FB03 problem, looks simple but tricky

Hi all,
Go to FB03, click document list, give company code, fiscal year, execute.
It shows a list of docs.
Go to change layout and select reference from column set and add to displayed columns. Go to display tab and select print out with date, title and page number.
Select user specific and default setting check boxes and save the layout.
Come out the screen and execute FB03 again and select the lay out which you saved and go to change layout and then to the display tab. There you will find the print out with date, title and page number unchecked. (But it was actually checked and saved).
Please explain why this is happening and suggest me solution.
Thanks in advance.

Hi Eric,
The user says:
This issue first came up after the upgrade when the date printed stopped appearing on his FB03 reports. We found the check box on the display tab of the change layout screen and it properly caused the data to appear at the top of the report. However, when we tried to save that setting with the layout, we were not successful.
he says when he could do it befor, why not now?
Please help.

Similar Messages

BPS Layout formatting looks simple but tricky - Help

Hi ,
Created a layout with the below charaterstics and Month1 give the qty for that month. It works great but
1) When there is no data i.e no qty for that month , it suppose to be blank but it gives the below out put
Currenlty :
Material     mplant DType month(qty)
552477     552477
552477     552477
552477     552477
552477     552477
552477     552477
552477     552477
552477     552477
552477     552477
552477     552477
Desired :
Material     mplant DType month(qty)
2) When there is data i.e qty for that month , it suppose to give two records but it gives the below out put
     i.e values and some more lines with material but no qty . Actually there is data for only 2 rows.
Currently :
Material     mplant DType month(qty)
552477     552477 A           10
552477     552477 B           20
552477     552477
552477     552477
552477     552477
552477     552477
552477     552477
552477     552477
552477     552477
Desired :
Material     mplant DType month(qty)
552477     552477 A           10
552477     552477 B           20
I created a macro to delete the duplicate when the number repeats but that doesnot solve because when ever I want to read the total number of rows in another macro it shows wrong total number of line because of these repeating material numbers .
How can I get the desired output ? is there any simple setting in the layout or XL with out using a complicated macros etc.........
Using sem bw 320
Please help . Thank you inadvance.
Raju
Edited by: venkat bhuaptiraju on Jan 8, 2008 6:01 PM
Edited by: venkat bhuaptiraju on Jan 8, 2008 6:04 PM
Edited by: venkat bhuaptiraju on Jan 8, 2008 6:07 PM

Thank you all for your reply very very useful tips. This is getting some how very interesting and frustating at the same time.
Bindu : I used the similar code that you gave me that works perfect it removes the rows data that I do not need but retains the format for exmple the STYLES that I applied for the data and header data
Arya : The cube has the 2 records and my below msg will clarify that the issue is not with this
Aby : Yes even, I do not understand why the those 2 columns data with no key figure values
Jeoffrey :
- I checked 3- : Layout set to From Transaction data
- I checked 4- restrictions (variables?) may not be because ...see... my below observations........
- I checked 5- ...may not be because ...see... my below observations........ BUT I am going through they
are very interesting.
Sappie :
...may not be because even for one material ...see... my below observations........
More Facts : Sorry I would have given this in the beginning.
- I am running an adhoc package that contains an existing layout which works perfect
- When I copy layout and remove all the styles and macros still it works great
- BUT when I create a new layout with exactly same setting NO CHANGE and run the SAME adhoc   package I get those material numbers repeating .........
I have both the layouts in my PC and compared but did not see any difference , Can you please look at it if you think there could be something there ? Please send me you email I can email you.
Again thank you for looking in to it, your replies are very logical.
Regards,
Raju

Form question. It looks simple, but is it...?

I have this form:
The image says it all, how can I move the circled text up to align with the top of the comments box and use multiple lines of text there, instead of at the bottom as it currently is?
The form.php code is attached.http://www.millcon.nl/Harm/form.php
The whole page is here: http://ppbm5.com/submission.html

