Fatal error in recovery manager

Hi,
I am trying to restore my DB for disaster recovery, I have taken a backup earlier in flash_recovery_area with controlfile autobackup on.
I have successfully restored spfile and controlfiles, but when I am running restore database, rman is crashing:
RMAN> startup force mount;
RMAN> restore database;
Starting restore at 17-JUL-13
Starting implicit crosscheck backup at 17-JUL-13
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=170 device type=DISK
Crosschecked 4 objects
Finished implicit crosscheck backup at 17-JUL-13
Starting implicit crosscheck copy at 17-JUL-13
using channel ORA_DISK_1
Finished implicit crosscheck copy at 17-JUL-13
searching for all files in the recovery area
cataloging files...
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatal error during execution of command
ORA-01092: ORACLE instance terminated. Disconnection forced
RMAN-03002: failure of restore command at 07/17/2013 23:44:08
ORA-03113: end-of-file on communication channel
Process ID: 10307
Session ID: 162 Serial number: 9
ORACLE error from target database:
ORA-03114: not connected to ORACLE
please help me out identifying the issue.
thanks,

this directory is actually empty : /scratch/oradba/db/apps_st/zDB/dat/
It had all data files earlier, but to try disaster recovery I manually removed all of them to bring them back from backup.
I am following all these steps: Hemant's Oracle DBA Blog: RMAN Backup and Recovery for Loss of ALL files
but at restore database, its crashing out.

Similar Messages

Error from Recovery Manager on HP Mini-110 1135CA

Hi,
after having a hard disk crash I had to order the Recovery Disks from HP called System Recovery DVD Windows 7 Starter EM and after going through the steps two times, it always fail at the end with error message: "The recovery attempt failed. Select one of the following buttons: Save Log, Details, Retry.
I chose Retry twice to be sure it was not a external DVD problem or something else.
I also saved the Log if anyone want to see the log, I have the SRD file generated which is not readable with Notepad or Wordpad. I could send it to you.
Any one had this or have ideas what makes this error?
-GG

Actually I found the same error message on another forum threat.
Here is my Error taken from CROError.flg file opened when I click on Details.
TDC Preinstall diagnostic Tolls for Windows 7-TDC
Error Different LOC# detected
Error SKU number LOC#=00
Error OptionDashCode.ini value for ABC=12
Error: SKU number incorrect for this LOC#=ABC
Next Step Please dash SKU number with xxxxxx-12x
Next Step or use EEPROM and change LOC# in either SKU Number or CTO Localization Code
Could it be wrong Recovery Disks that HOP sent me also?
-GG

RMAN TSPITR 600 fatal error

Hi, I run RMAN TSPITR and got a RMAN-00600: internal error. could anyone see the follwing ouput and give some advice?
thanks.
------------------output from RMAN ---------------------
run{
allocate clone channel c1 type disk;
allocate clone channel c2 type disk;
recover tablespace "RMAN" until time '2002-Dec-16 13:19:10';
allocated channel: c1
channel c1: sid=10 devtype=DISK
allocated channel: c2
channel c2: sid=11 devtype=DISK
Starting recover at Dec 16 2002 17:00:09
printing stored script: Memory Script
# set the until clause
set until time "2002-Dec-16 13:19:10";
# restore the controlfile
restore clone controlfile to clone_cf;
# replicate the controlfile
replicate clone controlfile from clone_cf;
# mount the controlfile
sql clone 'alter database mount clone database';
# archive current online log for tspitr to a resent until time
sql 'alter system archive log current';
# resync catalog after controlfile restore
resync catalog;
executing script: Memory Script
executing command: SET until clause
Starting restore at Dec 16 2002 17:00:09
channel c1: starting datafile backupset restore
channel c1: restoring controlfile
output filename=/orabackup/aux/control01.ctl
channel c1: restored backup piece 1
piece handle=/orabackup/df_ECAZ3_56_1 tag=null params=NULL
channel c1: restore complete
Finished restore at Dec 16 2002 17:00:11
replicating controlfile
input filename=/orabackup/aux/control01.ctl
sql statement: alter database mount clone database
sql statement: alter system archive log current
starting full resync of recovery catalog
full resync complete
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00579: the following error occurred at 12/16/2002 17:00:21
RMAN-00601: fatal error in recovery manager
RMAN-03012: fatal error during compilation of command
RMAN-03028: fatal error code: 600
RMAN-03013: command type: recover
RMAN-00600: internal error, arguments [5502] [] [] [] []

