FB50 screen layout

Hi All,
While posting the transaction in FB50 we select Debit or Credit in line item. Now my requirement is to change the D/C column to Posting keys. I want to display posting keys in place of D/C.
Any inputs will be rewarded.
Thanks
~Rajesh

Hi,
This is a standard layout given by SAP which you can not change. The posting key for this you define in customization OBX1 and therfore here you have to give only d/c indicator . The posting key is picked up from the customization automatically.
Warm Regards

Similar Messages

FB50 screen layout to include posting key in line item

hi,
could anybody please guide me : how to include posting key in FB50 screen Layout ,
basically the line item details another field : Psting Key needs to be implemented . Aldready tehre are about > 10 fields like
Document , GL Account , Short text , PurchaseOrder etc . But no where posting key is mentioned .
how do we change the FB50 screen layout <at configuration level ? >
Thanks
Trina

well it is a feasibility testing : a requirement from client : required to check if there are any possible ways in which that field can be included .
D/C is heplful bt at certain instance tehre are some erros while posting in transaction stating : "posting key incorrect"
so inorder to check posting key while performing GL Account postings such a req as coem up
Thnaks
Trina

Add field to FB50 screen layout

I'm trying to add country code to transaction FB50 at the line item level. I click on the 'configuration' button (blue/yellow grid button), click on administrator and set field acgl_item-grirg as NOT invisible. I then activate and save, but the column doesn't show up. When I go back into the configuration button, the field is checked again to be invisible. How can I make this field not be invisible? Thanks for any help....

Hi,
1. Go to FB50
2. Enter Values befor simulating
3. Click the Configuration button(Green/Yellow & White Button)
4. Create a Varient
5 .Click the Administration button
6. check the Button ACGL_ITEM-GRIRG Deselect the Invisible Check box.
7. Click the Activate System Wide (F5)
8. Click the Close button.
9. Save the Settings
Revert back if any clrifications
If any authorization missing check the Transaction code SU53 and ask to Basis to get the missing authorization.
Regards,
Kishore K

User Specific Screen Layout in FB50

Dear Friends,
We are trying to change the sequence of fields in FB50 for a specific user.
Earlier there was an option in to change the screen layout, it was a variant sign on the right hand top side of screen but It is not there in the FB50 screen.
SHD0 does this setting for all the user ?
Is there any way to achieve this for a specific user .
Thanks,
Sapan

Hi Sapan
Mostly it was auth object S_ADMI_FCD with Actiity TCTR for Administrator Function for Table Control Settings
This should resolve hopefully, share the feedback and close the thread incase it does
Br. Ajay M

Screen Layout with MIRO, FB50, FB60, FB65, FB70, FB75 ETC.

Hi,
Can anybody let me know how the screen layout of TCode= MIRO, FB50, FB60, FB70, FB65, FB75 etc. is changed?
I want to add the column "COMMITMENT ITEM" during posting with the above Transaction Code.
Please help.
Regards
Rahkes

Hi Amanullah,
Thanks for your response.
For Commitment Item - I have created one DUMMY Commitment Item with Financial Transaction = 50 (Clearing). (TCode-FMCIA)
I like to assign this DUMMY Commitment Item where I don't require the Fund Management Activities like Budget. I am doing this b'cos commitment item is mandagory in Fund Management.
I have assigned Commitment Item = DUMMY to all remaining GL Account in FS00.
When I am posting transaction with FB01 then it has no problem b'cos the field Commitment Item is visible and optional and "DUMMY" is automatically assign to the commitment item. But in case of FB50, FB60, FB70, MIRO etc where the Commitment Item field is not visible I am getting the error "No Commitment Item entered".
To avoid this error, to me there are two options
1. I can assign the "DUMMY" commitment item to each GL Account under FMDERIVE
2. To assign to "DUMMY" commitment item to each GL Account in FS00 and make the commitment item visible and optional in all T-Code like FB50, FB60, FB70, MIRO etc. But in this case I am not able to make the commitment item visible and optional during posting of the transactions.
Could you please help with your expereise?
Which option is more logical in this case?
Regards
Rahkes

How do I get a Up One Level in the Topics page of my screen layout?

I am trying to insert an "Up One Screen" on my Topic page in my screen layouts and it's only allowing me to add a hyperlink to the Table of Contents. Any suggestions?