Ben,
Thanks again for your help.
First, some background on myself, so you know you have to take it easy...
My programming background is from the days of Basic, Fortran, Cobol, RPG and - my favorite - APL. I did program econometric and statistical applications, using adanced techniques like ARIMA (auto-regressive integrated moving average) models similar to Box-Jenkins approaches. I have never progressed from APL to other, more modern languages, like C++, Java and the like. Matt Iverson is still my example of how to create A Programming Language (APL).
My business (HR consultancy) nor my hobby, videography and video editing, required me to learn these new languages.
A couple of months ago I started with DW CS4, which I have as part of the MC, because I wanted to create, together with Bill Gehrke, a new website for benchmarking hardware setups, specific for Premiere Pro CS5. See: http://ppbm5.com . Next I did a similar thing for my daughter, see http://poffertjes.ch
One of the problems we encountered with the way we worked in the past was that people had to submit their data by filling out questions posed in a VB script. Some left out relevant deatils, others made typo's like 10,000 instead of 1,000 for disk capacity, others named their video card 470 Gtx while others named them GTX 470 and so on. This caused us a lot of hard work and time to safeguard consistency in the Excel spreadsheet that we publish on the http://ppbm5.com/Benchmark5.html page.
With that in mind, I used a form maker to generate the php files to ease the burden a bit. See: PHP Form Mail Maker - A free tool to create ready-to-use web mail forms with customized auto response email | F.A.Q about PHP FormMail Generator
Now, the info I have given was not complete, in the sense that this form generator gives you three files in a ZIP file:
1. form.php, which is the layout of the form
2. form.lib.php which is used for the auto-response mail, and
3. admin.php for maintenance of the form and downloading CSV data from the forms submitted.
(I have sent these to you by PM, because of privacy considerations)
Your suggestions make a lot of sense. However, stupid noob that I am, I don't know where to paste your #php formatting statements. I deleted the OL class line and pasted your formats, but that is obviously not the way to go about is. Second problem I have is that the error correction on required fields no longer shows up correctly. Third issue is that in IE the form looks reasonably OK, the space between the comments box is slightly larger than the rest of the text, but FF leaves no space between them.
If you ever have a question about Premiere Pro or hardware, I may be able to help you, but here I'm lost.
PS. An autodidact is someone who had an idiot as a teacher. That applies to me.

Concatenate " Simple but tricky question "

Hey guys
How are u, this looked like easy problem. However, I tried so many things. I want to add a space in front of character. This is 2-character lengths field.
When I was executing this command, it is not adding up space.
If I am something wrong correct me
Here is the code
DATA: i type i ,ONE(1) VALUE ' ',FINAL(2) ,TWO(1).
i = sTRLEN( t_record-trfgr ). first it shows 1 for H
if i LE '1'.
concatenate TWO ONE '.' into final.
CLEAR:I.
i = sTRLEN( final ). its still say 1
Thanks

Saquib,
Concatenate ' '
 t_record-trfgr
 into
 final.
Following should also work:
 Concatenate
 space
 t_record-trfgr
 into
 final.
Thanks
Kam
Note: Allot points for all worthful postings

ARRAY - simple (but tricky?)

Hi, I have a simple querstion regarding Array intialization.
I know that JAVA has the functionality to declare and initialize array in one line:
String stringarray[] = { "string1","string2","string3"};
Now my question is, why separating this kind of initialization from its declaration is not allowed?
String stringarray[];
stringarray = { "string1","string2","string3"};
Thanks

Okay, let me try again.
In order to create an array, the compiler needs to know what type of array to create. If I have code like this:
Object[] o;
o = { new Long(1), new Long(2) };The compiler could create either an Object array, a Number array, or a Long array, and the code would run fine. Except that somewhere along the line your code might have expected something different and a class-cast exception would get thrown.
So, to keep it simple, the rule seems to be that arrays can only be created when it is explicit what type is going to be created - in other words when there is no chance for ambiguity. The following lines don't have any ambiguity:
// a variable declaration gives the explicit type to use
Object[] o = { new Long(1), new Long(2) };
Number[] n;
// the "new" operator explicitly tells what type to use
n = new Number[] { new Long(1), new Long(2) };SO, although the following seems pretty obvious to a human viewer:
Object[] o = { new Long(1), new Long(2) };
// versus
Object[] o;
// some code here ..
o = { new Long(1), new Long(2) };The second part introduces the possibilty of ambiguity, because the array creation isn't part of a statement that explicitly tells the compiler what type of array to create. Take for example:
Number[] n = { new Long(0), new Long(1)};
Object[] o;
o = n;Which shows how an array of one type can be assigned to another that is part of the heirarchy.
As I mentioned above, I agree that this should be allowed, but I believe it was left out of the language because of the issues I've mentioned.

Simple But tricky for me

Hi All
I have a table like below
application_id | Page_name | Group_name | Question_name | Data
123 App1_Fina_1 Lia_Loan1 Type PersonalLoan
123 App1_Fina_2 Lia_Loan2 Payment 2000
124 App1_Fina_1 Lia_Loan1 AmmountBorrow 3000
124 App1_Fina_2 Lia_Loan3 AmmountPaid 1500
here my each application may have differnet question names and they are aplication based. can I have the extract as below
appllication_id | Type | Payment | AmmountBorrow | AmmountPaid
123 PersonalLoan 2000
124 3000 1500
can I have this kind of extract in select statement?