Is the receovery catalog in the same database you want to recover?

Recovery Manager could not restore Presario CQ56 & system won't boot, gives error BOOTMGR is missing

1. Product Name and Number
Compaq Presario CQ56
2. Operating System installed (if applicable)
Windows 7
3. Error message (if any)
from error log:
Hard Disk (result-failed) id# UAMBXQ-5H06AK-XD003F-618U03 HARD DISK 1
Start-up (result-failed) id# UAMBXQ-5H60AK-XD003F-40G403 MEMORY MODULE 2
4. Any changes made to your system before the issue occurred
There were no changes made to the computer, prior to the restore the computer would boot up, however, it would freeze after the system was up and running. Restarting the computer did not help and when I tried to restore it to an earlier point it said that it was unable to complete the restore. I then tried to the factory reset, however, it gave me an error message: "Recovery Manager could not restore your computer using the factory image. Please contact HP support. Error code: 0xe0ef0003. When I tried to restart the computer afterwards, it gave an error message: "BOOTMGR is missing, Press Ctrl+Alt+Del to restart". How do I fix this?
This question was solved.
View Solution.

Hello crossurmind.
What sorts of issues led up to the computer originally not booting? Were you getting a lot of blue screen errors?
The two items you posted from the error log seem to indicate that it is having trouble reading the hard drive and possibly the memory. After trying the restore it seems that it failed causing the boot section of the install to "not be found."
I think you should begin by using the built in tests for the hard drive and memory located in the BIOS. Follow this document to perform the hard drive test. All you'll have to do is repeat the process and select "memory" in order to perform the memory test. Make sure to post the result of both of these tests.
I will await the results; have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

----- HPConnectionManager.exe - Fatal error --

hp manager is on the fritz. how important is it and how do i resolve the error?---------------------------
HPConnectionManager.exe - Fatal error
HP Connection Manager Service has stopped responding. Please exit and restart the application.
A fatal error occurred, check the HP Connection Manager in Event Viewer for more details.
Retrieving the COM class factory for component with CLSID {24DB46C8-C842-4E91-9AC4-8A9525A5551D} failed due to the following error: 80080005.
OK
---------------------------

aondolumun wrote:
I did that but it didnt work. yes I connect.wireless most ofthe time and.transfer.files by bluetooth so I.guess I.need it. I reinstalled.from the reco ery manager same.error msg.You do not need the HPConnection Manager to make those connections. You can uninstall it without a need to reinstall it.The function of the HPConnection Manager is to make it easier to make connections for people who have trouble making wireless or bluetoothconnections. If you know how to pair with bluetooth, make file transfers and have no problem with making a wireless connection on your own, then you can uninstall it. regards,erico

Fatal error in startNodeManager.sh

I when I try to start the node manager I obtain the following error:
<Fatal error in node manager server> java.net.UnknowHostException: startNodemanager.sh
thanks any help

Check nodemanager.properties whether the nodemanager IP is valid.

HP Connection Manager Fatal Error

When I boot up my HP Pavilion dv6t, a popup will appear and say
HPConnectionManager.exe - Fatal error
A fatal error has occured, check the HP Connection Manager in Event Viewer for more details.
Object reference not set to an instance of an object.
I've tried repairing but that didn't work and I've also downloaded HP Connection Manager version 4.1.25.1 but that didn't do anything. Someone help?

