Failed to set Subscriptions on the WSUS Server

We are running SCCM 2012 R2; synchronization of updates is not working.
The SUP is running on a Windows 2008 R2 server and it is not the Site Server.
Below I have some log data. I have already tried uninstalling and reinstalling WSUS.
WCM.log
Starting WSUS category sync from upstream... SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:22 PM 4488 (0x1188)
Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:27 PM 4488 (0x1188)
Attempting connection to WSUS server: cobalt.ad.northcentral.edu, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:27 PM 4488 (0x1188)
Successfully connected to server: cobalt.ad.northcentral.edu, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:27 PM 4488 (0x1188)
Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
Attempting connection to WSUS server: cobalt.ad.northcentral.edu, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
Successfully connected to server: cobalt.ad.northcentral.edu, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
Category Company:94d731de-22a6-4458-dc4d-b5267de026fc (Adobe Systems, Inc.) not found on WSUS SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
Subscription contains categories unknown to WSUS. SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ALGAE.ad.northcentral.edu SITE=NCU PID=1204 TID=4488 GMTDATE=Tue Jan 06 19:14:53.974 2015 ISTR0="cobalt.ad.northcentral.edu" ISTR1=""
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
Waiting for changes for 59 minutes SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
wsyncmgr.log
Found active SUP SUP.ad.domain.tld from SCF File.SMS_WSUS_SYNC_MANAGER
1/6/2015 1:10:45 PM    4576 (0x11E0)
Sync failed: WSUS update source not found on site NCU. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSourceSMS_WSUS_SYNC_MANAGER
1/6/2015 1:10:45 PM
4576 (0x11E0)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=Siteserver.ad.domain.tld SITE=NCU PID=1204 TID=4576 GMTDATE=Tue Jan 06 19:10:45.260 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source
not found on site NCU. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0SMS_WSUS_SYNC_MANAGER
1/6/2015 1:10:45 PM
4576 (0x11E0)
Sync failed. Will retry in 60 minutes
SMS_WSUS_SYNC_MANAGER 1/6/2015 1:10:45 PM
4576 (0x11E0)
Setting sync alert to active state on site NCU
SMS_WSUS_SYNC_MANAGER 1/6/2015 1:10:45 PM
4576 (0x11E0)
Sync time: 0d00h00m00s   SMS_WSUS_SYNC_MANAGER
1/6/2015 1:10:45 PM
4576 (0x11E0)
WSUSCtrl.log
Failed to create instance of Microsoft.SystemsManagementServer.WSUS.WSUSServer. error = Unspecified errorSMS_WSUS_CONTROL_MANAGER
1/6/2015 12:39:11 PM
4888 (0x1318)

Blank out/remove all of the categories you have configured in ConfigMgr on the Software Update Point. Then run a full synchronization from the console. This will synch up all available categories without trying to subscribe to any. Then, you can go back
re-select the categories that want (after the full synch completes) and perform another full synch.
Right now, you are trying to subscribe to a category that doesn't exist.
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error

Recently restored SCCM 2012 SP1 from Sever 2008 R2, to Server 2012 R2. I had Updates Publisher installed on old 2008 Server with Firefox and Chrome imported into Configuration Manager. Since I have upgraded I am no longer able to sync updates with Microsoft.
WCM.log says:
Category Product:44048288-2aac-b2b5-3730-fc020622ea05 (Firefox) not found on WSUS
Category Product:cc5cb1bb-6b87-94ae-f96a-f758195112a7 (Chrome) not found on WSUS
Subscription contains categories unknown to WSUS.
Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error
STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=wdlsccmpri.aarcorp.com SITE=AAR PID=2788 TID=4668 GMTDATE=Mon Feb 17 18:22:43.654 2014 ISTR0="wdlsccmpri.aarcorp.com" ISTR1=""
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=
I have gone to deselect these products from syncing in Administration> Site > Configure Site Components >Software Update Point Products Tab. They are not there. Any help on getting SCCM to sync updates would be greatly appreciated.

