Failing to start LXDE (and X) on MSI Wind U100

I am trying to install Arch on a MSI WInd U100, but have troubles getting LXDE to run.
X can start by executing startx. But as soon as i copy the /etc/skel/.xinitrc file to ~/.xinitrc, it fails to start. Even without exec startlxde.
I have installed the xf86-video-intel driver.
Last two lines from log file:
(EE) intel(0): Failed to set backlight acpi_video0 for output LVDS1 to brightness level 0, disabling
(EE) Server terminated successfully (0). Closing log file.
Last edited by havkajak (2014-08-03 09:07:36)

#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice

Similar Messages

Recommended Kernel For The MSI Wind U100

Hi folks,
I am currently running the -ck kernel, the same as I have on my laptop, but I am currently thinking that a more specialised kernel may give me better performance on my MSI Wind U100 netbook. I reckon that the Aspire One kernel may fit the bill because of the similar hardware, but I wanted to hear about anyone's experience with this kernel (or any other) on the Wind. Recommendations welcome!
Cheers,
scott

To the nutshell: Seems we understand, great
Regarding the defaults:
Well most of the kernel options have a little help text associated that *may* give an idea what it's about... But I guess you rather look for a good place to start.
You could either use the config of your running kernel: look inside /proc/config.gz. Or you could start with the one that comes with the AUR. If you already run the -ck kernel now, you unknowingly used the config it provides and the above will be the same of course.
I still recommend kernel26-ice with enabled -bfs patch but I guess -ck will in the end use the same scheduler...? Whatever
So in -ck look for this section:
# get kernel version
make prepare
# load configuration
# Configure the kernel. Replace the line below with one of your choice.
#make menuconfig # CLI menu for configuration
#make xconfig # X-based configuration
#make oldconfig # using old config from previous kernel version
# ... or manually edit .config
# stop here
# this is useful to configure the kernel
#msg "Stopping build"
#return 1
Activate "load configuration" (hopefully that uses /proc/config.gz automatically) and either "menuconfig" or "xconfig" so you later get a menu/gui to edit that file.
The commented "stop here" part irritates me, though... I would think the msg and return 1 line should be uncommented as well but - not sure at the moment. Try it, you will see if it stops building while you see the config. It should do...
In -ice-kernel you'd look for
### User/Environment defined variables
bfs_scheduler=${bfs_scheduler:-0}
enable_fastboot=${enable_fastboot:-0}
keep_source_code=${keep_source_code:-0}
menuconfig=${menuconfig:-0}
realtime_patch=${realtime_patch:-0}
use_config_gz=${use_config_gz:-0}
enable_reiser4=${enable_reiser4:-0}
and replace "0" with "1" for bfs_scheduler, menuconfig and use_config_gz and maybe also enable_fastboot.
(optionally look for something like this:
# configure kernel
if [ "$menuconfig" = "1" ]; then
make menuconfig ## <-- this one
fi
yes "" | make config
and replace the "make menuconfig" with "make xconfig"or whatever. I prefer gconfig)
Save the PKGBUILD and run makepkg
After some downloading, extracting and patching you should finally SEE the menu/gui. Tada.
To make sure you can now load the config file you saved above but it *should* allready be done...
Now look at "General Setup->Local Version". The -ck kernel will most likely say -ck there, standard arch says -ARCH. It may be wise to give your kernel a uniqe name so you don't overwrite your working one... (Remember to add an entry for it in /boot/grub/menu.lst to be able to start it later.) You will need to take care of updates manually then, though.
And at last: "Processor-type and features" seems to be the most interesting region for you
(For the other options - well there are LOTS of them. Some will also influence performance.... So I guess best advice is take your time and only fiddle with options you understand.)
If you are done save the setting and exit the program. Now "the real work" should start. If you do it on the netbook - you will probably need SOME patience for that too!
When it's done install the kernel with pacman -U </patch/to/directory/where/I/just/build/the/kernel.tar.gz
If you changed menu.lst you can select YOUR kernel on next boot and try if it does what it should.
Good look
Oh and you may need to (re)install some modules for graphic cards, wifi or whatever for this kernel too...
[Edit: Me needs antiverbose-switch! just wanted to give a *short* answer:) ]
Last edited by MAroco (2010-02-25 21:14:25)

