Failed to open links on the Intranet.

Hello!
In the technical support page for my company there are several links that allow access to files stored in folders on the server, however when the user gives a click on a link, the browser can not open the corresponding file.
Example:
Link: Technical Support.
Path: ... <a href="file://\\srvbvmg2\support"> ... </ a> ...
At first, I noticed that in the status bar is showing the following information: "http://intranet\\srvbvmg2\support". How do I make Firefox read the path of the shared network folder without displaying the words "http://intranet"?
NOTE: The procedure that was posted in the forum (Firefox fails to open Locan based intranet server files) did not solve my problem.

usbiksc,
Give the steps outlined in this article a shot and let us know if it helps. Best of Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02728195&tmp_task=solveCate gory&cc=us&dlc=en&lang=en&lc=en&product=4083977
I work with HP my posts and opinions are my own.

Similar Messages

Can't open link from the forum which should solve the text replace bug

Can't open link from the forum (http://feedback.photoshop.com/photoshop_family/topics/text_corruption_in_photoshop_cs6_fil e) which should solve the "text replace bug":
http://helpx.stage.adobe.com/photoshop/kb/text-replaced-text-different-layer.html
Anywhere else where I can download thich tech doc?
Thanks in advance

Hi,
Try this link:
http://helpx.adobe.com/photoshop/kb/text-replaced-text-different-layer.html
The one posted needs to be updated.
regards,
steve

Problem with opening link in the Avant Browser

The Avant browser, even with flash enabled, isn't
successfully opening the link inside the email notification message
one constructs inside the Share file(e.g., the link to:
www.share.acrobat.com/**********). I get to the URL but the flash
doesn't activate that would take me to the document's download
page.
All-in-all, this is going to be a nice Web app.

I have the same problem - shocked that this hasn't been addressed by Adobe or Microsoft. It began with recent updates. Adobe Reader will not open a .pdf file on the web. I sometimes get the following dialog but mostly I get a blank screen with "Done" in the status bar.
If I open a .pdf from my hard drive I get a message about protected mode. If I click on the link in the message, I get Adobe instructions about turning off protected mode - but it is already turned off. If i cancel that message i can open a local .pdf.

How to open links in the same window, without changing preferences?

What I want to know is if there's a way to force a click on a link to open in the current window just one time, if the page was using target=_blank or other methods to open a new tab/window.
The context menu doesn't have an option for that, was hoping for a modifier key option or something, or perhaps a plugin that would add such an option.
I know there's an advanced pref to change the behaviour of clicking on links to control new tabs, windows, etc. I don't want to change the default, I just for certain links want to prevent the new tab on a one-up basis.
(currently on Firefox 30 for Mac)

Firefox actually doesn't have any built-in preference for overriding the target attribute. If you are on a site where you know the link is coded to open in a new tab, currently, the best workarounds are:
* drag and drop the link on the address bar
* right-click > Copy Link Location and then paste in the address bar
Neither is convenient...
You might be able to find an add-on for this. For example, Tab Mix Plus, Tab Utilities, and other multi-functional tab-related extensions might have an option to force links into the same tab. In a brief search, I saw one called TargetKiller that is more focused on this but recent reviews mention conflicts with other extensions. If this is a frequent pain point, you could search further on the add-ons site.
* https://addons.mozilla.org/firefox/addon/tab-mix-plus/
* https://addons.mozilla.org/firefox/addon/tab-utilities/
* https://addons.mozilla.org/firefox/addon/targetkiller/
Let us know the progress of your search.
Another possibility is to solicit someone to write a userscript. A userscript is a JavaScript add-on that can modify web pages, but not the user interface (for example, it cannot add a right-click context menu item). You need the Greasemonkey extension to run userscripts, and you need to evaluate them carefully because they are not formally reviewed by anyone.
You can contact userscript authors through these sites, and if someone is interested, they'll usually write the script for free and post it for everyone's benefit:
* https://greasyfork.org/forum/categories/script-requests
* https://openuserjs.org/corner

Key shortcut to force opening link in the same tab?