PROBLEM
=========
Unable to sync after moving the Primary site server to different OS.
CAUSE
=======
Issues with the product and classification setup in the SUP after the restore.
RESOLUTION
===========
Ran below query to check if we have reference to Firefox and Chrome categories in the database.
QUERY:
select CategoryInstance_UniqueID, CategoryInstanceName
from fn_ListUpdateCategoryInstances(9) cat
where cat.AllowSubscription=1 and cat.IsSubscribed=1 and cat.IsParentSubscribed=0
order by cat.CategoryInstance_UniqueID
RESULT: [Along with other products we found Chrome and Firefox]
Product:44048288-2aac-b2b5-3730-fc020622ea05 Firefox
Product:cc5cb1bb-6b87-94ae-f96a-f758195112a7 Chrome
Ran Select Query
select * from CI_CategoryInstances where categoryinstanceid in
(select categoryinstanceid from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
CategoryInstanceName = 'Chrome')
RESULT:
CategoryInstanceID CategoryInstance_UniqueID CategoryTypeName DateLastModified SourceSite ParentCategoryInstanceID IsDeleted rowversion
16777523 Product:cc5cb1bb-6b87-94ae-f96a-f758195112a7 Product 2013-11-27 21:05:23.000 AAR 16777522 0 0x0000000006B08673
16777549 Product:44048288-2aac-b2b5-3730-fc020622ea05 Product 2013-11-27 21:05:23.000 AAR 16777536 0 0x0000000006B08676
Ran Select Query
select * from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
CategoryInstanceName = 'Chrome'
RESULT:
CategoryInstanceID LocaleID CategoryInstanceName rowversion
16777523 9 Chrome 0x0000000006B08674
16777549 9 Firefox 0x0000000006B08677
We did find Chrome and Firefox items in the database.
We need to delete these items in the database.
We used below queries to delete the reference from the database.
delete from CI_CategoryInstances where categoryinstanceid in
(select categoryinstanceid from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
CategoryInstanceName = 'Chrome')
delete from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
CategoryInstanceName = 'Chrome'
After deleting performed Scheduled Sync. Was successful

Error: Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.

Hello,
I have a lightswitch web-application in development, which I need to copy from one computer to the other. I have tried doing it both through Git and by simply copying the solution and opening the project on another machine. The project builds without errors,
but when I try to debug it, it opens a web-browser, loads to 100% and pops up an error - Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.
Now, I have tried repairing Visual Studio on my machine, reinstalling .NET framework and setting <basicAuthentication enabled="false" /> in web.config, yet it still does not run.
When using Fiddler, it shows an error while loading the application - "HTTP/1.1 500 Internal Server Error" , which I honestly don't know what it means.
The application uses ComponentOne and Telerik modules, but they are both installed on both machines.
The application does run perfectly on the original machine, but it is not working on any other one.
Both machines are using Win 8.1 and Visual Studio 2013 Update 4.
I have tried to look this up online, but most people's problem are when they are deploying the app, not just debugging. I would be really happy for any help with this issue.
Thanks!

I have the same problem on one of my development machines. Whenever I create a new project, the System.IdentityModel.Tokens.Jwt nuget package is not referenced properly. The project compiles correctly but you are not able to debug as I get the same error
as you.
If you open up your references and there is an error next to any of your references make sure that you correct them. In the case of the jwt reference error, I have to remove the jwt reference and then add it back from the packages folder.
This may not be your problem but could point you in a direction?

The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
online & server 2008 on my LAN , now I have changed the server for Online)
Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
error code is as follows -
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
System.Net.WebException -- The operation has timed out
Source
System.Web.Services
Stack Trace:
   at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
   at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
   at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

Hi Sagar,
First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
Please try to run iisreset on the WSUS server, then try to reconnect.
Also, please try to run the server cleanup wizard to remove the unused update.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Server cleanup wizard problem - unable to connect to the WSUS Server Database.

I'm trying to run server cleanup wizard.. it starts to run and then after a while it gives me this error:
The WSUS administration console was unable to connect to the WSUS Server Database.
Verify that SQL server is running on the WSUS Server. If the problem persists, try restarting SQL.
System.Data.SqlClient.SqlException -- Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
The statement has been terminated.
Source
.Net SqlClient Data Provider
Stack Trace:
   at Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow(SoapException soapException)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
   at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
   at Microsoft.UpdateServices.UI.AdminApiAccess.WsusSynchronizationInfo.InitializeDerivedProperties()
   at Microsoft.UpdateServices.UI.AdminApiAccess.WsusSynchronizationInfo.get_NewUpdatesCount()
   at Microsoft.UpdateServices.UI.SnapIn.Pages.SyncResultsListPage.GetSyncInfoRow(WsusSynchronizationInfo syncInfo)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.SyncResultsListPage.GetListRows()
Thanks

