Failure in DAC process

We are running both Finance, HR, and Siebel in production and experience a situation a couple times a week where DAC failes but there is no failures in Informatica or failed tasks in DAC. Does anyone else ever run across this issue? We currently just restart the DAC process.

Hi
This may Occur if DAC is running out of JAVA memory.I am Guessing this can be solved by increasing the Java memory.
or
if the property in DAC setup ---------CreateQueryIndexesAtTheEnd is True change it to FALSE
Let me know if it helps

Similar Messages

  • Oracle SSO Failure - Unable to process request

    Dear gurus,
    i got problem when accessed ADF application which has registered with SSO, it says that
    "Oracle SSO Failure - Unable to process request
    Either the requested URL was not specified in terms of a fully-qualified host name or OHS single sign-on is incorrectly configured.
    Please notify your administrator."
    My environment is OAS Cluster front ended by LBR. so everytime i deploy the ADF application then i access it with LBR hostname which is http://oassvr.pelni.co.id, the host of each node it self are oassvr1 for node 1 and oassvr2 for node 2. the hostname that i added on partner applications was LBR hostname (oassvr.pelni.co.id:7777).
    i had done ssoreg OAS 1013 with SSO succeed then i tried to run/access ADF application with url http://oassvr.pelni.co.id:7777/HRd/faces/DepartmentLOV.jspx then i got above error. Please help! these are the error log from http log midtier :
    [Fri Aug 20 10:27:34 2010] [warn] [client 10.1.0.249] [ecid: 1282271254:10.1.0.41:172050:0:3058,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 10:29:08 2010] [warn] [client 10.1.0.249] [ecid: 1282271348:10.1.0.41:282956:0:6409,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 10:38:31 2010] [warn] [client 10.1.0.249] [ecid: 1282271911:10.1.0.41:233572:0:5430,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 11:30:50 2010] [warn] [client 10.1.0.249] [ecid: 1282275050:10.1.0.41:196882:0:3734,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 11:41:17 2010] [warn] [client 10.1.0.249] [ecid: 1282275677:10.1.0.41:286722:0:2897,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 15:43:09 2010] [warn] [client 10.1.0.249] [ecid: 1282290189:10.1.0.41:213462:0:10939,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 17:12:58 2010] [warn] [client 10.1.0.249] [ecid: 1282295578:10.1.0.41:151672:0:5100,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 17:33:40 2010] [warn] [client 10.1.0.249] [ecid: 1282296820:10.1.0.41:294968:0:9510,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    Regards,
    Andes

    anyone has similar problem ?
    Please help.
    Thanks,
    Andes

  • SRT: Unexpected failure in SOAP processing occurred - HTTP server instance

    I am trying to invoke an ABAP server proxy.  I can see the call route through XI.  But then when it tries to invoke the ABAP server proxy, i get the following error - SRT: Unexpected failure in SOAP processing occurred: ("No configuration for this HTTP server instance").  It looks like this might be a configuration issue on the SAP ECC side but I am not sure what needs to be corrected.  Here is the error is XI.
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
      <SAP:P1>500</SAP:P1>
      <SAP:P2>SRT: Unexpected failure in SOAP processing occurred: ("No configuration for this HTTP server instance")</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>HTTP response contains status code 500 with the description SRT: Unexpected failure in SOAP processing occurred: (&quot;No configuration for this HTTP server instance&quot;) Error when sending by HTTP (error code: 500, error text: SRT: Unexpected failure in SOAP processing occurred: (&quot;No configuration for this HTTP server instance&quot;))</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Your help is appreciated.  I saw another posting about the same error but it was not answered:
    Re: SOAP:1.026 SRT: "no configuration for this HTTP server instance"
    Thanks,
    Jay

    hi Jay,
    i face the same problem for the web service and after reading your thread i've check that the ECC XI web service is already active in SICF
    is it possible the user id used for testing dont have authorization for testing or accessing the web service ?
    if it is possible, do you know what kind authorization that i need to add to the user id ?
    please advice and many thanks in advance

  • Error with web service SRT: Unexpected failure in SOAP processing occurred:

    Hello,
      I get the following error with a web service
    "SRT: Unexpected failure in SOAP processing occurred: ("No configuration for this HTTP server instance")"
    Any ideas on how to solve this ?
    Thanks.
    Regards, Michel

    Hi,
    I think the WSDL file shared with you and the soap message you are getting are a mismatch.
    Try to check the soap message xml format and see if matches the ouputs tags structure in WSDL file.
    Thanks & Rgds,
    Aditya

  • "Oracle SSO Failure - Unable to process request" - help please

    We are doing a test switchover from our primary site to a DR site and in the DR site, we are not able to access BI Publisher, which we need to do in order to update the data source connection strings so they point to the databases at the DR site instead of the primary site.
    When I try to login to BI Publisher (at http://hostname:7777/xmlpserver), I just get the error “Oracle SSO Failure – Unable to process request”. We are running OBIEE 10.1.3.4 with Application Server 10.1.3. I've opened an SR already, but it's been a week with no solution yet. Please let me know if you have any ideas what the problem could be, or if there is any other information I can provide to help with troubleshooting.
    Thanks!

