Failed to install ms sql 2012, it shows 1406 Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel. error

Hi friends,
i have tried to install ms sql 2012 on windows 8.1 pro 64 bit but it got failed due to the following error 1406 Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel..
I had run the set up file as administrator. I have ony one user account on my laptop. I have seen in the regestry about permission of user. There is full control to the user. I have also tried the solution related to this issue that are available in
this forum and other.
I have also attache the detail.txt log file here
So i am heartily requesting you guys if you have the solution then please post your solution as soon as possible.
Thanks in advance!!!

Looks like this is a permission issue with account you logged in in your operating system or account if any you chooses to run you SQL Server installation . Or for executing setup file try using run as administrator.
http://www.sperrysoftware.com/kb/questions/7/How+to+Troubleshoot+a+%22Error+1406%3A+Could+not+write+value...%22+or+%22Error+1406%3A+Could+not+write+InstanceIndex+to+key...%22+error+message
http://support.microsoft.com/kb/913559
Raju Rasagounder Sr MSSQL DBA

Similar Messages

Unable to install itunes Win 7, 64 bit. Error: " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BD0AF19C3B9B1A1EE8\C0B7E33AC99B9CE47B20A823B86 1A19F. Verify that you have sufficient access to that key. or contact your support personnel.

Hi,
I'm not able to install itunes in my Win 7 , 64 bit. getting the below mentioned error.. any help would be greatly appriecated.
" Could not open key: UNKNOWN\Components\DA42BC89BF25F5BD0AF19C3B9B1A1EE8\C0B7E33AC99B9CE47B20A823B86 1A19F. Verify that you have sufficient access to that key. or contact your support personnel."

NCPlater to all haveing the error: ***I HAVE THE ANSWER***
iTunes
Could not open key:
UNKNOWN\Components\DA42BC83BF25F5BDOAF18C3B9B1A1EE8\3e43b73803c7c394f8a6b 2f0402e19c2. Verify that you have
sufficient access to that key. or contact your support personnel.
After following instructions for three different solutions that did NOT work; I found the solution that did work
on the support site for Syamntec.
Readers - Please, you must be VERY familiar with pc jargon and windows vernacular to accomplish the reset
of ALL the permissions in your registry.
Follow the ditrections below and pay attention to the notes for those running 64bit Win7.
Step one, back up the registry.
Step two, go to the MS KB: http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf -ed6985e3927b&displaylang=en and download the file that installs subinacl. It is an MSI file, and will do a quick install of a few Microsoft files. Hint: Look in the folder listed below, "subinacle.exe" may already be there.
Step three, create a batch file (subinacle.bat) with the following commands: (Use Notepad - copy & paste, not the red stuff)
cd /d "Program Files\Windows Resource Kits\Tools" (only for 32bit/x86 machines)
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f /grant=system=f
subinacl /subdirectories %windir%\*.* /grant=administrators=f /grant=system=f
secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose
For 64bit machines substitute for first line of bat file:
cd /d "c:\program files (x86)\windows resource kits\tools"
Step four, run the batch file. Let it run until the Command Prompt screen closes, may take 30 minutes or more.
Step five, reboot the machine and run the install again.
Ladies and Gentlemen; this worked for me and allowed immediate installation of two application packages I had been trying for three months! (Including ITunes 10.5)

Hi, i have problem when installing itune. it said: Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel. please help me!

hi,
i have problem when installing itune. it said:
Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
Please help me i can't do anything without itune

For "Could not open key/write value" errors when reinstalling try b noir's user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
[LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
The technique can be applied to the branch of the registry mentioned in the error message.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Problems installing Itunes error message - Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel

Can anyone help? I have been trying to install the new version of Itunes for ages my new iphone wont activate on the old version!! Keep getting the same error message - Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel.
Please Help!!!!!

That particular key can sometimes be hit by malware, liam, so just to be on the safe side I think we should try a malware scan first.
Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
http://www.malwarebytes.org/mbam.php
Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look

Trouble installing updates. "Could Not Open Key: UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\7E577B2224C65CF4E801A9E5237 5DB49. Verify that you have sufficient access to that key, or contact your support personnel."

