Failed to get DHCP response on interface "Marking interface dirty"
Dears
i have WLC 5508 showing the below Logs , which prevent the users from connecting to the SSIDs , also its disconnecting the associted users
DHCP Socket Task: Jul 11 09:54:08.992: %SIM-3-DHCP_SERVER_NO_REPLY: sim_interface.c:1039 Failed to get DHCP response on interface 'interface-02'. Marking interface dirty.
*mmListen: Jul 11 09:54:08.638: %MM-3-INVALID_PKT_RECVD: mm_listen.c:7671 Received an invalid packet from 10.21.1.25. Source member:0.0.0.0. source member unknown.
it shows 3 to 4 times durring 1 hour ,
any idea about the problem , and what exactly Dirty interface means ??
looks like you could be using interface group.
(WLC) >show interface group detailed
Interface marked with * indicates DHCP dirty interface.
whenever the existing interface goes dirty does the client tries the next available interface for dhcp.
The idea of Interface Groups is that you can have a WLAN utilize multiple interfaces/VLANs/Subnets/DHCP Pools, either for load balancing. At its heart it is purely round robin or based on hash generated using mac address(it depends on the wlc code), but should a client connect in on a certain interface and not be able to complete the DHCP process we mark it as dirty for 30 minutes. During those 30 minutes we basically remove that Interface from the Interface Group as it won't be selected for use.
Similar Messages
-
Error: Failed to get a response after sending the message
This is another one of those errors I only get some of the time with a specific script. I can't figure a rhyme or reason for it. The full error is:
Failed to get a response after sending the message: <Message name="PageComplete"><Parameter WindowIndex="0"></Parameter><Parameter PassIfPageAlreadyComplete="false"></Parameter></Message>.
It's triggering at a WaitForPage() method in the script. The script is executing from the OTM server which is Windows Server 2008 R2 and only runs for OTM. No roles or features (other than SMTP). IE-ESC is off for all users. The script runs with -delayPercentage 1.
The script runs fine from within OpenScript workbench every time. The script does work when executed from OTM, however it will sometimes fail. When I run the scripts back to back the failure rate is about 50%. Same error every time....
Any help, insight, and ideas would be greatly appreciated.
Edited by: Colyn1337 on Mar 14, 2013 11:20 AMAlso, some time it throw slightly different error like:
"/web:window[@index='0']/web:document[@index='2']/web:form[@index='1']/web:inp
ut_text[@id='saw_*' or @index='1']" failed to respond to action: <Message
name="Click"><Parameter WindowIndex="0"></Parameter><Parameter
DocumentIndex="2"></Parameter><Parameter index="1"></Parameter><Parameter
tag="INPUT"></Parameter><Parameter type="text"></Parameter></Message>.
Please help to triage. -
AEX fails to get DHCP address, but works on DLink
Sorry for the long post -- I'm hoping the details will help you diagnose the problem faster in the long run.
My DLink router gets a DHCP IP address from the (Comcast) cable modem, but when I switch to the AirPort Extreme (5th gen, refurbished), it doesn't. It shows an autoconfiguration IP address of the 169.254 variety, suggesting that DHCP isn't working for the AEX. (Just fyi, my girlfriend's macbook can connect to the AEX and get 10.0.1.x IP addresses; I can ping the AEX over wifi.)
Airport Utiltiy shows a red number 2 with a single error indicating Internet failure to get IP address or something. The suggested solution is power-cycling the modem; failing that, contact the ISP. Contacting Comcast was amusing but useless...they gave me instructions for setting up AEX with a DSL modem -- twice -- without understanding my objection!
The AEX is configured for DHCP (not Static or PPPoE), and uses all stock settings (I did both a soft reset and used the Airport Utility to restore default settings...not sure if those two are the same).
I've tried power-cycling the router and cable modem numerous times, including leaving them off for 15+ minutes and leaving the AEX connected for 6+ hours. I tried using the DLink to release the DHCP reservation and then quickly switching the cable over to the AEX.
I read somewhere that resetting the "CMTS (cable modem termination system)" might help. I mentioned it to the Comcast tech support, but they didn't respond.
At this point, I'm not sure what else to try. It could be the refurbished unit is broken, but 95% of the time these sorts of things are configuration issues. (I know a fair amount about networking, but I'm new to Apple products so I could be doing something stupid.) I may try connecting the AEX to the LAN side of the DLink to see if it can get a DHCP address from that...but I'm clearly grasping at straws.
<whimpers>...Help?Update: The AEX does get a DHCP address when connected to the LAN side of the DLink gateway. (But the AEX doesn't get one when connected directly to the cable modem. Yet the DLink gets a DHCP address when connected to the cable modem.) So...??!?!!!