MSI Wind U100 xorg.conf

Could someone post their xorg.conf of a working MSI Wind U100?
I have no mousepad (but keyboard and a USB mouse works)
Thanks

I don't have an xorg.conf file and everything's working here.
For the touchpad install xf86-input-synaptics.

Frustrated beyond belief. Trying to download the new Itunes 11 version so I can sync my phone. It goes thru the whole process, says I was successful and then I get a message - "Apple Mobile Device Failed to start----retry, and retry, same message.

On my desk computer, I tried to download the new Itunes 11 version. I had Itunes 10. It goes thru the whole process and then says "Apple Mobilve Devide failed to start, Verify you have sufficient privileges to start service. I hit retry and then I get Installation successful followed by error 126. I can not enter Itunes at all now. If I click on the former icon it says MSVCR80.dll for error. I can't even figure out how to ask for support on this website. I have several devices linked to Itunes and need to sync.

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Msi wind u100 plus overclocking

Is it possible to flash a wind u100+ with a u100 bios to enable 24% overclock?
At present only 15% is avaliable
thanks

Quote from: Svet on 23-June-10, 06:30:45
Hello,
The request can be proceed on donation https://forum-en.msi.com/index.php?topic=134259.0
Once done, the request will be e-mailed to you [up to 24 hours max]
Best Wishes,
Svet
Thank u svet i will buy u a few beers now that my paypal is set up
thank u!

Managed Server failed to start(oim_server1 and soa_server1) in weblogic

Hi All,
Following upgrade guide is getting followed for OIM version upgrade from 9.1.0.2 to 11g.
http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10129/upgrade_oim.htm
After performing step '13.8 Task 6: Start the WebLogic Administration Server'
Following steps were done
1. Started weblogic administrator server
E:\Oracle_11g\middleware_home\user_projects\domains\base_domain\bin>startWebLogic.cmd
2. Opened the weblogic console (http://localhost:7001/console/login/LoginForm.jsp)
3. Assigning listen address (IP address of server) to both server OIM_SERVER1 and SOA_SERVER1.
4. Created two clusters OIM_CLUSTER and SOA_CLUSTER
5. Added AdminServer and OIM_SERVER1 to cluster OIM_CLUSTER
6. Added soa_server1 to cluster SOA_CLUSTER
7. Created machine with hostname of server
8. Added all the server to newly created machine
9. Started node manager with following command
E:\Oracle_11g\middleware_home\wlserver_10.3\server\bin>startNodeManager.cmd
10. checked node manager status, it is reachable.
Now when I am going for starting OIM_SERVER1, it is getting failed and state is showing Admin.
When I am going to start soa_server1, it is getting failed.

