Fastest way to get overset textframes

What is the fastest way to get overset Textframes?

tell application "Adobe InDesign CS4"
     tell document 1
          return every text frame whose overflows is true
     end tell
end tell

Similar Messages

What is the fastest way of getting data?

With a scanning electron microscope, I need to scan a 512*512 pixel area with a pixel repetition of 15000 (two channels), meaning averaging over 15000 measurements. Simultaneously I have to adjust the voltage output for every pixel.
I am using a 6111E Multifunction I/O board in a 800MHz P3. The whole task has do be done as fast as possible (not more than 20 minutes altogether).
What is the fastest way to get this huge amount of data with averaging and output in between? (E.g. do I use buffered read with hardware triggering or is there a faster way?)

Using the NI-DAQ API (not LabView) will give you a significant amount of more control over what happens and when to the data stream; which translates to a more efficient program. But you need to program in C/C++ or Delphi then. The Measurement Studio provides ActiveX controls that are like the LabView ones for C&C++ (they�re slow like the LabView ones though � not a lot you can do about the Windows GDI).
What are you trying to sample 15000 times? The 512*512 pixel field?
That�s almost 15Gigs of data! And it means you need to process data at 12.8MB/s to finish it in 20 minutes. I hope you know C, x86 assembly and MMX.
I would setup a huge circular buffer (NI-DAQ calls them �double buffers�), about 30 seconds worth or so, to use with SCAN_Start. Then I would proces
s the actual buffer the card is DMA�ing the data into with a high priority thread. Progressively sum the scan values from the 16bit buffer (the samples are only 12 bit, but the buffer should still be 16bits wide) into a secondary buffer of DWORDs the size of the screen (512*512), and you�ll need two of those, one for each channel. Once the 15000 scans are complete, convert each entry into a float divide by 15000.0f, and store it in a third buffer of floats.
If you wish to contract this out, send me an email at [email protected]

Fastest way to get a macbook pro retina

Okay, so I finally got my graduation money to buy the macbook pro I want. It's the low end pro, 2.3ghz with retina display. ($2200) I checked online and they say there is a 3-4 week before the item even gets shipped. I also tried calling me local apple store twice and got 2 different responses, the first one said they got a shipment earlier today but they quickly sold out nearly an hour later, and the second specialist told me I should just order it online.
So my question is, what would be the fastest way to get the macbook pro? I start summer classes in early July and wish to have my macbook pro before then. As a matter of fact, I'm so excited about it that I want it now.

Hey Shadow...I know how you feel. Mine will be here first week of July. My local Apple store had some today. They also had some last Friday. You have to call everyday....once in the morning and then in the afternoon. If you do this, you will likely catch them with a few from day to day.
I would have canceled my shipment (Apple makes this easy on their site) and picked up one in the store today. However, the one in the store was the $2700. I ordered the $2200 with the 16gb ram b/c I do music and video editing....so I stuck with my online order.
Is this your first Mac? Depending on what you need it for, you may get more "bang" for the buck with a non-retina version.
Oh well...either way...hold that Grad money tight until you get what you want. My Pro Retina will be a 50th Birthday present......so I know how you feel !
Good luck.
Edit: Don't forget the education purchase....you get some off and a $100 apple card.

Hello! I have a MacBookPro5,1. I recently had to erase the disk and start over. So right now I have OS X. what is the best(cheapest/fastest) way to get current on my OS to be able to use current websites and programs? thanks!

Hello! I have a MacBookPro5,1. I recently had to erase the disk and start over. So right now I have OS X 10.5.5. what is the best(cheapest/fastest) way to get current on my OS to be able to use current websites and programs? thanks!
Right now there is pretty much nothing on it, and I cant download basic things.