    I just wanted to provide an update on this issue now that it's resolved. I'm not even sure if I understand it exactly, but it turns out that if I access BI Publisher by using the virtual hostname that points to our load balancer instead of using the actual hostname of the app server, then I'm able to get logged into BI Publisher successfully and I don't get the SSO error. I think it has to do with how it was registered with SSO. Thanks a lot Srini and SSVS for your help.

  • What is the DAC Process in windows called

    Hi All,
    I have installed DAC Server(10.1.3.4) on windows 2008. When i go to start > programs > DAC > start server i see a dos window that shows statements but it does not say the dac server has started anywhere.
    When i look in the task manager i dont see any thing that specifies dac server. when i login to the console some times i see the server status icon as Orange.
    I am confused :-( how should i confirm that the dac server is running on the server, what processes to look for etc
    in older versions the process window would stay on but not it this release i guess or is it the server 2008 ?
    Thanks for you help!
    biadmin

    Hi,
    Normally the icon on the top right corner of the DAC UI turns Orange when DAC server is running and is in idle state. If ETL is running it turns to Green and if server is down it turns to Red
    1. If you are on windows when you start DAC server you cannot see the dos cmd window unless you modify startserver.bat file in DAC folder, comment out the line (%JAVAW%) and un comment line (%JAVA% ).
    2. One option on windows is you can create DAC server as a Windows Service and monitor the status.
    3. On UNIX If DAC Server is running , you can verify if the default port 3141 is listening
    Hope this helps

  • ADM(Anomaly Dectector Module) PowerDown Failure in upgrade process.

