Faster loading of mp3 files

Hello,
previous versions of audition used a small file with informations about a mp3 file which was loaded in Audition. Advantage: fast re-opening of this mp3 file.
Is it possible to have the same behaviour in Audion 3?
Carlos

Actually none of the Audition versions work on MP3 files files directly; AA converts the MP3 to a WAV file when it is opened and if you choose to save back to MP3, then AA re-converts the file to MP3. This is a "lossy" compression format and the quality of the stored file will degrade further with each save.
The "small file" that you speak about is a ".pk" file and is only applicable to 16bit and 32bit WAV files. And yes, Audition 3, like all its' predecessors, support .pk files.
--Dean

Similar Messages

When I tried to load some mp3 files on to my samsung brightside I looked under card memory and my songs were there but when I clicked on my music it said no memory available remove files and I have an 8 gb micro sd card in and there is nothing else on it

When I tried to load some mp3 files on to my samsung brightside I looked under card memory and my songs were there but when I clicked on my music it said no memory available remove files and I have an 8 gb micro sd card in and there is nothing else on it

Whew.... got it to work after days of trying to figure.
Got answer here: http://forums.macrumors.com/showthread.php?t=1450821 from zblaze.
Wiped phone completely, restored as NEW iphone through itunes. Checked 'Sync all Music'.
After that happens you can restore from backup.

Using Flashvars to load external mp3 files

I am trying to find a very good step by step tutorial on using "Flashvars" to load external mp3 files, I have been searching on google and the many I have found fall short in some way or another. From what I have been able to gather, I have tried using the code in red (commented out), which works, and modify it to use "Flashvars". The code that works, the mp3 file is hard coded, but my goal is to use "Flashvars" which I am attempting to do in the code following the code in red. I am also including the html code. Any help will be greatly appreciated.
Thanks,
David
var soundReq:URLRequest = new URLRequest("mardi_gras2.mp3");
var sound:Sound = new Sound();
sound.load(soundReq);
sound.addEventListener(Event.COMPLETE, onComplete);
function onComplete(event:Event):void
    sound.play();
var soundReq:URLRequest = new URLRequest(root.loaderInfo.parameters.audio);
var sound:Sound = new Sound();
sound.load(soundReq);
sound.addEventListener(Event.COMPLETE, onComplete);
function onComplete(event:Event):void
    sound.play();
HTML CODE
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0" width="550" height="400" id="mySoundvars" align="middle">
    <param name="allowScriptAccess" value="sameDomain" />
    <param name="allowFullScreen" value="false" />
    <param name="movie" value="mySoundvars.swf" />
   <param name="FlashVars" value="audio=mardi_gras2.mp3" />
    <param name="quality" value="high" /><param name="bgcolor" value="#ffffff" />    <embed src="mySoundvars.swf" quality="high" bgcolor="#ffffff" width="550" height="400" name="mySoundvars" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave-flash" pluginspage="http://www.adobe.com/go/getflashplayer" FlashVars="audio=mardi_gras2.mp3" />

Ok waterlovinguy,
I went back to my original code, and I got things to work... I think my whole issue was with the HTML CODE. So I decided to use the "SWFObject generator". I had never used it before, frankly I had never heard of it until I started my searches on "Flashvars".
Thank you very much for all your assistance, PEACE,
David
Final Codes below
var my_var:String = new String();
my_var = root.loaderInfo.parameters.myflashvar;
myText.text = my_var;
var soundReq:URLRequest = new URLRequest(root.loaderInfo.parameters.audio);
var sound:Sound = new Sound();
var soundControl:SoundChannel = new SoundChannel;
sound.load(soundReq);
play_btn.addEventListener(MouseEvent.CLICK, playSound);
stop_btn.addEventListener(MouseEvent.CLICK, stopSound);
function playSound(event:MouseEvent):void
    SoundMixer.stopAll();
    soundControl = sound.play();
function stopSound(event:MouseEvent):void
    soundControl.stop();
HTML Code
                <!>>
                <!<![endif]>
                    http://www.adobe.com/go/getflashplayer
                    </a>
                <!>>
                </object>
                <!<![endif]>
            </object

