Fails to connect and I get meassage that am working offline which I have not chosen to do. When I go into file menue I find that Work offline is ticked and unticking this sometimes solves the problem but not always.

Ofen imposssible tgo connect. Get the message am working offline but never choose this. This happens no matter where I use my portrable.
== This happened ==
Not sure how often
== Frequently when I try to connect

Michael'sgot this one covered. He has detailed the process at the link below.
https://discussions.apple.com/thread/3653100?tstart=0

Similar Messages

My Apple TV states in general menu "Activation: failed". What does that mean and how can I solve the problem?

My Apple TV states in general menu "Activation: failed". What does that mean and how can I solve the problem?

Hello MichaMuc,
I found some steps to help resolve the "Activation: failed" error messsage you are getting on your Apple TV:
Restart your base station or router. Sometimes this is done by turning the router off for a few seconds, and then on again, but check the documentation provided by the manufacturer.
To restart your Apple TV, press and hold Menu and Menu down/scroll ( - ) for about 6 seconds and then choose Restart from the menu.
If the issue continues after restarting, reset your router or base station and Apple TV to factory settings
Reset your base station or router. Use the documentation provided by the manufacturer to reset to factory settings.
To reset your Apple TV perform a factory restore.
You can find the full article here:
Apple TV: Troubleshooting wireless connections
http://support.apple.com/kb/ht1595
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

The message cannot be seen on incoming emails. I can only view the message if I click on reply. Also any links attached to email will not open. I have tried everything to solve the problem but not able to.

A message cannot be seen on my incoming emails. I can only view the message if I click on reply. Also any links attached to email will not open. I have tried everything to solve the problem but not able to.

Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

In iMovie: I open a project that has been finalized. source fragment is missing. I see a yellow triangle with exclamation mark. Why is that and how do I solve the problem?

in iMovie:
I open a project that has been finalized. source fragment is missing. I see a yellow triangle with exclamation mark. Why is that and how do I solve the problem?
please help.
J. Aalbers

Shouldn't really be the MPE at fault here ... what is the codec of the footage/sequence/project?
Second, can you create a new project in PrPro, then in the media browser, import that sequence from the other project?

Why does not the scroll on tbody in new versions of Firefox and how it can solve the problem?

why does not the scroll on tbody in new versions of Firefox and how it can solve the problem?

scrolling overflow on tbody is no longer supported because that is not allowed in CSS 2.1 specification.
See [https://developer.mozilla.org/en/CSS/overflow notes for overflow]

Just upgraded to Lion, how can i use my microsoft office especially excel. I'm getting messages that it's no longer supported. This is a BIG problem. Help, please.

Just upgraded to Lion, how can I use my microsoft office especially excel. I'm getting messages that it's no longer supported. This is a BIG problem. Help, please.

Apple has made a serious error not advising people when the Lion upgrade occurs that their present software may/will not be compatible and advise the user of such before and allow a opt out.
All you can do (besides upgrading all your software) is backup your data off the machine (not to TimeMachine) and disconnect all drives.
Hold c boot off the 10.6 disk and erase your makers hard drive on the far left, (that's the entire drive of everything)
Partition tab: Option: GUID, format OS X extended and click apply so you get a new GUID (replacing the Lion one or trouble occurs later)
Quit and install 10.6, then go through setup and use the same name as before, then update to 10.6.8
Then c boot off the 10.6 disk again and use Disk Utility to Repair the disk the 10.6.8 update messed up.
Then install all your programs again from fresh sources and lastly your user files in the same main user folders as before (music, pictures, documents etc.)
Done as described will get you back just like it was before as close as possible, make SURE to use the same username or else your iTunes and other files get all messed up. Password and drive name can be different though if you wish.
Note: if you've upgraded from 10.5 to 10.6, then you don't get the free iLife as it's not on the 10.6.3 white disks, only on the disks that came with your machine. So that will have to be purchased and reinstalled or use Pacifist to extract it from the 10.5 disks.
This handy site can advise you what software doesn't work with the Lion.
http://roaringapps.com/apps:table

Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.

Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

HT1459 Serial number is faded and too small to read. Itunes will not recognize my IPod Classic. How can I delete the current iPod software and reinstall it to see if this would solve the problem?

I recently upgraded my Itunes softeware, now itunes will not recognize my IPod Classic. If I delete the current IPod software and reinstall it, would this solve the problem, and if so, I'll need step by step instruction.

Yep.
Take a look here:
http://www.snsforums.com/index.php?showtopic=235
It appears that SANmp is indeed the most likely source of your problem.

Can't sign in to FaceTime.   Internet connection working for other things. How can I solve the problem?