    hellow, everyone.
    i'm yunchouljung in korea
    i have a question about ADM module power down issue.
    i had upgraded AGM Module successfully in version 6.1.2 to 6.1.6
    but failed ADM Module upgrade in version 6.1.2 to 6.1.6
    i uploaded a AP images in MP status and enterd "hw-module module 12 reset cf:4" command.
    (i waited a message "you can now reset the module....")
    after a reset process, ADM module disabled by SCP dnld Failure.
    so, i enabled a power on ADM Module but result is same.
    my upgrade process is below.
    1.     hw-module module 12 reset cf:1
    2.     copy ftp://[email protected]/c6svc-adm1G-k9.6-1-6.bin pclc#12-fs:
    3.     hw-module module 12 reset cf:4
    anybody help me?
    thanks in advance.
    p.s : i have already tested other ios version and ap/mp images.
    ================================================================
    the module version and log is below.
    Router_OUT#sh module
    Mod Ports Card Type                              Model              Serial No.
      2    3  Anomaly Guard Module                   WS-SVC-AGM-1-K9   
      3   16  16 port 1000mb GBIC ethernet           WS-X6416-GBIC     
      5   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX    
      7    2  Supervisor Engine 720 (Active)         WS-SUP720-3B      
      9    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE     
    10    8  Network Analysis Module                WS-SVC-NAM-2      
    12    3  Anomaly Detector Module                WS-SVC-ADM-1-K9   
    Mod MAC addresses                       Hw    Fw           Sw           Status
      2  0017.e067.ec6c to 0017.e067.ec73   2.0   7.2(1)       6.1(6)       Ok
      3  000e.d73c.3d40 to 000e.d73c.3d4f   2.5   5.4(2)       8.5(0.46)RFW Ok
      5  0015.2bfe.c130 to 0015.2bfe.c15f  10.1   7.2(1)       8.5(0.46)RFW Ok
      7  0016.c85e.3aa0 to 0016.c85e.3aa3   5.2   8.4(2)       12.2(18)SXF1 Ok
      9  001b.d45d.f890 to 001b.d45d.f893   2.6   12.2(14r)S5  12.2(18)SXF1 Ok
    10  0003.fead.7592 to 0003.fead.7599   2.0   7.2(1)       4.0(1)       Ok
    12  0012.80f1.1ae8 to 0012.80f1.1aef   1.0   7.2(1)       8.5(0.46)RFW PwrDown
    Mod  Sub-Module                  Model              Serial       Hw     Status
      7  Policy Feature Card 3       WS-F6K-PFC3B       SAL10478K1R  2.3    Ok
      7  MSFC3 Daughterboard         WS-SUP720          SAL104892TJ  2.5    Ok
      9  Centralized Forwarding Card WS-F6700-CFC       SAL1124QX44  3.1    Ok
    Mod  Online Diag Status
      2  Pass
      3  Pass
      5  Pass
      7  Pass
      9  Pass
    10  Pass
    12  Not Applicable
    Router_OUT#
    47w1d: SP: The PC in slot 2 is shutting down. Please wait ...
    47w1d: SP: shutdown_pc_process:No response from module 2
    Jul 13 16:54:49: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (Reset)
    47w1d: SP: OS_BOOT_STATUS(2) MP OS Boot Status: finished booting
    Jul 13 16:56:50: %DIAG-SP-6-RUN_MINIMUM: Module 2: Running Minimal Diagnostics...
    Jul 13 16:56:57: %MLS_RATE-4-DISABLING: The Layer2 Rate Limiters have been disabled.
    Jul 13 16:56:57: %DIAG-SP-6-DIAG_OK: Module 2: Passed Online Diagnostics
    Jul 13 16:56:57: %OIR-SP-6-INSCARD: Card inserted in slot 2, interfaces are now online
    Jul 13 16:56:58: %SVCLC-5-FWTRUNK: Firewalled VLANs configured on trunks
    Jul 13 17:32:23: %SVCLC-SP-5-STRRECVD: mod 2: <Application upgrade has started>
    Jul 13 17:32:23: %SVCLC-SP-5-STRRECVD: mod 2: <Do not reset the module till upgrade completes!!>
    Jul 13 17:42:11: %SVCLC-SP-5-STRRECVD: mod 2: <Application upgrade has succeeded>
    Jul 13 17:42:11: %SVCLC-SP-5-STRRECVD: mod 2: <You can now reset the module>
    47w1d: SP: The PC in slot 2 is shutting down. Please wait ...
    47w1d: SP: PC shutdown completed for module 2
    Jul 13 17:42:57: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (Reset)
    47w1d: SP: OS_BOOT_STATUS(2) Anomaly Guard OS Boot Status: finished booting
    Jul 13 17:45:03: %DIAG-SP-6-RUN_MINIMUM: Module 2: Running Minimal Diagnostics...
    Jul 13 17:45:06: %MLS_RATE-4-DISABLING: The Layer2 Rate Limiters have been disabled.
    Jul 13 17:45:06: %DIAG-SP-6-DIAG_OK: Module 2: Passed Online Diagnostics
    Jul 13 17:45:06: %OIR-SP-6-INSCARD: Card inserted in slot 2, interfaces are now online
    Jul 13 17:45:07: %SVCLC-5-FWTRUNK: Firewalled VLANs configured on trunks
    47w1d: SP: The PC in slot 12 is shutting down. Please wait ...
    47w1d: SP: shutdown_pc_process:No response from module 12
    Jul 13 17:53:29: %C6KPWR-SP-4-DISABLED: power to module in slot 12 set off (Reset)
    47w1d: SP: OS_BOOT_STATUS(12) MP OS Boot Status: finished booting
    Jul 13 17:55:30: %DIAG-SP-6-RUN_MINIMUM: Module 12: Running Minimal Diagnostics...
    Jul 13 17:55:37: %MLS_RATE-4-DISABLING: The Layer2 Rate Limiters have been disabled.
    Jul 13 17:55:36: %DIAG-SP-6-DIAG_OK: Module 12: Passed Online Diagnostics
    Jul 13 17:55:37: %OIR-SP-6-INSCARD: Card inserted in slot 12, interfaces are now online
    Jul 13 18:26:27: %SVCLC-SP-5-STRRECVD: mod 12: <Application upgrade has started>
    Jul 13 18:26:27: %SVCLC-SP-5-STRRECVD: mod 12: <Do not reset the module till upgrade completes!!>
    Jul 13 18:37:05: %SVCLC-SP-5-STRRECVD: mod 12: <Application upgrade has succeeded>
    Jul 13 18:37:05: %SVCLC-SP-5-STRRECVD: mod 12: <You can now reset the module>
    47w1d: SP: The PC in slot 12 is shutting down. Please wait ...
    47w1d: SP: PC shutdown completed for module 12
    Jul 13 18:38:35: %C6KPWR-SP-4-DISABLED: power to module in slot 12 set off (Reset)
    Jul 13 18:46:04: %C6KPWR-SP-4-DISABLED: power to module in slot 12 set off (Module  Failed SCP dnld)
    Jul 13 18:53:54: %OIR-SP-6-REMCARD: Card removed from slot 12, interfaces disabled
    Jul 13 19:01:28: %C6KPWR-SP-4-DISABLED: power to module in slot 12 set off (Module  Failed SCP dnld)