Trouble with loading external mp3 files

I apologize for the length of the post. I hope this is clear
of what I am trying to explain.
My problem deals with getting "undefined" when I press a
button to load an external mp3 files. The following is what my XML
childNode looks like:
<option phonetic="Soundless, or A" name="aleph"
cursive="alephCursive.swf" block="alephBlock.swf"
audio="char1.mp3"/>
Every attribute loads the way I've programmed them, except
for the last one "audio".
The following is what my actionscript looks like loading in
these attributes:
Everything is happening inside the onLoad event for my XML
file.
var xmlContent = this.firstChild.firstChild;
audioContent = new Array();
for (var i = 0;
i<this.firstChild.firstChild.childNodes.length; i++) {
nextEntry = xmlContent.childNodes
audioContent = [nextEntry.attributes.phonetic,
nextEntry.attributes.name, nextEntry.attributes.cursive,
extEntry.attributes.block, nextEntry.attributes.audio];
The code above simply adds each attribute to the audioContent
array. Each element traces out correctly.
The following code is how I am using these attributes:
for (var i = 0; i<audioLength; i++) {
audioContainer.attachMovie("container4", "audioItem"+i, i);
// Create a shortcut reference to the present movie clip
thisClip = audioContainer["audioItem"+i];
thisClip.myTxt1.htmlText = audioContent[0];
thisClip.myTxt2.htmlText = audioContent
[1];
thisClip.cursive_mc =
loadThis(assetPath+audioContent[2], thisClip.cursive_mc);
thisClip.block_mc = loadThis(assetPath+audioContent
[3], thisClip.block_mc);
thisClip.speaker_mc.attachMovie("speaker", "speaker_mc",
this.getNextHighestDepth());
thisClip.speaker_mc.speaker_mc.onRollOver = function() {
this.nextFrame();
thisClip.speaker_mc.speaker_mc.onRollOut = function() {
this.prevFrame();
thisClip.speaker_mc.speaker_mc.onRelease = function() {
mySnd.loadSound(audioPath+audioContent[4],true);
Loading the text works inside the htmlText. Using a function
loadThis to load external swf files works corerctly and even
attaching a linked movieclip from my library called "speaker" works
correctly.
The problem comes from pressing the speaker movieclip that
the output traces "undefined" instead of the external mp3 file.
I appreciate any help. Thanks.

As Ned said the problem might be with the file structure on the server. Other problems may be with spelling. You computer may not be case sensitive to the names of the .swf files that you are loading, but your server might. So, on your computer when you are testing, second.swf is the same as Second.swf, or even second.SWF. But, on the server each of these variations is seen as a different file. Another problem is that when you are loading files from the same computer in testing, those files are close and so they load very quickly from your computer. When the files have to travel from the server, there will likely be a measurable period of time before the file is ready to be shown. This is particularly problematic with video that is embedded into an .swf. The whole file will need to be downloaded and uncompressed before it is available to play. If you stream the video as an external file, you can shorten the wait considerably.

ITunes no longer imports 320kbs MP3 files

I have been using iTunes for several years. I am a professional audio engineer and make my living doing it.
For years, I have been able to load 320kbs MP3 files into iTunes and load them into my iPhone to check my mixes.
All of this has come to a complete stop since this last update with iTunes.
For those of you who might have an answer for me, here is some things you might need to know:
1. Yes, these are valid 320kbs MP3 files
2. Yes, they play in Quicktime
3. Yes, they have proper Meta, ID Tags (all versions)
4. Yes, they load and play just fine in ALL other players (Windows, other iPhone, iPad, iPod players ect) EXCEPT they do NOT load in this version of iTunes.
5. Yes, I have uninstalled and re-installed iTunes - no help
6. Yes, I have deleted my play list and rebuilt it from scratch - no help
7. Yes, I have turned off iCloud - makes no difference
8. Yes, OTHER PEOPLE (including my clients) are having the SAME PROBLEM with the new iTunes
9. No, they do NOT load into iTunes - iTunes does not allow me to drag and drop them, nor does it allow me to use the 'add to playlist' function.
iTunes simply will not load my 320kbs MP3 files.
I have been doing this same routine using the same method for years and it has ALWAYS worked until this last version.
Something has seriously gone wrong with iTunes
Anybody have a work around? I really really need to be able to listen to my mixes on my portable devices (and so do my clients) and this bug is a show stopper.
Thanks.
Larry