I am having trouble installing updates from iTunes. It used to work flawlessly. I am having trouble finding an email address where I can contact Apple or iTunes. I do not want to take the chance that they will charge me for a phone call because I think it is unfair for them to charge me, since I am using THEIR software already. THEY NEED TO PAY ME!!
Here is the error message I receive each time I try to install the updates:
"Could Not Open Key:
UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\7E577B2224C65CF4E801A9E52375 DB49. Verify that you have sufficient access to that key, or contact your support personnel.”
If someone would be kind enough to help me, I would greatly appreciate it!!
THANKS!!!!!!

I am having trouble installing updates from iTunes. It used to work flawlessly. I am having trouble finding an email address where I can contact Apple or iTunes. I do not want to take the chance that they will charge me for a phone call because I think it is unfair for them to charge me, since I am using THEIR software already. THEY NEED TO PAY ME!!
Here is the error message I receive each time I try to install the updates:
"Could Not Open Key:
UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\7E577B2224C65CF4E801A9E52375 DB49. Verify that you have sufficient access to that key, or contact your support personnel.”
If someone would be kind enough to help me, I would greatly appreciate it!!
THANKS!!!!!!

In the middle of installing itunes an error comes up and says "Could not delete value C:\Program Files\Common Files\Apple\Mobile Device Support\CFNetwork.resources\da.lproj\from key Software\...\Folders. Verify that you have sufficient access to that key

That comes up but I look for the file on my computer and its not even there? I've had trouble updating/installing the new itunes for the last week any help would surley be appreciated.

Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
tt2

Error 1406 : could not write value to key \software sql server installation

I've problems installins SQL Server with management studio
I tried different steps starting from
Changing permissions of the local user while running both registry editor and installer with adminstrator
i've checked most similar posts here in the forums and followed their steps but no progress ,
this is the error message
i couldn't resolve it till now , i'm in this problem for 4 days till now tried different suggestions but no progress , i'm in a hurry , so please help me
Regards,
Omar

Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068052610
Start time: 2014-08-05 23:21:36
End time: 2014-08-05 23:29:12
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: OMAR
Machine processor count: 8
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2014 Client Tools Connectivity
1033 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Backwards Compatibility
1033 12.0.2000.8 No Yes
SQL Server 2014 Client Tools SDK
1033 12.0.2000.8 No
Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: E:\Sources\SQL Server with management studio\SQLManagementStudio_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140805_232135\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Management Services
Component error code: 1406
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140805_232135\sql_ssms_Cpu64_1.log
Error description: Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40WriteRegistryValues%401406
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Management Services
Component error code: 1406
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140805_232135\sql_ssms_Cpu64_1.log
Error description: Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40WriteRegistryValues%401406
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140805_232135\SystemConfigurationCheck_Report.htm

I can not update my version of itunes. When I install the message "Could not open key UNKNOW \ Instaler \ Products \ E84E5F4E55179FC488DCF773E79CCA45 \ SourceList \ Media. Make sure you have sufficient access to that key or contact the support team." Any

I can not update my version of itunes. When I install the message "Could not open key UNKNOW \ Instaler \ Products \ E84E5F4E55179FC488DCF773E79CCA45 \ SourceList \ Media. Make sure you have sufficient access to that key or contact the support team." Any tips on how to solve this problem?