    > *** ERROR => ThInit: db_connect (step 1, th_errno
    >  13, action 3, level 1) [thxxhead.c   10156]
    Is your database running (mounted and open)?
    Markus

  • DAC processes the return status from Informatica incorrectly

    Hi,
    My Env Info is as below:
    DAC: Build AN 10.1.3.4.1.patch.20110427.0538, Build date: April 27 2011
    Informatica:*9.0.1 HotFix 2 (On OS windows 2003*)
    Now, I am running the Siebel CRM-Loyalt execution Plan in DAC, but enccounter the below issue:
    1)Some task start before its immediate predecessors finished
    for example, <SIL_LoyMemberDimension> depends on <SDE_SBL_LoyMemberDimension> , the <SIL_LoyMemberDimension> starts before <SDE_SBL_LoyMemberDimension> successfully finished.
    when checking the log, found that:
    the time <SIL_LoyMemberDimension> started is just the start time workflow <SDE_SBL_LoyMemberDimension> start its first session in Informatica, and also, in the execution's detail info view, DAC marked the start time workflow <SDE_SBL_LoyMemberDimension> start its first session as the task's finished time.
    This issue leads to many failures in building target table.
    2)The task status in execution for informatica task is usually incorrect
    when some session failed in a workflow, the workflow is failed too, but the DAC's execution will marked the task as successfully completed, which is incorrect and will lead to some future un-predictable issue
    Anyone can help?
    Thanks
    Leon

    I would suggest go for a new patch p13551596_101341_Generic this is latest (i guess)
    If this doesn't help let me know will look into this issue.
    If it is helpful, please mark as correct or helpful

  • IDVD encoding causes system failure during burn process

    I have iDVD 5 on my work computer (dual 2.7Ghz G5 / 2.5 G RAM), and have burned successfully before my current project.
    My current project has a 28:45 movie and I have tried two different themes with different combinations of drop zones (one with the movie as the drop zone and one with stills only) and everything previews okay, but when I start the burn process it will get to a certain point in the encoding and then the whole system crashes. I come back to check on the process, and my screen is filled with black squares with error info in it... (looks like a DOS screen or something) and it says something about system failure and that I need to restart my computer.
    I'm so stubborn that I keep trying different combinations of possibilities but I'm having no luck. The movie that it's hangin up on was captured in Final Cut Pro from a VHS, edited in Final Cut to trim the excess black, and exported as a Final Cut Movie that I imported into iDVD.
    As I said above, I have burned successfully on this computer and this iDVD, so the fact that this one project refuses to burn is perplexing.
    any thoughts?

    A gap in video would be a space between one clip and another. This is a problem when you are editing your footage, not capturing it. In other words, it is a user introduced problem.
    In FCP when you say "Ignore Timecode Breaks" it just means to continue capturing video even if there is a timecode break. If you do not select this option, FCP would immediately stop catpturing whenever it hit a timecode break. A timecode break is not the same thing as a gap you create during editing. A timecode break could be as simple as rewinding your camera footage and then recording over it... the timecode now has a break because it is not continuous timecode, it jumps from one timecode to another.
    Depending on what device you are capturing from, your audio may come in a few frames before or after the video. This would be especially true for a non-controllable device. It is a simple fix to adjust this as you would have noticed any sync issues right in the timeline during playback.
    A system reboot in the middle of encoding is a serious crash... I doubt if it is the footage per se that is causing this to happen. Footage has been known to force an application to abort a process (or stay in an infinite loop), but an actual system shutdown would be extremely rare.
    Consider recapturing the footage into a new FCP project and then creating a new iDVD project for it, this will eliminate either a corrupted FCP file or an iDVD project from the equation. Also, are you burning directly to disc or are you preparing a disc image? I'd go with the disc image approach because you can test your final build that way.

  • SSAS communication link failure issue while processing cube.

    Hi All,
    While processing the cube using full process option I am getting the issue communication link failure. If I process each dimension and measure group manually, I am able to succeed. If any one has faced this issue, please let me know.
    Thanks,
    Moorthy

    Please see:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/e32efab7-f06d-405e-98ea-c6565c98e9bc/cube-is-getting-offline-multiple-times-in-a-day?forum=sqlanalysisservices

  • Capturing failure event of Process Type ABAP program in Process Chain

    Hi all
    I am calling an ABAP program in a Process Chain, there are subsequent steps after the ABAP program. The subsequent steps should execute if the ABAP program fails. While running the process cahin, if the ABAP program fails, then a pop-up comes up asking for triggering subsequent process. Since this Process Chain has to run in background mode, we dont want this pop-up. How can this be stopped?
    Please help.