Is there any specific key shortcut to open any link in the same tab (even if the website specifies it should be opened in a new tab/window)? Like Ctrl+Mouse click forces every link to be opened in a new tab and Shift+Mouse click - new window.
I have already seen this question: https://support.mozilla.org/pl/questions/970999 but I'd like to be able to choose manually every time whether I want to open the link in the same tab or not.

HI the.real.nps,
Thank you for your question. I understand that you would like the option to choose whether or not to open a url in a new tab or the same tab each time a link is clicked.
Currently this can be done by right clicking on a link. Each of these options are provided.

How to force to open link in the same tab ?

Hi Guys,
I am sure this question has been asked many times, but I wasn't successful finding an answer...
In Safari, how do I force to open a link in the same tab (not open in a new tab in same window!)
There must be a way to do it...
Thanks for answering (again).
Ray

Hi Ray
I'm still on Tiger, not Leopard.... but I guess you mean how to stop a link that opens a new window from doing so? Like This one ?
In Tiger, the only way I know other than some 3rd party add-on is to drag the link to the address bar.... although that assumes you know it tries to open a new window by checking the status bar.

Links on the intranet

+Not sure if this is the right forum but here goes.+
We have several Macs in our companies running off of Windows based servers. Our companies intranet (internal website that is only accessible from the inside) was created on a Windows computer with links pointing to our servers. my problem is that the Mac computers cannot access the links. When my Mac users click the links nothing happens. Most of the links are accessing documents/folders on windows servers. I take it that Macs and Windows read links differently, especially if they are being accessed locally. The links are not read as http:// because these are all internally based they are read as file://. Do they need to be read as smb?
*If so, how can I get my Windows computers to read these links and my Mac computers as well?*

Absolute links to files on a local drive do not work between platforms due to differences in the naming systems. If possible, change the links on the pages themselves so that they don't have a prefix, which creates a relative link; if this isn't possible, there is no solution other than using separate links or manually changing the URLs in the browser's address bar.
(32731)

Opening link in the report in a new window

Hi,
I need to have a link in the html report which opens the destination in a new browser window. How can i achieve this? As of now i am using the following code, but the link is not opening in a new window.
<fo:basic-link external-destination="{.//destination}" show-destination="new">
<fo:inline>
<xsl:value-of select=".//heading" xdofo:field-name="heading"/>
</fo:inline>
</fo:basic-link>
Let me know what the problem is, as well as any other way to achieve the same.
Thanks,
Shanmuga.

hi
there is another way to drill down the report of web intelligence.for that we have to customize in the universe level create a folder in custom hierarchy and add your two objects to that folder, i.e empid. and deptid. the order of these objects should be in the way the drilling happens that means if you want to drill down from empid. to deptid. then empid. should be the first object of the folder,save and export the universe to the CMS.Then it ready to use for webi report.Build the query for the report and enable the drill option in the report.Now the report is ready for your requirement.
thanks & regards
Sreekanth K

Buttons made in Indesign to open links on the PDF in new pages

Hi
I have made an interactive PDF which has roll overs and on Click on opens a file. This all works fine appart from the linked files open in the same PDF page which is over the top of the navigation page.
I cant see any setting when making the button in Indesign to open the file in new page. also cant see any setting in acrobat to open all files in new page. (this has to be saved for anyone who opens the file)
Thanks
Grace

How to open an existing Pages document?
Click Pages icon in the Dock to launch Pages.
When Pages is open, click File menu in the Pages menu bar.
Select “Open”.
When the select document dialog box opens up, highlight/select the document and click “Open”
at the bottom right corner of the dialog box.
s
https://support.apple.com/kb/PH15304?locale=en_US

Firefox fails to open locan server based intranet files

We run an intranet from a local server. Hyperlinks such as this work fine with IE and Chrome, eg file:\\server2\intranet\process_instructions.htm but Firefox changes them to this example which then fails to find the file. file:\\\intranet\process_instructions.htm If I go to File Open the actual file, it opens perfectly.
== URL of affected sites ==
http://

This worked for me!
-Install''' NoScript addon''' for FireFox
-'''Tools '''-> '''Addons '''-> '''NoScript '''(General tab, at bottom check '''Scripts Globally Allowed''') - this is so scripts on other sites are not blocked.
- In same window -> '''Advanced tab''' -> '''Trusted tab''' -> Check box:: '''Allow local links'''
- In same window -> '''whitelist tab''' -> paste in '''http://yourwebsite.com''' to '''address of website''' -> '''click allow'''
Bit of an odd work around I know. But I had problems getting user_pref to work correctly.