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Fastest way to get libreoffice betas on archlinux?

hi,
I noticed that the libreoffice 3.6 series will have a feature that would enormously simplify some work i have to do. So my question is, assuming that i don't want to compile the whole libreoffice, what's the fastest way to instal libreoffice 3.6 betas on archlinux?
Is there some unstable repository that i'm not aware of? Or a way to install deb or rpm packages? Or anything I completely ignore?
thanks

I may be missing something, but aren't a lot of these suggestions ignoring the OP's main question: is there somewhere to get it WITHOUT compiling from source. All these options would require compiling. That said, the OP probably should do his own search. Here are a couple of freebies:
You could check through the unofficial repos to see if any of them have it.
Otherwise it is possible to convert a deb and/or rpm. See here for an example.

Whats the fastest way to get CS6 out of trial mode?

Premiere 6 is in trial mode, only allowing Standar Def DV settings. Application manager wont launch and says " Adobe Genuine Software Validation Failure. The product you are trying to install is not Adobe Genuine Software and appears to be counterfeit/ What is the most efficient way to get back to work?
Windows 7 64 bit

Please try the following document:
http://helpx.adobe.com/x-productkb/global/digital-certificate-revoked-aam.html

Fastest Way to Get to Internet

Okay, dumb question, but is there any faster way to get reasonable quality video to the Internet than MiniDV tape/capture?
I've got Trade Show **** coming up and I need to figure out the most efficient system from floor to publish. I've been using MiniDV off a Panasonic GS500 and assorted Sonys, captured to and edited on a MacBook Pro. I keep wondering if I go to a tapeless system does that really buy me anything?
Sadly, the little Flash cameras just don't cut it.
Be happy to buy new stuff if it works!
Thanks in advance for your thoughts...
Michael B

Welcome to the forum!
Take a look at the TriCaster (Pro, Studio or Broadcast models). You can use up to 6 cameras, 4 audio inputs, a quasi-VGA input, 2 channels of 'virtual VTR' and will record to it's own hard drive in full resolution as well as wmv format ... all while live streaming to the internet (push or pull). Also has graphics creation capabilities, live chroma keying (with several built-in live set templates) and outputs for additional recording devices, projectors ... and a host of other features.
http://www.newtek.com/tricaster/
-DH
I don't work for 'em ... just use 'em.

What's the fastest way to get a broken phone replaced?

Summary:
What a joke. Clearly broken iPhone, but when I get to the store, no one will help me. I have to make an appointment with a "Genius" and come back later. In the meantime, no phone for me.
Anyone know the secret code to get timely help with a broken iPhone?
Details:
iPhone crashed yesterday around 5:00. Wouldn't go past Apple logo. Using the recovery mode, I have:
- Restored using my backup.
- Deleted my backup and restored to a "new phone".
- Re-downloaded and re-installed iTunes, deleted my backup, and restored to a new phone.
- Uninstalled iTunes, deleted all ipsw files, redownloaded and reinstalled iTunes and restored to a "new phone"
After each of these, the situation is the same. The phone works (albeit very slowly and unevenly) until I turn it off (off off, not standby). When I turn it back on, stuck at the apple logo again.
So now I sit at the apple store, hoping someone will miss their appointment and I can sneak in off the standby list. What a joke. I'm definitely going to have to swing by the at&t store and see about switching to a phone that has adequate support when it breaks. I love the iPhone interface, but with a complete meltdown in the first 6 weeks of ownership and the long wait to see someone to get it replaced, it's just not reliable enough as a phone (not to mention the fact that the 3G really isn't ready for primetime). Sigh.

