Fatal Error Code 6 "Invalid Play List"

Ughh, trying to burn a Blu-ray project and I get this error before Encore can even burn the disc. Using Encore CS5.5.1
Any suggestions?
Kellso

Thanks Bill,
The menu is a template that I purchased from Precompossed Pro Motion Menus.
I edited in FCP, exported at a Quicktime file, Encoded with Media Encoder 5.5 I noticed that one of the menu assest has a little green icon but the others have a orange and red.
Where do I find the details of the play list?
Thanks

Similar Messages

EVENT 36888, Schannel A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252.

I keep losing my network connection for a few seconds at a time. Not a big deal unless I just spent time filling in a form and have to redo it.
Getting:
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252. Using windows 8. I just installed the new ARRIS
TG862 provided by Comcast.
Any Ideas?
Also get the following errors in my events:
The name "WORKGROUP :1d" could not be registered on the interface with IP address 10.0.0.2. The computer with the IP address 10.0.0.3 did not allow the name to be claimed by this computer.
Realtek PCIe GBE Family Controller is disconnected from network.
Any help is appreciated

Hi,
Critical Kernel-power event ID 41 is used appear after PC restarts or randomly restarts with error
BugcheckCode listed or a cold reboot. Do you get BSOD and some dump files?
Default location is %SystemRoot%\Minidump. You can upload it to skydrive, then paste link here.
How to use Skydrive
http://www.wikihow.com/Use-SkyDrive
Kernel-PnP event ID 219: A Plug and Play device driver on your system is failing to load due to a device driver or device malfunction, you can unplug any external devices (except mouse and keyboard, but please keep the latest drivers), and
check device status in device manager, please also keep the all latest driver update of your PC.
And for error 36888, I found a similar thread, please refer to this link
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4c5430f5-43f6-41b4-97d3-03cfb3efa70b/schannel-error-event-id-36888-is-there-a-way-to-identify-what-causes-schannel-to-log-error?forum=winserverDS
Regards
Yolanda
TechNet Community Support

Blu-ray: "fatal error", Code: "6"; "Note:"

Blu-ray: "fatal error", Code: "6"; "Note:"
That's the error I got when Encore CS3 started to actually write to the bluray burner.
It's worked many other times but this time it did everything except the burn.
If I reboot or change blanks it doesn't seem to matter. When it gets to the stage of starting to write to the disc, I get the message above.
Real helpful, right?
Hope there some "real" help here.
Thanks,
Steve Garman
HP XW8200 3.4 gig Xeon Dual and 4 gigs ram. XP Pro with SP2.

I can't seem to get any response here so I'm wondering if there is any list of Encore errors on the Adobe site? Errors like this are pretty meaningless unless you have a list of explanations. Any cluses who might have one?
Thanks,
[email protected]

JDBC Receiver: FATAL ERROR document format: invalid level 4

Hi,
I am creating an IDOC -JDBC scenario .
The XML created has action as delete.
but in the comminication channel i am getting an error which is
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'T_SAP_WBS' (structure 'statement1'): java.sql.SQLException: FATAL ERROR document format: invalid level 4' found (structure 'statement1')
does any one have any idea on this?
Regards,
Tarun Bahal

Hi,
The JDBC format which you are using is incorrect.....please maintain the format as mentioned in this document...there seems to be some mismatch
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
By maintaining the format i mean:
1) maintain the hierarchy as mentioned in the link
2) maintain the case (upper/ lower) for the standard elements (you seem to be using statement1 instead of Statement)
3) If there are no multiple stattements then have the name as Statement
If still facing the problem....provide your structure in sdn
Regards,
Abhishek.

Blu-ray Error: fatal error, code 6, audio buffer underflows...

Ughh.... So its been a few months since I stopped using CS6 Encore because it loves to crash for all kinds of bad reasons. Today I needed to do a new project, and used a simple 1920x1080p MP4 file created by Adobe Media Encoder, and used a basic menu template in Encore. Also added a slideshow timeline with one Mp3 audio set to loop. During the building image part of the build process, I get the fatal error code 6, audio buffer underflows. Total bitrate too high neat time = 0.00000 seconds -
First off, I set the BR transcode setting to auto and it spends pleanty of time transcoding the file to a 15mbps bitrate, so why is Encore not first taking care of all the source files correctly in transcoding...?

