Fce 3.5.1 and upgrade to 10.4.11
hello there,
i have currently os x 10.4.6 and i am planning to upgrade to 10.4.11
will this effect fce 3.5.1 , does/did anybody experience some problems with this upgrade.
i am just wondering if i can upgrade without causing fce3.5.1 to stop working
please let me know
best regards eric
OS 10.4.11 and FCE 3.5.1 is exactly my setup on MBPro. I don't recall the exact steps of my OS updates, but don't think you'll have any problems. Of course, making a bootable backup of your present disk would be wise.
Similar Messages
-
I just purchased FCP studio and want to uninstall FCE 1.0.1 and FCEHD off of my computer so I can install FCP. Am I ok to uninstall those previous versions of Express even though I am working on projects that are using those versions? Am I able to upgrade those projects to Pro once I get that installed?
Thanks for you help,
JoeUse these to uninstal - the one for FCE2 is OK for FCE 1.0.1:-
http://docs.info.apple.com/article.html?artnum=93688
http://docs.info.apple.com/article.html?artnum=301182
I think you should be able to use an FCE project in FCP but it might be wiser to finish it off first in FCE.
(Incidentally I think you can have FCE and FCP safely residing on the same computer).
Ian. -
I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????
Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X. -
My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?
OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013 -
I have just bought a new computer and downloaded itunes. I plugged in my iphone and upgraded to the newest itunes/ synched etc. Now have no music or apps on the phone. Contacts, texts, photos all fine. Just all itunes content that is missiing. It isn't showing in my itunes account on my computer or on my phone. Any idea how to get it back? (No point synching with itunes on my computer as it isn't there either!)
I suggest copying your entire iTunes library to your new computer, also you might want to copy the photos you want to save. Then sync your device to the new iTunes and copy over your music, documents and photos that you want.
If you are no longer going to use the old computer you should open up iTunes on the old computer and use the menu to deauthorize it. Be sure to use the same iTunes menu on your new computer to Authorize the new one. -
Actual problem:
I reinstalled all my programs that I need without a hitch. Meanwhile, I've been trying to recover the few files (mostly music) I actually store on my computer's hard drive as opposed to on my external HDs. I use one external HD for my graphic files and the other is strictly for Time Machine backups. I tried to recover my iTunes music, but I got a message that says: "The file: "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." I restored (I thought) my iTunes library Username/Music/iTunes." Additionally, I was going to upgrade to Mountain Lion, but I have seen that there were issues with Lion and iTunes libraries so I'm a little wary of this.
Excuse the long explanation, but I figure the problem may possibly be in the details of the weeks prior this problem:
I have recently been having issues with my iMac. I brought it in to see a Genius twice within the past month and they couldn't seem to find the problem. (It would restart Finder of it's own accord while I was using Adobe CS programs) I figured it was worth backing everything up via Time Machine and doing a complete erase/install/factory reset. I did so and had a problem again, and brought it in again, third time. The Genius did another diagnostics tests and found nothing and said my erase/install probably did the trick, but time will tell. I am, after the erase/rewrite and upgrade running Mac OS X 10.6.3 and previous to this was still running Tiger.So, I didn't update iTunes and the rest of it after installing Snow Leopard. My stupidity, I figured that the OS was more up to date than the one I had previously so that all the programs that come with it probably were more current than the ones I was using. However, now that I have updated all my software, I am still getting the same message from iTunes that I was previously. I cannot open iTunes at all, same "The file: "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." message. I'm confused again. Checked a few other threads and whatnot and cannot seem to figure this out.
-
How to open and upgrade Keynote 08 presentations
Hello,
The new keynote can not open presentations saved with keynote 08. It asks for the presentation to be first opened in keynote 09.
The thing is, I don't have Keynote 09, and only the newest version is available from the app store.
So I can I open and upgrade my keynote 08 presentations ?
ThanksMPSeevinck wrote:
Hello,
The new keynote can not open presentations saved with keynote 08. It asks for the presentation to be first opened in keynote 09.