Some questions:
Are there any other databases running on this Std Edition SQL service?
[a] Yes there are, we have Kaspersky enterprise DB, Report Server DB and local application DB.
Are there any other services running on this WSUS Server?
[b] Yes there are, we have Active Directory, Kaspersky enterprise, SQL Server 2005, and WSUS all on the same server.
How many days since your WSUS server was first installed?
[c] It's been about a year now.
What is the physical size of the SUSDB.mdf file?
[d] 9,666,752 KB
What is the hardware configuration of this machine, including disk drives?
[e] Intel Xeon 1.86, 2GB Ram, HD C: 39GB - E: 25.2, running Windows Server 2003 R2 SP2.
How many client systems are you servicing from this WSUS Server?
[f] Around 40.
What products/classifications are you synchronizing.
[g] Windows XP-vista, Windows Server 2003, Office 2003-2007, SQL Server 2005.
Okay, for starters, you have an underpowered/overextended machine running Active Directory, ASP.NET, and a database server, all on a sub 2GHz CPU with 2GB RAM, and not enough disk spindles. The machine has had WSUS running for about a year and is 9GB in size.
There's no doubt in my mind that some of your performance issues are directly related to disk and database fragmentation.
There's also no doubt that some of your performance issues are directly related to memory starvation.
I'd suggest the following long-term fixes:
1. Get a second machine. Make it a dedicated database server. Provision it accordingly to support servicing multiple database applications.
2. Lacking #1, this machine needs more memory. It also needs more disk spindles. At a minimum the databases being serviced should be on a dedicated physical drive; ideally there would be two dedicated drives allocated for supporting database services. The
For the short-term fixes, do this:
1. During after-hours time, if you don't already have one, build a temporary machine that can act as a DC/GC, while you take this machine temporarily offline.
1. Shutdown the Update Services service, SQL Server database engine, and any other services dependent on the SQL Server database engine (Kapersky, and other reporting applications). Disconnect from the network to temporarly eliminate DC traffic. (You could also shutdown the AD services, but disconnecting the network cable is ever-so-much easier.) Defragment ALL drives.
2. Restart ONLY the SQL Server service. Obtain this SQL script to Reindex the WSUS Databases.
3. Restart ONLY the Update Services service. Attempt the Server Cleanup Wizard again. Run it in two passes. Pass 1 performing everything except remove unused updates. Pass 2 running only remove unused updates.
4. After completion of the Server Cleanup Wizard, reconnect the machine to the network and resume all other services.
5. If you're able to complete #3, secure the services of a well-qualified DBA to determine if there are any misconfigurations in your SQL Server setup that would account for why your WSUS database is 9GB in size -- such as improperly configured autogrowth parameters. Based on the products you're updating and only forty clients, 9GB is about 3x the maximum size I would expect to see in a WSUS database. It's possible this is simply caused by excess unused updates, it's possible it's caused by fragmentation, it's probable it was caused by unnecessary autogrowth of the database due to insufficient update maintenance. You'll want a DBA to assist you in shrinking that database after you successfully run the Database Maintenance and Server Cleanup Wizard.
Lawrence Garvin, M.S., MCITP(x2), MCTS(x5), MCP(x7), MCBMSP
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2009)

EAP-TLS or PEAP authentication failed during SSL handshake to the ACS serve

We are running the LWAPP (2006 wlc's and 1242 AP's) and using the ACS 4.0 for authentication. Our users are
experiencing an issue, where they are successfully authenticated the first time, however as the number of them is increasing, they're starting to drop the connections and being prompted to re-authenticate. At this point, they are not being able to authenticate again.
We're using PEAP for the authentication and Win XP SP2 clients as the supplicants. The error message that we are seeing on the ACS for that controller is "EAP-TLS or PEAP authentication failed during SSL handshake to the ACS server"...Not sure if this error msg is relevant since we have other WLC's that are working OK and still generating the same error msg on the ACS...
Thanks..

Here are some configs you can try:
config advanced eap identity-request-timeout 120
config advanced eap identity-request-retries 20
config advanced eap request-timeout 120
config advanced eap request-retries 20
save config

Messaging Server 3.6 fails to start even though the Administration Server says "Success"

Messaging Server 3.6 fails to start even though the Administration Server says
"Success". There are no entries in the log to help explain what has happened.

Any failure to start Messaging Server via Administration should be analyzed by
starting the server with /etc/NscpMail.

# /etc/NscpMail start
19991219004527:Dispatch:Notification:Network Module (IMAP4-Server) Failed the verify environment test.
Module not Loaded.
Startup Problem:
Problem Gaining Unique Lock
Netscape Messaging Server Exiting!