    Hi Arnab,
    Welcome to SDN!!
    When you define the next step after the ABAP program select the action for as "error".
    Hope I have made things clear.
    Bye
    Dinesh

  • Failure of Extract Process

    Hello All,
    I am trying to extract and the process fails. please help me this, following is part of "view ggsevt"
    2012-07-26 16:24:05 WARNING OGG-00752 Oracle GoldenGate Capture for Oracle, ext1.prm: Failed to validate table SAPSR3.FAGL
    _SPLINFO. Likely due to existence of unused column. Please make sure you use sourcedefs in downstream Replicat, or the target
    table has exactly the same unused columns when using ASSUMETARGETDEFS or DDL replication.
    2012-07-26 16:39:15 WARNING OGG-00752 Oracle GoldenGate Capture for Oracle, ext1.prm: Failed to validate table SAPSR3.FMIF
    IIT. Likely due to existence of unused column. Please make sure you use sourcedefs in downstream Replicat, or the target tabl
    e has exactly the same unused columns when using ASSUMETARGETDEFS or DDL replication.
    2012-07-26 16:39:18 WARNING OGG-00752 Oracle GoldenGate Capture for Oracle, ext1.prm: Failed to validate table SAPSR3.FMIO
    I. Likely due to existence of unused column. Please make sure you use sourcedefs in downstream Replicat, or the target table
    has exactly the same unused columns when using ASSUMETARGETDEFS or DDL replication.
    2012-07-26 17:45:46 WARNING OGG-00752 Oracle GoldenGate Capture for Oracle, ext1.prm: Failed to validate table SAPSR3.MSEG
    . Likely due to existence of unused column. Please make sure you use sourcedefs in downstream Replicat, or the target table h
    as exactly the same unused columns when using ASSUMETARGETDEFS or DDL replication.
    2012-07-26 18:22:05 ERROR OGG-01960 Oracle GoldenGate Capture for Oracle, ext1.prm: Failed to validate table SAPSR3.ORA_
    COCKPIT_HELPER. The table is created with the NOLOGGING option, which is not supported. Extract may not be able to capture da
    ta from it.
    2012-07-26 18:22:05 ERROR OGG-00663 Oracle GoldenGate Capture for Oracle, ext1.prm: OCI Error retrieving bind info for q
    uery (status = 100), SQL < select (select count(*) from dba_tables where logging = 'NO' and owner = 'SAPSR3' and t
    able_name = 'ORA_COCKPIT_HELPER') + (select count(*) from dba_tab_partitions where table_owner = 'SAPSR3' and
    table_name = 'ORA_COCKPIT_HELPER' and logging = 'NO') + (select count(*) from dba_tab_subpartitions wher
    e table_owner = 'SAPSR3' and table_name = 'ORA_COCKPIT_HELPER' and logging = 'NO') from DUAL >.
    2012-07-26 18:22:05 ERROR OGG-01668 Oracle GoldenGate Capture for Oracle, ext1.prm: PROCESS ABENDING.
    I am confused for
    1)WARNING OGG-00752 Oracle GoldenGate Capture for Oracle, ext1.prm: Failed to validate table.. -- as i have DBOPTIONS ALLOWUNUSEDCOLUMN in my extract process.
    2)Bind info for query.
    please help.
    Kind Regards,
    Krishna.

    Hi,
    I started the extract for few tables as suggested and got the output of "ggsevt" as :
    on Source
    Check swap space. Recommended swap/extract: 128G (64bit system).
    2012-07-31 16:33:01 INFO OGG-00993 Oracle GoldenGate Capture for Oracle, ext1.prm: EXTRACT EXT1 started.
    2012-07-31 16:33:01 INFO OGG-01478 Oracle GoldenGate Capture for Oracle, ext1.prm: Output file ./dirdat/INITLOADEMP.DAT
    is using format RELEASE 11.2.
    2012-07-31 16:33:06 INFO OGG-01226 Oracle GoldenGate Capture for Oracle, ext1.prm: Socket buffer size set to 27985 (flu
    sh size 27985).
    2012-07-31 16:56:25 INFO OGG-00991 Oracle GoldenGate Capture for Oracle, ext1.prm: EXTRACT EXT1 stopped normally.
    2012-07-31 17:14:50 INFO OGG-00987 Oracle GoldenGate Command Interpreter for Oracle: GGSCI command (root): send manager
    childstatus.
    2012-07-31 17:14:50 INFO OGG-00963 Oracle GoldenGate Manager for Oracle, mgr.prm: Command received from GGSCI on host m
    ahaeccsbox (CHILDSTATUS).
    on Target:
    2012-07-31 21:50:45 INFO OGG-00963 Oracle GoldenGate Manager for Oracle, mgr.prm: Command received from SERVER on host
    localhost.localdomain (REPORT 27981 7820).
    2012-07-31 21:50:45 INFO OGG-00974 Oracle GoldenGate Manager for Oracle, mgr.prm: Manager started collector process (Po
    rt 7820).
    2012-07-31 21:50:45 INFO OGG-01228 Oracle GoldenGate Collector for Oracle: Timeout in 300 seconds.
    2012-07-31 21:50:50 INFO OGG-01229 Oracle GoldenGate Collector for Oracle: Connected to static-mum-59.185.103.124.mtnl.
    net.in:61873.
    2012-07-31 21:50:50 INFO OGG-01669 Oracle GoldenGate Collector for Oracle: Opening ./dirdat/INITLOADEMP.DAT (byte 0, cu
    rrent EOF 0).
    2012-07-31 22:14:10 INFO OGG-01670 Oracle GoldenGate Collector for Oracle: Closing ./dirdat/INITLOADEMP.DAT.
    2012-07-31 22:14:10 INFO OGG-01676 Oracle GoldenGate Collector for Oracle: Terminating after client disconnect.
    2012-07-31 22:15:48 INFO OGG-01670 Oracle GoldenGate Collector for Oracle: Closing ./dirdat/INITLOADEMP.DAT.
    2012-07-31 22:15:48 INFO OGG-01676 Oracle GoldenGate Collector for Oracle: Terminating after client disconnect.
    Does it mean that my initial load was successful ? or does it indicate something else ? please guide.