Hardware - iMac 27 inch (Model 11,1 - late 2009), Processor 2.8 GHz Intel Core i7, Memory 16 GB 1067 MHz DDR3, OS X 10.9.3 (13D65), Storage Capacity 2 TB (Available 1.86 TB)
Background
(1) Me - I'm 72 years young, and am trying desperately to catch up with computer-literate youngsters. Downloaded Mavericks last winter, but then was in hospital, so am only just getting to grips with the further reaches of all the software.   One of these is FaceTime, which I never managed to get working before Xmas, and have started to attempt it again now.
(2) The problem - Upon startup of FaceTime (FT), the only thing that appeared in the Right Hand Sidebar (RHS), was a message stating that FT was switched off, alongside a big slide switch, and above both was a spinning wheel (spokes) and the title Preferences.   I slid the switch to ON, and the well of the switch glowed a brilliant blue.
I waited for several (perhaps 5) minutes, but nothing changed, the switch continued blue, and the Preferences' wheel kept spinning.   There were no other boxes or info in the RHS, so I then checked the FT menu, and found that Preferences was greyed out, and the FT Help pages only described a normal signing in,   I couldn't find a trouble shooting section.
So, I decided that the next step was to switch the FT programme off, and then back on again. there was some progress. Now the RHS was showing the signing in boxes.    So I filled them in, but got back the answer "Could not sign in. Please check your network connection and try again."   Checked the connection, tried a couple of web sites, all appeared OK.   Tried signing in again, same result.
Tried creating a new account.   That took some time, because my first attempt at an answer was over 32 characters long, and I had to rethink. Once the new answer was typed, a message came up (with words to the effect of) this name is already being used, so it's not a separate account (which I accepted), and the RHS changed to the signing in boxes again.
So I tried signing in again, but received the same message "Could not sign in. Please check your network connection and try again." I tried again a couple more times, but always with the same result.   So my Questions are:-
(1) What's happened?
(2) Was it caused by something I did?
(3) What needs to be done (or What do I need to do) in order to get FaceTime working?
Any help will be very gratefully received.   Yours
AvidLifeLongLearner

FaceTime, Game Center, Messages: Troubleshooting sign in issues

Photoshop elements quit working, I uninstalled it, tried to re-install using the cd, but getting errorPhotoshop elements quit working, I uninstalled it, tried to re-install using the cd, but getting error, any other way to re-install it without the disk ?

Photoshop elements quit working, I uninstalled it, tried to re-install using the cd, but getting error, any other way to re-install it without the disk ?

Yes.
Download Photoshop Elements products | 13, 12, 11, 10
However, the real issue is why the program is not working. Did you install anything recently?
When you tried to re-install from the disk, did you shut off the antivirus program temporarily?
Have you tried a system restore to a point in time when the program was working properly?

HT4623 my iPhone 4 has died, I have not done iCloud backup for ages so this might be the problem but i do not know how to do this without using dead phone! any assistance is appreciated.

How do you get your iphone connected to itunes as it is not there on the device menu

Have you tried resetting your iPhone?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

HT5312 I cannot authorize my new Macbook Pro, I can't deauthorize my old computer; I don't have the authorize/deauthorize button on my account. I created a new Apple ID hoping this would fix the problem, but didn't realize I now do not have access to my m

So, I bought a new Macbook Pro which i cannot authorize my itunes for. I don't even have the button indicated in the support section to authorize or deauthorize. I only have one device authorized to my account. I cant remember my security questions and cannot figure out how to change them; I think this might be the reason why i can't authorize my new device. The only way to access my itunes from my Mac is to have my iphone plugged in. Someone please help! I am a complete tard and would like to avoid a trip to the actual Apple store.

Call Apple Care for your country and request that they assist you in resetting the security questions.
To authorize/deauthorize a computer, go to the Store dropdown menu in the iTunes app.

I recently updated to the latest version of iTunes and now get a message saying 'Registry settings for iTune drivers are misng for Cd burning' I have uninstallled and reinstalled iTunes and tried everything to repair the problem but still have no optical

I am using OS 64 bit Windows Vista Home Premium and recently updated the latest version of iTunes. (I only have this CD burning software on my Laptop). Ever since updating, I received the message 'Registry settings for the iTune drivers are missing for CD burning'. The drivers for Lower and uppper filters in the registry are missingand I now have no optical drive. I have unistalled and reinstalled Itunes and manually entered the filters. Have tried everything including something called GEAR driver installer which was suggested on several technical sites. Everything was working fine in iTunes until I updated it.. It's strange I can still import music but not burn?? Friend s have told me they have ha dthe same problem when updating iTunes but resolved the problem by uninstalling/reinstalling or altering registry keys.
Today I went to use my Epson Printer and now have problems with it not working. I decided to uninstall/ install printer software and still can't get it to work either. I may be wrong but his all seems connected to me?
I have been trying for days to get telephone support and been told today you have to pay
Please can someone help me before I throw the lot out the window!!!!

Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help

My sound is like echo and i can't solve the problem with realtek hd audio manager

HP G72 notebook
Windows 7 64 bit
Sound is like echo and can't solve problem with Realtek HD audio manager

It's a Qosmio X300-16M (windows 7 64bit)
I downloaded the last toshiba's sound driver (for win 7 64bit), but it's as if it doesn't contain MaxxAudio anymore... (but the file maxxaudio.dll is still in realtek directory)
It worked correctly after Windows 7 update, (that's why I tried to reinstall the audio drivers which were in the DVD... but it does not have resolved the problem.)
And all my system restore's points have been lost after a wrong bios update or something else (but this isn't a problem anymore)
Now, my computer works correctly, my only problem is that the MaxxAudio tab (from Waves Audio) in the realtek audio manager disappeared... (It just makes a better sound...)
And I just want to know if it's a curent problem or not... and if someone can fix it

I am loosing several e mails from my inbox and sent trays. What is going on and how do I solve the problem

I am loosing several emails from my inbox and from my sent tray on both my imac and my mac book but not from the same accounts on a Windows PC. What is going on here? How can I cure the problem?

What version of OSX?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk.
Then in Mail, select each Mailbox & Rebuild from the Mailbox menu.
Is this a MobileMe or dot mac account?

Fails to connect and I get meassage that am working offline which I have not chosen to do. When I go into file menue I find that Work offline is ticked and unticking this sometimes solves the problem but not always.

Similar Messages

Maybe you are looking for