Failover cluster server

We have a 2 node cluster both on 2012, they were both working fine until a restart where one of servers started becoming unresponsive, when connected remotely or directly on the server you could use PowerShell from the server manager window, if you attempted
to press start or click on a desktop icon the system came completely unresponsive, from PowerShell you can open control panel and task manager, and a few other things. eventually we rebuilt the server to save on troubleshooting time. but unfortunately yesterday
we had a power cut and to save UPS power we moved the roles on to one node and powered one off, upon the restart it has the exact same issues. this is the Server that was rebuilt only 3 weeks ago, no updates were done, the node will not
take any roles when using failover cluster manager from the other server which has the accept same configuration.
any ideas? i'm happy to rebuild again but not sure its solving the issue.

Hi,
Above all we recommended to patch your new cluster and see if issue could be fixed.
Here are some recommended updates:
Recommended hotfixes and updates for Windows Server 2012-based failover clusters
http://support.microsoft.com/kb/2784261
See if the issue still exists after applying all these updates - we will need to monitor for some time as the issue may not reoccur immediately when you restart or shutdown a node.
If you have any feedback on our support, please send to [email protected]

Similar Messages

Failover cluster server - File Server role is clustered - Shadow copies do not seem to travel to other node when failing over

Hi,
New to 2012 and implementing a clustered environment for our File Services role. Have got to a point where I have successfully configured the Shadow copy settings.
Have a large (15tb) disk. S:
Have a VSS drive (volume shadow copy drive) V:
Have successfully configured through Windows Explorer the Shadow copy settings.
Created dependencies in Failcover Cluster Server console whereby S: depends on V:
However, when I failover the resource and browse the Client Access Point share there are no entries under the "Previous Versions" tab.
When I visit the S: drive in windows explorer and open the Shadow copy dialogue box, there are entries showing the times and dates of the shadow copies ran when on the original node. So the disk knows about the shadow copies that were ran on the
original node but the "previous versions" tab has no entries to display.
This is in a 2012 server (NOT R2 version).
Can anyone explain what might be the reason? Do I have an "issue" or is this by design?
All help apprecieated!
Kathy
Kathleen Hayhurst Senior IT Support Analyst

Hi,
Please first check the requirements in following article:
Using Shadow Copies of Shared Folders in a server cluster
http://technet.microsoft.com/en-us/library/cc779378(v=ws.10).aspx
Cluster-managed shadow copies can only be created in a single quorum device cluster on a disk with a Physical Disk resource. In a single node cluster or majority node set cluster without a shared cluster disk, shadow copies can only be created and managed
locally.
You cannot enable Shadow Copies of Shared Folders for the quorum resource, although you can enable Shadow Copies of Shared Folders for a File Share resource.
The recurring scheduled task that generates volume shadow copies must run on the same node that currently owns the storage volume.
The cluster resource that manages the scheduled task must be able to fail over with the Physical Disk resource that manages the storage volume.
If you have any feedback on our support, please send to [email protected]

SSL Cert for 2008 R2 Reporting Services that is installed on a Failover Cluster - server address mismatch?

I utilized the idea from
http://www.mssqltips.com/sqlservertip/2778/how-to-add-reporting-services-to-an-existing-sql-server-clustered-instance/ to install 2008 R2 Reporting Services on a new Clustered SQL instance. In short, create the new Clustered SQL instance on Node1,
installing Reporting Services with it. Then on Node2, Add a Failover Cluster Node (without choosing Reporting Services); following that up with starting the SQL setup.exe with a cmd to bypass a check so that I can then install the Reporting Services
feature on Node2. It points out using the SQL Cluster Network name for connecting to Reporting Services.
I verified upon failover that I could still access the Reports and ReportServer URLs. However, when wanting to add an SSL certificate to the RS configuration, I run into the warning of "mismatched address - the security certificate presented by
this website was issued for a different website's address", where I can continue and get to the Reports or ReportManager URLs.
I played with different certs (internal CA created) and SANs and other things, but I still get this error with the cert. The Reports URL, for example, is <a href="https:///Reports">https://<SQLClusterNetworkName>/Reports, and the
cert has a CN and Friendly Name of SQLClusterNetworkName (with SAN of DNS: SQLClusterNetworkName.<domain>), but the error still happens.
What am I missing to eliminate the mismatched address warning when using the SQLClusterNetworkName as the base of the URLs?

I got it working by using the FQDN as the common name on the SSL cert, with FQDN in RS URLs.

