Failure general problems (improtant)

i was sending text messages to my girlfriend fine
but just suddenly
when im trying to send the text
it keeps saying
"failure general problems"
n it says
"message failed would you like to retry?"
and i thought it would go away in few hours
but no it won't...
i tried finding answers on google and here
but i couldn't
please help me
it's important

First pull the battery while the unit is on...wait a minute and reinstall and power up.
Now call *228 and choose option 1.
See if that corrects the issue.

Similar Messages

Panic/Block after update download! Unique case or general problem?

Yesterday, June 12 in the morning (Europe), i have downloaded a automatic Apple update, after that my MacBook Pro 13'' is going in Panic, noway to deblock it... a am a unique case or there is a general problem?

You are not unique sorry to say.
Thunderbolt Software Update 1.2 Causes Boot Failures
Thunderbolt Update plaguing MacBook Pros with kernel panics

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

I've noticed this especially when I youtube or video stream for a while. Switching between tabs takes 3-4 seconds. Definitely a memory leak! Is it a general problem or addon specific?

I've noticed this especially when I youtube or video stream for a while. Switching between tabs takes 3-4 seconds.
Definitely a memory leak! Is it a general problem or addon specific?
Also, when I try to close firefox and restart it, the process doesn'y get killed with the normal Command + Q in Mac.
I need to use Force Quit instead.

Try updating Flash. You appear to be running an older version dating from September 2010 which might be the cause of the problem. Download from http://get.adobe.com/flashplayer/
If the problem persists after updating, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

What is the general problem with this OriginLab VI?

I'd like to use some VIs provided by OriginLab for their graphing and analysis software. They apparently haven't updated their VIs since Labview version 8.5 The attached screenshot is an example of the general problem I'm seeing in their VIs. If I hover over the property nodes, the Labview context help gives the error "This property is not valid for this class." It looks to me like these are Origin classes and Origin properties, so I'm surprised by that error.
Any idea about the reason for this problem? I'd like to explain it to them in a little more detail and try to motivate them to fix it. Still, I doubt it will happen soon. Any suggestions about whether it's something I could fix myself?
Thanks!

The activeX interface might be inside a *.ocx, *.dll and even a *.exe file. So manually browsing and trying files with these endings might work. You could even try a text search with a hex editor to identify possible ActiveX components, you should find the keywords IDispatch and IUnknown in them.
The proper way would be when they show up in the list. This actually is derived from some registry keys (I think it was a bit cryptic to track in the registry, as it involved searching for CLSID or the like). Proper registration is done by command line regsrv32 (if memory serves right). Normally this is automatically called from the installer.
So it might be the best you just try to reinstall Origin.
Also search the Origin folder if there are some other examples included there (and if they work).
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Firewire 800 general problem?

Hello, I have a BIG problem in my hands and I'm wondering if there's anyone out there to help me.
I have 3 LaCie d2 Quadra Hard Drive eSATA 1.5Gbits, FireWire 800, FireWire 400, Hi-Speed USB 2.0 that I use to backup my music. I copy my music in the first one and use Carbon Copy Cloner to clone the information when I turn on the second and third disks. I only turn on the disks when I'm using them, the rest of the time they're all off.
Today I came into the office to backup a new CD but got an error message when I turned on the first HD: "The disk you inserted was not readable by this computer" and 3 options: Initialize (which takes me to Disk Utility to see the brand of my disk listed but no details about it), Ignore and Eject.
This happens with all 3 disks whether they're chained or not. Sometimes I get this error message, other times I get no message at all and just can't see the disks. I tried to plug them into 2 different twin 27" iMacs and 1 MBP 13" with different cables and power supplies. These are their characteristics:
For both iMacs:
Mac OS X 10.6.8
3.2 GHz Intel Core i3
8GB 1333 MHz DDR3
For the MBP:
Mac OS X 10.7.3
2.53 GHz Intel Core 2 Duo
4GB 1067 MHz DDR3
But the same problem occurs: I either get the error message or just don't see the disks at all.
Then I moved the disks to another iMac with the following characteristics:
Mac OS X 10.7.3
3.1GHz Intel Core i5
4 GB 1333 MHz DDR3
And they worked. All 3 disks with the same cables and power supplies I'd been using. So I thought "Maybe it's a Snow Leopard thing" and tried to make the disks work with the MBP (which has Lion) and they worked again! I moved the disks to their original location and once again plugged them to the MBP to finally work with them and the problem showed up again. Same error message for one of the disks, the other 2 simply don't show up.
I also tried making them work in the following Mac Pro:
Mac OS X 10.5.8
Dual 2.7 GHz PowerPC G5
4 GB DDR SDRAM
And I still couldn't.
This is all through FW800 which only worked that time I tried it with the third iMac. The only other time I got the HDs to work was plugging them to the Mac Pro but through FW400. I also tried plugging a Little Big Disk through FW800 and USB to the MBP and it didn't work. Then I plugged it into the Mac Pro using USB and there it is, with CCC slowly making the backup.
My workmate is telling me now that last week she plugged in a different pair of LaCie d2 Quadra to the MacPro and she couldn't make them work through FW800 and had to settle for FW400.
So my question is: Is there some kind of general problem with FW800 that I don't know about? Or is it a thing with LaCie? Like you see, my problem is not definite, I can't say "It works under these circumstances and it doesn't work under these" because it's a bit intermitent and annoying enough to not let me use the HDs at all. I sadly don't have another brand of HD to see if this occurs. I've run tests all morning in all the computers and I can't figure out the source of the problem. There are no software updates available for any of the computers.
Is there anyone out there with the same problem? If it's a general problem, are there any posts about it? I can't find one.
Sorry for the long read! I'm going to take a look at the LaCie support page to see if there's anything there.
Thanks to anyone who read all this