Ok.... 100% the fault of the software. I am an SE, and build systems all the time for my business, so if I knew of these simple problems, Id go into the code and devise a solution...please Adobe, fix Encore.
Here are my simple finding from solving this problem (first post):
- Of the 2 simple Mp4 files produced by Media Encoder, one, which runs only 2 minutes, had a peak of a little over 10mbps. I dropped the file back into Encoder and set the same mp4 profile to max of 6mbps and then replaced the file in the encore project, ran build and it worked fine.
SO.... If I can use a simple free bit of software to look at the bitrate of a file (google Bitrate Viewer) and determine that the peak was possibly too high, why oh why cant adobe write a better transoding logic algorythm to decide if a video in a timeline needs to be reprocessed at a slightly lower bitrate before just attempting a build and then throwing an error. For the love of all that is holy, please tweek your transcoding decision process to prevent these simple errors.

I have a 1654 error code and is not listed....what do I do?

i have a 1654 error code and is not listed. what do I do?

Try disabling the Ask Toolbar extension.

HP mini 110-1116NR laptop fatal error code CNU939DV7 askin for password

Upon startup it asks for current password. When you enter it 3 times wrong it says fatal error code CNU939DV7. Ive tried every password on the help site but none were for the same fatal error code. Please Help!
This question was solved.
View Solution.

Hi,
Try the below code
e9lofo1t6x (3rd letter is L)
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

I just updated my 3gs to the latest iOS 5 update and now I am unable to text certain numbers. I keep getting the error code 1121611611 invalid number, even though the number I have in my contacts is a 10 digit number. Any suggestions on fixing this?

I just updated my 3gs to the latest iOS 5 update and now I am unable to text certain numbers. I keep getting the error code 1121611611 invalid number, even though the number I have in my contacts is a 10 digit number. Any suggestions on fixing this?

PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

[LDAP: error code 49 - Invalid Credentials]

New to OID. Using Jdev 10.1.3 and then have following code. user is apenlast and password is penlast2.
I want to get all the attributes for this user from OID. But I keep getting this error.
javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
Actually from SSO login screen, if I try login using apenlast/penlast2 I can successfully login to OID. Then why this error from code ??
InitialDirContext ctx1 = ConnectionUtil.getDefaultDirCtx
( "ormi://br-dev3.fjcs.net:399",
"389",
"cn=apenlast",
"penlast2" );
System.out.println("TTTTTTTTTTTTTTTTTTTTT "+ctx1.getAttributes("uid"));

probably you're not using using the fully qualified DN.
the users are stored by default under cn=users,dc=yourDOMAIN
so u should try cn=apenlast,cn=users,dc=yourDOMAIN.
regards,
--Olaf

LDAP: error code 21 - Invalid Attribute Syntax

I have written a java program to create an LDAP user. Sometime it works fine but sometimes it gives error. Detailed error is given below:
createLDAPAgencyUser() : Inside Exception - javax.naming.directory.InvalidAttributeValueException: [LDAP: error code 21 - Invalid Attribute Syntax]; remaining name 'uid=VINMUMBAI,ou=fci,o=cw,c=in'
javax.naming.directory.InvalidAttributeValueException: [LDAP: error code 21 - Invalid Attribute Syntax]; remaining name 'uid=VINMUMBAI,ou=fci,o=cw,c=in'
     at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3001)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
     at com.sun.jndi.ldap.LdapCtx.c_createSubcontext(LdapCtx.java:777)
     at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_createSubcontext(ComponentDirContext.java:319)
     at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.createSubcontext(PartialCompositeDirContext.java:248)
     at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.createSubcontext(PartialCompositeDirContext.java:236)
     at javax.naming.directory.InitialDirContext.createSubcontext(InitialDirContext.java:176)
     at LDAPAgencyCreation4C.createLDAPAgencyUser(LDAPAgencyCreation4C.java:123)
Stop main method.
     at LDAPAgencyCreation4C.main(LDAPAgencyCreation4C.java:45)
Does anyone have idea to resove it, please let me know.
Thanks in advance,
Vinod Shivhare

I got the solution. One attribute which I was sending it's name was incorrect. Attribute names are very case sensitive.
-Vinod.

Javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Cre...