Configuring Failover Cluster Server Share as a Distribution Point

Hello and thanks for this helpful forum!
I am trying to configure a server share as a Distribution Point and am running into problems. I am running SCCM R2 on Server 2008. I am trying to use a clustered share coming from 2008 R2 Failover Cluster.
I have been trying to get this working for the better part of 2 days now, and I have successfully created a Distribution Point to another 2008 Server (non-R2) by simply using the site system (not the server share).
When I try to use the server share option, I keep receiving an error with Message ID 4701 stating that the SMS Site System Status Summarizer cannot access storage object
\\servername\sharename$ on site system
\\servername\sharename$
The operating system reported error 2147942467: The network name cannot be found.
The server share is defined as a site system as
\\servername\sharename$
I am trying to create a "Packages" directory under it, so I'm using the option "Share the distribution folder" under the Data Access tab of the Package.
In addition, I have given local admin rights to the site server on both nodes of the cluster. I have given the site server modify rights to the share and NTFS permissions. I have given Authenticated Users Read access to the share and NTFS.
As I mentioned, I can take another server and define a Site System as a DP and everything will work properly. I am still missing something though regarding using a Server Share.
Thanks so much in advance for your assistance.

Hi,
No DP on NLBs:
http://technet.microsoft.com/en-us/library/bb735883.aspx
Yes, but that is NOT a failover file cluster. Is there a workaround? It seems silly to have to stand up an additional server for this. It also seems odd that the forthcoming version of SCCM would not have some support for failover clustering which was a HUGE
improvement over the previous clustering solutions from MS.Jeffrey S. Patton Assistant Director of IT School of Engineering Computing Services University of Kansas 1520 West 15th Street Lawrence, KS. 66045-7621

Destroying/Re-creating a Failover Cluster - Server 2012

Hi all,
Some background:
We have a 4-node cluster hosting our Hyper-V environment, and for some or other reason we keep having issues where nodes will just become unresponsive, with the logs indicating an issue on the cluster.
Short of destroying the cluster, we've tried everything to resolve this, i.e. remove and re-install Hyper-V and Failover Clustering, checked Windows updates, double-checked the configuration on the hardware, etc.
Now, my question:
If I destroy a cluster through cluster manager, and then re-create it, adding back the CSV storage, will the "new" cluster pick up that there are Hyper-V servers in those CSVs and recover those roles? Is there a way to back up and restore the existing
roles prior to destroying the cluster?
Thanks in advance for any guidance.
Sebastian

Hi,
Base on my experience, if you want to remove the cluster you must remove all the cluster resource first, for Hyper-V roles you must export all the vm to the new location then
do the cluster remove action.
The similar thread:
Does the destroy cluster option affect the guests running on the hyper-v hosts?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/aab6d54c-1220-42fb-b4f6-c0b6b1583730/does-the-destroy-cluster-option-affect-the-guests-running-on-the-hyperv-hosts?forum=winserverhyperv
More information:
Deleting a Cluster resource? Do it the supported way
http://blogs.technet.com/b/askcore/archive/2010/01/11/deleting-a-cluster-resource-do-it-the-supported-way.aspx
Remove-Cluster
http://technet.microsoft.com/en-us/library/hh847273.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SQL Server Failover Cluster Questions

Dear All,
            I am building a two-node failover cluster on SQL Server 2012 SP1 (inside Hyper-V as a Guest Cluster) and want clarification on few things that I am facing.
1.  I am receiving MSDTC Warning. I can go ahead and create the cluster, but want to understand whether this MSDTC is to be configured as a role on the cluster or not. I plan to run SCVMM, SCOM, Orchestrator and Windows Azure Pack Databases
and Reports through it so in such a scenario, do I need MSDTC? If yes, how much should be the size of the MSDTC Drive? Is following process correct?
http://www.sqlnotebook.info/configure-msdtc-on-windows-cluster-2012/
2. During First Node configuration, one needs to provide the "SQL CLUSTER RESEOURCE GROUP NAME". Does it have any bearing on how it will be accessed by other servers for databases and logs? or is it just how the cluster resource group
would be named? would it be required for every instance that is created inside the cluster? Just to be clear, so one can name it according to the instance name.
3. During the instance creation, one needs to provide "SQL Server Network Name". As stated above, I plan to run SCVMM, SCOM, Orchestrator and Windows Azure Pack Databases and Reports through it, so would I be required to provide this
for all instances that I create or this is only required once in the cluster:
4. During the instance creation, one needs to provide the features required for installation i.e. instance features and shared features. As stated above, I plan to run SCVMM, SCOM, Orchestrator and Windows Azure Pack Databases and Reports through
it, so which features should be selected? so that there is less workload on the server.
5. All the instances use TempDB for databases that are present inside it. What would be the best practice with respect to TempDB. One TempDB for all instance on the servers on a separate LUN or all instance having their own TempDB LUN?  What
should be the ideal size of the TempDB LUN?
6. Should all the disks required for DBs and Logs be added to Cluster?  Should they be added normal disks or CSV Volumes?
Thanks in advance.