Well, external WD drives (or rather the cheap enclosures they use) aren't necessarily or generally a good way to rule out problems, but may be in this case.
In any case, have you tried two things: a) a different (brand new) FW cable and b) an SMC or PRAM reset:
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/HT3964
Either/both sometimes help with FW or USB ports problems.

Cause code 98 general problems.

I am trying to send a message to one person and now i get cause code 98 general problems. what does this mean.
i even tried to call them and it rings once and then i get disconnected. did i get blocked or what happened?

That is definitely very strange. Rikki82. Let's see what we can do to help clear this out. Let's get some basic details first. What is the make and model of your phone? Any recent application updates prior to this starting? Since it is only occurring with one phone number, have you tried asking that person if they have accidentally blocked you?
NicandroN_VZW
Follow us on twitter @VZWSupport

Was the general problem with the bluetooth headset solved in the new ios 5 or in the new iphone 4s

was the general problem with the bluetooth headset solved in the new ios 5 or in the new iphone 4s ?
thank you greatly
also i would like to know what are the diffrences with the bluetooth 4.0 vs 2.1
( the bluetooth headset i was thinking of is jawbone icon series thinker black )

Hi,
I had HUGE issues with a BlueAnt Q2 on the 4, and after five exchanges, I had to get rid of the phone becuase the Apple store admited that they had "some bluetooth issues."
I still have the Q2, and I was wondering the same thing becuase I realy want an iphone.

: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Hi   .
    I was creating the pass the values t in temp tables though s sis package vs2012 .
  First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
   exec USP_GETMP02333
   go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one   executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
                [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help me

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

Create an instance of failure, perplexing problem? ? ?

I use the environment: oracle10g2.0.1 server version. Operating system is 32-bit xp2.
My database block size display is 8k, operating system block size display is 4k.
Computer is not networked. server can be installed successfully. But when I create an instance the error always appear below:
ORA-01503:CREATE CONTROLFILE ??
ORA-00221:?????????
ORA-00206:?????????(? 18,# ? 1)
ORA-00202:????:"D:\ORACLE\PRODUCT\10.2.0\ORADATA\FOREVER\CONTROL01.CTL"
ORA-27041:??????
anyone who can help me?
Thanks and Regards,
Jolan.

When all else fails, Read The Fine Manual
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/toc.htm
bcm@bcm-laptop:~/bcm_old$ oerr ora 27041
27041, 00000, "unable to open file"
// *Cause: open system call returned an error, additional information
//          indicates which function encountered the error
// *Action: check errno
bcm@bcm-laptop:~/bcm_old$ oerr ora 202
00202, 00000, "control file: '%s'"
// *Cause: This message reports the name file involved in other messages.
// *Action: See associated error messages for a description of the problem.
bcm@bcm-laptop:~/bcm_old$ oerr ora 206
00206, 00000, "error in writing (block %s, # blocks %s) of control file"
// *Cause: A disk I/O failure was detected on writing the control file.
// *Action: Check if the disk is online, if it is not, bring it online and try
//        a warm start again. If it is online, then you need to
//            recover the disk.
bcm@bcm-laptop:~/bcm_old$ oerr ora 221
00221, 00000, "error on write to control file"
// *Cause: An error occurred when writing to one or more of the control files.
// *Action: See accompanying messages.
bcm@bcm-laptop:~/bcm_old$ oerr ora 1503
01503, 00000, "CREATE CONTROLFILE failed"
// *Cause: An error occurred during CREATE CONTROLFILE
// *Action: See accompanying errors.Does the OS system log file show any disk related problems?