  • Failure of starting process in Photoshop Elements 3 on MacOS 10.5.6

    Hello,
    Up to today Ph.El.3 has been running an this computer. I experimented with gimp. And after that Ph.El 3 program ends "unexpectedly". I have deleted gimp and ph.El.3 and reinstalled ph.el.3 but nothing has changed. Can somebody help me? Thanks for help, Jürgen
    Here is a citation of the problem-report:
    Process: Photoshop Elements 3 [420]
    Path: /Applications/Adobe Photoshop Elements 3/Photoshop Elements 3.app/Contents/MacOSClassic/Photoshop Elements 3
    Identifier: com.adobe.Photoshop.Elements
    Version: 3.0x208 (3.0)
    Code Type: PPC (Translated)
    Parent Process: launchd [78]
    Date/Time: 2009-01-03 13:48:05.763 +0100
    OS Version: Mac OS X 10.5.6 (9G55)
    Report Version: 6
    Exception Type: EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000008
    Crashed Thread: 0
    Thread 0 Crashed:
    0 translate 0xb80bcd58 0xb8000000 + 773464
    1 translate 0xb80b7007 0xb8000000 + 749575
    2 translate 0xb80d49c0 0xb8000000 + 870848
    3 translate 0xb813ce79 spin_lock_wrapper + 1981
    Thread 1:
    0 ??? 0x800bc1c6 0 + 2148254150
    1 ??? 0x800c39bc 0 + 2148284860
    2 translate 0xb818b6ea CallPPCFunctionAtAddressInt + 202886
    3 ??? 0x800ed095 0 + 2148454549
    4 ??? 0x800ecf52 0 + 2148454226
    Thread 2:
    0 translate 0xb81529ef spin_lock_wrapper + 90931
    1 translate 0xb8183633 CallPPCFunctionAtAddressInt + 169935
    2 translate 0xb81861e2 CallPPCFunctionAtAddressInt + 181118
    3 translate 0xb80dfb0b 0xb8000000 + 916235
    Thread 3:
    0 translate 0xb8152863 spin_lock_wrapper + 90535
    1 translate 0xb816e79d CallPPCFunctionAtAddressInt + 84281
    2 translate 0xb80dfb0b 0xb8000000 + 916235
    Thread 4:
    0 translate 0xb8152863 spin_lock_wrapper + 90535
    1 translate 0xb816e79d CallPPCFunctionAtAddressInt + 84281
    2 translate 0xb80dfb0b 0xb8000000 + 916235
    Thread 5:
    0 translate 0xb8152b34 spin_lock_wrapper + 91256
    1 translate 0xb8167dce CallPPCFunctionAtAddressInt + 57194
    2 translate 0xb80bdb8b 0xb8000000 + 777099
    3 translate 0xb80b7007 0xb8000000 + 749575
    4 translate 0xb80d49c0 0xb8000000 + 870848
    5 translate 0xb813d75f spin_lock_wrapper + 4259
    Thread 6:
    0 translate 0xb8152c24 spin_lock_wrapper + 91496
    1 translate 0xb816c825 CallPPCFunctionAtAddressInt + 76225
    2 translate 0xb80bdb8b 0xb8000000 + 777099
    3 translate 0xb80b7007 0xb8000000 + 749575
    4 translate 0xb80d49c0 0xb8000000 + 870848
    5 translate 0xb813d75f spin_lock_wrapper + 4259
    Thread 0 crashed with X86 Thread State (32-bit):
    eax: 0x00000008 ebx: 0xb80bcd30 ecx: 0x00000000 edx: 0x00000006
    edi: 0x00000008 esi: 0x80303820 ebp: 0xb7fffa08 esp: 0xb7fff9d0
    ss: 0x0000001f efl: 0x00010206 eip: 0xb80bcd58 cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
    cr2: 0x00000008
    Binary Images:
    0xb8000000 - 0xb81d7fe7 translate ??? (???) /usr/libexec/oah/translate
    Translated Code Information:
    Rosetta Version: 21.03
    Args: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp /Applications/Adobe Photoshop Elements 3/Photoshop Elements 3.app/Contents/MacOSClassic/Photoshop Elements 3
    Exception: EXC_BAD_ACCESS (0x0001)
    Thread 0: (0xb009a83c, 0xb81529ef)
    0x00000000: /System/Library/Frameworks/Carbon.fr

