FCPX 10.0.3 "instant edit" problem with OLD MBP and iMac

The setting
~15Gb of footage from 5D Mark 2 (with half the bitrate through Magic Lantern)
~Short editing project.
The problem
In the beginning, I used my early 08 MBP
I tried importing the footage from CF to an event on my USB drive (I don't have a FW800 drive atm)
Selected "create proxy media"
Instantly all clip show up, however,
all clips in event has the red document and ! sign, cannot preview.
the "background activity window" shows that it is converting.
I have to wait until the first clip finish processing, then the red document with ! sign icon will be gone,
I can preview, and start editing
Then, I tried running FCPX on an 2007 iMac
using the same import setting, I again import the footage from CF to USB drive
again selected "create proxy media"
INSTANTLY all clip show up WITH PREVIEW and I can just start editing right away,
and I can see that the maching is doing background proxy conversion to ProRes 422
Then, after iMac has finish creating the proxy media for the first clip (there are about 14), I stopped the background processing, and confirmed that all previewing, editing function are still intact, i can see every clip and the waveform and everything. Since both the event and the project is on the USB drive, I ejected it and put it back on my macbook pro. FCPX on my macbook pro can see the event, the project, so I load them up. However, all the clip that has no proxy media show up again with the red document ! icon, and i cannot preview any of those. The file which has proxy media created is behaving just fine.
The machines
MacBook Pro 15" Early 08 (last version before unibody)
2.4Ghz Core2Duo
6Gb Ram
200Gb 5400 HDD
Nvidia 6800M GT 256Mb
OSX Lion (latest one i forgot the number after 10.7)
iMac 7,1 (sometime in 2007 I believe)
2.4Ghz Core2Duo
4Gb Ram
500Gb 7200 HDD
ATI Radeon HD 2600 256Mb
OSX Snow Leopard 10.6.8
USB 2.0 Drive 200Gb 5400Rpm I believe
Question
Is this a setting problem anyone seen this same problem before
I'm particularly puzzled since apparently the imac is only better than my mbp in terms of having a bigger and faster harddrive....
Please help!!!

There are playback preferences that set playback to either proxy media or original/optimized media. You can only work with and play one type of media at a time. If you have proxy playback switched on you will only see proxy media.

Similar Messages

Problems with "old" AppleID and iCloud

I changed my AppleID from a username to my primary email, but iCloud refused to verify it, or send an additional verification email so I had to change the primary email on that account and create a new account with the email I wanted (the one used on the old account), but now all my iTunes purchases are on the old AppleID. Is there any way to fix this?
Seems weird that I had the option to "transform" my AppleID and then it didn't work even though the email had already been verified.
I really don't want multiple AppleIDs..

I'm having this exact same issue.

Who is having problems with old printers and Mavericks?

I am so frustrated!!! I cannot print in COLOR with my upgraded system (Mavericks). I have an older HP Printer and it is no longer supported.
I do not want to buy a new printer when it is just fine.
R. Johnson

I am so frustrated!!! I cannot print in COLOR with my upgraded system (Mavericks). I have an older HP Printer and it is no longer supported.
I do not want to buy a new printer when it is just fine.
R. Johnson

Problem with FCP 7 and IMAC

Recently loaded FCP 7 on new Apple IMAC, in fact on several IMACs. Most work fine, but on the one there is a problem.
If you open FCP first time, it opens fine. However, once you close it and try to reopen it, it gets part way then quits, crash's, whatever. To get it to open again you have to go to the users library, preferences, and delete the three preference files in the Final Cut User Data folder. Then FCP opens. Hassle because you need to reset all the defaults.
What gives? Anyone else see this problem?
Mike

You could try Repair Permission in Disk Utility and relaunch FCP.
BTW, here a reason not to double post:
It is confusing and unnecessary
http://discussions.apple.com/thread.jspa?threadID=2756074&tstart=0

Problem with Sky Boradband and iMac

I seem to have a problem which is bugging the life out of me at the moment, my wireless connection keeps timing out on my iMac, i know its my iMac because my xbox 360 is constantly online without a problem.
anyone know what could be the problem?
Thanks Chris