Sir/Madam,
i am working on Windows Platform and I am getting this error when i want ot configure the LDAP.
Please suggest
javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
     at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3005)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2951)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2753)
     at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2667)
     at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:287)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
     at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
     at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at javax.naming.directory.InitialDirContext.<init>(InitialDirContext.java:82)
     at TestClient.main(TestClient.java:33)
Thanks in advance.
Regards
Neelamadhab

javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]LDAP is rejecting your credentials (username / password). Make sure your credentials are coorectly given, otherwise get help from LDAP admin.
regards,
Sekar

"[LDAP: error code 34 - Invalid DN]" Why?

Hi all, I have the following problem, when I try to test my Plumtree connection to LDAP Sun One Server I get the following error message:
Attempt to connect to LDAP Server failed. Double check your installation and logon credentials.
Could not create InitialDirContext: [LDAP: error code 34 - Invalid DN] [LDAP: error code 34 - Invalid DN]
I have entered LDAP URL: georgi.masq
LDAP port: 49129
ldap user: admin
ldap pass: XXXXXXX
With this parameters I can login into SunOne ADmin Console, unfortunately something's wrong and I don't know what, if anyone has any ideas please tell me .

Hi all, I have the following problem, when I try to
test my Plumtree connection to LDAP Sun One Server I
get the following error message:
Attempt to connect to LDAP Server failed. Double
check your installation and logon credentials.
Could not create InitialDirContext: [LDAP: error code
34 - Invalid DN] [LDAP: error code 34 - Invalid DN]
I have entered LDAP URL: georgi.masq
LDAP port: 49129
ldap user: admin
ldap pass: XXXXXXX
With this parameters I can login into SunOne ADmin
Console, unfortunately something's wrong and I don't
know what, if anyone has any ideas please tell me .
Hi all, I have the following problem, when I try to
test my Plumtree connection to LDAP Sun One Server I
get the following error message:
Attempt to connect to LDAP Server failed. Double
check your installation and logon credentials.
Could not create InitialDirContext: [LDAP: error code
34 - Invalid DN] [LDAP: error code 34 - Invalid DN]
I have entered LDAP URL: georgi.masq
LDAP port: 49129
ldap user: admin
ldap pass: XXXXXXX
With this parameters I can login into SunOne ADmin
Console, unfortunately something's wrong and I don't
know what, if anyone has any ideas please tell me .Hello actually I have the same error, maybe someone have the solution.
Or what did you do for resolve this error?
Thanks for your collaboration!!

LDAP: error code 1 - Invalid query reference]; remaining name '

I have the following function for a paged search operation.
Data retrieved by this function is used somewhere else to modify the Ldap Directory context.
Despite my setting for ctx and search control as "no timeout", i've been keeping thrown the exception for operations lasting more than 5 minutes(consistently) and for some short operations(sporadically):
Paged Search failed : javax.naming.NamingException: [LDAP: error code 1 - Invalid query reference]; remaining name '<directory>'
I am using DirX as LDAP directory.
Is this a time-out related exception which can be fixed in the code?
How can it be fixed?
There's no clue all over the web about this.
Thanks.
      * Returns the next page of the search results.
      * The returned result from this method can not exceed page size
      * set in the constructor.
      * @return
     public NamingEnumeration nextPage(){
          //1.step Set PagedResultsControl
          NamingEnumeration results = null;
          Control[] controls=null;
          try {
               if( isSearchStarted==false ){
                    isSearchStarted=true;
                    if(sortingAttributes==null)
                         controls=new Control[]{ new PagedResultsControl(pageSize) };
                    else
                         controls=new Control[]{new SortControl(sortingAttributes, Control.NONCRITICAL), new PagedResultsControl(pageSize) };
               }else {// examine the response controls
                    cookie = parseControls(ctx.getResponseControls());
                    if( cookie!=null && cookie.length!=0 ){
                         // pass the cookie back to the server for the next page
                         if(sortingAttributes==null)
                              controls=new Control[] { new PagedResultsControl(pageSize, cookie, Control.CRITICAL) };
                         else
                              controls=new Control[] {new SortControl(sortingAttributes, Control.NONCRITICAL), new PagedResultsControl(pageSize, cookie, Control.CRITICAL) };
                    }else{
                         //search is finished
                         return null;
               ctx.setRequestControls(controls);
               //ctx.getEnvironment().values();
               //ctx.getEnvironment().put("com.sun.jndi.ldap.connect.timeout", "5000", 300000);
               ctx.addToEnvironment("com.sun.jndi.ldap.connect.timeout", "0");
               //ctx.getEnvironment().values();
          } catch (NamingException e) {
               Tracer.getInstance().error("Paged Search failed while setting response controls: " + e);
               return null;
          } catch (Exception e) {
               Tracer.getInstance().error("Paged Search failed while setting response controls: " + e);
               return null;
          //2.step: DO SEARCH
          for(int i=0;i<10;i++){
               boolean reconnect=false;
               try{
                    results = ctx.search(searchBase, searchFilter, searchCtls);
                    Thread.sleep(300000);
                    //ctx.get
                    //Thread.sleep(300000);
                    break;
               } catch (NamingException e) {
                    Tracer.getInstance().error("Paged Search failed : " + e);
                    reconnect=true;
               } catch (Exception e) {
                    reconnect=true;
                    Tracer.getInstance().error("Paged Search failed : " + e);
               if(reconnect){
                    try {
                         this.ctx = LDAPServer.getInstance().getDirContext();
                         ctx=ctx.newInstance(controls);
                         //ctx.getEnvironment().values();
                    } catch (NamingException e1) {
                         Tracer.getInstance().error("Could not reconnect the ldapcontext");
          return results;
     }