This error is caused by an inability to create the .netscape.mailID file
inside the top level of the postoffice.

# cd /var/spool/postoffice
# ls -la
total 30
dr-x------ 8 nobody nobody 512 Dec 19 01:06 .
drwxrwxr-x 13 root bin 512 Feb 12 1999 ..
drwx------ 2 nobody nobody 1536 Dec 19 01:04 config
drwx------ 2 nobody nobody 512 Dec 19 01:04 control
drwx------ 3 nobody nobody 512 Dec 19 01:04 deferred
drwx------ 2 nobody nobody 512 Dec 19 01:04 hold
drwx------ 2 nobody nobody 5120 Dec 19 01:04 log
drwx------ 2 nobody nobody 512 Dec 19 01:04 messages
-rw-r--r-- 1 root other 183 Apr 12 1999 sie.conf
-rw-r--r-- 1 root other 6 Dec 19 01:04 socket.dat

NOTE: The "." entry is the same as ls -l /var/spool/postoffice

# chmod u+w .
# /etc/NscpMail start
# ls -la
total 32
drwx------ 8 nobody nobody 512 Dec 19 01:04 .
drwxrwxr-x 13 root bin 512 Feb 12 1999 ..
-rw------- 1 nobody nobody 5 Dec 19 01:04 .netscape.mailID
drwx------ 2 nobody nobody 1536 Dec 19 01:04 config
drwx------ 2 nobody nobody 512 Dec 19 01:04 control
drwx------ 3 nobody nobody 512 Dec 19 01:04 deferred
drwx------ 2 nobody nobody 512 Dec 19 01:04 hold
drwx------ 2 nobody nobody 5120 Dec 19 01:04 log
drwx------ 2 nobody nobody 512 Dec 19 01:04 messages
-rw-r--r-- 1 root other 183 Apr 12 1999 sie.conf
-rw-r--r-- 1 root other 6 Dec 19 01:04 socket.dat

Hi,
Please check if you have disabled the autodisconnect feature of the Server service. On Windows servers it can be configured through the Autodisconnect registry key.
\HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\
CIFS and SMB Timeouts in Windows
http://blogs.msdn.com/b/openspecification/archive/2013/03/19/cifs-and-smb-timeouts-in-windows.aspx
Based on the research, as the open shared folder is in a SMB session, the default timeout for SMB session is 15 minutes. If the SMB session is inactive for 15 minutes the server will send a TCP reset to close the SMB connection. Until the
Autodisconnect timer is reached, the server will send an NBT keep-alive packet every two minutes. If a client or server application is not written to properly handle network delays, it may terminate the session prior to the default timeout
period.
For more detailed information, please refer to the thread below:
Session doesn't close Shared Folder
https://social.technet.microsoft.com/Forums/en-US/54f658c8-3d41-4beb-9a2f-47b054a11b7a/session-doesnt-close-shared-folder?forum=smallbusinessserver
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Adding server in DAG failing with error Error: Cluster API failed: "AddClusterNode() (MaxPercentage=25) failed with 0x800706ba. Error: The RPC server is unavailable

Hi, Below is teh environments
DC: Win 2008 R2 SP1
Exchange Server OS: Win 2012 R2 Std
Exchange : 2013 SP1 Ent
Two Servers with CAS+MB role, already part of one DAG. I am trying to add one new server in existing DAG. The installation of exchange 2013 competed successfully. However when i am adding it to the existing DAG, the below error is coming. Please help
to solve the issue. Thanks in advance.
A server-side database availability group administrative operation failed with a transient error. Please try the operation again. Error: An error occurred while attempting a cluster operation. Error: Cluster API failed: "AddClusterNode() (MaxPercentage=25)
failed with 0x800706ba. Error: The RPC server is unavailable" [Server: cluster owner FQDN]
Manu

Hi Manu,
As Deepak mentioned, please try to enable IPv6 on all member servers first.
Based on my research, In Microsoft Exchange Server 2013, IPv6 is supported only when IPv4 is also installed and enabled. If Exchange 2013 is deployed in this configuration, and the network supports IPv4 and IPv6, all Exchange servers can send data to and
receive data from devices, servers, and clients that use IPv6 addresses.
Please also configure or disable Firewall to allow the connection.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

Error 1047 in LabVIEW 8.2: LabVIEW failed to send variable to the script server. Server:""

I am working with the evaluation version of labVIEW as well and I have run into another error. I am using a MATLAB script node within a for loop and attempting to pass the for loop counter variable into the script. When I run the code it brings up a 1047 error and says "LabVIEW failed to send variable to the script server. Server:"" ". I looked up the error online which seems to have roots in a failed auto initialization of MATLAB. Is there something that I can do in labVIEW to fix the problem or is it strictly a MATLAB error?
I really appreciate your help.