Hello,
1.You can run the Microsoft Distributed Transaction Coordinator service (MSDTC) as a clustered resource on a failover cluster server for increased reliability, based on the failover capabilities of the clustered servers. You can
refer to the MSDTC section of the following blog about determine whether the Microsoft Distributed Transaction Coordinator (MSDTC) cluster resource must be created.
Reference:http://msdn.microsoft.com/en-us/library/ms189910.aspx#MSDTC
2. The Cluster Resource Group is where SQL Server failover cluster resource will be placed. Each clustered SQL Server will belong to a Failover
Cluster Resource Group. For example, if you had configure a two node SQL Server Cluster, each clustered instance on the two node belong to a same Cluster Resource Group.
You can change the Cluster Resource Group name, but notes the following name is reserved and already used as Resource Group names: Available Storage, Cluster Group.
3. Each SQL Server cluster is assigned a virtual Network name and IP address, which client applications use to connect to the clustered SQL Server.
4. Not familiar with SCVMM, SCOM, Orchestrator, but you should install the Database Engine Services and SQL Server Management tools.If you want to use SQL Server Reporting Services, you can install Reporting Servers, but Report Server service cannot participate
in a failover cluster.
5. You can use isolated disk for user database and temp DB of each SQL Server Cluster
6. Yes. You should use Cluster Disks which add to Clustered Shared Volumes to host the data file and log of databases.
http://www.pythian.com/blog/how-to-install-a-clustered-sql-server-2012-instance-step-by-step-part-1/
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Install Guide - SQL Server 2014, Failover Cluster, Windows 2012 R2 Server Core

I am looking for anyone who has a guide with notes about an installation of a two node, multi subnet failover cluster for SQL Server 2014 on Server Core edition

Hi KamarasJaranger,
According to your description, you want configure a SQL Server 2014 Multi-Subnet failover Cluster on Windows Server 2012 R2. Below are the whole steps for the configuration. For the detailed steps about the configuration, please download
and refer to the
PDF file.
1.Add Required Windows Features (.NET Framework 3.5 Features, Failover Clustering and Multipath I/O).
2.Discover target portals.
3.Connect targets and configuring Multipathing.
4.Initialize and format the Disks.
5.Verify the Storage Replication Process.
6.Run the Failover Cluster Validation Wizard.
7.Create the Windows Server 2012 R2 Multi-Subnet Cluster.
8.Tune Cluster Heartbeat Settings.
9.Install SQL Server 2014 on a Multi-Subnet Failover Cluster.
10.Add a Node on a SQL Server 2014 Multi-Subnet Cluster.
11.Tune the SQL Server 2014 Failover Clustered Instance DNS Settings.
12.Test application connectivity.
Regards,
Michelle Li

Selecting VHDx as storage for File Server Role (Failover Cluster 2012 R2)

Is it possible to select an already existing (offline) VHD or VHDX as storage when creating the "File Server" role? Reason I want to do that is because I already have a file server setup as a virtual machine and causing issues so my company
decided to make the change towards a File Server role.
Thank you
David

Hi David,
Do you mean you configured it to file server failover cluster via "High Availability Wizard" ?
I think you need to choose a shared volume between two nodes to achieve high availability .
Please refer to following link :
http://technet.microsoft.com/en-us/library/cc731844(v=WS.10).aspx
If you do not select a shared volume , I think there is no difference than sharing a mounted VHDX file on a standalone file server .
I would suggest to copy these files to CSV and share them .
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

DSC, SQL Server 2012 Enterprise sp2 x64, SQL Server Failover Cluster Install not succeeding