Hi !
I was typing this .. so i'm posting it ..
SQL>
SQL> with tab as (
2 select 123 application_id, 'App1_Fina_1' Page_name, 'Lia_Loan1' Group_name, 'Type' Question_nam
e,
3   'PersonalLoan' Data from dual union all
4 select 123, 'App1_Fina_2', 'Lia_Loan2', 'Payment', '2000' from dual union all
5 select 124, 'App1_Fina_1', 'Lia_Loan1', 'AmmountBorrow', '3000' from dual union all
6 select 124, 'App1_Fina_2', 'Lia_Loan3', 'AmmountPaid', '1500' from dual )
7 select application_id,
8         max(decode(question_name,'Type',data)) Type,
9         max(decode(question_name,'Payment',data)) Payment,
10         max(decode(question_name,'AmmountBorrow',data)) AmountBorrow,
11         max(decode(question_name,'AmmountPaid',data)) AmountPaid
12    from tab
13   group by application_id
14 /
APPLICATION_ID TYPE         PAYMENT      AMOUNTBORROW AMOUNTPAID
           123 PersonalLoan 2000
           124                           3000         1500
SQL> T

Since I have installed iOS 6.1.3 on my iPhone 5 I have sometimes problems to start a phone call. Everything looks fine, but no ring tone... A workaround is to stop phone app in the multitasking bar. But this is more than inconvenient ;-) Any solution?

In this cases everything looks fine, but no ring tone is there and after sometimes the phone informs me that no connection can be estabilished (its a German phone, therefore I am not sure about the message in English systems). A workaround is to stop the telephone app in the multitasking bar (double click on home button, hold the app symbol pressed for some seconds, close app). Next several call work after this.
I am not sure if an incomming call would work in this mode...
Faces anybody the same problems or has solution for it?

Basic troubleshooting
Restart
Reset
Restore with backup
restore as new if required

I'm trying to send (email) photos from iPhoto. Computer says it doesn't recognize my user name or password. I've never had a problem emailing photos.....until now. Any suggestions? I'm sure it's simple but I don't know it!

I'm trying to send (email) photos from iPhoto. Computer says it doesn't recognize my user name or password. I've never had a problem emailing photos.....until now. Any suggestions? I'm sure it's simple but I don't know it!
CAN ANYONE HELP?? I ALSO NEED TO KNOW WHICH/WHAT TO PICK FOR MY MAIL CLIENT. I'VE TRIED THREE DIFFERENT THINGS AND NONE OF THEM WORK!

Mail would be a good choice, unless you are using another email client, like Outlook. There is likely something wrong with the account setup in iPhoto. You may need to delete the account you set up and enter it again if you want to send with iPhoto instead of with Mail.
Give this a try to see what might be wrong: Drag a photo from iPhoto onto the Mail icon in the Dock. It will create a new message with the photo attached. If you click on the photo in Mail, it should show a popup menu to allow you to set the image size to send.
Check out some of the links in the More Like This section to the right. There might be some other suggestions.

I successfully downloaded Lightroom CC. everything looks good, but it will not open. The circle spins about 2 times and then it just stops and I get nothing. I uninstalled and restarted my computer. I downloaded again. Same problem

I successfully downloaded Lightroom CC. everything looks good, but it will not open. The circle spins about 2 times and then it just stops and I get nothing. I uninstalled and restarted my computer. I downloaded again. Same problem

Have you tried logging out of your CC desktop app, then logging back in again? Quit/Restart won't work, but logging out and back in should. See here: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

Why is "erase junk mail" de-highlighted in the drop down menus. I'm not able to delete my junk mail box without doing each one individually. Simple, but please someone help with an answer. Thanks.

why is "erase junk mail" de-highlighted in the drop down menus. I'm not able to delete my junk mail box without doing each one individually. Simple, but please someone help with an answer. Thanks.

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

It might be simple but...

Hello Illustrator group:
I just began learning the program, after years of working on PS, ID, AF, PrePro, etc. and have been working on a project that requires Illustrator. It should be simple, but for the life of me, I can't figure out a way to do it.
I already put a graphic together in PS CS4 but it prints a little blurry, the reason I want to do it in Illustrator.
Any suggestions, or observations will be greatly appreciated.
Many thanks in advance
Peter
The logo is a musical clef interwined with the letter C.