    Sorry. I do not know the right words in English. But I will try to explain.
    Within the PSE frame or window on the left side you can look on the directory, in the middle you look on files / pictures and just above the file is shown (can be scrolled by clicking)which contains the files and pictures in th bottom).- That's what I mean with "built-in browser", better perhaps "directory". If I use it / click on files PSE crashes.
    The other way to open files and pictures is this: In the horizontal strip at the edge of the frame I click on the menue, then "open" (if I translate from German to English). I get the *apple-finder" (it looks like at least). I search for the picture, click on it and it opens in PSE and PSE does not crash.
    Uff. ;-) PSE makes me practising my English.
    Jürgen

  • Ldap sync failure with post process event handler

    Hi All
    we are using OIM 11.1.1.5 and OID 11.1.1.5 and i have ldap sync. Now the issue, is i have two postprocess eventhandlers for diff functionality which will work in trusted recon and update few custom fields. Now when i do the trusted recon my eventhandlers are working fyn but ldap sync is not working, users are not getting created in OID.
    When I look in to the issue i came to know that ldap sync was not working because one of my eventhandler which will update custom date fields( lyk dob, role start date).
    and the same ldap sync is working with another event hanlder(at this point i unregistered eventhandler which updates the custom date fields)
    anyone help me out regarding this issue???
    Regards
    $sid

    WOuld you mind updating, How the issue was resolved?