Well, I fixed it. I restored my computer because my HP Recovery Manager wasn't working so that fixed everything . Although, with any old restore, you have to transfer everything back onto your computer, which took hours

HP Recovery Manager failed. Error code = FFFFFF9

Hello
I used the HP recovery manager to create a backup of my exisiting laptop onto an external hard drive because I selected the 'minimized image recovery option'. The laptop finished and now I am trying to restore the files. But when it gets to 96% is stops and I get:
HP Recovery Manager failed. Error code = FFFFFF9
I click next and I am back to square one. I have tried many times. I really need these files (~40GB) they were very important to me.
Please help.

UPDATE:
I have resolved this.
After looking on my computer I have noticed that despite the error message popping up at 99%, the files are indeed there in their own folder called "System Recovery Files".
To access the folder I used this video:
https://www.youtube.com/watch?v=FzmX7ZW6C9Q

Fatal Error with Java ME Device Manager and SDK Updates

I recently installed the Java ME 3 EA SDK Platform which looks promising. Everything seem to work fine. In the process of new updates and the desire to remove some older versions of Java, I installed a new Java versions (1.6.0_11) and removed some old ones (1.6_0_04 and 1.6_0_10).
Following this whenever I startup my machine, following the attempted start of the Java ME Device Manager, I get a "Fatal Error: Cannot start child. Error code: 0" dialog.
Following this I get an exception indicating:
java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:519)
     at java.net.Socket.connect(Socket.java:469)
     at java.net.Socket.<init>(Socket.java:366)
     at java.net.Socket.<init>(Socket.java:180)
     at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
     at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
     java.net.ConnectException: Connection refused: connect
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
     at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
     at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
     at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
     at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
     at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
     java.net.ConnectException: Connection refused: connect]
     at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
     at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
     at javax.naming.InitialContext.lookup(InitialContext.java:392)
     at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1871)
     at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1841)
     at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
     at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:323)
     at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.lookupMBean(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.findObject(Unknown Source)
     at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.openConnection(DevicemanagerHelper.java:56)
     at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:73)
     at org.netbeans.modules.j2me.cdc.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:228)
     at org.netbeans.modules.j2me.cdc.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:65)
     at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:419)
     at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:340)
     at org.netbeans.ModuleManager.enable(ModuleManager.java:888)
     at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
     at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
     at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
     at org.netbeans.core.startup.Main.getModuleSystem(Main.java:163)
     at org.netbeans.core.startup.Main.start(Main.java:315)
     at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
[catch] at java.lang.Thread.run(Thread.java:619)
When I try to start the SDK itself, I also get "Cannot find java.exe in specified jdkhome. Neither E:\java\jdk1.6.0_10\jre\bin\java.exe or E:\java\jdk11.6.0.0_10\bin\java.exe exists. Do you want to try to use default version?". This also happens with I try starting Netbeans as well.
When I say No, it appears to not start at all. When I say Yes, it appears to try to start but I continually get errors as listed above for the Java ME Device Manager startup error.
After reinstalling the _10 version, things started to work again, so I suspect this is due to my removal of the an older version of the JDK.
How is the proper way to "update" without causing similar errors? Are the environment variable JAVA_HOME, JAVA2_HOME, or some other variable used to specify the JDK/JRE in use? I would rather not be forced to change my startup each time to specify a -jdkhome related parameter.
Should I install the new version, find install the "Java Platform" in the SDK/Netbeans, set it as
Also...
How do you set the default version from within the SDK/Netbeans?
And is there a way to prevent the Device Manager from starting?
Eric

You can try this link to see if it solves your problem.
[http://java.lillegutt.com/?p=3]
Cheers,