What do you mean by Up One Screen? Where is Rh only allowing you to add a hyperlink to the TOC?
What sort of help are you generating?
What version of Rh are you using?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Error of Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment

HI
My previous asset error was cleared by assigning non-tax While using the option of Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment the following error is coming ..... Steps are attached (File and URL)
http://rapidshare.com/files/135200425/asset_error.doc.html
pls help me ....
Thanks & Regards,
Kalai

Hi,
There are 2 set-up parts:
General setting that is working for all depreciation area's
Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
When you have only 1 area it don't have sense to create Chart-of-Dep.-Dependent Screen Layout/Acct Assignment.
For me 20 Chart-of-Dep are using the standard one and for 1 is using his own Chart-of-Dep.-Dependent Screen Layout/Acct Assignment
This is the reason for the errors

Error While defining screen layout in asset account

Hi Guru's,
I tried to define screen layout rules in asset accounting but it showing error "screen layout control"410"does not exist.can any body tell me whats wrong?
Thanks

Refer SAP note 1035757 or 489268

PO Screen Layout - Goods Receipt Indicator

Hi Guru,
I need help in opening up the Goods Receipt indicator in PO for editing. Can someone guide me on which field in the GR/IR control selection group should I be changing in customizing in order to open up this field?
If there are other configuration involved, please let me know too. Thanks.
Regards,
new@SAP

Hi
the field GR in the PO item is controlled by the usage of material being used, Account assignment category.
In case of material which is Quantified & Valuated in the Plant, you cannot remove the GR & IR flag.
In case of account assigned PO's this indicator is changeable.
Using screen layouts you cannot control them.
Thanks & Regards
Kishore

Screen Layout Field in the Asset Master Record

What is the use of the screen in the asset master record, ANLA-FELEI?
We have some assets where there are different values between this screen layout and the screen layout defined at the asset class (i.e. through configuration).
It seems the one defined within the asset class takes precedence.

HI
Scree Layout controls the diplay of fields, it may not be necessary for a user to use all the fileds provided by SAP. Hence the options like Required, Optional and Suppress are used to control the screen diplay and the TABs to be displayed based on the need.
Asses within the same class will have same fields since the screen layout are assigned to an Asset class.
Scree layout for the Tab Depreciation Area can also be controlled with the screen layout defied for the Depreciation Area. With this one can have different screen layouts per dep. area.
Hope i'm clear to you.
Thanks,
Vijay

Group Asset Screen Layout disabled fields

Hi All,
We have created asset masters with Book and Tax depreciation, For tax depreciation we are assigning Group asset. Issue is while doing take over value with t- Code AS92, system should propose the field of APC Value and Accumulated Depreciation Value but both the fields are proposing only for Book Depreciation
In case of tax depreciation APC value is editable and Accumulated Dep value is disabled, requirement is we need to enter both the values for tax dep along with group asset assignment.
This is happening only when we are assigning group asset while creation of asset master. if you donu2019t assign group asset to the asset master then system is allowing us to enter both values in both the depreciation area.
I have checked necessary configuration regarding screen layout and not found any solution.
Kindly help in this regard.
Regards,
Sahil K

Hi:
Please check for missing authorization if any in Transaction code ANSICHT. Have you checked group layout in AOLA..
Regards

How to make use of the 'Groups' in Screen Layout?

Hi All,
I have a screen with 10 input fields (F1, F2, .. F10).
I set the 'Groups' attribute in the screen layout to 'DIS'.
How could I make use of this 'Groups' attribute so that when I loop the screen, I will only disable fields with the 'Groups' attribute set to 'DIS'? Thanks
I tried the following codes, but it's not working:
LOOP AT SCREEN.
    IF SCREEN-GROUPS IS NOT 'DIS'.
      SCREEN-INPUT = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
It says ==> The data object 'SCREEN' does not have a component called 'GROUPS'.

In the Attributes of a screen field, there is an attribute called "Groups". This has 4 options for input (4 text boxes)
SCREEN has 4 fields GROUP1, GROUP2, GROUP3 and GROUP4.
The first text box under Groups attribute corresponds to SCREEN-GROUP1,
2nd text box for SCREEN-GROUP2
3rd text box for SCREEN-GROUP3
4th text box for SCREEN-GROUP4
Hope this helps.
Thanks,
Balaji

Screen layout for Special G/L indicator

Hi everyone!
I would like to know if you create a new special g/l indicator, you can change the screen layout that the system gives you. I need to create some which can have a screen layout similar to the one used in 01 key account.
Thanks in advanced,
Olga

