshop Settings.psp)
In Bridge
Purging the cache
Increasing or decreasing the cache size
Resetting Bridge preferences (holding Command on launch) and deleting all cache files.
In general system
Quitting extra programs (Safari, Thunderbird, iTunes)
Sometimes this will seem to then allow Photoshop to load a full set of images, only to abort again after a few sets.
Rebooting the computer - again will work for a few images sets before again failing.
Now the fact that it worked fine for several weeks without presenting a problem would indicate that it is not a bug.
The fact that is slowly started happening then became more frequent would indicate something changing slowly over time - a larger cache folder perhaps, although purging known Bridge cache folders has not filed the problem.
Really at the end of my tether here. Even considering downgrading to CS5 - but don't want to have to use the older Adobe Camera Raw.
System is as follows:
Mac Pro 2 x 2.66 Quad Core
24GB RAM
ATI Radeon HD 4870 512
OSX Lion 10.7.4
I have seen a couple of others have posted having a the same problem, both with CS5 and CS6.
Hoping someone has an answer.
Thanks.

Hi JJMack - I just re-read your post. For some reason I thought you were suggesting to make sure "Open documents in Tabs" was selected, it was. Now I realize you were suggesting to turn it off! As another attemp to solve this problem I did de-select it today. Seemed to work for a good while. I was getting very excited, then, on the last set of images I had to do it displayed the same problem. But, it did go for quite a while without failing, and when it did I was thrashing about trying to make another app active. When loading documents like this - with "Open documents in Tabs" de-selected, Photoshop wants to put the loading images as the front-most window, no matter what other apps (Bridge, email, web etc) I click on in the dock. I think it is related to the bug you described effecting the "load files to stack" command.
Hopefully Adobe is looking at this - mind you, I have read reports of people having this problem in CS5! Looks like that was never resolved sadly.
I'll keep testing and post back.
I am looking to upgrade my video card to see if it's a video memory thing.
What is very weird though is the fact that this problem didn't present itself until after several weeks of working with this command with no problem. No additional apps installed, nothing changed. Why would it start happening only after a while?
Thanks again for your suggestion.

Upgrading to iso 5 and receiving error message "the network connection timed out" and won't complete the update. How do I fix to complete the upgrade?

Upgrading to iso 5 and received an error message "the network connection timed out" and fails to complete the upgrade. How do I complete the upgrade?

Try a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

HT204204 update software fails to complete

I have iphone 4s and had iOS 6. Today I tried to install iOS 8. My phone fails to complete the install and is locked up. What should I do?

Hi fifemidwife,
Thank you for using Apple Support Communities.
I understand you are trying to install iOS 8 on your iPhone 4s. The article you were linked from provides two methods to update, updating wirelessly and using iTunes. Did you try both? If you only tried one, try the other. If you still have difficulties, let us know what is happening and we can see what other options are avilable.
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
Regards,
Jeff D.

IPad fails to complete IOS 4.3 update

My iPad failed to complete the IOS 4.3 update. The message in iTunes said the iPad needs to be restored, but the restore fails to complete. I tried a different cable and USB port on my iMac. I charged my iPad for a few hours and tried it again. My iTunes is version 10.2.1. This is a iPad 1 (Wifi version).
iTunes runs through the restore process until it says "restoring iPad software" and almost completes the install. The restore completes until about 90% or so of the way and just hangs up.
Any help would be appreciated.

I had the same problem and called Apple. Here's what we did: I held down both the Home button and the Sleep button at the same time until the iPad rebooted. Then the iPad screen changed to the iTunes icon and a USB cord. When I opened iTunes, I could now see the iPad (previously it hadn't shown up) and got an error message. The Apple tech said I would need to restore the factory settings. I did and it took a while since my iPad is loaded with aps and music, but it all came back since it was backed up on my Mac.
Good luck! They are hearing from a lot of people with this (but I'm the only one I know with an iPad who had the issue) and didn't charge me--I don't have the extended care plan.

4630 Scan Failed to complete error - OS X Yosemite

I bought the 4630 about a month ago and have tried scanning on 3 different Macs running OSX 10.10.1. The first scan after initial set up works. After that, I get either "The overview scan failed to complete" if the Details window is open or "The scanner failed to complete the scan" if the Details window is hidden. I've tried re-installing the 4630 dozens of times. I just downloaded the last HP software for it. Please help.