The file looks very good, but I keep having the same display problem with Acrobat. I know the whole file is there by the thumbnail. Also, if I export it to jpg or tiff the file looks fine.
Now, this is something that never happened when I used the graphic from PS CS4 as the logo. I started having problems when I placed the AI CS4 file in ID CS4, then export to Acrobat.
The problem with the faint lines disappeared once I traced the original clef from the PS file in AI. Before I used the clef glyph and increased its size to specs.
One last item is that I'm noticing that the black background is not as rich as I would like. Is there a way to improve this? I included a link so you can download and view the test file. Let me know if you see the black background.
Thank you one and all.
http://www.diplo.org/test.pdf
Peter
PS: I output a pdf file by "printing" to the pdf printer, instead of exporting and I see the file fine. Does this mean that it is the "exporting" parameters that are giving me trouble?

I cannot find a photo I did a lot of work to create. I have several library files that look similar but I found that at least one photo is not in both. Can I somehow merge these libraries. Can someone tell me how.

I cannot find a photo I did a lot of work to create. I have several libraries that look similar but I found at least one photo that was in one and not the others. Can someone tell me if I can merge these libraries, and how, and what to watch for that might cause problems.

the paid version of iPhoto library manager can merge libraries safely
Why do you have several libraries? Why are you not just using the one that has what you want?
LN

Simple but reliable small office setup

Hi group,
I need some advice on setting up a simple but reliable small office wireless network. Up until now, we had a consumer AP combined with wired connections. However, we're moving to a new office where it's difficult to implement a wired network and we decided to implement a good quality wireless network.
So, I was looking into business quality wireless AP's and it looks as if the Aironet 1600 is an interesting option. However, I'm not a (wireless) network specialist and have no knowledge of controlled AP's.
The office is (only) 278 square meters (24 x 11.6), divided in two main areas by a supporting wall with two large doorways. I would like to keep the setup costs to a minimum, ideally using only 1 AP. This might mean placing the AP on the ceiling near the dividing wall (which is roughly in the middle), or on the wall itself.
We need to support fast wireless connections from 15 laptop computers now, and up to 25 in the near future. Also, we'd like to support 15-25 mobile devices, i.e. tablets or smart phones.
I've found some info on the differences between the AIR-CAP1602 and AIR-SAP1602 models, as well as the Internal and External antenna versions. It seems to me we could use the Standalone (SAP1602) model. However, I don't have enough knowledge to determine if the Aironet 1600 is actually appropriate for our requirements and if yes, which model.
I would very much appreciate your advice!

A 1600 would work or even a 2600. I prefer the 2600/3600 though but cost is your concern. I would also place the AP on the ceiling but belies the ceiling maybe in the middle if possible. Don't place the AP above the ceiling because you will loose coverage. Internal antennas are fine and just to note, rule of thumb is 25 users per AP so just in case you need more throughput, maybe using two separated by 3-5 meters would help also. If the 1600's are the choice for you then look at having one or two APs.
Sent from Cisco Technical Support iPhone App

How do I save to mixdown in mono, 0 db reduction in volume, in 64 bps mp3? Sounds simple, but none of the support staff has been able to do it.

How do I save to mixdown in mono, 0 db reduction in volume, (Same volume level as in the files-no -3db reduction) in 64 bps mp3? Sounds simple, but none of the support staff has been able to do it.

Several solutions to this problem. I believe we may have discussed this over the support e-mail, but I'll share it again here so that it can help others as well.
First, as I discussed in the e-mail, Audition defaults to support Pan Law which prevents content mixed to the center of a Stereo field from being louder than the same content panned far left or right. This provides a -3dB drop to center content by default, but you can disable this completely by entering Preferences > Multitrack and setting the Default Panning Mode to Left/Right Cut (Logarithmic)
Now, when you create a new Multitrack session, there is an option to specify the Master channelization. Here, you can select Mono, Stereo, or 5.1 and this will be the default channelization mode for a basic mixdown operation regardless of your clip content, though can be overridden when exporting a session mixdown.
Next, if you just choose the menu item Multitrack > Mixdown Session to New File... it will always default to the Master channelization. This command does not write to disk, it is a preview or pre-processing step. If you wish to export your multitrack session mixdown directly to disk, in your desired channelization and file format, please use the command File > Export > Multitrack Mixdown > Entire Session... You will then have the complete set of output options, including the option to output at any channelization you like and the format you prefer.
Here, I've disabled the default 5.1 output and selected a Mono mixdown instead.
I've now changed the file format settings as well to MP3, 64K.
With most of these configuration details, you should only need to set them once and these will remain the defaults for any subsequent projects, unless modified again. The Export Multitrack Mixdown dialog will reset the Mixdown options to match the default output, and the MP3 settings may update to reflect the kBps setting nearest your session sample rate.

My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphon

My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphone without loss my date?
Thanks

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

FB03 problem, looks simple but tricky

Similar Messages

Maybe you are looking for