Failed to load preferences error on upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1

Hi Folks,
Since the upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1, i have been getting
failed to load preferences error. During the upgrade the vpn connection get established, but once
i disconnect and try to connect again its starts bombing on "failed to load preferences". For now
i keep uninstalling anyconnect and reinstall an older version which while autoupgrading to 3.0.3054
is able to connect for the first time. Its getting very painful. Any help from the support team will be
appreciated!

I had the same issue and it is due to corrupted preferences.xml file under /opt/cisco/vpn/profile directory. Easy way to fix is uninstall the client and remove the profile directory under /opt/cisco/vpn. Removing the profile directory requires a root access on MAC OS X.

Similar Messages

  • SVN: Failed to load BDB error after upgrade...

    During a recent system upgrade Subversion was upgraded from 1.6.3 to 1.6.4. After the upgrade I couldn't get to the repository through my web server. The log file has this error repeated: Failed to load module for FS type 'bdb'. Using svnadmin and svnlook gave the same errors.
    I went back into /var/cache/pacman/pkg and reinstalled 1.6.3. After that everything was working fine.
    Can anyone confirm? Should a bug report be opened?
    Was this subversion 1.6.4 package compiled without BDB support? Was that intentional or an oversight?
    Matthew
    Brampton ON

    tazboy78 wrote:
    During a recent system upgrade Subversion was upgraded from 1.6.3 to 1.6.4. After the upgrade I couldn't get to the repository through my web server. The log file has this error repeated: Failed to load module for FS type 'bdb'. Using svnadmin and svnlook gave the same errors.
    I went back into /var/cache/pacman/pkg and reinstalled 1.6.3. After that everything was working fine.
    Can anyone confirm? Should a bug report be opened?
    Was this subversion 1.6.4 package compiled without BDB support? Was that intentional or an oversight?
    I remember seeing warnings about bdb being not enabled when I was compiling subversion for the ruby-1.9 update so I never uploaded my version and asked the maintainer to look at it.  I guess the same warning was missed when updating to 1.6.4.  File a bug report.

  • Trying to update cc desktop on mac osx lion and keep getting file download error 204

    Hi ,
    I have Mac OSX Lion 10.7.5 and keep getting this error when trying to update my cc desktop app that is reporting an update. There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page.(Error code: 204)Contact Customer Support
    please resolve.

    I have the same problem and was on lots off sides of adobe, no answer then i searched in the log data and found this.
    06/21/14 19:04:06:710 | [INFO] |  | ACC | LBS | ApplicationFacade |  |  | 43925 | ****************Starting LBS workflow*******************
    06/21/14 19:04:06:715 | [INFO] |  | Download | LBS | ProductInfo |  |  | 43925 | Product locale not specified in the product information file
    06/21/14 19:04:06:715 | [INFO] |  | Download | LBS | ProductInfo |  |  | 43925 | Product name not specified in the product information file
    06/21/14 19:04:06:715 | [INFO] |  | Download | LBS | LBSUtils |  |  | 43925 | Launching LBS in elevated mode
    06/21/14 19:04:12:270 | [INFO] |  | ACC | LBS | ApplicationFacade |  |  | 43999 | ****************Starting LBS workflow*******************
    06/21/14 19:04:12:276 | [INFO] |  | ACC | LBS | WorkflowManager |  |  | 43999 | LBS launched in LEGACY mode
    06/21/14 19:04:12:399 | [INFO] |  | Download | LBS | SystemCheck |  |  | 44009 | System OS Version - major = 10, minor = 7, bugFix = 5
    06/21/14 19:04:12:399 | [INFO] |  | ACC | LBS | WorkflowManager |  |  | 44009 | ACCC System requirements check passed
    06/21/14 19:04:12:433 | [INFO] |  | Download | LBS | ProductInfo |  |  | 44009 | Product locale not specified in the product information file
    06/21/14 19:04:12:433 | [INFO] |  | Download | LBS | ProductInfo |  |  | 44009 | Product name not specified in the product information file
    06/21/14 19:04:12:433 | [INFO] |  | ACC | LBS | WorkflowManager |  |  | 44009 | Bootstrap LBS is successful
    06/21/14 19:04:12:451 | [INFO] |  | ACC | LBS | WorkflowManager |  |  | 44009 | Bootstrapper Lock acquired
    06/21/14 19:04:12:469 | [INFO] |  | ACC | LBS | WorkflowManager |  |  | 44009 | LBS Lock acquired
    06/21/14 19:04:12:501 | [INFO] |  | ACC | LBS | WorkflowManager |  |  | 44009 | Deployment lock check passed
    06/21/14 19:04:12:519 | [INFO] |  | ACC | LBS | WorkflowManager |  |  | 44009 | The resolved URL for package service is https://prod-rel-ffc.oobesaas.adobe.com/adobe-ffc-external/core/v1/applications?name=Creat iveCloud&name=CCLBS&osVersion=10.7.5&platform=osx10
    06/21/14 19:04:14:236 | [INFO] |  | ACC | LBS | WorkflowManager |  |  | 44009 | Successfully downloaded application xml at path /tmp/912ACE51-6B35-48F6-9D63-D863680F0EE3/applications.xml
    06/21/14 19:04:14:314 | [INFO] |  | ACC | LBS | WorkflowManager |  | FileUtils | 44009 |
    06/21/14 19:04:14:314 | [ERROR] |  | ACC | LBS | PDM | PackageDownloadManager |  | 44009 | Failed to create folder at temp location for download operations
    06/21/14 19:04:15:143 | [ERROR] |  | ACC | LBS | PDM | PackageDownloadManager |  | 44033 | Could not init xml parser with download manifest file at
    06/21/14 19:04:15:222 | [ERROR] |  | ACC | LBS | WorkflowManager |  |  | 44009 | PDM stopped with fatal error in downloading PIM with error -3
    06/21/14 19:04:15:344 | [ERROR] |  | ACC | LBS | WorkflowManager |  |  | 44009 | Failed in DOWNLOAD PIM
    06/21/14 19:07:19:779 | [INFO] |  | Download | LBS | ETS |  |  | 43999 | Waiting for the async thread to get the task completed
    06/21/14 19:07:19:788 | [INFO] |  | Download | LBS | ETS |  |  | 44013 | Async thread is completed. Now exiting from function.
    06/21/14 19:07:19:790 | [INFO] |  | ACC | LBS | ApplicationFacade |  |  | 43999 | ACC installation end with exit code: 214
    06/21/14 19:07:19:790 | [INFO] |  | ACC | LBS | ApplicationFacade |  |  | 43999 | ****************Closing LBS workflow*******************
    Adobe please help, it´s not the first problem installing updates in CC, i we pay for it !!!