Hello @JohnGillen , and thanks for posting on the HP Forums!
I can see you're experiencing scan issues. I'd love to help with that!
I have a few steps I'd recommend:
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the printer: HP Officejet 4630 e-All-in-One Printer series Full Feature Software and Drivers.
Good luck and please let me know how it goes!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

MDSModelDeploy Operation Failed, clone cannot be deployed, The Attribute Value is not valid

I've created a model containing a customer entity with various domain based attributes. I've populated the entities via a combination of manual entry and the staging tables. In the source system I have approx 950 customer records, all of which
fail validation on the source system as some of the attributes will be maintained only in MDS and are not in the source systems I'm pulling the initial data from.
I ran the MDSModelDeploy.exe to create a package containing data on the source system. I then ran the package to apply the package using the -deployclone option on my target system. I piped the output into a flat file for review.
Here is the error I'm receiving.
MDSModelDeploy operation failed. Elapsed time: 00:01:00.2314612
Error:
A clone of the "Subzero_1" model cannot be deployed.
An error occurred while processing message request type 'EntityMembersMergeRequest'. See exception details for more information.
Package deployment failed with 344 errors
The attribute value is not valid.
The attribute value is not valid.   (repeated 344 times)
Any ideas what the issue might be? I have tried verbose logging as well and did not find anything that would point me in the direction of the problem. The end result was that the model was not deployed to the target.
I have also created a package without data, deployed that, then applied the data. This gets the model to the target and the data also appears to be there but I did receive this error on the deployupdate.
This is on SQL Server 2012.

I am seeing the same error. Created a model, Cloned the model. Made changes to the clone (Schema and Data), and used MDSModelDeploy UpdateModel to update the primary (not cloned) model. In looking at the log, I see the error shown below, but I do not
see anything that points to what was happening at the time.
I tried running a SQL trace to see if one of the SQL commands received an error, but none of the commands did.
In looking at the model that was updated, I can see all of the schema changes were made, and most of the data was updated. There is one table that did not update completely. The attributes in the table consist of Domain Specific and text attributes only.
I also verified that everything on both models was validated before starting.
In the weblog I see the error listed below, but there is nothing in the data that would match that value
Not sure were to go from here....
Chad
--- MDSMODELDEPLOY ERROR RECEIVED ---
MDS Error: 0 : Microsoft.MasterDataServices.WebUI.ServiceAdapterObjectInvalidException: An error occurred while processing message request type 'EntityMembersMergeRequest'. See exception details for more information.
   at Microsoft.MasterDataServices.WebUI.ServiceAdapter.InspectResponseForErrors(MessageRequest request, MessageResponse response)
   at Microsoft.MasterDataServices.WebUI.ServiceAdapter.ExecuteRequest[TRequestType,TResponseType](MdmServiceOperation`2 operation, TRequestType request)
   at Microsoft.MasterDataServices.WebUI.ServiceAdapter.DoEntityMembersMerge(EntityMembers entityMembers)
   at Microsoft.MasterDataServices.Deployment.ModelDeployer.BatchEntityMembersMerge(Collection`1 masterData, Boolean membersOnly, Int32 batchSize, Int32 totalBatches, Collection`1 errors)
   at Microsoft.MasterDataServices.Deployment.ModelDeployer.UpdateData(Collection`1 masterData, Warnings errorsAsWarnings)
   at Microsoft.MasterDataServices.Deployment.ModelDeployer.DeployUpdate(Package package, Boolean includeData, Identifier targetVersionId)
   at Microsoft.MasterDataServices.Deployment.Utility.ModelDeploy.DeployUpdate(String serviceName, String packageFile, String versionName)
   at Microsoft.MasterDataServices.Deployment.Utility.ModelDeploy.Main(String[] args)
    DateTime=2014-02-06T16:03:17.8405277Z
-- WEB ERROR RECEIVED --
MDS Verbose: 0 : Unable to convert value of query string parameter Id = VID to an integer
    DateTime=2014-02-06T17:18:00.7367274Z

The Deploy Software Updates Wizard completed with errors - Access is Denied

Hello, I am trying to download some updates that were synced up to the SCCM's database from another WSUS server. I am not able to get it done because the wizard fails with the access is denied error. I checked patchdownloader.log file and saw Error code
= 5 which means access denied. I tried to change permissions on the "updateservicespackages" folder within the folder, and I have full NTFS permissions for system, administrators, and read only permissions for everyone. Same thing goes for
the share permissions. My account is in the administrators group. The only way I can get it to work is by granting full permissions to "everyone", but that cannot be security friendly. Which account is "Deploy Software Updates Wizard" using
so that I can properly give it the required rights?

Hi,
You could have a look at the thread below. Lucas used ProcMon that shows an access denied with the user which he was using. Permission via group wasn't enough. Give your user full share/security access and everything works fine.
https://social.technet.microsoft.com/Forums/en-US/99859604-a803-43f3-a172-159a500fcb90/the-deploy-software-updates-wizard-completed-with-errors-access-is-denied?forum=configmgrsum
Best Regards,
Joyce

Failed to complete the deployment

Similar Messages

Maybe you are looking for