-
Hi all,
I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
<snip>
11/05/14 08:50:48:184 | [INFO] | | | | | | | 5236 | **File download complete.**
11/05/14 08:50:52:145 | [INFO] | | | | | | | 3732 | **File download complete.**
11/05/14 08:51:05:327 | [INFO] | | | | | | | 1784 | **File download complete.**
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | The windows error code is - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | Failed to send the request to server to get the response - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
11/05/14 08:51:06:992 | [INFO] | | | | | | | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:51:11:514 | [INFO] | | | | | | | 6844 | incrementing the thread. now the active thread count is 2
11/05/14 08:51:12:519 | [INFO] | | | | | | | 6648 | **File download complete.**
11/05/14 08:51:16:541 | [INFO] | | | | | | | 6844 | decrementing the thread count. now the active thread count is 1
11/05/14 08:51:22:281 | [INFO] | | | | | | | 3452 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:51:29:022 | [INFO] | | | | | | | 1836 | **File download complete.**
11/05/14 08:52:22:381 | [INFO] | | | | | | | 7220 | incrementing the thread. now the active thread count is 2
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | The windows error code is - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | Failed to send the request to server to get the response - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
11/05/14 08:52:27:383 | [INFO] | | | | | | | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:52:27:663 | [INFO] | | | | | | | 4908 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:52:28:733 | [INFO] | | | | | | | 6064 | **File download complete.**
11/05/14 08:52:42:810 | [INFO] | | | | | | | 7220 | **File download complete.**
11/05/14 08:52:45:570 | [INFO] | | | | | | | 3788 | **File download complete.**
</snip>
There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.Hi all,
I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
<snip>
11/05/14 08:50:48:184 | [INFO] | | | | | | | 5236 | **File download complete.**
11/05/14 08:50:52:145 | [INFO] | | | | | | | 3732 | **File download complete.**
11/05/14 08:51:05:327 | [INFO] | | | | | | | 1784 | **File download complete.**
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | The windows error code is - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | Failed to send the request to server to get the response - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
11/05/14 08:51:06:992 | [INFO] | | | | | | | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:51:11:514 | [INFO] | | | | | | | 6844 | incrementing the thread. now the active thread count is 2
11/05/14 08:51:12:519 | [INFO] | | | | | | | 6648 | **File download complete.**
11/05/14 08:51:16:541 | [INFO] | | | | | | | 6844 | decrementing the thread count. now the active thread count is 1
11/05/14 08:51:22:281 | [INFO] | | | | | | | 3452 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:51:29:022 | [INFO] | | | | | | | 1836 | **File download complete.**
11/05/14 08:52:22:381 | [INFO] | | | | | | | 7220 | incrementing the thread. now the active thread count is 2
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | The windows error code is - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | Failed to send the request to server to get the response - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
11/05/14 08:52:27:383 | [INFO] | | | | | | | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:52:27:663 | [INFO] | | | | | | | 4908 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:52:28:733 | [INFO] | | | | | | | 6064 | **File download complete.**
11/05/14 08:52:42:810 | [INFO] | | | | | | | 7220 | **File download complete.**
11/05/14 08:52:45:570 | [INFO] | | | | | | | 3788 | **File download complete.**
</snip>
There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0. -
What do I have to do when I get a response that connection to server failed?
What do I have to do when I get a response that connection to server failed?
Thanks for this Gary. Much appreciated. Will help with future ones.
Still a bit like using keynote in 'safe mode' and very limiting.
If anyone produces an 'auto convert' app that will save me the work of fixing existing presentations slide by slide, I'm buying it :-)
Thanks again -
[SOLVED] Can't get DHCP to work with wifi
On my recent install my wireless connection won't work with DHCP. If I use static IP I can associate with my AP and all is well but with DHCP wicd-gtk goes through the connection process and then just says "Not Connected". Any ideas?
Last edited by ill (2013-01-22 01:18:28)ill wrote:I don't believe that's the issue. wicd successfully autodetected the interfaces... plus if it had the wrong interface I don't think using static IPs would fix the problem.
Have you tried connecting manually with wpa-supplicant?
The wiki says this
If wicd repeatedly fails to get an IP address using the default dhcpcd client, try installing and using dhclient instead:
# pacman -S dhclient
I'd try manually with wpa-supplicant and if that works try the new dhcp client -
How to send data to another site, get response, redirect and get new response
Dear all,
I've to write a Java EE application that have to become an interface to a payment platform. The protocol require to send a POST string containing some information (including an error and response page) to an external host, get the response and redirect the user to another host using the previous response. When the user ends the transaction the host redirect the user to my error or response page.
For the moment my user access to my application using glassfish REALM authentication. After that I write the following code:
public void paymentPrepare() throws UnsupportedEncodingException, IOException {
String postUrl = "https://test.payment.test/init/http";
HttpPost postRequest = new HttpPost(postUrl);
String id = "99999999";
String password = "99999999";
String action = "4";
String amt = "1.00";
String currencycode = "978";
String langid = "ENG";
String responseurl = "http://myhost:8080/EMBOWorkshop/secure/response.xhtml";
String errorurl = "http://myhost:8080/EMBOWorkshop/secure/error.xhtml";
trackid = "TRCK0001";
udf1 = "Descrizione";
StringEntity postParamsEntity = new StringEntity("id=" + id
+ "&password=" + password
+ "&action=" + action
+ "&amt=" + amt
+ "¤cycode=" + currencycode
+ "&langid=" + langid
+ "&responseurl=" + responseurl
+ "&errorurl" + errorurl
+ "&trackid" + trackid
+ "&udf1" + udf1);
postParamsEntity.setContentType("application/x-www-form-urlencoded");
postRequest.setEntity(postParamsEntity);
DefaultHttpClient httpClient = new DefaultHttpClient();
// Execute the HTTP POST
System.out.println("Executing HTTP Post...\n");
HttpResponse response = httpClient.execute(postRequest);
// Check the HTTP status of the post.
if (response.getStatusLine().getStatusCode() != 200 && response.getStatusLine().getStatusCode() != 201) {
throw new RuntimeException("Failed: HTTP error code: "
+ response.getStatusLine().getStatusCode());
// Create a reader to read in the HTTP post results.