Nishith,
Thaks for our help.
Did you mean following ?
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
K:\>cd E:\Oracle_11g\middleware_home\user_projects\domains\base_domain\bin
K:\>e:
E:\Oracle_11g\middleware_home\user_projects\domains\base_domain\bin>startManaged
WebLogic.cmd
Need to set SERVER_NAME and ADMIN_URL environment variables or specify
them in command line:
Usage: startManagedWebLogic.cmd SERVER_NAME {ADMIN_URL}
for example:
startManagedWebLogic.cmd managedserver1 http://mapidmapn01:7001
E:\Oracle_11g\middleware_home\user_projects\domains\base_domain\bin>startManaged
WebLogic.cmd oim_server1 http://localhost:7001/console
** Setting up SOA specific environment for win...
PATH=E:\ORACLE~2\MIDDLE~1\patch_wls1036\profiles\default\native;E:\ORACLE~2\MIDD
LE~1\patch_ocp371\profiles\default\native;E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server
\native\win\x64;E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\bin;E:\ORACLE~2\MIDDLE~1\
modules\ORGAPA~1.1\bin;E:\Java\JDK16~1.0_3\jre\bin;E:\Java\JDK16~1.0_3\bin;E:\Or
acle\product\10.2.0\client_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\Syste
m32\Wbem;C:\Program Files (x86)\Windows Imaging\;E:\Java\jdk1.6.0_32\bin;C:\Wind
ows\sysWOW64;E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8;E:\O
racle_11g\middleware_home\Oracle_SOA1\soa\thirdparty\edifecs\XEngine\bin
USER_MEM_ARGS=-Xms768m -Xmx1536m -XX:PermSize=256m -XX:MaxPermSize=512m
JAVA_OPTIONS=-Dweblogic.security.SSL.trustedCAKeyStore="E:\Oracle_11g\middleware
_home\wlserver_10.3\server\lib\cacerts" -Xverify:none
** End SOA Specific environment setup for win.
JAVA Memory arguments: -Xms768m -Xmx1536m -XX:PermSize=256m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar
;E:\Oracle_11g\middleware_home\Oracle_SOA1\soa\modules\user-patch.jar;E:\Oracle_
11g\middleware_home\Oracle_SOA1\soa\modules\soa-startup.jar;;E:\ORACLE~2\MIDDLE~
1\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\OR
ACLE~2\MIDDLE~1\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_pa
tch.jar;E:\Java\JDK16~1.0_3\lib\tools.jar;E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server
\lib\weblogic_sp.jar;E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;E:\
ORACLE~2\MIDDLE~1\modules\features\weblogic.server.modules_10.3.6.0.jar;E:\ORACL
E~2\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;E:\ORACLE~2\MIDDLE~1\modules\
ORGAPA~1.1/lib/ant-all.jar;E:\ORACLE~2\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-con
trib.jar;E:\ORACLE~2\MIDDLE~1\ORACLE~1\soa\modules\commons-cli-1.1.jar;E:\ORACLE
~2\MIDDLE~1\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;E:\Or
acle_11g\middleware_home\Oracle_SOA1\soa\modules\oracle.soa.common.adapters_11.1
.1\oracle.soa.common.adapters.jar;E:\Oracle_11g\middleware_home\Oracle_SOA1\comm
unications\modules\usermessaging-config_11.1.1.jar;E:\ORACLE~2\MIDDLE~1\ORACLE~1
\modules\oracle.xdk_11.1.0\xsu12.jar;E:\ORACLE~2\MIDDLE~1\modules\features\weblo
gic.server.modules.xquery_10.3.1.0.jar;E:\Oracle_11g\middleware_home\Oracle_SOA1
\soa\modules\db2jcc4.jar;E:\ORACLE~2\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\s
oa-infra;E:\Oracle_11g\middleware_home\Oracle_SOA1\soa\modules\fabric-url-handle
r_11.1.1.jar;E:\Oracle_11g\middleware_home\Oracle_SOA1\soa\modules\quartz-all-1.
6.5.jar;E:\Oracle_11g\middleware_home\Oracle_SOA1\soa\modules\oracle.soa.fabric_
11.1.1\oracle.soa.fabric.jar;E:\Oracle_11g\middleware_home\Oracle_SOA1\soa\modul
es\oracle.soa.fabric_11.1.1\fabric-runtime-ext-wls.jar;E:\Oracle_11g\middleware_
home\Oracle_SOA1\soa\modules\oracle.soa.adapter_11.1.1\oracle.soa.adapter.jar;E:
\Oracle_11g\middleware_home\Oracle_SOA1\soa\modules\oracle.soa.b2b_11.1.1\oracle
.soa.b2b.jar;E:\Oracle_11g\middleware_home\Oracle_IDM1\server\lib\oim-manifest.j
ar;E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.owasp_11.1.1\ESAPI-2.0-rc4.jar;E
:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.owasp_11.1.1\antisamy-bin.1.3.jar;E:
\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.owasp_11.1.1\commons-configuration-1.
5.jar;E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.owasp_11.1.1\commons-fileuplo
ad-1.2.jar;E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.owasp_11.1.1\commons-lan
g-2.3.jar;E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.owasp_11.1.1\nekohtml-0.9
.5.jar;E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.owasp_11.1.1\xercesImpl-2.9.
