Failed to save admin audit log for this cmdlet invocation.

HI, I have a co-existence of exchange 2010 and 2013SP1. We are in the process of user mailbox migration from old to new exchange. When we try to configure auditing we get the below message
[PS] C:\Windows\system32>Set-AdminAuditLogConfig -AdminAuditLogEnabled $True
WARNING: The arbitration mailbox 'SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}' for the organization '' is
located on a server that doesn't have Exchange 2013 installed. The arbitration mailbox must be moved to an Exchange
2013 server before you can enable auditing.
WARNING: The command completed successfully but no settings of 'Admin Audit Log Settings' have been modified.
However as per below arbitration and system mailbox are already moved to new exchange.
[PS] C:\Windows\system32>Get-Mailbox -Arbitration | FL Name,DisplayName,ServerName,Database,AdminDisplayVersion
Name                : SystemMailbox{1f05a927-0bf4-475d-b944-392523e3cf54}
DisplayName         : Microsoft Exchange Approval Assistant
ServerName          : auh2mbx02
Database            : EXHDB01
AdminDisplayVersion : Version 15.0 (Build 847.32)
Name                :
SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}
DisplayName         : Microsoft Exchange
ServerName          : auh2mbx02
Database            : EXHDB01
AdminDisplayVersion : Version 15.0 (Build 847.32)
Name                : FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042
DisplayName         : Microsoft Exchange Federation Mailbox
ServerName          : auh2mbx02
Database            : EXHDB01
AdminDisplayVersion : Version 15.0 (Build 847.32)
Name                : SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}
DisplayName         : Microsoft Exchange
ServerName          : auh2mbx02
Database            : EXHDB01
AdminDisplayVersion : Version 15.0 (Build 847.32)
Name                : Migration.8f3e7716-2011-43e4-96b1-aba62d229136
DisplayName         : Microsoft Exchange Migration
ServerName          : auh2mbx02
Database            : EXHDB01
AdminDisplayVersion : Version 15.0 (Build 847.32)
How can we fix this??

Try running
setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
from the Exchange 2013 distribution again.
If that doesn't fix it, delete the mailbox database and run the setup command again.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

Mailbox Admin Audit Logs

Hi All ,
Could you tell me how to clear Mailbox Admin Audit Logs for past days , i have disabled the audit logs for mailboxes but still i could able to see the information from ECP about last mailboxes accessed details also i've decreased the age limit
of mailbox still the information were reflecting in ECP
Set-Mailbox -Identity xxxx -AuditLogAgeLimit 0
Confirm
You've specified the mailbox audit log age limit of 0 for mailbox "XXXX". If you continue, all log entries will
be deleted. This change takes effect immediately.
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): a
- Sivashankar. Please mark as answer/useful if my contribution is helpful

Hi,
I tested in my lab, it is the same with your result. As a workaround, since the mailbox audit log entries are stored in the Audits folder, we can MFCMAPI to delete the Audits folder which is a subfolder of Recoveralbe Items folder.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Admin Audit log size?

I have enabled admin audit log age to 90 days, just wanted to know if there is anyway to know how much storage these logs are occupying?

(1)    Configuration of the Admin Audit Logging feature is stored in the Active Directory (AD) directory on the Admin Audit Log Settings configuration object
(2)    Auditing is enforced by the Admin Audit Log Agent, which is a part of the Cmdlet Extension Agent Framework (the Provisioning Layer for the Cmdlet Infrastructure)
(3)    A system arbitration mailbox known as the Discovery System Mailbox is used to store audit log records
(4)    Audit log records are stored in Recoverable Items (the dumpster) in a dedicated sub-folder called AdminAuditLogs
(5)    The agent uses Exchange Web Services (EWS) to save the audit record to the Discovery System Mailbox
(6)    The agent can also use Exchange Server Object (XSO) APIs to directly access the Discovery System Mailbox
(7)    Audit Logs are retrieved using tasks that rely on Content Indexing of the audit logs to make them searchable
To only get the overall size, use this command
Get-MailboxStatistics "SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}" | FL *Size

Audit logs for tables

Dear all,
I have a requirement of implementing audit logs for tables to insert,update,delete operations. Is there any way to achieve this since triggers are present only for insert,update and delete ?
I am using database 9.2.0.3.
thanks in advance.