Go to iTunes preferences
General Tab
Import Settings
Change Import using to Wav Encoder
Change Setting to Custom
Now you will,have options to set everything
How files are sent to iTunes is dependant on how you setup the bounce in Logic Pro itself
In Bounce Dialog, select MP3 and then on right of Bounce Dialog box are settings for MP3 output file...
or,,,,
of course, you select any of the other formats like PCM Wave and give it's settings...
You can actually bounce to many different output files at the same time by checking the appropriate boxes on left hand side..

Create an audiobook from MP3 files?

Hi all,
I've just bought a couple of Audiobooks from Buzzymedia. These come on a CD as multiple MP3 files.
Is there any way to turn these into one or two audiobooks rather than loads of mp3 files that I have to sync and make sure are played in the right order ?

Thanks, but that's not going to solve this for me I'm afraid.
The CD's I've got just contain MP3s, so there's no way to rip them afresh. As for just joining the tracks, the appendix only deals with doing this with WAV files, and the only software it mentions is for Windows, which I don't have access to

AUD-00706 and ORA-29400 when inserting an MP3 file

I can't seem to be able to load any MP3 files. I keep getting the following errors:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "ORDSYS.ORDAUDIO", line 1100
ORA-29400: data cartridge error
AUD-00706: unsupported or corrupted input format
ORA-06512: at "ORDSYS.ORDAUDIO", line 1058
ORA-06512: at line 11
I read somewhere that Oracle did confirm this as a problem and that it was fixed on Oracle9i Release 2, however I'm running 9.2.0.6.0. I'm using PL/SQL to load the file. WAV files work just fine.
Has anyone run into this problem? If so I would really appreciate your help.
Thanks!
-Alan

This should work.
Can you send me a MP3 that causes this exception? (Lawrence.Guros at oracle.com)
Larry

Media files prevent Flash from fully loading external XML file

Im trying to debug a flash widget we created, and it loads
fine on the 20 odd computers we tested on EXCEPT for one computer
where, the application doesn't load an external XML file that calls
for 3 small mp3 files and a FLV file to load as well.
In a debugger, we noticed that when it tried to load these
mp3 files it was getting a Forbidden access message. The FLV just
prevents the FLV player from showing up at all (not even the skin).
Can anyone figure out why, that it would work over all the
other computers and NOT the one? On that person's computer, we
tried it in IE, Firefox, even Chrome and the application doesn't
load. We even cleared the cache, did a hard refresh and still
nothing.
However, the other computers work just fine.
ALL the computers have the latest Flash software installed.
What could cause this problem?

Actually what worked was removing 'xmldoc' from the php script. So $data =$GLOBALS["HTTP_RAW_POST_DATA"]; instead of $data = xmldoc($GLOBALS["HTTP_RAW_POST_DATA"]);
Couldn't find anything about 'xmldoc'. Is it used for anything in php?
Anyway, the loading error went away, but then I got into problems with getting the return echoed values back. The textfield stayed empty even when saving the data.txt file worked.
I then placed the <stuff> tags between <root> tags and then flash got the sentences between the <stuff> tags back. Why does Flash need the returned xml output to be between <root> tags for it to see the content between the <stuff> tags? So why do I need to use echo("<root><stuff>Server unable to create file.</stuff></root>"); instead of cho("<stuff>Server unable to create file.</stuff>");?

Teradata fast load log file empty

hei all,
after update odi 11g teradata fast load script not running, error tells to see the log file but log is empty
any solution
naseer

any solution please

Can't load my ipod nano from itunes on a mac; that is, I can't drag and drop an mp3 file (of a speech) from iTunes to my iPod--though the iPod shows up on iTunes. My nano is the brand new touch screen.