Tamara wrote:
Make an appointment at the Genius Bar - http://www.apple.com/retail/geniusbar/ . You can also do it in store on any of the Macs there. It beats sitting around hopping a slot will open up.
I did both - I scheduled the earliest available appointment, but it was hours away and I needed my phone, so I tried waiting for a hour or so as well.
deggie wrote:
See my answer to your last post.
Are you some sort of VIP that I don't know about? Why should you get to just walk in and have your problem solved when others made a Genius Bar appointment and showed up for it.
I don't think I'm better than anyone else. I think anyone with a broken phone should be able to get immediate assistance. I wasn't looking for training in how to use my phone, or assistance with some obscure functionality - the freaking thing wouldn't turn all the way on and couldn't be used for it's primary purpose, that of a mobile phone.
Tenacious MC wrote:
I suppose you do the same thing when walking into a doctor's office without making an appointment and expect him to see you about your cholesterol being high? You'd go into an ER for an emergency like a broken arm but you're gonna have to wait in line just like everyone else unless it's a life-threatening condition.
See my response above. If my phone wasn't "feeling well", I could live with waiting to talk to someone. But my phone was in a persistent vegitative state and deserving of urgent care.
The one time I had a problem with my Motorola RAZR, I walked into an at&t store and the next available person helped me out (by replacing the nonfunctional phone). I didn't have to make an appointment with a special subset of the staff. I would expect Apple, the actual manufacturer (and, in my case, vendor) of the phone to at least meet the standard that at&t sets for phones they don't even manufacture.
And I hope for the sake for Apple's enterprise penetration plans that they don't share your misconception that this is just a matter of "hampering my lifestyle". It's a matter of interrupting mission critical infrastructure functionality.

Fastest way to get data from Multiple lists across multiple site collections

HI
I need to get data from multiple lists which spread across 20 site collections and need to show it as list view.
I have searched on internet about this and got some info like options would be to use search core APIs or BCS . I can't use search because I want real time data. Not sure of any other ways.
if anybody can provide ideas it would be help.

Might LINQ be an option for you? Using
LINQPad and the
SharePoint Connector, you should be able to write a query that'll retrieve this data, from which you can tabulate it. I'm not sure how you'd be able to automate this any further so that it's then imported in as list.
For something more specific, I used a third party tool called the
Lightning Tools Lightning Conductor, which is essence a powerful content roll-up tool. In one of my solutions, I created a calculated column that gave an order / ranking on each item, so that when lists were combined, they'd still have some form of
order. The web part is also fairly customisable and has always proven a useful tool.
Hope that helps.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Fastest way to get count

Hi
I am having big table "BT" around 5,00,000 records in a table. this table is having various columns
a, b,c,d,e,f,g .....etc
I am having following indexes on a table
1/ unique index a, b, c, d, e, f, g
2/ index a, b, c, d
3/ index a, b
4/ index a, o,p,q
5/ index r, s, t, u, v
I am doing count(*) on a table where e = < some condition > and g = dt
It is doing fast index full table scan. But it is taking more than 30 mins.
I can not activate parallel query option. Can it be done faster way ?
thanks & regards
PJP

The only index that contains both e and g is the first one and it's pretty wide. I agree with cd, you should try an index on g,e or e,g. remember, the order of columns in an index is a strategic decision so you need to consider things like the uniqueness of e and g. In general put the more unique one first. You also need to consider how often e and g are used in other queries. In general, the column referenced in the where cluse of the most queries should be placed first. The 2 general recommendations I mention sometimes contradict each other and that is where you need to make a judgement call

Fastest way to get iPod videos from EyeTV?

I've got an EyeTV 200 hooked up to my MacBook Pro to record TV shows for playback in iTunes and on a video iPod. Right now, I must record the show with the EyeTV, then convert the recording for the iPod. That extra step doubles the time needed to get an iPod-friendly show.
Can EyeTV record the content directly to an iPod-friendly format? I tried recording in mp4 format and then pulling from the EyeTV recording package just the mpg movie file. But neither QuickTime nor iTunes recognizes the file. VLC does, but that isn't the goal.
If EyeTV can't do this in one step, is there some other hardware/software combination that will? Elgato's Turbo.264 device seems to simply speed up conversion of already existing video files -- again a two-step process, albeit faster. It would be ideal if it could record and encode for the iPod at the same time.
Thanks!
Message was edited by: Steve Porritt
Message was edited by: Steve Porritt