The thing is, I don't have Keynote 09, and only the newest version is available from the app store.
So I can I open and upgrade my keynote 08 presentations ?
Thanks
The latest version of Keynote, 6.5 running in Yosemite can open all previous versions of Keynote. -
I am having trouble opening .mov videos with Quicktime on my PC with Vista. I installed the latest version of Quicktime for Windows (V.7.7), and upgraded it to Pro. It will open a .mov file once, then after that it will not open any .mov file and in fact, when I try to open the Quicktime player it will not open itself. If I switch users to Admin, it all works fine, but when I go back to my regular role (where all of my preferences and programs are there for me to use), the same thing happens. An .mov file will open once, then never again, and the Quicktime player seems to be disabled.
I've tried different .mov files, so it's not a corrupt file that's the problem. And, in the past (a couple of Quicktime versions ago, I guess), all of this worked just fine.
Any helpful suggestions would be appreciated!I have the exact same problem. They play on my Mac under Snow Leopard. Transfer to Vista gets a window with black and white and some other noise. No sound either.
-
BO XI 3.1 installation and Upgrade activity Steps
Hi Experts,
Right now we are using BO XI R2 Version, Planning to uninstall XI R2 and do a fresh installation of BO XI 3.1 with SP3.
Do I need to install the Java latest version for XI 3.1? Right now we have the following setting,
j2re1.4.2_04
j2re1.4.2_16
jre1.5.0_14
Since the up gradation of Reports, user, groups, universe events etc are from XI R2 version to XI 3.1.So Is it enough to
install BO XI 3.1 with SP 3, or do I have to go for FixPack inorder to avoid problem after this upgrade activity.
Could you please tell me about the BOXI R2 to XI 3.1 installation and Upgrade activity Steps.
Regards,
SridharanHi,
you dont need a special JRE version on the Server. With the installation of BO a own JRE will be installed for BOE. Only for developing WebI reports the developer need a 1.6.x JRE later on.
There is already FixPack 3.1 out but installing "only" SP3 should be sufficient.
I would recommend you check the upgrade guide from Rel.2 to XI 3.1:
https://websmp208.sap-ag.de/~sapidb/011000358700001646952008E/xi3-1_bip_upgrade_en.pdf
You need a S-User to Login.
Regards
-Seb. -
when i try and upgrade the OS on my new macbook with retina i get an error message that it is not compatable
Hello, i have the same problem i have my brand new MacBook Pro retina display with mountain lion, but i can´t upgrade any app or installing from App Store, because all that app are compatible with 10.8.2 and not with 10.8.1 i ´ve been downloaded the upgrade from this link http://support.apple.com/kb/DL1581?viewlocale=es_ES, and i try to install it and they said that my Hard Disk is not compatible with this software. ***!!!! is the last new machine and i can´t upgrade!!!! please i need a solution, or a link whatever. i tried to re-install the mountain lion and is the same problem, today at the afternoon i will try with my time machine hard drive to see what happened beacuse in my ex macbook air 2012 i have the last O.S.
-
I have ios7.1.2 on my iphone and am trying to upgrade to 8.0.2. I haven't installed 8 yet and when I try and upgrade nothing happens. It says ios8.0.2 improvements from 8.0.1 are available but not the whole ios. What to do?
It sounds like maybe 8.0.1 has downloaded onto your phone but not installed. You can check for it in Settings > General > Usage > Storage, Manage Storage. If it's there you should see it at the top of the list of apps. Swipe to delete it. 8.0.1 was pulled by Apple quickly after it was introduced due to issues and replaced by 8.0.2. Once it's deleted you should be able to download and install 8.0.2.
-
I bought an Ipad 4 for my wife and iPad Air 2 for my daughter and I have just bought a Macbook Pro with retina display for me. The whole family is an Apple products fan due to its reliability and security. Never know that it could be a disadvantage also. I bought a second hand iPhone 4s from a friend as he is short in caash, and I've been using it for awhile. I "restore and upgrade it" without thinking or checking the Find my iPhone settings, unfortuately it is turned ON. Although the previous owner removed the phone lock, I never asked for his icloud account as I intend to use the phone only for calling. I cannot contact him as his contacts and email address were erased when I restore the iPhone.