BufferedReader br = new BufferedReader(
new InputStreamReader((response.getEntity().getContent())));
// Read in all of the post results into a String.
String output = "";
Boolean keepGoing = true;
while (keepGoing) {
String currentLine = br.readLine();
if (currentLine ==
null) {
keepGoing = false;
} else {
output += currentLine;
System.out.println("Raw string result: \n" + output);
The previous code works fine. I receive the response. But now I don't know how to continue. How can redirect the user to another site, and when the payment is finished, receive the response? Another question is, the user authenticate himself to access to the application. When the user will redirect to an external site, the glassfish session permits to get the response from the other host without require a new authentication?
For the moment I don't know how to redirect the user, but I tried to write this method to obtain the last response:
public void getResponse(HttpServletRequest request, HttpServletResponse response) {
paymentId = request.getParameter("paymentid");
result = request.getParameter("result");
auth = request.getParameter("auth");
ref = request.getParameter("ref");
traind = request.getParameter("tranid");
trackid = request.getParameter("trackid");
udf1 = request.getParameter("udf1");
responsecode = request.getParameter("responsecode");
Is it correct?
ThanksNow I'm able to redirect the user to the other page:
ExternalContext externalContext = FacesContext.getCurrentInstance().getExternalContext();
externalContext.redirect("http://stackoverflow.com");
Now the problem is: once the user has finished to pay, the other site redirect the user to my site using one of the two JSF page I prepared for error or response like the following:
<?xml version='1.0' encoding='UTF-8' ?>
<!DOCTYPE composition PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<ui:composition xmlns:ui="http://java.sun.com/jsf/facelets"
template="./index.xhtml"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:rich="http://richfaces.org/rich"
xmlns:a4j="http://richfaces.org/a4j"
xmlns="http://www.w3.org/1999/xhtml"
xmlns:fn="http://java.sun.com/jsp/jstl/functions"
>
<ui:define name="content">
<center>
An error occurred during transaction
#{participantBean.auth}<br />
#{participantBean.responsecode}
</center>
</ui:define>
</ui:composition>
So, how can I get the GET parameters that the other host sent to me during the redirection? -
RFC to JDBC Sync Scenario and get JDBC response
Hi All,
We need to create RFC to JDBC synchronous interface with update_insert action.
And we need to get the number of records updated or inserted as response and map the response and send it back to ECC as RFC response mesg.
I have gone through the help document on JDBC and it says :
The response document has the following format; one of the two values is always 0 because either an UPDATE or an INSERT action is always executed:
<update_count>count</update_count>
<insert_count>count</insert_count>
Now following is the question: Is this this the standard feature? Because in our case Database side they will not be sending any response back.
So with the synchronous receiver JDBC channel would we get this update and insert count as response by default?.
Please help with replies.
Thanks,
JaneHi Jane
No setting needs to be done by the Database team, it is a standard feature.
Whenever you insert or update records in DB using the JDBC Adapter, you will get the response with the count.
If insertion fails due to some reason in JDBC Adapter, then there will be no response.
Regards
Osman -
Clients not getting DHCP in VRF
Good morning -
We have devices in the global routing table (not in a VRF) getting DHCP addresses without issue. The SVI is configured as such:
interface Vlan2301
description BLUE
ip address 172.19.68.1 255.255.255.0
ip helper-address 10.4.16.222
interface Vlan2512
description RED
vrf forwarding RED
ip address 10.217.5.1 255.255.255.0
ip helper-address 10.4.16.222
Clients in BLUE are getting DHCP but clients in RED are not. If I statically assign an address I have connectivity and can reach the DHCP server (which is also DNS server; with a static IP in VLAN 2512 I can do name resolutions for example).