I received the new iPod Nano with the touch screen for Christmas. I have a MacBook Pro running OS 10.5.8. I have iTunes 10 on my system. I cannot drag and drop MP3 files from iTunes to my iPod--though it appears that iTunes recognizes my iPod--it shows up on the Devices menu on the left side of iTunes. My wife--a long-time Mac user--kidded me that I didn't know what I was doing, Then she tried to load my iPod and failed as well. Any suggestions?

Is the Manually manage music and videos option enabled from under the iPod's Summary tab in iTunes?
B-rock

Unable to load/play some mp3 files on library

This is simply my problem:
When i drag and drop some mp3 files to load them on the library iTunes does simply nothing! No track uploaded, no error messages, nothing...The same thing when i try to play them with itunes. Double click on the file and...nothing! These files are similar to the others, 320 kbps bitrate.I tried to change their names o the advanced options but it didn't work. Please help me.

Verify that the files will play in another player, such as Windows Media Player. If so, you have encountered the classic symptoms of iTunes being strict/finicky/incompetent (pick your own interpretation) about slight variations in the MP3 headers.
Use a cleanup program to get them in shape. Many people here have had success with MP3 Validator.

Unable to load mp3 files recorded using Logic Express into iMovie 8

I'm having issues getting mp3 files created with Logic Express to load into iMovie...
Now when you export audio files from Logic it's usually an AIFF file...so when I play the file in iTunes...I choose the option to "create mp3 version"
Now when iTunes does this, it creates an MPEG version which I assume won't load into iMovie...mp3s only, so I drag it to my desktop and then it's given an mp3 tag but it still won't load in iMovie 8
Any insight on this issue would be appreciated...

iMovie can handle MP3, AAC, AIFF.

QT mp3 file won't load in any browser

There is an mp3 file on the right of this page http://shellyandoliver.com which will not load in Snow Leopard but plays fine on My other iMac using 10.5.8
Can anyone help me find out why?

It loads fine on mine, but it loads the old QT 7.6.6.
Do you have the old version of QT installed on your SL system? If not you can install it from the SL install DVD. It's an optional install.

My Zen Nano says "No Recording" after I just loaded a few MP3 files to

I used the Zen Nano Media Explorer to load the mp3s and everything looks good. I can see the folders and files in Windows Explorer. But when I disconnect it from the computer and power it on, I see the message No Recording.
Need help since it's my sister-in-laws Zen and I was trying to load her music for her.
Donald

I have some MP3s in the root, and in two folders. There also is a file named WMPInfo.xml
It use to work. There were MP3s on it when I started. I deleted those and replaced them with her selection.
If I format the dri've will it remove the firmware? or just the music files?
I haven't contacted support yet since I don't know if she has the product registered yet. I was hoping it was just something simple that I did wrong.

My iTunes library is on an old computer. Not enough memory to consolidate the associated MP3 files. Transferred library to new computer. How can I add the MP3's without having to re load every file / folder again? Thanks.

Hello, I'm trying to transfer my iTunes library from an old computer with small hard drive to a new windows 8 laptop. Much of my library consists of links to MP3/ 4 files etc but there isn't enough harddrive memory to consolidate the files into iTunes music folder. I downloaded the library onto an external hardrive and have installed it on the new computer. All files that were in iTunes music (now iTunes Media file) work fine. I have transferred over all my MP3 files but of course iTunes library wont play the file as there is no established link to the file and it asks whether iTunes should locate the file. I don't want to have to import every MP3 file/ folder all over again and then delete the unlinked entries in iTunes as this will take way too much time. Is there a way to sync all of these MP3 files to iTunes automatically or do I need to go back to start and somehow try and put the library back onto the hard drive and get the files consolidated to that from my old computer? Any help most gratefully recieved. Thanks.

The files that weren't inside the media folder on the original machine need to be copied over to exactly the same paths as they had on the source machine. See this thread for an ongoing discussion of a similar problem. See also this post on migrating the iTunes library.
tt2

Faster loading of mp3 files

Similar Messages

Maybe you are looking for