Hi,
After I turn on audit trail on the database sever and issue DML statment. I have found nothing in the audit table.
1) Set "audit_trial" = true in teh init.ora file
2) Run the $ORACLE_HOME/rdbms/admin/cataudit.sql
3) Connect sys/password by sysdba and issue the following command:
- AUDIT SELECT TABLE, UPDATE TABLE, INSERT TABLE, DELETE TABLE BY APPS BY ACCESS;
Do I need to re-set the database after step 1? or I have made some wrong.
Thanks.

Unable to find admin audit logs folder

I am constantly receiving this error on several of my Exchange 2010 servers.
I believe it has to do with members of my team performing general administrative tasks within Exchange 2010.
I would like to continually log these actions if possible, rather than disabling admin audit logging altogether.
Application Event Log with (Event ID)
Application\MSExchange Management Application (5001)
Time: 3/1/2012 11:25:53 AM. Event description: Failed to create EWS mailer. Organization: Error: Microsoft.Exchange.Management.SystemConfigurationTasks.AdminAuditLogException: Unable to find
the admin audit logs folder. Reason: System.Web.Services.Protocols.SoapException: The specified server version is invalid. at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream,
Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at Microsoft.Exchange.SoapWebClient.CustomSoapHttpClientProtocol.<>c__DisplayClass4.<Invoke>b__3() at Microsoft.Exchange.SoapWebClient.HttpAuthenticator.NetworkServiceHttpAuthenticator.AuthenticateAndExecute[T](SoapHttpClientProtocol
client, AuthenticateAndExecuteHandler`1 handler) at Microsoft.Exchange.SoapWebClient.SoapHttpClientAuthenticator.AuthenticateAndExecute[T](SoapHttpClientProtocol client, AuthenticateAndExecuteHandler`1 handler) at Microsoft.Exchange.SoapWebClient.EWS.ExchangeServiceBinding.FindFolder(FindFolderType
FindFolder1) at Microsoft.Exchange.ProvisioningAgent.MailboxLoggerFactory.EwsMailer.GetAdminAuditLogsFolder(ADUser adUser) at Microsoft.Exchange.ProvisioningAgent.MailboxLoggerFactory.EwsMailer.GetAdminAuditLogsFolder(ADUser adUser) at Microsoft.Exchange.ProvisioningAgent.MailboxLoggerFactory.EwsMailer..ctor(OrganizationId
organizationId, ADUser adUser, ExchangePrincipal principal) at Microsoft.Exchange.ProvisioningAgent.MailboxLoggerFactory.Create(OrganizationId organizationId, ADUser mailbox, ExchangePrincipal principal)

hi,
I would invite other engineers to
come in to discuss.
Which is more conducive to fix
your issue.
hope can help you
thanks,
CastinLu
TechNet Community Support

First call attempt fails with 12000; reason="Routes available for this request but no available gateway at this point"