I am at a bit of a loss. Is there anything special I need to do for VRF IP HELPER-ADDRESS configuration? A capture on my firewall interface shows the DHCP server is trying to reply - it is like the helper-address is not forwarding the dhcp reply (or is not getting it)
11:11:52.915180 IP (tos 0x0, ttl 254, id 17478, offset 0, flags [none], proto UDP (17), length 337)
10.217.5.1.67 > 10.4.16.222.67: BOOTP/DHCP, Request from xx, length 309, hops 1, xid 0xb53a220c, Flags [none]
Gateway-IP 10.217.5.1
Client-Ethernet-Address xx [|bootp]
11:11:52.918761 IP (tos 0x0, ttl 124, id 28096, offset 0, flags [none], proto UDP (17), length 344)
10.4.16.222.67 > 10.217.5.1.67: BOOTP/DHCP, Reply, length 316, xid 0xb53a220c, Flags [none]
Your-IP 10.217.5.12
Server-IP 10.4.16.222
Gateway-IP 10.217.5.1
Client-Ethernet-Address xx [|bootp]
Any ideas?Good morning -
I have a pair of 6513 in a VS40 (VSS quad sup) connected via L3 MEC to a VSS pair of 4500X. Active to Active and Standby to Standby connected in a L3 MEC port-channel that is also a vnet trunk:
(Core)
interface Port-channel5
description Distribution Uplink
no switchport
vnet trunk
ip dhcp snooping limit rate 100
ip address 172.20.68.1 255.255.255.252
ip ospf message-digest-key 1 md5 XXX
spanning-tree guard root
(4500 Distribution)
interface Port-channel1
description Core Uplink
vnet trunk
ip arp inspection trust
ip address 172.20.68.2 255.255.255.252
ip ospf message-digest-key 1 md5 XXX
The interfaces are all using LACP mode Active inside the channels
On the 4500 we have a global routing table and a vrf. Both have helper addresses pointing to the DHCP server which is extranet service behind the 6513 Core.
interface Vlan2301
description Global Routing Table
ip address 172.19.68.1 255.255.255.0
ip helper-address 10.4.16.222
interface Vlan2512
description VRF
vrf forwarding RED
ip address 10.217.5.1 255.255.255.0
ip helper-address 10.4.16.222
DHCP for the Global Routing Table subnet works. DHCP for the VRF does not.
What is interesting is if we shut down the link that is connected to the standby 4500 (Te2/1/1) DHCP starts to work for the VRF.
Using <debug ip dhcp server packet detail> at the 4500 here is what I am seeing.
When both links are up and DHCP is failing for the VRF:
Mar 10 20:02:02.419: DHCPD: BOOTREQUEST from 0100.1a6b.3a56.13 forwarded to 10.4.16.222.
Mar 10 20:02:10.473: DHCPD: Reload workspace interface Vlan2512 tableid 3.
Mar 10 20:02:10.473: DHCPD: tableid for 10.217.5.1 on Vlan2512 is 3
Mar 10 20:02:10.474: DHCPD: client's VPN is RED.
Mar 10 20:02:10.474: DHCPD: using received relay info.
When I shut the Te2/1/1 link down in the L3 MEC at the 4500 DHCP starts to work for the VRF RED:
Mar 10 20:04:41.354: DHCPD: BOOTREQUEST from 0100.1a6b.3a56.13 forwarded to 10.4.16.222.
Mar 10 20:04:41.369: DHCPD: Reload workspace interface Port-channel1.2002 tableid 3.
Mar 10 20:04:41.369: DHCPD: tableid for 172.20.68.2 on Port-channel1.2002 is 3
Mar 10 20:04:41.369: DHCPD: client's VPN is .
Mar 10 20:04:41.369: DHCPD: forwarding BOOTREPLY to client 001a.6b3a.5613.
Mar 10 20:04:41.369: DHCPD: no option 125
Mar 10 20:04:41.369: DHCPD: broadcasting BOOTREPLY to client 001a.6b3a.5613.
Mar 10 20:04:41.369: DHCPD: no option 125
Mar 10 20:04:44.808: DHCPD: Reload workspace interface Vlan2512 tableid 3.
Mar 10 20:04:44.808: DHCPD: tableid for 10.217.5.1 on Vlan2512 is 3
Mar 10 20:04:44.808: DHCPD: client's VPN is RED.
It is like there is a bug that is treating the L3 MEC as a L2 MEC when both links are present; or the VNET trunk is not being processed correctly.
Has anyone else used a L3 MEC with a VRF and a DHCP helper with success? Is this a bug?
03.05.01.E is the code we are running on the 4500X-32(SPF+)
This is also with TAC but I thought I would share with the community in case anyone else has a similar environment or if Cisco experts want to comment. -
KMS client activation failed, but got server response?
I've been using KMS for several years. Generally there are no problems with KMS, but I have a single machine that is refusing to activate, and I cannot determine why. I've been doing extensive web searching but I'm not finding anything useful.
Windows 7 Pro client is using the Windows 7 Pro KMS client key GPDD4 as usual.
KMS Server is in Windows 2008 R2
The event log says the client is getting a response from KMS server (see below).
============================
Server: slmgr /dlv
Name: Windows Server(R), ServerStandard edition
Description: Windows Operating System - Windows Server(R), VOLUME_KMS_R2_B channel
Partial Product Key: 7GCM2
License Status: Licensed
Key Management Service is enabled on this machine
Current count: 50
Listening on Port: 1688
DNS publishing enabled
KMS priority: Normal
Key Management Service cumulative requests received from clients
Total requests received: 444
Failed requests received: 297
Requests with License Status Unlicensed: 0
Requests with License Status Licensed: 86
Requests with License Status Initial grace period: 12
Requests with License Status License expired or Hardware out of tolerance: 2
Requests with License Status Non-genuine grace period: 0
Requests with License Status Notification: 47
===============================
Client ability to find KMS Server:
C:\Users\foo>nslookup -type=srv _vlmcs._tcp
Server: UnKnown
Address: 172.20.0.8
_vlmcs._tcp.XXXXXXXXXXXX SRV service location:
priority = 0
weight = 0
port = 1688
svr hostname = dc3.XXXXXXXXXXX
dc3.XXXXXXXXX internet address = 172.20.0.11
===============================
Client: slmgr /dlv
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Professional edition
Description: Windows Operating System - Windows(R) 7, VOLUME_KMSCLIENT channel
Activation ID: b92e9980-b9d5-4821-9c94-140f632f6312
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00170-868-000000-03-1033-7601.0000-2092014
Installation ID: 011751536521019726056115618440708701492313365893152065
Partial Product Key: GPDD4
License Status: Initial grace period
Time remaining: 43200 minute(s) (30 day(s))
Remaining Windows rearm count: 1
Trusted time: 7/28/2014 9:36:41 AM
Please use slmgr.vbs /ato to activate and update KMS client information in order to update values.