Summary: DSC fails to fully install the SQL Server 2012 Failover Cluster, but the identical code snippet below run in powershell ise with administrator credentials works perfectly as does running the SQL server install interface.
In order to develop DSC configurations, I have set up a Windows Server 2012 R2 failover cluster in VMware Workstation v10 consisting of 3 nodes. All have the same Windows Server 2012 version and have been fully patched via Microsoft Updates.
The cluster properly fails over on command and the cluster validates. Powershell 4.0 is being used as installed in windows.
PDC
Node1
Node2
The DSC script builds up the parameters to setup.exe for SQL Server. Here is the cmd that gets built...
$cmd2 = "C:\SOFTWARE\SQL\Setup.exe /Q /ACTION=InstallFailoverCluster /INSTANCENAME=MSSQLSERVER /INSTANCEID=MSSQLSERVER /IACCEPTSQLSERVERLICENSETERMS /UpdateEnabled=false /IndicateProgress=false /FEATURES=SQLEngine,FullText,SSMS,ADV_SSMS,BIDS,IS,BC,CONN,BOL /SECURITYMODE=SQL /SAPWD=password#1 /SQLSVCACCOUNT=SAASLAB1\sql_services /SQLSVCPASSWORD=password#1 /SQLSYSADMINACCOUNTS=`"SAASLAB1\sql_admin`" `"SAASLAB1\sql_services`" `"SAASLAB1\cubara01`" /AGTSVCACCOUNT=SAASLAB1\sql_services /AGTSVCPASSWORD=password#1 /ISSVCACCOUNT=SAASLAB1\sql_services /ISSVCPASSWORD=password#1 /ISSVCSTARTUPTYPE=Automatic /FAILOVERCLUSTERDISKS=MountRoot /FAILOVERCLUSTERGROUP='SQL Server (MSSQLSERVER)' /FAILOVERCLUSTERNETWORKNAME=SQLClusterLab1 /FAILOVERCLUSTERIPADDRESSES=`"IPv4;192.168.100.15;LAN;255.255.255.0`" /INSTALLSQLDATADIR=M:\SAN\SQLData\MSSQLSERVER /SQLUSERDBDIR=M:\SAN\SQLData\MSSQLSERVER /SQLUSERDBLOGDIR=M:\SAN\SQLLogs\MSSQLSERVER /SQLTEMPDBDIR=M:\SAN\SQLTempDB\MSSQLSERVER /SQLTEMPDBLOGDIR=M:\SAN\SQLTempDB\MSSQLSERVER /SQLBACKUPDIR=M:\SAN\Backups\MSSQLSERVER > C:\Logs\sqlInstall-log.txt "
Invoke-Expression $cmd2
When I run this specific command in Powershell ISE running as administrator, logged in as domain account that is in the Node1's administrators group and has domain administrative authority, it works perfectly fine and sets up the initial node properly.
When I use the EXACT SAME code above pasted into my custom DSC resource, as a test with a known successful install, run with the same user as above, it does NOT completely install the cluster properly. It still installs 17 applications
related to SQL Server and seems to properly configure everything except the cluster. The Failover Cluster Manager shows that the SQL Server Role will not come on line and the SQL Server Agent Role is not created.
The code is run on Node1 so the setup folder is local to Node1.
The ConfigurationFile.ini files for the two types of installs are identical.
Summary.txt does have issues..
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred during the setup process of the feature.
Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name:                SQL Server Database Engine Services Instance Features
Component error code:          0x86D8003A
Error description:             The cluster resource 'SQL Server' could not be brought online. Error: There was a failure to call cluster code from a provider. Exception message: Generic
failure . Status code: 5023. Description: The group or resource is not in the correct state to perform the requested operation. .
It feels like this is a security issue with DSC or an issue with the setup in SQL Server, but please note I have granted administrators group and domain administrators authority. The nodes were built with the same login. Windows firewall
is completely disabled.
Please let me know if any more detail is required.

Hi Lydia,
Thanks for your interest and help.
I tried "Option 3 (recommended)" and that did not help.
The issue I encounter with the fail-over cluster only occurs when trying to install with DSC!
Using the SQL Server Install wizard, Command Prompt and even in Powershell by invoking the setup.exe all work perfectly.
So, to reiterate, this issue only occurs while running in the context of DSC.
I am using the same domain login with Domain Admin Security and locally the account has Administrators group credentials. The SQL Server Service account also has Administrators Group Credentials.