We've installed a new Audiocodes Mediant 1000B gateway for our customer. They only have about 6 users enabled for Enterprise voice and using Lync for all calls. They have an intermittent problem whereby the first call attempt to a number on the
PSTN fails with 12000; reason="Routes available for this request but no available gateway at this point". There is only one PSTN gateway installed. All routes point to this gateway. What I found initially is that the calls
were failing after 10 seconds which is the default "failovertimeout" in the OutboundRouting.exe.config. I found this post http://voipnorm.blogspot.co.uk/2012/06/lync-2010-gateway-timeout-call-failures.html and
changed the value to 20 seconds. Subsequent failures failed after 20 seconds (the new value). The interesting thing is that the second attempt even a couple of seconds later succeeds. My Lync server event log has 46046 "A call to a PSTN
number failed due to non availability of gateways." for the failed call and 46047 "A PBX gateway is now responding to requests after some failures." for the successful call moments later.
My environment is Lync 2010. A single enterprise edition Front End with collocated mediation. The server is virtual and in a different physical location to the gateway. The two sites are connected via a LES1000. The RTT between the
sites is very low so it isn't necessarily networking.
In the Syslog output on the Audiocodes we don't see the call even reach the gateway. It's likely that Lync has simply marked the gateway as down and doesn't route the first call. Then it wakes up and marks it as up and routes the next call.
Update wise I'm on 4.0.7577.183, 199 and 217 for those that are up to date and the only components that are behind say that 223 is available. Those being Core Components, Lync Server, Conferencing Server and Web Components.
As I said, this is intermittent, apparently doesn't happen for every user (which I don't buy), but is easily replicated on request.
I definitely think changing the failovertimeout value has reduced the number of failures. But realistically I don't want users sitting there for 20 seconds before their call fails. Or 19 seconds for the call to route.
I've found a few posts on this and similar issues. I don't get the 25051 or 25052 errors.
Any help gratefully appreciated.
Regards
Randy Chapman
Best Regards Randy Chapman

Try to change the value of Failovertimeout to 1000.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

In perfdatasource querying for global snapshot failed with error 'the size limit for this '

I received scom alerts from two win 2k8 r2 servers , hosting exchange 2010 mailbox roles , the alerts came almost in same time from both servers ,
can I ignore those alerts
or can someone give a me a clue how can I troubleshoot those alert , please any help would be appreciated
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
from Ops-mgmt logs
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 1
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.OperatingSystem.PercentMemoryUsed.Collection
Instance name: Microsoft Windows Server 2008 R2 Enterprise
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 1
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.LogicalDisk.PercentIdle.Collection
Instance name: " edb file path "
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 2
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.NetworkAdapter.CurrentBandwidth.Collection
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 2
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.ForefrontProtection.FPE.Server.PerformanceCollection.RealtimeScanMessageRate

Hi Blake ,
Thanks for your reply , I appreciate your help ,
I didn't put the alert from scom console because they were same as the events ( same source )
Health Service Modules, I didn't want to spam
more :-)
also the two servers encountered the issue were mailbox servers and part of same DAG , it worth mention the alert were resolved
by Exchange 2010 Correlation Engine service
http://blogs.technet.com/b/kevinholman/archive/2010/10/15/clustering-the-exchange-2010-correlation-engine-service.aspx
http://support.microsoft.com/kb/2592561
also the Opsmgmt logs are full of waring and error event like 2023 , 21402 , 21403 , 1207 !!
Log Name: Operations Manager
Source: HealthService
Date:
Event ID: 2023
Task Category: Health Service
Level: Warning
Keywords: Classic
User: N/A
Computer: server 1
Description:
The health service has removed some items from the send queue for management group "SCOM" since it exceeded the maximum allowed size of 15 megabytes.
1- alert from console >>
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.OperatingSystem.PercentMemoryUsed.Collection
Instance name: Microsoft Windows Server 2008 R2 Enterprise
EventSourceName: Health Service Modules

Audit logs for read operation on tables

I have a requirement of implementing audit logs for tables on read / select operation in addition to insert,update,delete operations. Is there any way to achieve this since triggers are present only for insert,update and delete ?
thanks in advance

Hi,
yes there are many ways you can audit the Source database according to your requirments. as you need to audit the select , insert etc you can audit in many ways
1) By implementing policies , (i.e) FGA , or statement policy on a given table or a given user.
2) you can also do the required task by implementing the alerts on specific conditions like select on a specifc table etc
you can use these utileties from AV console.
Regards.