1.jar;E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;E:\ORACLE~
2\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;E:\ORACLE~2\MIDDLE~1\WLSE
RV~1.3\server\lib\xqrl.jar
PATH=E:\ORACLE~2\MIDDLE~1\patch_wls1036\profiles\default\native;E:\ORACLE~2\MIDD
LE~1\patch_ocp371\profiles\default\native;E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server
\native\win\x64;E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\bin;E:\ORACLE~2\MIDDLE~1\
modules\ORGAPA~1.1\bin;E:\Java\JDK16~1.0_3\jre\bin;E:\Java\JDK16~1.0_3\bin;E:\Or
acle\product\10.2.0\client_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\Syste
m32\Wbem;C:\Program Files (x86)\Windows Imaging\;E:\Java\jdk1.6.0_32\bin;C:\Wind
ows\sysWOW64;E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8;E:\O
racle_11g\middleware_home\Oracle_SOA1\soa\thirdparty\edifecs\XEngine\bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_32"
Java(TM) SE Runtime Environment (build 1.6.0_32-b05)
Java HotSpot(TM) 64-Bit Server VM (build 20.7-b02, mixed mode)
Starting WLS with line:
E:\Java\JDK16~1.0_3\bin\java -client -Xms768m -Xmx1536m -XX:PermSize=256m -XX:
MaxPermSize=512m -Dweblogic.Name=oim_server1 -Djava.security.policy=E:\ORACLE~2\
MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.security.SSL.trustedCA
KeyStore="E:\Oracle_11g\middleware_home\wlserver_10.3\server\lib\cacerts" -Xver
ify:none -da -Dplatform.home=E:\ORACLE~2\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\ORAC
LE~2\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\
server -Dcommon.components.home=E:\ORACLE~2\MIDDLE~1\ORACLE~1 -Djrf.version=11.
1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger
-Ddomain.home=E:\ORACLE~2\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Djrockit.optfile=
E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Dor
acle.server.config.dir=E:\ORACLE~2\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMW
CON~1\servers\oim_server1 -Doracle.domain.config.dir=E:\ORACLE~2\MIDDLE~1\USER_P
~1\domains\BASE_D~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=E:\ORACLE~2\MIDD
LE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=E:\
ORACLE~2\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\arisidprovider -Dora
cle.security.jps.config=E:\ORACLE~2\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\fm
wconfig\jps-config.xml -Doracle.deployed.app.dir=E:\ORACLE~2\MIDDLE~1\USER_P~1\d
omains\BASE_D~1\servers\oim_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -D
weblogic.alternateTypesDirectory=E:\Oracle_11g\middleware_home\Oracle_IDM1\serve
r\loginmodule\wls,E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,E:
\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.ha
ndler.pkgs=oracle.mds.net.protocol"|"oracle.fabric.common.classloaderurl.handler
"|"oracle.fabric.common.uddiurl.handler"|"oracle.bpm.io.fs.protocol -Dweblogic.
jdbc.remoteEnabled=false -DXL.HomeDir=E:\Oracle_11g\middleware_home\Oracle_IDM1
\server -Djava.security.auth.login.config=E:\Oracle_11g\middleware_home\Oracle_
IDM1\server\config\authwl.conf -Dorg.owasp.esapi.resources=E:\Oracle_11g\middle
ware_home\Oracle_IDM1\server\apps\oim.ear\APP-INF\classes -da:org.apache.xmlbea
ns... -Dsoa.archives.dir=E:\Oracle_11g\middleware_home\Oracle_SOA1\soa -Dsoa.ora
cle.home=E:\Oracle_11g\middleware_home\Oracle_SOA1 -Dsoa.instance.home=E:\ORACLE
~2\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Dtangosol.coherence.clusteraddress=227.7.
7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.x
ml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dweblogic.tr
ansaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Dj
avax.net.ssl.trustStore=E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks
-Dem.oracle.home=E:\Oracle_11g\middleware_home\oracle_common -Djava.awt.headles
s=true -Dums.oracle.home=E:\Oracle_11g\middleware_home\Oracle_SOA1 -Dweblogic.ma
nagement.discover=false -Dweblogic.management.server=http://localhost:7001/conso
le -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=fa
lse -Dweblogic.ext.dirs=E:\ORACLE~2\MIDDLE~1\patch_wls1036\profiles\default\syse
xt_manifest_classpath;E:\ORACLE~2\MIDDLE~1\patch_ocp371\profiles\default\sysext_
manifest_classpath weblogic.Server
Error occurred during initialization of VM
Could not reserve enough space for object heap
E:\Oracle_11g\middleware_home\user_projects\domains\base_domain\bin>