I'm using Labview 8.6 and Matlab 7.9 2009b on windows 7 (64bit)
when I tried to open the Lorenz Diff Eq.vi....it woes not work and gives the error
Error 1047 occurred at LabVIEW: LabVIEW failed to send variable to the script server. Server:"" in MATLAB script node - Lorenz Diff Eq.vi
I think there is no inital communication for opening the MATLAB server
any can help?
A.Hakim

Setting SSDT on the build server

I’m having issues building the database project on the build server.
I’m trying to setup our build server. Our application was initial created using VS 2010 and then slowly we migrated to VS 2013. However the path inside all the individual project file (.csproj, .sqlproj) & build project file (.proj)
is still V10.0. Based on research I did, it looks like I have to install Visual Studio 2010 on the build server in order SSDT to build.
So I installed VS 2010 Professional on build server, then trying to install SSDT for 2010. However Microsoft no longer supports SSDT for VS 2010. Website says
“We are no longer updating SSDT for Visual Studio 2010. Projects and DACPACs are fully compatible across shells. Please download the toolset for VS2012 or VS2013 using the links above for continued updates”
So I installed SSDT for VS 2012.
However it installed the SSDT into C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0
folder.
But the build is looking into C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0
How do I solve this issue? Where can I find SSDT for VS 2010.

Hi lax4u,
Does passing the argument /p:VisualStudioVersion=11.0 to MSBuild when building on the build server help?

Single User Outlook 2013 new setup fails on "Logging on to the mail server"

Auto-discover works fine, Establishing network connection - green check, Searching for the user - green check, then on login it fails with "The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this
action". This issue just started happening for a single user, and follows the user to any PC we try to setup Outlook on, so it definitely seems to be an issue with her specific mailbox or account. OWA does work, and she's able to sign in
and check her mail here.
Is there any kind of maintenance that can be ran to fix this? Any idea's why should would have been working fine for months, and then this issue come up out of the blue?
RCA shows:
The address book Bind operation failed with status -2147467259. NSPI Status: 2147500037

Thanks Hinte, Checked this after the AppPool recycle and after she worked, they are both set to False. Would recycling an AppPool have been able to change this setting? Or could there have been some kind of Throttling that triggered
a "true" here?
That won't affect those values. It is enabled by default, but I have seen users disable it for various reasons on older versions of Exchange (2010/2007).
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

HT1245 it is failing to sync contact because the sync server is not available. What does that mean??

I am not avble to sync my Iphone. I just got a new iphone and am trying to sync my old one so can activate the new 4s. There is a warning message that says sync failed because server not available.

Try:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

The timesheet creation failed, because of problems with the project server or with data validations, such as resources not being valid work resources or users

One of the user having the issue in Project Server 2007, while cratating the timesheet the mentioned error have been populated in the screen
Please help me to resolve the issue

It would be helpful to see the corresponding ULS entry.Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG

Error 1047 w/ Labview 8.20: Labview failed to send variable to the script server

Hello,
I have found similar questions, but with previous versions of Labview and Matlab and no resolution. Could someone please enlighten me? I'm using Matlab 7.4.0 (2007a) and Labview 8.2 and this is the error I get when I try to input a 1D array into a matlab script node.
Thank you much.
Message Edited by johng3 on 02-11-2008 01:20 PM

Hello Johng3,
Regarding error 1048 you are getting, please refer to this knowledgebase, which explains why this happens.
Eli S.
National Instruments
Applications Engineer