Transactional replication from a failover cluster instance to a SQL Server Express DB

Hello,
I have been poking around on Google trying to understand if there are any gotchas in configuring transactional replication on a instance DB of a failover cluster, to a SQL Server Express DB. Also, this client would like to replicate a set of tables between
two instances DB's which both reside on nodes of the cluster.
Everything I've read suggests there is no problem using transactional replication on clustered instance as long as you use a shared snapshot folder. I still have some concerns:
1) Should the distributor need to live on a separate instance?
2) What happens in the event of an automatic, or manual failover of a publisher, especially if the distributor does not need to live on a separate instance? I know that when a failover occurs, all jobs in progress are stopped and this seems like a recipe for
inconsistency between the publisher and subscriber.
There is a paramount concern, that this particular client won't have staff on hand to troubleshoot replication if there are problems, hence my hesitancy to implement a solution that relies on it.
Thanks in advance.

1) Should the distributor need to live on a separate instance?
Answer: It is recommended to configure the distributor on the different server, but it also be configured on Publisher/subscriber server. (Subscriber in our case is not possible as its a Express edition)
2) What happens in the event of an automatic, or manual failover of a publisher, especially if the distributor does not need to live on a separate instance? I know that when a failover occurs, all jobs in progress are stopped and this seems like a recipe for
inconsistency between the publisher and subscriber. There is a paramount concern, that this particular client won't have staff on hand to troubleshoot replication if there are problems, hence my hesitancy to implement a solution that relies on it.
Answer: If you configure both publisher and distributor on the same server and the SQL instance is failed over, the data synchronization/replication is suspended till the instance comes online.
Once the instance is up,all the replication jobs will start again and it will continue to synchronize the data to subscriber. No manual intervention is required.

Server 2008 Hyper-V Failover Cluster Error on Domain Controller Reboot

I am pretty new to Hyper-V virtual but I have 2 Hyper-V Clusters, each with 2 Nodes and a SAN, 1 Physical Domain Controller for failover cluster management and 1 virtual domain controller as backup. All is running well, no issues. I installed
windows updates on the physical DC and upon reboot, got an error 5120 on cluster 2 that says "Cluster Shared Volume 'Volume1' ('Cluster Disk 1') is no longer available on this node because of 'STATUS_CONNECTION_DISCONNECTED(c000020c)'. All I/O will
temporarily be queued until a path to the volume is reestablished. It pointed to the 2nd node in that cluster as being the issue but when I look at it, it is online and all healthy so I don't understand why the error was triggered and if the DC would
go down for a failure, would that node not be able to access the CSV permanently.
Appreciate any help anyone can provide.

Hi mtnbikediver,
In theory, if you has the correct configuration of cluster the DC restart will not cause the CSV down, does your shared storage installed on your DC? Did you run
the cluster validation before you install the cluster? We strongly recommend you run the cluster validation before you build the cluster, same time please install the recommend update of 2008 cluster first.
Recommended hotfixes for Windows Server 2008-based server clusters
http://support.microsoft.com/kb/957311
I found a similar scenario issue the DC restart will effect the cluster network name resource offline, but it is for 2008R2.
Cluster network name resource cannot be brought online when one of the domain controllers is partly down in Windows Server 2008 R2
http://support2.microsoft.com/?id=2860142
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SQL Server Agent fails to connect to DB after enabling mirror on failover cluster

Hello:
We have multiple databases running in a Failover Cluster instance: SQL 2012SP1 on Server 2008 R2 failover cluster (NOT AlwaysOn). We are trying to add a high-performance mirror in a standalone instance for DR. My understanding is that should be a perfectly
normal, supported configuration.
The mirroring is working properly; however, the clustered SQL Server agent is unable to run jobs that run in the mirrored databases.
We get the following in the job log: Unable to connect to SQL Server 'VIRTUALSERVERNAME\INSTANCE'. The step failed.
There is a partner message in the agent log: [165] ODBC Error: 0, Connecting to a mirrored SQL Server instance using the MultiSubnetFailover connection option is not supported. [SQLSTATE IMH01]
The cluster is not a mulitsubnet cluster. All hosts are connected to the same subnets and there is no storage replication. I can not find any place where I can adjust the connect string options for SQL Agent.
Any guidance or suggestions on how to resolve this would be appreciated.
~joe

SQL Team - MSFT:
Thank you for taking the time to research and provide a clear answer.
This seems very much a workaround and very unsatisfactory.
You are correct, there is an IP dependency with OR condition. Moving to an AND condition is not viable for us. The whole point is to provide network redundancy. With an AND condition, if EITHER network interface fails, the service will go offline or fail
to come online without manual intervention. This is arguably worse for uptime than having a single interface available.
We are in process of rewriting all our SQL jobs to start in tempdb before transitioning to the appropriate target database. If this works for all of our jobs, I will mark the above response as answer.
Again, thank you for the answer.
Regards,
Joe M.