SQLException in the audit log for the Message Display Tool

Hi
I´m newbie in PI Technology, and i have some issues when i try to do the next.
This is the scenario:
I need to communicate two systems, for one side i have SAP, and for the other side i have ADI (legal system) so, i use PI to do this (the communication), PI receive the data from SAP by means abap proxy, until this everything is correct, then i do the mapping of the data and i send a message to ADI (with the SAP XI Runtime Workbench) by means JDBC adapter, if i check the sended message with "Message Display Tool" show that the message was sent (status "Delivered") but if i check the received messages option, in the audit log displays the five next errors:
Error: Could not execute statement for table/stored proc. "FADIA4" (structure "StatementFADIA4") due to java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: Adapter Framework caught exception: null
Error: Delivering the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation..
if there are somebody that maybe could know what is the problem?, could the problem be the side of the legal system?, because inside of PI when i do the Test Configuration in the Integration Directory, the end of the test is successful.
Any comment is well received!!
Thanks,
Vicman
P.D. sometimes the error is: java.sql.SQLException: Token ) was not valid. Valid tokens: DAY PATH YEAR LABEL MONTH OPTION RESULT CONNECTION TRANSACTION.
what does it means?

Hi Pooja,
thanks for you quickly response!
XML sended:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_PgDocVentaECC_req xmlns:ns0="http://gmodelo.com/ECC/enviarCobranza">
   <DT_DatosDeControl>
      <MIDDLEWARE_ID/>
      <QUICK_ID/>
      <INTERFACE_NAME/>
      <MESSAGE_ID/>
      <LOG_ID/>
      <USER_ID/>
      <SOURCE_SYSTEM/>
      <TARGET_SYSTEM/>
   </DT_DatosDeControl>
   <DT_PagoDocVentaECC>
      <VKORG>TVKO</VKORG>
      <VKBUR>TVBUR</VKBUR>
      <VKBUR1>TVBUR</VKBUR1>
      <ROUTE>TVRO</ROUTE>
      <ROUTE1>TVRO</ROUTE1>
      <BLART>Q</BLART>
      <BELNR>100</BELNR>
      <WRBTR>200</WRBTR>
      <LFART>100</LFART>
      <VBELN>100</VBELN>
   </DT_PagoDocVentaECC>
</ns0:MT_PgDocVentaECC_req>
this is the XML received:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_PgDocVentaADI_req xmlns:ns1="http://gmodelo.com/ADI/recibirCobranza">
<StatementFADIA7>
<FADIA7action="INSERT">
<Table>FADIA7</Table>
<Access>
<NUMCIA>123</NUMCIA>
<NUMALM>234</NUMALM>
<SUBALM>300</SUBALM>
<CVETOP>16</CVETOP>
<FOLOPV>22</FOLOPV>
<SECOVA></SECOVA>
<IMPOVA>200</IMPOVA>
<ALMOVA>5678</ALMOVA>
<SUBOVA>21</SUBOVA>
<TOPOVA>21</TOPOVA>
<FOPOVA>41</FOPOVA>
<FECOVA>100</FECOVA>
<STSOVA> </STSOVA>
</Access>
</FADIA7></StatementFADIA7>
</ns1:MT_PgDocVentaADI_req>
what do you think about it?, anything wrong?

How to enable the Exchange 2010 Admin Audit logs in Event Viewer

How to enable the Exchange 2010 Admin Audit(Mailbox Auditing) logs in Event Viewer.
- Sivashankar. Please mark as answer/useful if my contribution is helpful

Hi Siva,
We could execute the command below to view Administrator Audit Logging settings:
Get-AdminAuditLogConfig
If it is not enabled, please run the command below:
Set-AdminAuditLogConfig -AdminAuditLogEnabled $True
In addition, here are some references for you to utilize this feature:
Configure Administrator Audit Logging :
http://technet.microsoft.com/en-us/library/dd335109(v=exchg.141).aspx
Search the Administrator Audit Log :
http://technet.microsoft.com/en-us/library/ff459262(v=exchg.141).aspx
Regards,
Rebecca Tu
TechNet Community Support

Audit Logs for Administrators

Hello
How can we audit the Site Administrators or Farm admins when changing site Settings or enabling Features on the web applications or Site Collection level? the Site Collection Audit Logs Does Not
Yasser

Hi,
There isn’t anything like site collection auditing for administrative events like feature activations etc. This info will however be in the ULS if the logging level is set high enough. Obviously there are downsides of a high logging level - lots
of noise in the logs, logging location will get filled up quickly.
Cheers
Matt