TABLET WINDPAD ENJOY 10 START UP AND KEEP SHOWING MSI LOGO

Hello,
I got a tablet msi enjoy 10 plus.
when i turn on the tablet, I have an MSI logo screen with "fun for life" and the screen just keep like that until it shut down by itself due to low battery. the tablet also heating up at the back of it and i can't turn it off or do anything unless wait it shut down when the battery is out or by reset it by the reset hole at the back. but when i turn it on again, same thing happen.
How to solve this problem? PLEASE HELP ME

I think it is wonderful to follow.

Failing to start Reporting and Analysis Framework service

Hello Everyone,
We recently had a hardware failure and we could not get R&A framework service up. The diagnostic log says -
No agent is configured from HIT registry, please make sure the registry is configured properly
What does this mean? Any idea as to how I can resolve this?
Thanks in advance,
AceBase

Has anything changed since the hardware failure such as hostname, dns, IP resolution?
Cheers
John
http://john-goodwin.blogspot.com/

MOVED: Reformat msi wind u100

This topic has been moved to MSI Notebook.
https://forum-en.msi.com/index.php?topic=138294.0

I don't have an xorg.conf file and everything's working here.
For the touchpad install xf86-input-synaptics.

MSI Wind U100 won't boot or POST!

My CPU fan was getting noisy so i decided to take the back off and blow out the dust. Before i put it back together i decided to plug in the battery and turn it on with the back cover off to make sure i fixed the noisy fan. That's when it happened. The blue star lights up and that's it. Blank screen, no POST, nothing! Hmm, i thought maybe there was a case sensor or something so i pulled the battery, put the cover back on and still nothing. Oh yeah, the CPU Fan spins for 2 seconds, much quieter now.
I have also tried... removing the battery and power cord and let sit 10 minutes, power by cord with battery removed, removing little BIOS motherboard battery, removing HDD, re-seating all connectors from LCD screen, and the usual cursing.
Somebody please tell me how to fix this thing.

I have the exact same issue...only one blue light and power cycles when you try to stop it. System will not post.
New board, CPU, and RAM. video card from a working system.
Already tried reseating CPU and fan...already tried moving ram to second (black) slot.
Is this board DOA???
Intel Core i5 2500K Quad Core Unlocked Processor LGA1155 3.3GHZ Sandy Bridge 6MB
MSI P67A-C43 (B3) P67 ATX LGA1155 DDR3 1PCI-E16 3PCI-E 3PCI SATA3 USB3.0 Audio GBLAN Motherboard
Corsair XMS CMX4GX3M1A1600C9 4GB 1X4GB DDR3-1600 CL9-9-9-24 DIMM Memory Module
650W Corsair PSU
ATI Radeon 4870 HD
Falcon II SSD