=========================
Client: slmgr /ato
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Activating Windows(R) 7, Professional edition (b92e9980-b9d5-4821-9c94-140f632f6312) ...
Error: Product activation failed.
=========================
Client: Application Event log
Security-SPP Event ID 12288
The client has sent an activation request to the key management service machine.
Info:
0x00000000, 0x00000000, dc3.XXXXXXXXXX:1688, 637b796e-5348-4ce1-b0b5-4d750e9d471e, 2014/07/28 14:43, 0, 2, 43200, b92e9980-b9d5-4821-9c94-140f632f6312, 25
Security-SPP Event ID 12289
The client has processed an activation response from the key management service machine.
Info:
0x00000000, 0x00000000, 1, 0, 50, 120, 10080, 2014/07/28 14:43
Security-SPP Event ID 1033
These policies are being excluded since they are only defined with override-only attribute.
Policy Names=(IIS-W3SVC-MaxConcurrentRequests) (Microsoft.Windows.Smc-Enabled) (Shell-InBoxGames-FreeCell-EnableGame) (Shell-InBoxGames-Hearts-EnableGame) (Shell-InBoxGames-Minesweeper-EnableGame) (Shell-InBoxGames-PurblePlace-EnableGame) (Shell-InBoxGames-Shanghai-EnableGame)
(Shell-InBoxGames-Solitaire-EnableGame) (Shell-InBoxGames-SpiderSolitaire-EnableGame) (Shell-MultiplayerInboxGames-Backgammon-EnableGame) (Shell-MultiplayerInboxGames-Checkers-EnableGame) (Shell-MultiplayerInboxGames-Spades-EnableGame) (Shell-PremiumInBoxGames-Chess-EnableGame)
(Telnet-Client-EnableTelnetClient) (Telnet-Server-EnableTelnetServer) (TiffIFilterLicensing-EnableTiffIFilter) (WindowsAnytimeUpgrade-CanUpgrade)
App Id=55c92734-d682-4d71-983e-d6ec3f16059f
Sku Id=b92e9980-b9d5-4821-9c94-140f632f6312
Security-SPP Event ID 1003
The Software Protection service has completed licensing status check.
Application Id=55c92734-d682-4d71-983e-d6ec3f16059f
Licensing Status=
1: 4de78642-0f7f-4b61-9392-8add86d70ae8, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
2: 50e329f7-a5fa-46b2-85fd-f224e5da7764, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
3: 5a79ecd8-d33f-406c-a619-7785899b5d59, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
4: 770bc271-8dc1-467d-b574-73cbacbeccd1, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
5: 90a61a0d-0b76-4bf1-a8b8-89061855a4c9, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
6: 92f9d22a-65f5-49a7-90fe-06491b4fc379, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
7: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
8: 9ccffaf9-86a2-414e-b031-b2f777720e90, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
9: b92e9980-b9d5-4821-9c94-140f632f6312, 1, 0 [(0 [0xC004E003, 0, 0], [( 1 0x80070057 30 0 msft:rm/algorithm/volume/1.0 0x00000000 0)(?)( 1 0x80070057 30 0 msft:rm/algorithm/volume/1.0 0x00000000 0)(?)(?)(?)])(1 )(2 [0x00000000, 0, 1], [(?)( 5 0x00000000 30
43200)( 1 0x00000000 0 0 msft:rm/algorithm/flags/1.0 0x00000000 0)(?)(?)(?)])]
10: c1027486-8ae8-4633-9cf9-9658ed80504d, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
11: c1e88de3-96c4-4563-ad7d-775f65b1e670, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
12: c33001fc-5e9c-4f27-8c05-e0154adb0db4, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
13: cf3c5b35-35ff-4c95-9bbd-a188e47ad14c, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
14: cff07cac-7534-4cc3-b3f3-99e1a0aa3c20, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
15: d188820a-cb63-4bad-a9a2-40b843ee23b7, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
16: d8e04254-f9a5-4729-ae86-886de6aa907c, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
17: da22eadd-46dc-4056-a287-f5041c852470, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
18: e120e868-3df2-464a-95a0-b52fa5ada4bf, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
19: e838d943-63ed-4a0b-9fb1-47152908acc9, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
20: 4a8149bb-7d61-49f4-8822-82c7bf88d64b, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
21: afd5f68f-b70f-4000-a21d-28dbc8be8b07, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
Security-SPP Event ID 1003
The Software Protection service has completed licensing status check.