If doesn't work try use the instructions below BUT in BOTH folders, first in SourceList and after in the Media.
Start>Run put regedit and press Ok.
1. Go to the key: HKEY_CLASSES_ROOT\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceLis t\Media
2. Right click in Media folder, select Permissions from the menu.
3. You will see that is no user, on the "Permissions for..." dialog box which appears next, press the "Add.." button and add in the "All"
4. Back on the first "Permissions for..." dialog box, click on each account in the top-list and make sure each has the "Full Control = Allow" and "Read = Allow" permissions
5. Click the "Advanced" button and the "Advanced Security Settings" dialog box appears
6. On the "Permissions tab" enable the checkmark box named "Replace all child object permissions with inheritable permissions from this object", then press the "Apply" button
7. On the "Owner" tab, highlight the "Administrators" name in the lower listbox, enable the checkmark box called "Replace owner on subcontainers and objects" and press the "Apply Button"

Could not write value APSDaemon to \Software\Microsoft\Windows\Current Version\Run when trying to install itunes, could not write value APSDaemon to \Software\Microsoft\Windows\Current Version\Run when trying to install itunes

I treiws upgrading my itunes to the b=newest version and I got the following error:
"could not write value APSDaemon to \Software\Microsoft\Windows\Current Version\Run. Verrify that you have sufficent access to that key or contact you support personnel"
I then went to that key and changed the permissions on it so that for Everyone - it was Full Controll instead of limited and I also changed the permissions for my administrative account which also didn't have full control. I tried to go back to the Itunes installer but it still wouldn't let me continue the process.
Any help would be much appreciated.
Musicalrabbi2k3

Reinstall the system.

SQL Server Installation failing saying 'Could not write values to registry key \SOFTWARE. Verify you have sufficient access or contact support personnel'

Hi,
I am trying to install SQL server 2012/SQL Server 2014 and I constantly keep getting this error and the Management Tools fails to install.
'Could not write values to registry key \SOFTWARE. Verify you have sufficient access or contact support personnel'
Tried installing even SQL Server 2008 and still get the same error.
Below is the log i get from C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140705_151943\sql_ssms_Cpu64_1.log
MSI (s) (FC:D8) [15:22:55:746]: Executing op: RegAddValue(Name=SQLPath,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools,)
MSI (s) (FC:D8) [15:22:55:746]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE,,BinaryType=0,,)
MSI (s) (FC:D8) [15:22:55:746]: Executing op: RegAddValue(,,)
MSI (s) (FC:D8) [15:22:55:746]: Note: 1: 1406 2: 3: SOFTWARE 4: 5
MSI (s) (FC:D8) [15:22:59:434]: Product: SQL Server 2012 Management Studio -- Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
MSI (s) (FC:D8) [15:23:03:435]: User policy value 'DisableRollback' is 0
MSI (s) (FC:D8) [15:23:03:435]: Machine policy value 'DisableRollback' is 0
Action ended 15:23:03: InstallFinalize. Return value 3.
Just not able to figure out what the problem is, can someone help?
Thanks

Hi,
Thanks for providing log
Following is in the log.
01) 2014-07-09 11:08:53 Slp: Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
(01) 2014-07-09 11:08:58 Slp: Watson bucket for generic failure has been created
(01) 2014-07-09 11:08:58 Slp: Error: Action "Install_sql_ssms_Cpu64_Action" failed during execution.
(01) 2014-07-09 11:08:58 Slp: Completed Action: Install_sql_ssms_Cpu64_Action, returned False
(01) 2014-07-09 11:08:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-09 11:08:59 Slp: Running Action: Install_sql_tools_Cpu64_Action
(01) 2014-07-09 11:08:59 Slp: Sco: File 'D:\Softwares\SQL2012\DeveloperEdition\x64\setup\x64\sql_tools.msi' does not exist
(01) 2014-07-09 11:07:00 Slp: Sco: File 'D:\Softwares\SQL2012\DeveloperEdition\x64\setup\x64\sql_ssms.msi' does not exist
(01) 2014-07-09 11:07:00 Slp: Checkpoint: PREINSTALL_SQL_SSMS_CPU64_ACTION
(01) 2014-07-09 11:07:00 Slp: Sco: Waiting for service 'msiserver' to accept the stop request.
(01) 2014-07-09 11:07:00 Slp: Sco: Attempting to open SC Manager
(01) 2014-07-09 11:07:00 Slp: Sco: Attempting to open service handle for service msiserver
(01) 2014-07-09 11:07:00 Slp: Invoking QueryServiceStatus Win32 API
(01) 2014-07-09 11:07:00 Slp: Sco: Attempting to close service handle for service msiserver
(01) 2014-07-09 11:07:00 Slp: Sco: Attempting to close SC Manager
(01) 2014-07-09 11:07:00 Slp: Target package: "D:\Softwares\SQL2012\DeveloperEdition\x64\setup\sql_ssms.msi"
(01) 2014-07-09 11:07:57 Slp: MSI Error: 1406 Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
(01) 2014-07-09 11:08:38 Slp: InstallPackage: MsiInstallProduct returned the result code 1603.
(01) 2014-07-09 11:08:38 Slp: Using MSI error code to detect the retry option: 1406
(01) 2014-07-09 11:08:38 Slp: No retry-able MSI return code detected.
(01) 2014-07-09 11:08:38 Slp: Watson Bucket 2
Original Parameter Values
From above it seems client tools component is missing from Installation or may be problem with Windows installer but I guess this is not issue with windows installer . Can you re download SQL Server package and run again.
Edit: For further analysis can you also post log from below location on skydrive
C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140709_104804\sql_ssms_Cpu64_1.log
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