MSI WIND U100 - processor voltage at 0.9V

Hi,
I made a ''desktop'' PC out of my old wind and I'm having trouble with the BIOS overclocking. I'm trying to get the 24% overclock, but the system is always crashing. Max that I can get is 8% overclock. The problem might be the voltage. It runs at 0.9V (800 MHz) or 0.925V (1600 MHz). I've seen some cpu-z screenshots and most of the N270's are running at 1.275V. Can I somehow change the voltage? Or if someone has an N270 could you check YOUR voltage?
Thanks

you can't change the voltage for this unit
OCing is not guaranteed its based on luck and draws
some units can be OCed more than another, its individual
for the exact case i was able to play at 2 x U100 identical
one can OC to 8% max, other can be OCed to 24% fine
other factors is your RAM, when you apply OC,
memory is also OCed slightly along with the CPU,
which can prevent the higher OCing
do you use build in memory in the unit or
do you also have add-on memory stick installed and using them both?

MSI Wind U100 Plus, 24% Request

Hello Svet
excuse for my low English.
Can you change include value of DOC 8% <-> 24% ?
Because I use U100+. I can not choose 24% of DOC menu in BIOS.
Does the sum total of BIOS: it in the same?
Is it difficult?
Thank you

Hello,
The request can be proceed on donation https://forum-en.msi.com/index.php?topic=134259.0
Once done, the request will be e-mailed to you [up to 24 hours max]
Best Wishes,
Svet

MSI Wind U100 question - Newby

Hi
I just purchased a new U100 with the Intel 270. The BIOS is the ENO11IMS Ver.10D. In the BIOS I can change the the overclocking to 8/15/24%. After booting XP I toggle F10, The turbo icon shows on screen. But I cannot tell if it is OCing. I downloaded CPUz but it shows Specification as 1.6Ghz and core speed as approximately 926mhz. The power on button changes from blue to orange, but other than that i have no idea if it is OCing.
Another question. The machine was getting really hot. I downloaded speedfan and the temps Temp1/Core 0/Core 1 were all in the 70's (Celsius) and I think Temp 1 broke 80 some. I engaged the auto fan speed in Speedfan and after a while the fan came on and the temps fell rapidly right before my eyes and settled in the 30's and the computer went from hot to luke warm. But it seems it took a 3rd party software to get the fan to work at all.
Can anyone give me some insight into these.
Thanks

Quote
I downloaded CPUz but it shows Specification as 1.6Ghz and core speed as approximately 926mhz. The power on button changes from blue to orange, but other than that i have no idea if it is OCing.
Yes, you're overclocking. The CPU only runs at full speed when its under full load (to save power). Normally when idle, the CPU speed drops to 800mhz, so the fact that yours is idling at 926mhz means the OC is active. Put the CPU under heavy load, using something like SuperPi or Prime95, and you'll see the CPU speed will exceed 1600mhz.

Failed to start org.freedesktop.Avahi

Every time during boot i see a message:
dbus[725] [system] Failed to activate service 'org.freedesktop.Avahi': timed out
What cause that service failed to start? Why it is trying to be loaded? Should be?
My system is msi wind u100 with arch and recent updates:
Linux msi 3.0-ARCH #1 SMP PREEMPT Sat Aug 6 16:49:00 CEST 2011 i686 Intel(R) Atom(TM) CPU N270 @ 1.60GHz GenuineIntel GNU/Linux
rc.conf content, if it's relevant:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="pl_PL.UTF-8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/Warsaw"
KEYMAP="pl"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(uvcvideo acpi_cpufreq cpufreq_ondemand cpufreq_powersave !ati_remote !lirc_atiusb)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="msi"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng dbus hal crond bluetooth alsa wicd !samba kdm !cups !lircd)
Last edited by bagheera (2011-08-14 08:48:29)

bagheera wrote:
karol wrote:You're still using the old rc.conf setup - why? You're blacklisting modules in rc.conf, even though it doesn't work anymore.
#MOD_BLACKLIST=() #deprecated
It's commented out, so it doesn't matter
I was talking about
MODULES=(uvcvideo acpi_cpufreq cpufreq_ondemand cpufreq_powersave !ati_remote !lirc_atiusb)
http://www.archlinux.org/news/changes-t … cklisting/
Before this change you could
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.