  • DAC task failure: SIL_PositionDimensionHierarchy_AsIsUpdate_Full

    Hi,
    The Incremental DAC load failed yesterday night for two workflows:
    SIL_PositionDimensionHierarchy_AsIsUpdate
    SIL_PositionDimensionHierarchy_AsIsUpdate_Full
    The workflows belong to the Out-Of-Box Container SIL_Vert.
    The workflows populate zero records on other regular days, but this is for the first time it resulted in an error during DAC load.
    The DAC log doesn't show any detectable error message with the root cause information. But since there were many dependent tasks running on top of it, they all got stopped and henceforth resulting in the DAC failure.
    ###########################DAC LOG######################################
    =====================================
    STD OUTPUT
    =====================================
    Informatica(r) PMCMD, version [8.6.1 HotFix10], build [412.0123], Windows 32-bit
    Copyright (c) Informatica Corporation 1994 - 2010
    All Rights Reserved.
    Invoked at Fri Jan 28 02:15:04 2011
    Connected to Integration Service: [Integration_Service_SAMPGHSBL112].
    Integration Service status: [Running]
    Integration Service startup time: [Sat Dec 04 18:52:14 2010]
    Integration Service current time: [Fri Jan 28 02:15:04 2011]
    Folder: [SIL_Vert]
    Workflow: [SIL_PositionDimensionHierarchy_Type1Update] version [1].
    Workflow run status: [Terminated unexpectedly]
    Workflow run error code: [0]
    Workflow run id [46743].
    Start time: [Fri Jan 28 02:14:43 2011]
    End time: [Fri Jan 28 02:14:48 2011]
    Workflow log file: [G:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SIL_PositionDimensionHierarchy_Type1Update.log]
    Workflow run type: [User request]
    Run workflow as user: [Administrator]
    Run workflow with Impersonated OSProfile in domain: []
    Integration Service: [Integration_Service_SAMPGHSBL112]
    Disconnecting from Integration Service
    Completed at Fri Jan 28 02:15:04 2011
    =====================================
    ERROR OUTPUT
    =====================================
    Error Message : Unable to get Informatica workflow return code. Check Informatica workflow/session logs.
    ErrorCode : -1
    Re-Queue to attempt to run again or attach to running workflow
    if Execution Plan is still running or re-submit Execution Plan to execute the workflow.
    EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
    com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:179)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:585)
    com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
    java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
    java.util.concurrent.FutureTask.run(FutureTask.java:138)
    java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
    java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
    java.util.concurrent.FutureTask.run(FutureTask.java:138)
    java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
    java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
    java.lang.Thread.run(Thread.java:619)
    12972 SEVERE Fri Jan 28 02:15:05 EST 2011
    ANOMALY INFO::: Error while executing task Informatica Session Batch
    MESSAGE:::Submitted task failed during execution
    EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.submitIncompleteTasks(ParallelTaskBatch.java:251)
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:360)
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:326)
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
    com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
    com.siebel.etl.engine.core.Session.run(Session.java:3246)
    java.lang.Thread.run(Thread.java:619)
    12973 SEVERE Fri Jan 28 02:15:05 EST 2011
    ANOMALY INFO::: Error while executing : com.siebel.analytics.etl.etltask.ParallelTaskBatch:Informatica Session Batch
    MESSAGE:::com.siebel.analytics.etl.etltask.FailedTaskException: Submitted task failed during execution
    EXCEPTION CLASS::: java.lang.RuntimeException
    com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:469)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:326)
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
    com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
    com.siebel.etl.engine.core.Session.run(Session.java:3246)
    java.lang.Thread.run(Thread.java:619)
    ::: CAUSE :::
    MESSAGE:::Submitted task failed during execution
    EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.submitIncompleteTasks(ParallelTaskBatch.java:251)
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:360)
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:326)
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
    com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
    com.siebel.etl.engine.core.Session.run(Session.java:3246)
    java.lang.Thread.run(Thread.java:619)
    12974 SEVERE Fri Jan 28 02:15:05 EST 2011
    ANOMALY INFO::: Error while executing task All Task Batches
    MESSAGE:::Execution of child batch Informatica Session Batch failed.
    EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
    #######################END OF DAC LOG#################################
    After the first fail of the DAC load due, I marked the task as completed and restarted the Execution Plan again; the load failed again due to the second workflow mentioned above. I repeated the same steps and this time, it ran till the end to complete the load process.
    The Informatica Log file for the particular workflow shows:
    Message: Use override value [DATAWAREHOUSE.DATAWAREHOUSE.SIL_Vert.SIL_PositionDimensionHierarchy_AsIsUpdate.log] for session parameter:[$PMSessionLogFile].
    Please suggest us if we can bypass the above mentioned tasks and we can exclude the same from our current Execution Profiles. If the dependencies on these tasks create issues, how do we modulate the same for successful DAC loads going forward. Also please specify the significance of these particular workflows.
    Thanks-
    Ramaswamy Pappula
    Ph: 412-320-6796

    Hi gs,
    This is database dependent command
    depending on conncetion type @DAC_SOURCE_DBTYPE
    which DAC reads when you define Source database type in Physical datasources,
    By default it will invoke the informatica workflkow SIL_PositionDimensionHierarchy_AsIsUpdate_ORCL
    however if your
    source is DB2 it will invoke workflow: SIL_PositionDimensionHierarchy_AsIsUpdate_DB2
    source is mSSQL it will invoke workflow: SIL_PositionDimensionHierarchy_AsIsUpdate_MSSQL
    source is Teradata it will invoke workflow: SIL_PositionDimensionHierarchy_AsIsUpdate_TD
    Let me know if this helps.
    Thanks,
    Ani

Maybe you are looking for

  • Application error after installing NW 7.01 Trial version

    Hello all together, i have used the search to find threads with the same issue but there was non thats fits really to my issue. I have installed the NW 7.01 on a virtual maschine with windows Xp sp2. as I did it before several times. the installation

  • Java with sensor networks

    Hi, I have recently been given a task to create an interface that should allow simple command input in the CSLU toolkit (http://cslu.cse.ogi.edu/toolkit/) to be interpreted to invoke applications to run on a wireless sensor network base node. I have

  • Can you change backgrounds globally?

    Is there a way to change both the page properties background color and a grid's background color globally so it changes on every page in the site? I sure hope so.

  • Creative Suite 5.5 Design Standard EXIT CODE: 15 ERROR

    Hello Everyone, I keep getting a Exit Code: 15, When I try to install Creative Suite 5.5 Design Standard. In the Summarty i get  0 fatal error(s), 0 error(s), 0 warning(s). I have already ran the Adobe Clean Tool, still now luck. Any ideas on how to

  • Java7 applet fails to load on Mountain lion & Lion

    I have developed sample cocoa (64 bit) webview application with all plug In settings enabled (setJavaEnabled:YES setPlugInsEnable:YES). But the Java applet plugin has been failed to load. I am using latest Java 7 from Oracle (update 25). I dont know