SQL Server Management Tools - Could not write value to key \SOFTWARE. Error code: 1406

Detailed Results:
Feature: Management Tools-Basic
Status: Failed
Component Name: Sql Server Management Studio
Component Error code: 1406
Error Description: Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
The first time the installer worked installing perfectly, but I needed an named instance of "SQL2008", so I removed the instances. After this re-installing is not working.
From past 3-4 days I went through most of the links which has provided solutions for error code 1406, and not having success for installing.
I have tried these options,
1) Ran the installer using "Run as Administrator"option. I am an Administrator user for the machine.
2) In Registry Editor, right-click HKEY_CURRENT_USER\Software, and then click Permissions. Click Add, type Everyone, and then click OK. Under Group or user names, click Everyone. Under Permissions, click to select Full Control in the Allow column, and then
click OK.
3) Uninstalled the Sql server product, and used Revo Uninstaller / CCleaner to clean the registry and the remaining files and folders.
4) Multiple versions of SQL installers have been tried (SQL 2008/2012/2014)
5) Logged in as local/Administrator for the machine, tried the similar steps.
6) The same installers are still working in one of the virtual machines for multiple times of installation and uninstallation without having any problems.
Please let me know, if needed further information. Please provide help for installing SQL server management studio.
Regards,
Ananth.

I have the same problem.
I can not install MSSQLManagementStudio. I suppose
that is not the fault of permissions
. I have tried to
install as an administrator
on the computer in the domain where the account has domain administrator permissions.The account is added to the local administrators.
I also have tried to install as local administrator
account after the removal of the domain.
With the same result.
Operating System Windows 8.1 Prof.
I have tried 2012, 2012with SP1 , 2012x86 , 2014. All with same result:
Product: SQL Server 2012 Management Studio -- Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
Other elements installs without any problem.
sql_ssms_Cpu64_1.log show that the problem is in that point:
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\Microsoft\Microsoft SQL Server\110\Tools\ClientSetup,,BinaryType=0,,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(Name=SqlToolsPath,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\ManagementStudio\,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(Name=Path,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(Name=SQLPath,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE,,BinaryType=0,,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(,,)
MSI (s) (1C:C0) [10:32:51:834]: Note: 1: 1406 2: 3: SOFTWARE 4: 5
MSI (s) (1C:C0) [10:33:19:949]: Product: SQL Server 2012 Management Studio -- Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
07/30/2014 10:33:19.949 [540]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
...... rest of the roolbaack next
As i the lines:
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE,,BinaryType=0,,)
MSI i opening the root hive of HKLM/Softftware
and MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(,,)
and trying to Add Default Value.
What is impossible regardless of the
level of permissions.
Please provide help for installing SQL server management studin in any version
Regards,
Michael

Setup failed (Could not write value devenv.exe to key \SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BLOCK_CROSS_PROTOCOL_FILE_NAVIGATION)