Open link in the same Window

Hello,
i want to open a link from a WDA Action Method, in order to open a bsp applikation. The new page should appear in the same window (no popup, no new window). Here the code which i have at the moment, but the BSP Applikation starts always in a new window. What can i do ?
data:
lt_parameters TYPE TIHTTPNVP,
ls_url               type string,
lo_window_manager type ref to if_wd_window_manager,
lo_api_component      type ref to if_wd_component,
lo_window                type ref to if_wd_window.
CALL METHOD cl_http_ext_webapp=>create_url_for_bsp_application
      EXPORTING
        bsp_application       = 'ZHRMPBA004'
        bsp_start_page       = 'ZHRMPBPTI006.htm'
        bsp_start_parameters = lt_parameters
      IMPORTING
        abs_url              = ls_url.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
CALL METHOD lo_window_manager->CREATE_external_WINDOW
          EXPORTING     URL            = ls_url
         RECEIVING     WINDOW         = lo_window.
lo_window->open( ).
thanks for replays

You are calling CREATE_external_WINDOW. That API is designed to open the application in a new window. So that isn't appropriate for what you want. If you want to navigate in place then you should use an Exit Navigation Plug.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/ca3351508f04e7e10000000a42189c/frameset.htm

Open link onto the current page in a region?

Was wondering how i would open a website onto my Apex page.
so for example...
i have a link linking to http://somewebsite.com in my apex page
when the link is click the page would populate within a region in apex which now let the user use that website within apex. (not redirecting to the url itself or popping up a new tab)
*I hope that make made sense...

Thanks!
Was wondering.. how do i make it so this error message is default to "no" if that's possible. if other people were to use it.
"Do you want to view only the webpage content that was delivered securely?"
Im using IE 8 at the moment
Edited by: PandaOracle on Feb 13, 2012 10:48 AM

Why does my cursor arrow refuse to open links. The arrow changes to the text bar

When I have links or boxs that tell me to check them to opne something or go somewhere else, my cursor arrow, when I move it over the print, changes to the text bar that shows where my curcsor is within text. Then nothing happens when I click on the link or instructions to "click here."
So when friends or anyone sends me an e-mail with a URL I'm supposed to click on the arrow disappears and goes back to a text bar and I can't open the link. Sometimes I can copy the URL into the browser to make it work, but why can't I click on the link or URL (blue)?
Help!

Two things to try:
1. Trash the preferences file - this often solves otherwise inexplicable issues.
2. A corrupt monitor profile may also be causing the issue.
This thread explains how to change the profile in a Windows machine: http://www.lightroomforums.net/showthread.php?14070-How-to-assign-an-sRGB-ICC-Profile-to-y our-monitor-(Windows)
I will let someone else explain the process for a Mac OS machine if that is what you are using and it appears that the monitor profile may be an issue.
Tony Jay

Open links in the same tab?

Whenever I browse on Firefox and click on a link it opens in a new tab, I want it to open in the same tab. Is that possible? Because every time I open up a link, then my tabs gets longer, like ten in one window.