  • Errors when trying to update cs6 13.4 (I think) on Mac osx 10.8.4

    Errors when trying to update cs6 13.4 (I think) on Mac osx 10.8.4.
    I have a purchased copy. Downloaded patch which also does not work. Very frustrating.

    is that photoshop cs6?
    if yes, and you're trying to update to 13.1.2 from 13.0.1.2, uninstall ps cs6.  reinstall using adobe application manager.  close aam immediately after ps cs6 completes its installation.
    open ps cs6, click help>updates and select 13.1.2. do not update to 13.0.1.2, first.

  • I want to upgrade to ilife iphoto but the default purchase is to osx lion. Do I need to purchase OS X lion before I can purchase ilife iphoto?

    I want to upgrade to ilife iphoto but the default purchase is to osx lion. Do I need to purchase OS X lion before I can purchase ilife iphoto?

    You need to be using Snow Leopard or Lion to run the current version of iPhoto.
    (65823)

  • Trying to upgrade free Mac OSX Lion

    I have a new MacBook Pro and I am trying to upgrade the free Mac OSX Lion. I have followed the link on the box, filled in the various steps etc.
    I keep on receiving an email requesting me to validate my email address and when I follow the link it either goes to a claim reference or back to the uptodate start page. I have not received an App Code via email and being in South Africa I am battling to find support for this issue.
    I did the uptodate over 24 hours ago and still no email with my App Code. Please advise

    See Here for 
    Mac Apps Store Customer Service
    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • I just upgraded to Mac OSX Lion and can't attach documents to my hotmail.  Can anyone help?

    I just upgraded to Mac OSX Lion and can't attach documents to my hotmail.  Can anyone help?

    Hi there,
    Over the last few days, this issue has been driving me up the wall too!
    I downloaded Lion OS a few months ago, but it was only until a few days ago did i attempt to logon to Hotmail to check my account & send an email with an attachment.
    Normally i use the MAC Mail app, which is synchronised to my hotmail account.
    Anyway, I'm not sure whether the Lion OS is the root cause of the issue, however after much digging around on various forums - the issue for me was resolved by downloading the latest version of Microsoft Silverlight 5 (www.microsoft.com/silverlight). Its a free download....

  • Can I upgrade from snow leopard to Mavrick X on my Mac OSX 10.6.8?

    Can I upgrade from snow leopard to Mavrick X on my Mac OSX 10.6.8?

    Does you Mac meet the requirements as outlined at the link below? If so, yes you can upgrade to Mavericks.
    http://www.apple.com/ca/osx/how-to-upgrade/

  • Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

    Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

    Hi
    Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
    The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
    A reinstall should leave all your own personal data and programs in place.
    Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
    Message was edited by: softwater

  • HT4472 What do I need to do to upgrade to a 10.6? I have a Mac OSx version 10.5.8

    What do I need to do to upgrade to a 10.6? I have a Mac OSx version 10.5.8

    Giving just the basics, first you need to confirm that your iMac will run 10.6. See:
    http://support.apple.com/kb/SP575
    Then you need to confirm that your applications and peripherals will run under 10.6 or that they can be upgraded to do so.
    Finally, you need to purchase a retail copy of 10.6. See:
    http://store.apple.com/us/product/MC573Z/A
    Regards.