Hello, all,
I encounter a really confused problem while installing Visual Studio 2013 Professional.
It say Install cannot continue because some required components failed.
And there is error information given by log file.
[1868:0558][2015-04-18T00:55:46]i000: MUX: ExecuteError: Package (vs_devenv) failed: Error Message Id: 1406 ErrorMessage: Could not write value devenv.exe to key \SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BLOCK_CROSS_PROTOCOL_FILE_NAVIGATION.
Verify that you have sufficient access to that key, or contact your support personnel.
[2058:2044][2015-04-18T00:55:47]e000: Error 0x80070643: Failed to install MSI package.
[2058:2044][2015-04-18T00:55:47]e000: Error 0x80070643: Failed to execute MSI package.
[1868:0558][2015-04-18T00:55:47]e000: Error 0x80070643: Failed to configure per-machine MSI package.
Strange is that I cannot even find the key FEATURE_BLOCK_CROSS_PROTOCOL_FILE_NAVIGATION under
FeatureControl.
I have searched in Internet, but no one gives out a effective way to solve this problem.
Could you help me!!! Thank you very much.

Hello Forever_fzf,
The problem is that Visual Studio is trying to write that key to your OS but failed. There are many possible reasons so it is hard to check it just from the above error info, I think you can take the following actions to test whether they can fix your problem:
1. It is possible the the source(the installer) is corrupt on your OS. So our first step is to check the source. Please download the ISO format and verify its hash checksum sha-1 value by refer to the following page:
https://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs
2. If the source is alright, check that you are administrator and you have ran the setup as administrator. If you've already checked that and you still do not have privilege when install. We need to refer to the following blog:
http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-setup-errors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx
It contains a script, the script will involve subinacl tool to give all registries the Admin privilege, then you will be able to write keys to that registries.
3. The reigistry key HKLM\SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BLOCK_CROSS_PROTOCOL_FILE_NAVIGATION sounds related to IE. May I also know your IE version?
Best regards,
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Skype 6.16 install error: Could not write value to...

hello, i have a windows 8 PC and ive been using skype since i got it and now all of a sudden when i try to open skype it says installing version 6.16 then it comes up with an error that says
"Could not write valur displayicon to key
\Software\Microsoft\Windows\CurrentVersion\Uninstall\{7a3c7e05-ee37-47d6-99e1-2eb05a3da3f7}.
Verify that you have sufficient access to that key. or contact your support perosnnel."
Please help me with this error, ive looked it up everywhere and i cant find anything for it
Solved!
Go to Solution.

Try this in order to update your Skype to the currently latest 6.18.0.105 version:
http://community.skype.com/t5/Windows-desktop-client/Impossible-to-install-v6-13-0-104-Error-1603/m-...
Be aware that if you want to install the currently latest 6.18.0.105 version, then you should use this msi-installer link in order to extract the Skype.exe and Login.cab files:
http://download.skype.com/msi/SkypeSetup_6.18.0.105.msi

Install Error: Could Not Write Value to key

Could not write value to key \IPodManager.IPodManagerUI.1\CLSID verify that you have sufficient access to that key, or contact your support personnel.
I am running as an administrator. Please help?

For "Could not open key/write value" errors when reinstalling try b noir's user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
[LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Could not write value Content Type problem when installing itunes 08. help!

When I tried to update itunes 08 there was an error. Instead, I uninstalled and downloaded the itunes8 setup. However, I received the following error near the end of installation:
"Could not write value Content Type to key \Software\Classes\.aif. Verify that you have sufficient access to that key, or contact your support personnel.
Abort...........Retry............Ignore"
Retry/ignore doesn't work and aborting stops installing. How do I deal with this problem.
Thanks!

Uninstall any version of Skype, if installed. Run the following removal tool: http://www.pcdust.com/Downloads/SRT/SRT.exe Reboot, then try to install the latest version of Skype again. Skype 7.6 (exe version)

Failed to install ms sql 2012, it shows 1406 Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel. error

Similar Messages

Maybe you are looking for