You can set the browser.link.open_newwindow to 1 on the about:config page
*http://kb.mozillazine.org/about:config
See:
*http://kb.mozillazine.org/browser.link.open_newwindow (default: 3)
*1: current tab; 2:new window; 3:new tab;
This pref set the behavior for JavaScript links:
*http://kb.mozillazine.org/browser.link.open_newwindow.restriction (default: 2)
*0:all; 1:none; 2:only special windows

Urgent Help Required !!!! For using Netscape to open Form on the Intranet

Hi ,
I am successfully able to open Form application in a seperate window using IE 5.0.
I would like to do the same with Netscape Navigator 4.7. The Navigator justshows a page which asks me to download the plugin and then even after I install the plugin it does the same thing over and over again.
Please help !!!!!
Regards,
Rinas

<BLOCKQUOTE>quote:<HR>Originally posted by Andrew Timpone ([email protected]):
Which version of the JInitiator are you using. In any case, your HTML must specify the correct classid and version in the HTML section for IE as well as the HTML section for Netscape.
Below is a sample for JInitiator 1.1.7.27 running forms v6.0
<html>
<head>
<meta http-equiv="Content-Type"
content="text/html; charset=iso-8859-1">
<meta name="GENERATOR" content="">
<title></title>



</head>
<body bgcolor="#FFFCE8">
 
 
 


<object classid="clsid:093501ce-d290-11d3-a3d6-00c04fa32518"
codebase="<<your server and path of JInitiator Plug-in goes here>>jinit11727.exe#Version=1,1,7,27"
align="baseline" border="0" width="1024" height="786">
<PARAM NAME="CODE" value="oracle.forms.engine.Main">
<PARAM NAME="CODEBASE" value="/web_code/">
<PARAM NAME="ARCHIVE" value="/web_code/f60all.jar">
<PARAM NAME="type" value="application/x-jinit-applet;version=1.1.7.27">
<PARAM NAME="serverPort" value="4321">
<PARAM NAME="serverArgs" value="module=<<your form path and name goes here>>">
<PARAM NAME="serverApp" value="default">
<PARAM NAME="lookAndFeel" value="oracle">
<PARAM NAME="separateFrame" value="true">

<COMMENT>
<embed align="baseline" border="0" width="800" height="600" type="application/x-jinit-applet;version=1.1.7.27"
java_code="oracle.forms.engine.Main"
java_codebase="/web_code/"
java_archive="/web_code/f60all.jar"
serverport="4321"
serverargs="module=<<your form path and name goes here>>"
serverapp="default"
pluginspage="<<your server and path of JInitiator Plug-in goes here>>"
colorscheme="Titanium"
lookAndFeel="oracle"
separateframe="true">
<NOEMBED>
</COMMENT>
</NOEMBED> </object> 
</body>
</html>
Below is a sample with JInitiator 1.1.5.21 with forms v5.0
<HTML>



<HEAD><TITLE></TITLE></HEAD>

<OBJECT classid="clsid:9F77a997-F0F3-11d1-9195-00C04FC990DC"
WIDTH=20
HEIGHT=20
codebase="<<your server name and path for JInitiator Plug-in goes here>>jinit115211.exe#Version=1,1,5,21">
<PARAM NAME="CODE" VALUE="oracle.forms.uiClient.v1_4.engine.Main" >
<PARAM NAME="CODEBASE" VALUE="/web_code/" >
<PARAM NAME="ARCHIVE" VALUE="/web_code/f50all.jar" >
<PARAM NAME="type" VALUE="application/x-jinit-applet;version=1.1.5.21">
<PARAM NAME="serverPort" VALUE="4321">
<PARAM NAME="serverArgs" VALUE="module=<<your form path and name goes here>>">
<PARAM NAME="serverApp" VALUE="default">
<COMMENT>
<EMBED type="application/x-jinit-applet;version=1.1.5.21"
java_CODE="oracle.forms.uiClient.v1_4.engine.Main"
java_CODEBASE="/web_code/"
java_ARCHIVE="/web_code/f50all.jar"
WIDTH=20
HEIGHT=20
serverPort="4321"
serverArgs="module=<<your form path and name goes here>>"
serverApp="default"
pluginspage="<<your server name and path for JInitiator Plug-in goes here>>">
<NOEMBED>
</COMMENT>
</NOEMBED></EMBED>
</OBJECT>
</BODY>
</HTML>
Hi Andy,
Thanks a lot !!!
Its working perfectly fine now.
Regards,
Rinas
Hope this helps<HR></BLOCKQUOTE>
null

Failed to open links on the Intranet.

Similar Messages

Maybe you are looking for