  • Failed to load backgroud images after upgrade to 4.1.1 in Mozilla Firefox

    Hi,
    I have recently upgraded our test APEX environment from 3.2.1 to 4.1.1.00.23. Everything went smoothly - I have only one small but annoying problem. In both administration and administration services some background graphics are not displayed. This issue occurs only under Mozilla Firefox (in MS IE it OK). The application frontend is OK in both browsers.
    Under Firefox, I inspected the sourcecode in Firebug and the relative links to images. e.g.
    background: url("../apex/builder/bg-region-darkblue-r.gif") no-repeat scroll
    show message "Failed to load the given URL".
    I suppose that the issue might be somehow related to the fact that our application is accessed via apache proxy. Because when I open the administration and/or administration services page in FF directly on the server, it displays correctly (incl. images).
    But the network (Apache proxy) configuration is exactly the same as in the previous version of APEX where we had no problem. Something must have changed in the sourcecode of the new version...
    Does anybody know how to tackle such an issue? I'd like to have it solved before upgrading the production environment.
    Thank you.
    Zdenek

    I forgot to mention that we use EPG instead of Apache HTTPD.
    And, of course, I updated images following instructions in http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21673/otn_install.htm#BHAJIGDA
    >
    As you have mentioned earlier
    Because when I open the administration and/or administration services page in FF directly on the server, it displays correctly (incl. images).Which means the images are uploaded correctly in EPG.
    Maybe there is a virtual directory, or some other setup, on you Apache proxy that is still pointing to a folder has does not have the latest images.
    As you have rightly concluded earlier this is most probably something to do with your proxy setup. Not Apex.
    So, check you httpd file.
    Cheers,

  • "Failed to load resource" error

    Hello,
    Does anyone give me help?
    Some of my deployed applications became unable to run  at all.
    The error message in Chrome development tool's console is "Failed to load resource: the server responded with a status of 404 (Not Found)"
    Before last week, these applications were worked fine. But from last week (I am noy sure when), they do not work.
    So, I tryed to make easy application like helloworld servlet.  it works correctly on local server.
    Then I tried to upload my hanatrial.ondemand.com server, and run. But it does not work with the error like above.
    Additional info: 
    I restarted this application.  Application state on JAVA application dashboard in HCP consol, became "Could not read status of application benefits: Internal Server Error (500)".
    Does anyone have any idea for checking the reason ?
    Thanks and BR,
    Masashi

    Hi all,
    Now it works fine. I am not sure what's coused for this issue.
    Yesterday, I tried to execute these applications which did not work with "resource error".
    But now, I tried again.  Then  they worked well.
    What I did , is just delete Data source bindings. and then dployed and run again.
    I am not sure this is caused the issue.  Because same actions were tried  by myself on last week. But at that time, nothing has been changed.
    Anyway, I am gonig to run them for Demo purpose.
    Thanks and BR,
    Masashi

  • 'failed to load LENOVO_GetSystemType ' error when try to install or uninstall Presentation Director

    It seems like some dll faulty or some program's "Get#####" Funcation failed.
    Anyone have ideas how to fix it?

    Looking at the AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_myprograminfo led us to the last dll loaded being:
    LoadedModule[211]=C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus_res_en.dll
    State[0].Key=Transport.DoneStage1
    State[0].Value=1
    FriendlyEventName=Stopped working
    Scanning the community for "crdb_adoplus_res_en.dll" we got a hot on this issue again:
    Failed to load database information. Error in File temp_
    From the above we found this:
    1. the app.exe.config is all in one package which cannot be separated with the EXE file.
    2. the supporting component such as dll files, app.exe.config etc CANNOT be combined into the EXE file
    Adding the cr3Test.exe.config to the same folder as the cr3Test.exe RESOLVED the problem on Win 7. It also RESOLVED the problem on Server 2012 R2.
    We still need to test on Server 2008 R2 but we are hopeful when that time comes.
    Thanks.
    Bruce

  • Live Preview - failed to load resource error

    Peter-
    I was having problems with the Live preview and tried your debugging method.
    I received the following in Chrome:
    Failed to load resource: http://127.0.0.1:9222/json
    Is there a security setting I need to change?
    Thanks!
    Josh

    Josh -- What OS are you on?
    Thanks!
    - Peter

  • Has Firefox been optimzied for the new Mac OSX Lion? I've been having issues using the browser since upgrading to Lion. Issues include using some websites as well as google e-mail...icons do not appear etc.

    when checking mail in google I am not able to 'star' an e-mail or mark it etc. I don't get the option to do that, as I did before upgrading to Mac Osx Lion

    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About

Maybe you are looking for