General Problems with iMac 9,1 's

There seems to be a disturbing trend as of the last two OS releases, Mavericks and Yosemite, and it involves a lot of iMac 9.1's. You see a lot of reports of sudden shutdowns, kernel panics, graphics issues, Safari crashes, Messages woes...and the list goes on. I have an early 2009 iMac 9,1 with 8GB RAM and an nVidia 130gt 512 Mb. With the release of Mavericks 10.9.4, I started getting the Sudden Shutdown Syndrome (machine powers down with no warning, like the power cord was pulled). After doing the required switching of power cables, using different RAM, switching of UPS's, opening the computer to clean it, etc..., I thought it might be a problem with either the power supply unit, the graphics card, or the logic board. Unfortunately, I'm overseas in a country that doesn't have an Apple Store so an easy repair option isn't available to me.
Pressing forward, I noticed that I didn't get any crashes or shutdowns in Safe Mode. Granted, only subset of the extensions are loaded, but if it was a flaky PSU or logic board, it would seem that it would show something at some point. And, the thing about graphics cards is that when they go bad, they start to leave artifacts and pixilate, and that wasn't happening in full boot or safe mode. I also noticed that in full boot mode, I could repeat certain actions that would cause a shutdown 100% of the time. I have also read reports where people had the logic board, graphics, and/or PSU changed out, the problem went away for a bit, then came back!
I'm now thinking that this is a software conflict that specifically affects iMac 9,1's and Macs of similar architectures. I'm fairly convinced of this because when I entered the Yosemite Public Beta Program (I was desperate to get a fix), I noticed that with each release, certain actions that would cause 100% failure/shutdown were gone, while others remained. When I installed Public Beta 5, and did a cache cleanup...MY SHUTDOWN PROBLEM WAS GONE! All the actions that used to crash the machine didn't work anymore. If it was a hardware problem, it would seem like the shutdown problem would still be present.
But, alas, mine is still a tale of woe. When I installed Public Beta 6, THE SHUTDOWNS RETURNED! When I looked at the release notes, it mentioned unspecified driver changes. Hmmmmmmm. Unfortunately, Public Beta 6 was the GM so when I downloaded the Yosemite Final Release, nothing changed...same old crashes.
So, what do I think is happening? I'd bet my bottom dollar that the problem lies in the interaction between the GeForceTesla driver, the kexts which control the power management of the graphics cards, and the system/user cache files. I think if Apple investigated those areas, a solution may be found. Also, I wish they would go back to Public Beta 5 and see why that release was so stable for iMac 9,1's (at least for mine anyway).
However, if anyone else has any insight to these problems, I'd love to hear it.
As a side note, Safari (along with my system) crashes frequently while Google Chrome Canary 64-bit is as solid as a rock. And, again, I experience no crashes in Safe Mode, even with using Safari.

I have an iMac9.1 24" and had no issues in Mavericks and have no issues at all in Yosemite. So it seems to rule out hardware-problems.

General problem: WLAN to VLAN forwarding

Hello together,
I try to find a general solution to the following problem:
Cisco WLAN environment, >50 intelligent APs, >300 WLAN User, multiple SSIDs. Behind every SSID is a different VLAN. DHCP enabled on the clients. The users standard of knowledge does not provide the means to configure their WLAN Client. Users are in an active directory.
The objective:
The user must be able to connect to their VLAN without knowing the key of the corresponding SSID.
The momentary solution is an correspondingly hard konfigured WLAN Adapter with RJ45 connector which provides access to the requested SSID / VLAN.
To clarify: WLAN Adapter A -> Access to SSID A / VLAN A
WLAN Adapter B -> Access to SSID B / VLAN B
etc.
Now there are users with i.e. iPads without an RJ45 port, who should also be able to connect to their VLANs.
How can I do this?
I thought I could get a running 802.1X network based on a WLC 4402 and controlled APs, but if I enable 802.1X the old hard konfigured WLAN Adapters stop functioning because they do not support that standard. The withdrawal from service of the WLAN Adapters is not an option.
If anyone has suggestions, I would greatly appreciate.
Thanks in advance.

At first: thanks for the responses:
@b.garczynski
What you described was my first intention, but if I understand it right Radius is only possible with 802.1X. But that´s unfortunately not supported by the WLAN adapters.
@stefan.angerer
My "corpus delicti" is the Siemens Gigaset WLAN Repeater 108
http://gigaset.com/at/de/product/GIGASETWLANREPEATER108.html?tab=data
This Adapter does not support 802.1X and just crashes if it is assigned to an WLAN where the .1x standard is running. If it´s disabled, it`s doing its job.
@all
Furthermore the VLAN Association must be safe and flexible, so an Authentification via MAC or similar is also not an option.
Customers can be quite demanding...
Thanks in advance.