Application Id=55c92734-d682-4d71-983e-d6ec3f16059f
Licensing Status=
1: b92e9980-b9d5-4821-9c94-140f632f6312, 1, 1 [(0 [0xC004E003, 0, 0], [( 1 0x80070057 30 0 msft:rm/algorithm/volume/1.0 0x00000000 0)(?)( 1 0x80070057 30 0 msft:rm/algorithm/volume/1.0 0x00000000 0)(?)(?)(?)])(1 )(2 [0x00000000, 0, 1], [(?)( 5 0x00000000 30
43200)( 1 0x00000000 0 0 msft:rm/algorithm/flags/1.0 0x00000000 0)(?)(?)(?)])]
============================
Client MGA output:
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-J8D7P-XQJJ2-GPDD4
Windows Product Key Hash: xgsndMkYdJsYmUng0qIJ/thx+HI=
Windows Product ID: 00371-868-0000007-85411
Windows Product ID Type: 1
Windows License Type: KMS Client
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {5A310AE8-BFD2-49F1-A8BF-688D339981E8}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.140303-2144
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Professional Plus 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{5A310AE8-BFD2-49F1-A8BF-688D339981E8}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.048</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-GPDD4</PKey><PID>00371-868-0000007-85411</PID><PIDType>1</PIDType><SID>S-1-5-21-3521851180-3244512111-2218252725</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Inspiron 546 </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A09</Version><SMBIOSVersion major="2" minor="5"/><Date>20090808000000.000000+000</Date></BIOS><HWID>095F3D07018400F6</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Central
Standard Time(GMT-06:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>FX09
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0011-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Professional Plus 2007</Name><Ver>12</Ver><Val>1208E0A87E81D86</Val><Hash>FlQRxKwAwaRad03SQZkKxNggIRU=</Hash><Pid>89409-707-0082056-65245</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12"
Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App Id="44" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Professional edition
Description: Windows Operating System - Windows(R) 7, VOLUME_KMSCLIENT channel
Activation ID: b92e9980-b9d5-4821-9c94-140f632f6312
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00170-868-000000-03-1033-7601.0000-2092014
Installation ID: 011751536521019726056115618440708701492313365893152065
Partial Product Key: GPDD4
License Status: Initial grace period
Time remaining: 43200 minute(s) (30 day(s))
Remaining Windows rearm count: 1
Trusted time: 7/28/2014 9:31:36 AM
Please use slmgr.vbs /ato to activate and update KMS client information in order to update values.
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C533
HealthStatus: 0x0000000000000000
Event Time Stamp: 6:23:2014 07:16
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: MgAAAAEABAABAAEAAAACAAAAAQABAAEAJJRe04hAjl+cEVTyEDPMabbK6kXsLQilArQ=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: no, invalid Windows marker
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
ACPI Table Name OEMID Value
OEMTableID Value
APIC DELL
FX09
FACP DELL
FX09
HPET DELL
OEMHPET
MCFG DELL
OEMMCFG
SLIC DELL
FX09
OSFR DELL
FX09
OEMB DELL
FX09
SSDT A M I
POWERNOW
================================
Windows 7 Pro was installed on this machine using Microsoft's volume activation media, and is a standard image applied via Windows Deployment Services to some 200 other computers with no problems.
We also use a variety of surplus/off-lease machines, usually Dell brand, never with any activation problems.It's a Dell Inspiron desktop. Apparently a "for the home" system? Yet it was bought with Win 7 Pro OEM installed, and so I had hoped I could roll it into the KMS easily. Tried updating the BIOS but still acts the same.
How can a "home edition" BIOS that's incompatible with KMS come with Win 7 Pro OEM?
Oddly, we have several Dell XPS systems that are using KMS just fine. Those are almost exclusively marketed as "power gamer" systems for home use. I should see if there's some way to figure out which specific Dell products do this so they can be avoided.
Fortunately it seems Windows 7 Pro edition software does not care if I use the OEM key from the sticker, so I typed that in and it activated.
(Great, one weird machine that has to be treated specially from everything else we've got.)
Probably a question for Dell to answer. For whatever reason, Dell have not performed all the necessary OEM Activation (OA) configuration tasks on this machine, perhaps due to their manufacturing/marketing strategy for this model, or perhaps due to a defective
configuration pass in the factory. Perhaps the mainboard in this machine was repaired or replaced at some stage, and wasn't correctly re-configured. Only Dell can resolve the missing marker, since it requires OEM tools.
Activating using the COA sticker product key, doesn't depend on the marker being present.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
OS Deployment - Failed to get client identity 80004005
Hello all,
Hopefully someone will have a solution to this issue. I've only found one site with a similar problem (http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=2352753&SiteID=17) and the solution was to rebuild the SCCM server, which I have done. Yet the issue persists. After working my way through countless issues with SCCM, this seems to be the only obstacle in my way. Here is the situation:
1. I boot the bare metal client system to PXE and the boot image loads
2. The SCCM status messages appear "Windows is starting up..." and then "Preparing Network Connections..."
3. The client machine hangs for a minute or so, then reboots.
I have enabled the command prompt shell in the boot image and can ping the SCCM server and name resolution work fine, so I know it isn't an issue with the network drivers. Below is the log information from the client. Just as an FYI, the Server is running in "Mixed Mode", so I'm not really understanding the why the identification is an issue. As best I can understand the client is requesting information from the server at a certain point and getting a blank reply.