I have learned a hard lesson since Apple security is impregnable, my iPhone 4S will just be an expensive paper weight.no.
without the previous owners credentials the phone is useless to you. -
Can't renew contract and upgrade phones 1 1/2 days early?
Last Saturday I tried to renew my contract and upgrade mine and my wife's phones to the Galaxy S5 at the Tunnel Rd, Asheville NC location. My official contract renewal date for both phones was the following Monday, but due to the nature of my work, and the fact that I have to schedule said work around my wife's cancer treatments, I rarely am able to make it to any business within business hours. I had hoped that renewing 1 1/2 days early would be feasible, but upon asking at the Verizon store, I was told by the young lady "assisting" me that, no, they were very strict on not allowing early renewal, and that I should come back Monday. So now it seems that i have missed the buy one get one free deal? That would be very aggravating in and of itself, but imagine my surprise when a friend said no, that you could renew and upgrade 30 days before the official date, and he called customer service in my presence and proved it. So was I pushed out of the store because they were busy, or were they just hoping that I would come back on Monday and pay the normal price for both phones? Is there any way that I can still get the bogo deal? Extremely unhappy with Verizon at the moment, I wish there were more options in the rural are in which I live.
The store service is no good for any situation even MILDLY complicated. We upgraded my husband's phone 3 days early because he was deployed and coming home three days prior to his renewal date and his previous phone no longer worked. He did it over the phone but the order mistakenly got cancelled. Went into a store to try to get it handled and they will literally tell you "We work on a different system that the customer service center." I don't even know what that means, but basically, unless you are starting new service, paying a bill, or buying accessories, they will be of no help. I went home, called back into customer service and got it situated. Had you called in, I am almost certain they would have upgraded you. Unfortunately, as someone has already stated, if the deal is over, they most likely will no longer honor it.
-
iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
I am looking at buying a MacBook Air over the Pro mainly for the 12 hour battery. Just wondering if battery is compromised by upgrading to 8mb and upgrading to I7 Intel dual core. I am not very tech savvy so apologies if dumb question
If both computers were configured identically, then they would both lose the same amount of battery life with respect to the same starting configuration - comparing apple to apples. I don't know how much the added RAM, etc. would reduce battery life, but it would be less for both models.
Battery life is a tricky subject because most mfgr.s like to suggest as long a life as possible, but often do so under a set of conditions that are not common to most users. Apple is no different. Their computers do have good battery life, however. But not likely as long as what is in the ads for the typical user.
Maybe you are looking for
-
Deploy MS SQL Driver in PI 7.4 Java Only
Hi Experts, We have a requirement to use JDBC adapter to connect to MS SQL Server. For that jdbc driver should be deployed on PI. For that i have downloaded .jar from MSDN - sqljdbc_4.1.5605.100_enu.exe I have gone through several threads & SAP note
-
MouseEvent.LocalX co-ordinates doesn't resize with sprite
I'm looking into how to create a custom sprite which the mouse performs different actions depending which part of the sprite it is clicked on they are: 1) Click and drag on the left edge able extends the box to the left 2) Click and drag in the middl
-
Where can I find the instructional manuel for Power shot A1100 camera.
Where can I find the instructional manuel for Power shot A1100 camera.
-
Qty not copied in service entery sheet
Hi experts, I have created a service PO and no service entry has been created on that so far. the problem is that system doesnt copy the qty while selecting the PO in service selection and system says "Please enter quanity" and obviously doesnt allow
-
Wireless setup wizard on hp 7410 all in one doesn't give promt for next step in setting up wireless
The printer is connected to a computer (windows xp) through usb I want to enable the wirless for my laptop (windows 7). I ran the wireless setup wizard and it says searching for available networks then goes back to the home screen. I ran the network