Hi Santosh,
I´m going to give you some examples about what I want to do. First, I would like to used the special G/L indicator H security deposit which is configurated like as others special G/L transaction types. When I post with this Special G/L indicator the system shows me some fields in the accounting screen layout such as "Due on", "Invoice reference", "Assignment", etc. I would like to change this screen layout because I need fields like "Payment terms", "Payment block indicator", etc. What I did was to change field group status of the reconcilation account that this special G/L indicator has, and key accounting configuration that this special G/L indicator uses. It doesn't work because I make these fields optional and the system didn´t show me those.
Other I need to do It's make new special G/L indicators because I need to post with a different reconciliation account and I need to configurated the screen layout with fields such us Payment terms, Payment blick indicator, etc. I mean I need to create my own screen layout.
I don´t know if this gives you more details about what I want to do.
Thanks so much.
Best regards, Olga

Change in Screen Layout of PO for a particular Item category

Hi,
We are facing a typical issue after Upgrade of our system from 4.6C to ECC 6.0.
Whenever we try to create a PO (in the newly upgraded system) with the Item category S (Third Party PO), the material number field goes blank and it becomes Non-Editable (even before saving the PO)...
However, on saving, EKPO table has the entries for the material number specified before entering the Item Category S. If we try to display the PO, it shows blank in the MATNR field.
This works fine with other item categories......we see this problem only with the item category S.
All the configurations (Screen Layout for Document Type, External Representation of Item category) are fine....but still we are facing this problem....
Any suggestions on this?
Thanks and Regards,
Gaurishankar

Hi Ninad,
I think I have mentioned it very clearly that it works for other item categories assigned to the same document type. It is a very basic setting that one has to check for issues related to PO screen layouts and I have done all those checks.
As stated earlier, this issue has come up after Upgrade, so just want to know if there is any known SAP Note or solution to this problem (if someone has faced it earlier).
However, thanks for your reply...
Regards,
Gaurishankar

Need help with Responsive HTML5 screen layout in RoboHelp HTML 11

I have a few questions/issues regarding screen layouts for Responsive HTML5 output in RoboHelp HTML 11.
First off, I decided to just use the Theme1_Standard layout that came with the program (only other default option was Theme2_Government) and started customizing the layout. I originally added a company logo to the 'Header' component in the Customization dialog, but have since decided to remove it. I can't seem to do this from the dialog, so I tried just deleting the image file from the whole project. The file is gone, but the logo is still there. This is only displayed in the header when a topic is displayed, it does not appear in the header at the TOC, Index, Search screen, etc. How do I get rid of this???
Secondly, the text in the header for the topic screens appears differently than the one on the screens for the TOC, Index, Search, etc. In the former of these, the header is displayed in maroon text in a much smaller font, similar to that used in the topics. In the latter, the topic is displayed based on what I configured in the Layout Customization dialog; much larger in white text on a black background. In each case the heading text serves as a link to the default display topic shown when the help file is launched, which is fine. However, how do I get the header to be consistent across all screens (topics and TOC, Index, etc. alike)???
As a result of these issues with the Theme1_Standard layout, I'm trying to import a different Responsive HTML5 screen layout than the two provided within RoboHelp HTML 11 (Standard and Government). I did some digging in the program help and found another layout I'd like to use (Theme3_Black.zip) at RoboHelp screen profiles and layouts. I tried importing the new layout, but it's looking for a .SLZ file and the only one in the files that came with the ZIP file is SLZConfig.xml, and I don't think that's what I need, though quite honestly, I don't know.
I extracted the contents of the ZIP folder to a folder in the !ScreenLayout! folder within the RoboHelp project, but when I open the project, I don't see Theme3_Black as an option. I need to figure out how to import this screen layout because the color scheme matches the one used in the program for which I am writing the help. How do I import and apply this other screen layout???
Any tips, tricks, or guidance on any or all of these items would be GREATLY appreciated.
Thanks much in advance,
Dave

Item two of the original post is also something I am having issues with:
"Secondly, the text in the header for the topic screens appears differently than the one on the screens for the TOC, Index, Search, etc. In the former of these, the header is displayed in maroon text in a much smaller font, similar to that used in the topics. In the latter, the topic is displayed based on what I configured in the Layout Customization dialog; much larger in white text on a black background. In each case the heading text serves as a link to the default display topic shown when the help file is launched, which is fine. However, how do I get the header to be consistent across all screens (topics and TOC, Index, etc. alike)???"
We have the text toggle between red, white and blue depending upon the topic selected. In the customize Selected Layout we have the title color set to white. It seems to think that it is a link and I would like to know how I can force the text to be white and to stay that way no matter which topic is selected.

FB50 screen layout

Similar Messages

Maybe you are looking for