It turned out to be a DirX "root DSE" entry "PAGP" that is disposing my paged results if a timeout occurs(300 seconds by default).
So i have to modify this entry during runtime, which is unfortunately only can be accesed by dirxadm.exe.
Is it possible to modify this attribute by a ldap context method?

Please Help Me! Encore giving error message on Build: "fatal error", Code: "6", note: "video buffe

Hello,
I have been trying to build a project (a 50gb Blu Ray disc) for the last couple of days and I keep getting an error message I have never gotten before. The error says: "fatal error", Code: "6", note: "vide buffer underflows Total bitrate is too high near..."
I don't know why this is happening. I build this entire project from the ground up once before using the exact same assets but I accidently deleted that project file so I had to put it together again. But it was practically identical. And it would build the project just find. I deleted the cache folder. I deleted the main video timelines and recreated them. I made sure the transcode settings for bitrate were not too high. I did everything I can think of.
Can someone please help me? I have no idea what to do now. The frustrating thing is that the error message doesn't tell me what asset the problem is with or anything. This is a rather complicated project. I have two full length movie files (about 90 minutes each) and seven video special features. I have five audio tracks and a couple of subtitle tracks. I don't have any idea what asset is causing the problem!
But I used all these same assets before and I built the project perfectly. And it is not the subtitles because I deleted the subtitle tracks and I still got the error message.
Is there any way of knowing what assets are causing the problem? How can I fix this?
I have a number of people who are waiting for the completion of this disc so I need to get this resolved pretty soon.
Thanks.

The error says: "fatal error", Code: "6", note: "vide buffer underflows Total bitrate is too high near..."
What is the rest of the error message?
What version of Encore and what operating system?
using the exact same assets
What format? Already transcoded m4v/a3c 5.1 or what? Does Encore show them for Bluray as "Do Not Transcode"?
What were the export settings, particularly bitrate?
Is there any way of knowing what assets are causing the problem?
Not through the error message.
Rather than deleting elements to see what causes it, I would add elements (e.g. you got the error, deleted the subtitle tracks, and still had the error, leaving the possibilit that a cache or similar is contining the problem even if the subtitles caused it).
So add just the menus and timelines, no extra audio, no subtitles,
When starting a new project, make sure you are using a new name for the project.

CS6 - Blu-ray Error: "Fatal Error", Code: "6"

Greetings,
I have gone through about 15 Blu Ray Disks in the past week, trying to burn one wedding project.
When i burn to DVD - its fine... but when i choose Blu Ray, it gets about 1 hour in and then comes up with 'Blu-ray Error: "Fatal Error", Code: "6".
I have tried to re-export all files for burning, in two different blu ray formats - but it continues to come up with the same.
I have used Encore for years but have just upgraded to CS6 and im getting these errors.
What am i doing to cause this?
Thx,
James

Try this first:
Strange Errors in En? Project Changes Not Showing Up? Try This!
Then type "fatal error code 6" into the "Ask A Question" box at the top of the main Encore Forums page, or the top of the Discussions page.
You'll get 5 very relevant topics right away.
Jeff

Fatal Error Code 6 "Invalid Play List"

Similar Messages

Maybe you are looking for