App Server Fails to Start after Installation

Hi,
I've spent a whole day struggling with this, looking through forum discussions and trying out every single suggestion I've come across in the forums. I'm running out of ideas now and really appreciate any help I can get with this problem.
I'm trying to install SJSC2 (also tried with SJSC2u1 with the same outcome) on a new HP notebook (nw9440) running WinXP_sp2. I'm using the default installation done by HP.
My installation path is C:\Java\SunCreator2 (C:\Java\SunCreator2_1 for update 1).
After the installation the App server fails to start up and gives the below error in the server.log.
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d779c9d, pid=5368, tid=5760
# Java VM: Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode)
# Problematic frame:
# V [jvm.dll+0x99c9d]
# An error report file with more information is saved as hs_err_pid5368.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Upon looking at the install.log in the rave_home directory, I noticed the below sequence of errors.
Timeout waiting for domain creator to go to starting state.
Compiler warnings:
line 44: Attribute 'debug-options' outside of element.
line 62: Attribute 'port' outside of element.
line 73: Attribute 'port' outside of element.
line 84: Attribute 'port' outside of element.
line 105: Attribute 'port' outside of element.
line 116: Attribute 'port' outside of element.
line 127: Attribute 'port' outside of element.
line 145: Attribute 'port' outside of element.
line 156: Attribute 'port' outside of element.
CLI156 Could not start the domain creator.
The following script has unexpected output: "C:\Creator2\bin\deploy-ws.bat"
Aug 14, 2006 11:27:33 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:35 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:37 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
The following script has unexpected output: "C:\Creator2\bin\deploy-ejbs.bat"
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI137 Command create-jdbc-connection-pool failed.
CLI137 Command create-jdbc-resource failed.
CLI137 Command create-jdbc-connection-pool failed.
CLI137 Command create-jdbc-resource failed.
Aug 14, 2006 11:27:52 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:53 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:55 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:57 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
I've tried every workaround I've seen in the forums such as installing under different paths (both with spaces and without spaces), cleaning all the temporary files in the Temp directory, renaming the productregistry in the windows system directory. Each time I get the exact same error in the install.log.
I also tried installing the stand alone SUN App Server 8.1_02_2005Q2 as well as 8.2. I don't seem to have any issue with this installation or running of the stand alone server at all on the same machine.
Really appreciate any help I can get. TIA....
rgds,
KC

Hi,
After spending more time looking through the forum, I came across the below thread which has worked in my case (though it was suggested for Sol10x86).
http://forum.sun.com/jive/thread.jspa?threadID=62404&messageID=243113
This is the workaround that worked in my case.
> $ cd <Creator_Home>/SunAppServer8/lib
$ mv processLauncher.xml processLauncher.xml.trayIcon
$ cp processLauncher.xml.bak processLauncher.xml
# If you have a domains/creator/config/domain.xml
$ cd ../bin
$ ./asadmin start-domain creator
This started the app server. After that I was able to start and stop app server within the JSC as well.
Only difference between these two xml files seem to be,
processLauncher.xml.trayicon
<main_class classname="com.sun.rave.tray.RavePEMain"/>
processLauncher.xml
<main_class classname="com.sun.enterprise.server.PEMain"/>
Possibly pointing to a bug in the "com.sun.rave.tray.RavePEMain" class.
Thanks for your suggestions guys... and especially to Marco and Greg.
Rgds,
Kc
Message was edited by:
Kc

Failing to start LXDE (and X) on MSI Wind U100

Similar Messages

Maybe you are looking for