Had to replace a WSUS server that went south, now SCCM WSUS not pulling updates

We had a 08 R2 machine serving as our WSUS server, it failed a few weeks ago and had to be replaced and was replaced with a VM 2012 R2 box. I removed the older server from SCCM, proceeded to set up the new server (it has the same name as the old on)
and re-add it back to sccm. I thought everything was okay but when I checked the logs yesterday I noticed that it wasn't syncing with the new server. The WCM.log file:
Successfully connected to server: wsus-01.friver.local, port: 8530, useSSL: False   3/26/2014 8:51:37 AM   3648 (0x0E40)
Successfully refreshed categories from WSUS server   3/26/2014 8:51:45 AM   3648 (0x0E40)
Attempting connection to WSUS server: wsus-01.friver.local, port: 8530, useSSL: False   3/26/2014 8:51:50 AM   3648 (0x0E40)
Successfully connected to server: wsus-01.friver.local, port: 8530, useSSL: False   3/26/2014 8:51:50 AM   3648 (0x0E40)
Category Company:94d731de-22a6-4458-dc4d-b5267de026fc (Adobe Systems, Inc.) not found on WSUS   3/26/2014 8:51:50 AM   3648 (0x0E40)
Starting WSUS category sync from upstream...   3/26/2014 8:51:50 AM   3648 (0x0E40)
Microsoft.SystemsManagementServer.WSUS.WSUSMSPException: WSUS sync failed with UssNotFound: ~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.IsSyncRunning()   3/26/2014 8:51:55 AM   3648 (0x0E40)
Failed to set Subscriptions on the WSUS Server. Error:(-2146233088)Unknown error 0x80131500   3/26/2014 8:51:55 AM   3648 (0x0E40)
STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=Cor-sccm-02.FRIVER.LOCAL SITE=FR1 PID=7624 TID=3648 GMTDATE=Wed Mar 26 12:51:55.295 2014 ISTR0="wsus-01.friver.local" ISTR1=""
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0   3/26/2014 8:51:55 AM   3648 (0x0E40)
Waiting for changes for 60 minutes   3/26/2014 8:51:55 AM   3648 (0x0E40)
the wsyncmgr.log doens't have anything in it at the moment other than sync failed and it will retry in 60 minutes, after the next attempt I will post more from there. Did I miss a step somewhere or was there an additional step I should have taken to
clean out the old server from SCCM that I'm not aware of?

I did, still no go. Here is the entry from WCM.log
Starting WSUS category sync from upstream...   3/26/2014 12:51:50 PM   3648 (0x0E40)
Microsoft.SystemsManagementServer.WSUS.WSUSMSPException: WSUS sync failed with UssNotFound: ~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.IsSyncRunning()   3/26/2014 12:51:55 PM   3648 (0x0E40)
Failed to set Subscriptions on the WSUS Server. Error:(-2146233088)Unknown error 0x80131500   3/26/2014 12:51:55 PM   3648 (0x0E40)
STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=Cor-sccm-02.FRIVER.LOCAL SITE=FR1 PID=7624 TID=3648 GMTDATE=Wed Mar 26 16:51:55.707 2014 ISTR0="wsus-01.friver.local" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6=""
ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0   3/26/2014 12:51:55 PM   3648 (0x0E40)
Waiting for changes for 60 minutes   3/26/2014 12:51:55 PM   3648 (0x0E40)
Trigger event array index 0 ended.   3/26/2014 1:00:04 PM   3648 (0x0E40)
SCF change notification triggered.   3/26/2014 1:00:09 PM   3648 (0x0E40)
Populating config from SCF   3/26/2014 1:00:09 PM   3648 (0x0E40)
From wsyncmgr.log
Starting Sync   3/26/2014 3:34:14 PM   4992 (0x1380)
Performing sync on local request   3/26/2014 3:34:14 PM   4992 (0x1380)
Read SUPs from SCF for Cor-sccm-02.FRIVER.LOCAL   3/26/2014 3:34:14 PM   4992 (0x1380)
Found 1 SUPs   3/26/2014 3:34:14 PM   4992 (0x1380)
Found active SUP wsus-01.friver.local from SCF File.   3/26/2014 3:34:14 PM   4992 (0x1380)
Sync failed: WSUS update source not found on site FR1. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource   3/26/2014 3:34:14 PM   4992 (0x1380)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=Cor-sccm-02.FRIVER.LOCAL SITE=FR1 PID=7624 TID=4992 GMTDATE=Wed Mar 26 19:34:14.721 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site FR1. Please refer
to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0   3/26/2014 3:34:14 PM   4992 (0x1380)
Sync failed. Will retry in 60 minutes   3/26/2014 3:34:14 PM   4992 (0x1380)
Setting sync alert to active state on site FR1   3/26/2014 3:34:14 PM   4992 (0x1380)
Sync time: 0d00h00m00s   3/26/2014 3:34:14 PM   4992 (0x1380)

Failed to set Subscriptions on the WSUS Server

Similar Messages

Maybe you are looking for