Toshiba A660-1 General Problems

Hello there,
My name is Diego and I have had some troubles with my computer lately. I recently did a backup of all my information and reinstalled Windows 7 on my Satellite A660-1 since it was running slow. However I have had some problems since then, I will list them here in case anyone can help me with them.
1) First of all, my top splashboard is not working, I mean the touch sensitive buttons on top of the keyboard where you find the Wifi button, the increase/decrease volume, etc.
2) Until one day ago, my Wifi was working well, I installed the drivers and it was running smothly, however, now my Wifi connection is not working. The computer tells me to "activate the inalambric connection functionality". Since the sensitive buttons do not work I cannot connect the wifi using them. I press "Fn" + F8 and it does not work as well. The strange thing is it was working until yesterday and I did not change anything, there were only Windows Updates that happened when I was turning it off. (Ethernet connection works very well)
3) My touchpad moves the cursor but it does not "click".
4) When I press Alt + Tab it does not change screens, however, when I use "Windows" + Tab it does.
5) When I open the volum control icon on the bottom right the line that marks where the volume is starts moving up and down like crazy. This is just a detail since volume works well, it just called my attention.
Well, this is it (for now ) I am really interested in at least solving point (2) which is the wifi problem, the others are important but not so much. If anyone has any recommendation I would really appreciate it.
Thank you in advance.
Sincerely,
Diego
Solved!
Go to Solution.

Hello there, I fixed it myself, thanks anyways.
In case anyone has similar problems, I read in another thread something that worked for me.
1) Disconnect Batery and AC Adapter
2) Maintain Power Button 30 seconds without releasing
3) Connect everything
4) Turn on computer
5) When Toshiba screen comes on, quickly press F2
6) Then press F9 - Yes and then F10 - Yes
Hopefully it will work for you too.

General Problems Installing Flash Player

I'm trying to get movies to work on Youtube (which worked
yetserday; was the new version added recently?). It told me to
download the newest Flash Player, so I tried to, but it doesn't
work. I can get up to the step after the activeX control popup and
the "Install / Dont Install" popup. After that, the movie that
would usually show the installation process doesn't load. I know
what usually happens, because I've installed it on other computers
in the past. I get the little shapes icon in the upper-left corner
which, after 2 or 3 minutes, turns into an X. EDIT: I forgot to
mention that sometimes it goes as far as saying that Internet
Explorer will restart, but it never does anything.
What's going wrong?
If you need to know, I have a Windows Vista laptop with
parental controls. Thanks in advance.

Shane, since you must be having problems getting a thread started, I'll just go ahead and try to help you here.
Use IE and go to Help and click on About Internet Explorer. It should tell you sp1 or sp2.
Also using IE, go to Tools, click on Manage add ons and look in all add ons for Shockwave Flash Object. Let me know if it is Enabled and if it is version 10.0.45.2 or says Flash10e.ocx.
Then switch over to FF (Firefox) and find the plug-in SWF version 10.0.45.2 and make sure it is listed and Enabled.
Post this info back to me.
Thanks,
eidnolb

Nokia 5800XM general problems, corruption?

I've been very pleased with my Nokia 5800 though today I ran into a very weird problem.
In the main screen you have the keypad and the contact list buttons, suddenly neither wouldn't work at all. You can push them but nothing just happened. I didin't change anything in the phone before the problem and it just suddenly started doing that.
Rebooting and removing battery for a while did nothing, resetting default settings fixed it for a minute or two. I did a hard reset to the phone and then uploaded my backups to the phone again now it's working though It's very unstable, if I try to browse websites they wont load (indicator stays at 0kb all the time) I'm currently reflashing the firmware again to get a clean everything to defaults.
I hope Nokia will still continue to support this product and upgrade the firmware because there seems to still be much quirks and freezes in the gui.
And does anyone else have problems syncing the music library with any other program than nokia music? If I try to sync with winamp (tags are ok, bought tracks from webstore) some of the songs sync okay and they show in the right album but some of the songs from the same album are "unknown" and the ID3 tags are okay it just does that at random! Seems like there is a bug in the way 5800 handles tags? Should be fixed asap if that is the case, due being music phone mainly. Manually copying and updating library seems to work too.
Same tracks sync nicely with nokia music (though the gui is really slow and it cant convert FLAC) windows mediaplayer seems to do fine too.
These wont work either
-Mediamonkey
I hope this is the right place for submitting this information, I'd really like to give more information if needed, or submit a ticket to nokia support / coders / debuggers if possible?
Thanks
Jori Mikkonen

I had this problem a few weeks ago, don't worry it's easy to fix.
Just take a look at my post on...
/discussions/board/message?board.id=smartphones&message.id=141736#M141736

Failure general problems (improtant)

Similar Messages

Maybe you are looking for