Windows server 2012 failover cluster error: Cluster resource 'Virtual Machine Configuration ... of type 'Virtual machine configuration in clustered role ... failed.

I have two windows 2012 host server that are clustered using windows failover cluster feature. Each server is hosting four VMs. When migrating from Host2 to Host1, the migration failed with the following error:
Cluster resource 'Virtual Machine Configuration SCPCSQLSRV01' of type 'Virtual Machine Configuration' in clustered role 'SCPCSQLSRV01' failed. The error code was '0x569' ('Logon failure: the user has not been granted the requested logon type at this computer.').
When this happens, the VM that I was migrating can no longer be started even on the original host. The only remedy is to restart the host server.
Any suggestion on resolving this problem?
Thanks
Ikad

Thanks. The article referred to above gives the solution to my issue. There is a group policy that is applied to the OU where the host servers were placed. Doing gpupdate /force temporarily removes the problem. Unfortunately the NT Virtual Machine\Virtual
Machines account is a special account that cannot be added like other accounts and granted the log on as a service right. The thread
http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/d56f2eae-726e-409a-8813-670a406593e8 contains how it can be added which is by creating a group and running the command
Net localgroup VMTest “NT Virtual Machine\Virtual Machines” /add
to add it to a local group VMTest. VMTest is then assigned the right to log on as a service.
Ikad

Install SQL Server 2012 SP1 on a Windows Server 2012 R2 Failover Cluster - hangs at "Running discovery on remote machine" on VMWare VSphere 5.5 Update 1

Hi,I'm trying to install SQL Server 2012 SP1 on the first node of a Windows Server 2012 R2 failover cluster.The install hangs whilst displaying the "Please wait while Microsoft SQL Server 2012 Servce
Pack 1 Setup processes the current operation." message.The detail.txt log file shows as follows:(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached PID (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider
: NormalizePid is normalizing input pid (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached
PID (01) 2014-07-17 15:36:35 Slp: Completed Action: FinalCalculateSettings, returned True (01) 2014-07-17 15:36:35 Slp: Completed Action: ExecuteBootstrapAfterExtensionsLoaded, returned True (01) 2014-07-17 15:36:35 Slp: ---------------------------------------------------------------------- (01) 2014-07-17 15:36:35 Slp: Running Action: RunRemoteDiscoveryAction (01) 2014-07-17 15:36:36 Slp: Running discovery on local machine (01) 2014-07-17 15:36:36 Slp: Discovery on local machine is complete (01) 2014-07-17
15:36:36 Slp: Running discovery on remote machine: XXX-XXX-01After about 4 hours and 10 minutes, the step seems to time out and move on, however it doesn't seem to have discovered what it needs to and the setup subsuently fails

Hi,
Sorry Information you provided did not helped can you post content of both summary file and details,txt file on shared location for analysis.
Can you download Service pack again and try once more
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

MSDTC set up in SQL Server 2008 failover cluster

Hi Guys,
I am in the process of setting up failover cluster using SQL Server 2008 (64Bit) Enterprise on Windows Server 2008 R2 (64Bit) I have completed almost all the works but I got few questions regarding MSDTC configuration whether the MSDTC disk should
be assigned from SAN or it should be local to the disk , Separate disk for each nodes in the cluter or 1 disk to be used across all the servers for MSDTC in windows fail over cluster.
With regards, Gopinath.

Hi Gopinath,
Please review the following similar blogs to get more details about configuring MDTC and pros & cons of different options.
How to Configure Multiple Instances of Distributed Transaction Coordinator (DTC) on a Windows Server Failover Cluster 2008
http://blogs.technet.com/b/askcore/archive/2009/02/18/how-to-configure-multiple-instances-of-distributed-transaction-coordinator-dtc-on-a-windows-server-failover-cluster-2008.aspx
How to configure DTC for SQL Server in a Windows 2008 cluster
http://blogs.msdn.com/b/cindygross/archive/2009/02/22/how-to-configure-dtc-for-sql-server-in-a-windows-2008-cluster.aspx
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Failover cluster server

Similar Messages

Maybe you are looking for