Might LINQ be an option for you? Using
LINQPad and the
SharePoint Connector, you should be able to write a query that'll retrieve this data, from which you can tabulate it. I'm not sure how you'd be able to automate this any further so that it's then imported in as list.
For something more specific, I used a third party tool called the
Lightning Tools Lightning Conductor, which is essence a powerful content roll-up tool. In one of my solutions, I created a calculated column that gave an order / ranking on each item, so that when lists were combined, they'd still have some form of
order. The web part is also fairly customisable and has always proven a useful tool.
Hope that helps.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Back to English Lang at reboot, Fastest way to start WM, Yaourt error

Hi guys I need some help,
I installed arch yesterday. I set every thing to "Turkish" i had no problems till this morning. I started my computer and the language was back to english.
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="tr_TR.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Istanbul"
KEYMAP="trq"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
[/quote]
[color=#FF0000]
In my locale.gen is only turkish uncommented.
What is the fastest way to get the WM loaded. I'm not using a login manager but i won't every time type "xinit /usr/bin/openbox-session". I will autologin and autoload the WM.
xinitrc will open a security hole because it won't lock the virtual terminal and I'm not sure if a bash script is the right way. What would you suggest?
The last time I installed yaourt I had the problem that it couldn't find any packages from the AUR. Do I have to do someting to make it work after I installed it? I tried it out-of-box.
And if somebody is right now using ubuntu can he give me the screenshots for the font settings in firefox and gnome font settings (right click menu settings).
Thanks to everyone who wants to help or just look at this thread.
Last edited by Pliskin (2011-01-01 13:23:32)

Happy new year everybody
I just solved the locale problem. If someone (like me) will use the autostart.sh in the official openbox site will get this error. Look at this:
# Run the system-wide support stuff
. $GLOBALAUTOSTART
# Programs to launch at startup
hsetroot ~/wallpaper.png &
xcompmgr -c -t-5 -l-5 -r4.2 -o.55 &
# SCIM support (for typing non-english characters)
export LC_CTYPE=ja_JP.utf8
export XMODIFIERS=@im=SCIM
export GTK_IM_MODULE=scim
export QT_IM_MODULE=scim
scim -d &
# Programs that will run after Openbox has started
(sleep 2 && fbpanel) &
I removed the ja_JP.utf-8 and this problem was solved. Thanks for @Cedeel and @karol for their help.
Now I still don't know in which way I should load my openbox. Details in the first post

SxS to ProRes the fastest way?

What is the fastest way to get from SxS to ProRes?
Is importing with FCP and using Compressor/Episode Pro on a Mac Pro/Xserve faster than putting the cards into a AJA KiPro and using that convert then adding the media to the Xsan over FW800?
Are there other bits of kit that let you take SxS cards and pump out ProRes?
Thanks

Thank Brian for your comment. That is getting people editing fast but not converting all the media to ProRes
I am trying to get the media to ProRes the fastest way which is subtly different. I know you can cut long-GOP and set the Render Control Codec to ProRes but I actually want to convert everything than comes in from the EX cameras, back it up and then put it on which ever San volume it is required on.
Sounds like there isn't a bit of kit that will help too much. Just need to throw Processors & RAM at the conversions...

HT5192 What is the easiest and fastest way for me to get the iOS 5.1 update for my ipad2?

What is the easiest and fastest way for me to get the iOS 5.1 update for my ipad2? I am non tech savvy and am a new user to apple devices.

If you are already running iOS 5 on your iPad go to Setrings>General>aoftware Update and you can update over the air via WiFi. If you are not running iOS 5 you have to connect the iPad to your computer and update via iTunes.
Instructions here.
http://support.apple.com/kb/HT4623

Is there any way to get the "dictation" functionality of iPhone 4S to work on an iMac computer?

The iphone dictation feature is great. It is available on 4s, but not 4 or earlier phones. It is able to keep up with a normal speaking voice, and even counting the time to correct the (few) errors in the transcription, one can create text much faster than even the fastest typist. I know Dragon has software for this. Might there be a way to get dictation to work on a Mac wihtout having to buy the Dragon software?

Hello:
What you are describing is, I think, a function of iOS. OS X does not have that capability (to my knowledge, at least).
Barry

Fastest way to get overset textframes

Similar Messages

Maybe you are looking for