Audit log for document library

Hi All,
I have a requirement to generate a report for a document library which contains confidential “Policies”
documents, this library exist under sub site. Now my clients wants a log report, which should give information like Who accessed/download/modified document?
Please guide me
MercuryMan

You need to first enable menu audit log reports SharePoint 2010. Please follow the given below steps.
1. Site Action > site settings
2. Site collection features
3.Click on the reporting features
4.Search for the Reporting feature
4.Click on Activate button
Otherwise, you could try automate solution named Lepide Auditor for SharePoint (http://www.lepide.com/lepideauditor/sharepoint.html) which assists to generate report and and provides the
auditing data into real time. It gets real time alerts on detecting changes to users, groups, lists, libraries, folder and permission etc.
Lepide - Simplifying IT Management

Security Audit Log for XI IB

Hello,
on the ABAP Stack it is possible to activate the security audit log, to log activities on certain objects/functions. Is there also a possibilty to do this for the JAVA-Stack.
We have for legal reasons to log, want users are doing on the productive XI system. E.g. we wanna log if someone is changing the value mapping or configurating the adapter.
Regards, Werner

Hi,
chk out these links
Audit Log
http://help.sap.com/saphelp_me21sp2/helpdata/en/23/c9833b3bb1780fe10000000a11402f/content.htm
regards
jithesh

Security audit log for the last 30 days?

Hi,
My current settings for the security audit log is 20 MB (by default). I dont want to control it with file size limitation, but by the no. of days the audit is recorded (max 30 days).
What are the parameters that I would need to maintain?
Or any additinal config is required?
Thanks,
Abdul

Hi,
My current configuration is like this:
Name                Description                                           Current value                                            System default value
FN_AUDIT     Name of security audit file          audit_++++++++
DIR_AUDIT     Directory for security audit files     /usr/sap/GSP/DVEBMGS00/log     /usr/sap/GSP/D00/log
rsau/enable     Enable Security Audit          0
rsau/max_diskspace/local     Maximum space for security audit file     300M     20M
rsau/max_diskspace/per_day     Maximum size of all security audit files per day          0
rsau/max_diskspace/per_file     Maximum size of one single security audit file          0
rsau/selection_slots     Number of selection slots for security audit          2
rsau/user_selection     Defines the user selection method used inside kernel functions          0
I have just activated the audit, and in just 30 minutes, I can see that the file is about 45MB. If this is the growth rate, the 300MB allocated for audit will completely used in just a day.
My requirement is - I want to track users and their activities for the last 30 days (or 45 days). No log should be overwritten unless it is atleast 30 days old.
In SM20, when I give selection from 1.1.10 to 31.1.10, it should show me all the activities during this period, without any breaks.
Other doubts: Do I have to start auditing manually every day? Or will it keep writing logs until it reaches 300 MB which can spread upto multiple days.
Regards
Abdul
Edited by: Abdul Rahim Shaik on Feb 4, 2010 11:17 AM

Unable to get Audit logs for Data Mining Model Oracle11g

Hi All, I followed all the steps given below 2 links but not getting any audit logs.
http://download.oracle.com/docs/cd/B28359_01/datamine.111/b28130/install_odm.htm#DMADM024
http://download.oracle.com/docs/cd/B28359_01/datamine.111/b28130/schemaobjs.htm#sthref233
Made sure the audit_trail is set to DB.
SQL cmds and its output shown below
SQL> AUDIT GRANT,AUDIT,COMMENT,RENAME,SELECT ON mining model NB_SH_Clas_sample;
Audit succeeded.
SQL> COMMENT ON MINING MODEL NB_SH_Clas_sample IS 'i am here';
COMMENT ON MINING MODEL NB_SH_Clas_sample IS 'i am here'
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Process ID: 31648
Session ID: 135 Serial number: 114
SQL> quit
Please help me if i have left out any step
Thanks in Advance

Hi.
Please take a look at the other concurrent thread on model object auditing for more detailed information. If you have Oracle support, please file a TAR with Metalink (http://metalink.oracle.com).
Regards, Peter.

Failed to save admin audit log for this cmdlet invocation.

Similar Messages

Maybe you are looking for