<![LOG[MP Ports: http=80, https=443, default=80]LOG]!><time="09:20:53.765+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmediawizardcontrol.cpp:551">
<![LOG[Missing root CA environment variable from variables file]LOG]!><time="09:20:53.765+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmediawizardcontrol.cpp:561">
<![LOG[Custom hook from X:\\TSConfig.INI is ]LOG]!><time="09:20:53.765+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmediawizardcontrol.cpp:594">
<![LOG[No custom hook found]LOG]!><time="09:20:53.765+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmediawizardcontrol.cpp:442">
<![LOG[No Need to create Authenticator Info]LOG]!><time="09:20:53.765+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmediawizardcontrol.cpp:720">
<![LOG[Getting MP time information]LOG]!><time="09:20:53.781+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmediawizardcontrol.cpp:731">
<![LOG[Requesting client identity]LOG]!><time="09:20:54.000+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="libsmsmessaging.cpp:4574">
<![LOG[CLibSMSMessageWinHttpTransport:end: URL: sccm.mpmc.hos:80 CCM_POST /ccm_system/request]LOG]!><time="09:20:54.062+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="libsmsmessaging.cpp:6043">
<![LOG[pNext != NULL, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\osdmessaging\libsmsmessaging.cpp,1825)]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="libsmsmessaging.cpp:1825">
<![LOG[reply has no message header marker]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="3" thread="1324" file="libsmsmessaging.cpp:1825">
<![LOG[DoRequest (sReply, true), HRESULT=80004005 (e:\nts_sms_fre\sms\framework\osdmessaging\libsmsmessaging.cpp,4674)]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="libsmsmessaging.cpp:4674">
<![LOG[Failed to get client identity (80004005)]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="3" thread="1324" file="libsmsmessaging.cpp:4795">
<![LOG[ClientIdentity.RequestClientIdentity (), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,793)]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="tsmediawizardcontrol.cpp:793">
<![LOG[failed to request for client]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="3" thread="1324" file="tsmediawizardcontrol.cpp:793">
<![LOG[Exiting TSMediaWizardControl::GetPolicy.]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="tsmediawizardcontrol.cpp:1083">
<![LOG[GetPolicy(), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2007)]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="tsmediawizardcontrol.cpp:2007">
<![LOG[RunWizardForPXE(), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2308)]LOG]!><time="09:20:54.125+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="tsmediawizardcontrol.cpp:2308">
<![LOG[oTSMediaWizardControl.Run( sMediaRoot, true, true ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,936)]LOG]!><time="09:20:54.125+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="tsmbootstrap.cpp:936">
<![LOG[Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1045)]LOG]!><time="09:20:54.125+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="tsmbootstrap.cpp:1045">
<![LOG[Exiting with return code 0x80004005]LOG]!><time="09:20:54.125+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmbootstrap.cpp:1057">
<![LOG[Execution complete.]LOG]!><time="09:20:54.171+000" date="06-10-2008" component="TSBootShell" context="" type="1" thread="844" file="bootshell.cpp:620">
<![LOG[Finalizing logging from process 824]LOG]!><time="09:20:54.171+000" date="06-10-2008" component="TSBootShell" context="" type="1" thread="844" file="tslogging.cpp:1736">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="09:20:54.171+000" date="06-10-2008" component="TSBootShell" context="" type="1" thread="844" file="tslogging.cpp:1578">
<![LOG[Successfully finalized logs to C:\SMSTSLog]LOG]!><time="09:20:54.250+000" date="06-10-2008" component="TSBootShell" context="" type="1" thread="844" file="tslogging.cpp:1635">
<![LOG[Cleaning up task sequencing logging configuration.]LOG]!><time="09:20:54.250+000" date="06-10-2008" component="TSBootShell" context="" type="0" thread="844" file="tslogging.cpp:578">
I'm at my wits end with this software, if I can't find a solution to this problem pretty soon, I will tell management here to can the whole idea and stick with the norton ghost setup.i had this problem today on a virtual lab ive got setup here (windows 2008 server, with sccm 2007sp1 deploying windows server..)
i had to rewrite my task sequence as it was giving me problems - (configuring ADDS) and after going through all the steps I tried yet another pxe boot and it failed, this time with the pxe error Failed to get client identity 80004005 in the SMSTSlog
I checked this log against a know good one from earlier on the same server and indeed the time/date are processed shortly after words, however i pxe booted again and verified time/date on the virtual pc and they were absolutely correct
I tried this and that for 2 hours with no positive result, lastly i rebooted the server and lo and behold the pxe error was gone.
I agree that we need a decent troubleshooting option from Microsoft about this as the documentation appears to be whatever is here or on other forums and in a lot of cases there are no solutions
does changing a task sequence somehow reprogram the PXE setup for WDS/sccm ? I have another server (real) beside me that now wont process PXE boot requests anymore even though it was working fine !