Verizon Access Manager 7.0.8 and 10.6.3 results in fatal error -43

I am trying to get a Verizon modem (UW190) working with my Macbook Pro and 10.6.3. Using 7.0.8 of VZAccess Manager. The modem is detected properly but when you try to activate vzaccess will immediately return a fatal error -43.
If you try to connect to the network, the modem will connect, establish a ppp session but then fail (timeout) when trying to pass configuration options.
Sometimes the VZA Manager will simply crash upon launch.
I confirmed the problem on two different MacBook's both running 10.6.3.
I installed the SAME software onto an iMac with 10.6 and with the same modem it worked fine. When that iMac was subsequently upgraded to 10.6.3, the same fatal error -43 occurred and you could no longer connect with the modem. Same issue on three 10.6.3 machines.
Verizon is NOW passing this information to their tech department. No resolution for now.

Not really. I need to call Verizon and see what they say.
One user posted in the VZ forums that they were able to activate the modem on a windows box, and then subsequently it worked on their Mac.
In my case, I successfully activated the modem on an iMac running 10.6.0. and then was able to use the modem successfully on my 10.6.3 Macbook. Fixed? I don't think so. When I'm prompted to install and 'update' via the VZAccess Manager I instantly get the fatal error -43 thrown back at me. So far though, it continues to work.
--YMMV--

Recovery manager error issues

I have a Pavilion dv7-4177nr and I tried using recovery manager to set everything back to factory settings as I was having trouble with IE10. It made it to 47$% and then gave me an error code 0XE0EF003, Npow when I try to start up my laptop it says bootmgr missing. Any ideas on what I can do now/next?

Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hdd.
Did you burn a Recovery Disc set? If so boot from the first one. If no set you can order one for usually less than $20> HERE
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

"Fatal error, run database recovery " when there are no txns to recover.

Hi, all.
I have a DB file containing multiple databases. Without using DBEnvironments, I can open it to get the dbnames. I can open the databases RDONLY,
and see that their contents are correct. I can open them RW, and everything works.
But when I try to create a new one, I get this:
D = bsddb3.db.DB()
D.open('test.db',dbname='test',dbtype=B.DB_BTREE,flags=B.DB_CREATE)Traceback (most recent call last):
File "<stdin>", line 1, in <module>
bsddb3.db.DBRunRecoveryError: (-30974, 'DB_RUNRECOVERY: Fatal error, run database recovery -- PANIC: fatal region error detected; run recovery')
Note that this is in the non-transactional case. There is no Env, and there are no logfiles or __db files. So the error code mystifies me.
Strace shows that the file is opened RW, and read through.
B.DB_VERSION_STRING'Berkeley DB 4.8.24: (August 14, 2009)'
>>>
So, where to proceed? Many thanks for any and all help.

Hmm. Other thing to note:
[tradedesk@vader 2010-05-06.test]$ /usr/local/BerkeleyDB.4.8/bin/db_verify foo.db
db_verify: Subdatabase entry references page 266 of invalid type 13
db_verify: Page 0: non-invalid page 40 on free list
db_verify: trading.db: DB_VERIFY_BAD: Database verification failed
Not sure how that came about or how to prevent it, but it might have to do wit this issue.

Getting error while starting managed recovery

Hi,
I am getting error while starting managed recovery.Please suggest.
Please find below error log
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION
Attempt to start background Managed Standby Recovery process (OTP3)
Wed Jun 23 19:24:10 2010
MRP0 started with pid=50, OS id=3350
MRP0: Background Managed Standby Recovery process started (OTP3)
Fast Parallel Media Recovery enabled
Managed Standby Recovery not using Real Time Apply
Warning: Recovery target destination is in a sibling branch
of the controlfile checkpoint. Recovery will only recover
changes to datafiles.
Datafile 1 (ckpscn 296765005228) is orphaned on incarnation#=1
MRP0: Background Media Recovery terminated with error 19909
Errors in file /ora/app/oracle/admin/OTP3/diag/rdbms/otp3/OTP3/trace/OTP3_mrp0_3350.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/ora_ots_gdb1/oradata/OTP3/datafile/o1_mf_SYSTEM_REORG1_.dbf'
Errors in file /ora/app/oracle/admin/OTP3/diag/rdbms/otp3/OTP3/trace/OTP3_mrp0_3350.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/ora_ots_gdb1/oradata/OTP3/datafile/o1_mf_SYSTEM_REORG1_.dbf'
MRP0: Background Media Recovery process shutdown (OTP3)
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION

Hi,
The standby database has been activated previously but since then reverted back into its standby role. Prior to the
RMAN duplicate operation the "alter system reset control_files scope=spfile sid='*';" has not been executed (i.e. the
control files have not been overwritten).
check the incarnation on both the sides i.e primary & standby
list incarnation of database;
RMAN> reset database to incarnation 2;
database reset to incarnation 2
RMAN> exit
hope you can solve by restting the incarnation.
Thanks

Adobe Downloading Adobe Photoshop Elements 13 MultipleLanguages Windows The Akamai Download Manager has encountered an fatal error: File not found.

I am trying to download the trial of PSE 13 which consists of two files. The first downloads ok but on the second I get this message:
Downloading Adobe Photoshop Elements 13 MultipleLanguages Windows
The Akamai Download Manager has encountered an fatal error: File not found.
Same thing happens if I try to download the files individually and also in different browsers. Any ideas?

Me three. I have been trying for hours, and have used three different browsers.
I have just noticed that the URL it is trying to use is looking for ...win32.exe under a directory called win64. That sounds like a stupid typo mistake. I manually modified the URL to this instead (and it downloaded something)...
http://trials3.adobe.com/AdobeProducts/PSE/13/win32/PhotoshopElements_13_LS25_win32.exe
Now I just need to figure out how to install the product manually using the two downloaded files!?!

DB_RUNRECOVERY: Fatal error, run database recovery

I am getting this error when trying to add data to QUEUE. But after I restart my app, this error does not happen anymore.
2009-08-16 10:27:12.558990 [ERR] mod_cdr_bdb.c:370 Unable to add cdr to Queue. Error=DB_RUNRECOVERY: Fatal error, run database recovery
Does anyone know what could be the cause of the error?

Hi,
Do you know the steps that lead up to this error? Can you reproduce it?
Were there any error messages sent to the error log file? Can you confirm that you have verbose error messages turned on by always initializing one of the error callback interfaces in your environment. This will provide verbose error messages:
DB_ENV->set_errcall, DB_ENV->set_errfile, DB_ENV->set_errpfx, and DB_ENV->set_verbose.
What flags are you using when opening the environment and the database?
The procedure you have to follow when you receive this error is described here: [DB_RUNRECOVERY|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/program/errorret.html#DB_RUNRECOVERY]
DB_RUNRECOVERY:
There exists a class of errors that Berkeley DB considers fatal to an entire Berkeley DB environment. An example of this type of error is a corrupted database page. The only way to recover from these failures is to have all threads of control exit the Berkeley DB environment, run recovery of the environment, and re-enter Berkeley DB. (It is not strictly necessary that the processes exit, although that is the only way to recover system resources, such as file descriptors and memory, allocated by Berkeley DB.)
When this type of error is encountered, the error value DB_RUNRECOVERY is returned. This error can be returned by any Berkeley DB interface. Once DB_RUNRECOVERY is returned by any interface, it will be returned from all subsequent Berkeley DB calls made by any threads of control participating in the environment.
Applications can handle such fatal errors in one of two ways: first, by checking for DB_RUNRECOVERY as part of their normal Berkeley DB error return checking, similarly to DB_LOCK_DEADLOCK or any other error. Alternatively, applications can specify a fatal-error callback function using the DB_ENV->set_event_notify method. Applications with no cleanup processing of their own should simply exit from the callback function.Thanks,
Bogdan Coman

Fatal error in recovery manager

Similar Messages

Maybe you are looking for