PXE-E51: no DHCP or proxyDHCP offeres were received....
no switch just a crossover network cable between server and client, client was successfully deployed hours before with windows server 2008 via sccm via pxe boot.....
tried all the usual, not much hair left now....
found this site http://susanaguedes.spaces.live.com/Blog/cns!830A1768E1B27E94!350.entry
PXE-E51: No DHCP or proxyDHCP offers were received
The PC cannot contact the DHCP server. Possible causes (see ref [19]):
There is a problem with the DHCP server
The network card or PXE boot portion of the network card is faulty
The network cable is faulty
tested the client PXE boot to another server, worked fine using same network card and cable
the DHCP server on the server reports no problems and has worked fine since I set it up some months ago, indeed if i boot the client into windows server it will get an ip no problem from the dhcp server
so what is wrong here ? how can WDS/ SCCM pxe boot functionality turn itself on or off at will with no user intervention ???
restarted the server 3 times, no difference, restarted WDS many times, no difference, restarted DHCP server service and now I get
PXE-E55: proxyDHCP service did not reply to the request on port 4011
As slightly less common one, with various causes (see ref [19]). Usually the PC has successfully contacted the DHCP server and the PC will even report its DHCP assigned IP address along with the error, but the RIS process could not continue for some reason.
restarted the WDS service and it booted in Windows PE via pxe finally after hours of repetive tasks, only to bring me back to square one with the Windows PE rebooting itself immediatly after loading network support,
ok, back to troubleshooting.... -
Hi All,
I am using project server 2007 and WSS 3.0.
I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
Everything is correct whether it is URL or MS Project profile account on MSP. This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
When i try to connect to MSP on App server, i get the following errors in event viewer.
Event Type: Error
Event Source: MSSOAP
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Connection time out..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: An unanticipated error occurred during the processing of this request..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description: Soap error: Sending the Soap message failed or no recognizable response was received.
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Unspecified client error..
One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
sandeepHi Paul ,
Thanks for reply. The project server URL was already added to the Trusted
Sites/Local Intranet areas in IE.
sandeep -
BO XI 3.1 : Active Directory Authentication failed to get the Active Directory groups
Dear all
In our environment, there are 2 domain (domain A and B); it works well all the time. Today, all the user belong to domain A are not logi n; for user in domain B, all of them can log in but BO server response is very slowly. and there is error message popup when opening Webi report for domain B user. Below are the error message:
" Active Directory Authentication failed to get the Active Directory groups for the account with ID:XXXX; pls make sure this account is valid and belongs to an accessible domain"
Anyone has encountered similar issue?
BO version: BO XI 3.1 SP5
Authenticate: Windows AD
Thanks and RegardsPlease get in touch with your AD team and verify if there are any changes applied to the domain controller and there are no network issues.
Also since this is a multi domain, make sure you have 2 way transitive forest trust as mentioned in SAP Note : 1323391 and FQDN for Directory servers are maintained in registry as per 1199995
http://service.sap.com/sap/support/notes/1323391
http://service.sap.com/sap/support/notes/1199995
-Ambarish- -
Getting RFC response structure in XI
All,
I have a scanario like this,RFC>XI->file where i have to map RFC response to file.I have gone throungh some blogs for this.
I am using RFC sender adapter.
In my message mapping i have mapped RFC response to file structure and in my IM i have used RFC as sender interface.
Is it fine?If your scenario is RFC - XI - File it is not the RFC responce but it is async RFC call.
You call it RFC scenario when the scenario is
send sys --- XI ----File
| |
RFC
For a overview scenario of this scenario and structure creation have a look at my blog Impede Duplicate Files
>>I am wonder how do we get RFC response from R3
Both the Blogs that I replied has the sample ABAP code that is used to send the RFC message to XI.
You can use the imported RFC in both the Message Mapping and the Interface Mapping
Thanks
SaNv... -
In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service. Can anyone please
help me.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not FoundIn my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service.
HI Arivazhagan K,
Could you give some explanation about what you modified? according the to error message, this is "resource is not found issue".
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Multiple actions on If statement true value
I want to do several things when in If statement is true, but cannot seem to do it without writing multiple If statements. For Example, if Collection1 only has 1 row of data, I want to clear Collection2 and update the MyVal context to true. I curre
-
Hi Team, I have one requirements which I am explaining below: Source structure should be: <?xml version="1.0" encoding="UTF-8"?> <ns0:MT_Student xmlns:ns0="urn:bp:xi:hr:edm:test:100"> <Data> <FName> <LName> <Marks>
-
Quality results with purchase order information
Is there any standard report in whichi I can have data like purchase order, vendor, contract, material and quality results? Thanks in advance
-
Hi, We have a form in which we use the call web.show_document(l_url, '_blank'), where l_url is a location of an html file on a local pc. Then in a seperate browser the html file is shown.This works fine for our application. Now some users are migrate
-
Problem JDBC Connection using OCI Driver on Weblogic Portal on Linux
Hi Team, I want a JDBC connection using OCI Driver in Weblogic Portal 8.1 sp4 on Linux. When I had tested using JDBC connection using Plain Java Code it is working. Also when I create the OCI Connection Weblogic Connection Pool it is working. But My