You could try Repair Permission in Disk Utility and relaunch FCP.
BTW, here a reason not to double post:
It is confusing and unnecessary
http://discussions.apple.com/thread.jspa?threadID=2756074&tstart=0

Problem with Nokia Camera and Smart Sequence

Hi,
I'm having a problem with Nokia Camera and the Smart Sequence mode.
Basically, if you take a picture using nokia camera, and view it in your camera roll, it usually says, underneath the pic "open in nokia camera".
Well, if I take a pic using the Smart Sequence mode, it just doesn't say "open in nokia camera" so, to use the functions of smart sequence (best shot, motion focus, etc), I have to open nokia camera, go to settings and tap the "Find photos and videos shot with nokia camera" option.
Does anyone has the same problem? Anybody solved it?
I already tried reinstalling nokia camera, but that didn't help.
I'm running Nokia Black on my 925.
Thanks everyone!

Hi,
I had the same problem with my 1020. It did get fixed with the last update to Nokia camera.
However, IIRC, it didn't just happen right away. When browsing the camera roll I'm pretty sure that the "open with Nokia camera" text wasn't there.
Slightly disappointed I opened the (Nokia) camera anyway and was going to test the smart sequence again. I noticed the only precious pic I'd taken using this actually appeared top left of the screen.
I opened it and I had all the smart sequence editing options again - that we're missing previous. Made a new picture and saved it.
Now when in camera roll the text shows below the image and all is good.
This probably doesn't help much except that it didn't seem to fix automatically.
I work @Nokia so I can ask around a bit to see if this is a known / common issue (not that I know any developers)

I have a problem with indesign cs6 and my epson 3880 on mac

I have a problem with indesign cs6 and my epson 3880 on mac. I need an older version of indesign but do not have a serial number....any suggestions?

I see then I believe Kglad's advice is on track with starting with updating your printer drivers. I have also moved this discussion over to the InDesign forum as the Users in this forum likely have additional suggestions.
Also if you can please turn off your e-mail signature if you want to respond via e-mail. Your responses are going to a public forum where the information is accessible by anyone. I have edited your previous response to remove the signature.

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *********

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *******
<Edited by Host>

Hello Khayalh,
You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

I'm having problems with iPad 2 and my smart cover. The attachment seems to be depolarized and it moves around causing the device to toggle and flash like its coming on or shorting. Anyone having problems?

I'm having problems with iPad 2 and my smart cover. The attachment seems to be depolarized, trys to connect using the back (curved) edge of the magnetized bracket. When I try to attach it, it moves around causing the device to toggle in a way that looks like the camera flash. Anyone having problems? Help.

Update. My carrier says the antenna of my iPhone 4s is not so good as the one in the iPhone 3G. They can't solve the problem. Their signal is too weak for the 4s at places I spend most of my time. Not the answer I expected, but I'm free to choose an other carrier. Hope this will help.
This was not the correct answer, I accidentially clicked the button..
Message was edited by: vasch

Problems with 1.5 and vista - audio recording

Hello. I have PP 1.5. I have an Audio Techinca AT2020USB microphone. I have a couple different computers running 1.5 - The one that has XP as an OS, I can use the mic to record audio. On the computer that runs Vista, I can not. Is anyone aware of any patch or anything that will allow me to make this work?
Please, advise. Thank you.
bobhugejunk

YOU ARE THE MAN!!!! It took a little bit of working the configurations, but I got it to work....oh, me so happy...oh, oh, me so happy
Thank you!
Make sure you visit www.bobhughesmichigan.com for my music samples, schedule and video information!
Date: Wed, 21 Oct 2009 19:34:20 -0600
From: [email protected]
To: [email protected]
Subject: Problems with 1.5 and vista - audio recording
As Jim points out, CS3 was the first Vista-certified version, though many did get PrPro 2.0 to run on it.
Now, if PrPro 1.5 is running otherwise, you might have some luck with http://www.asio4all.com You'll need to download this freeware, install it, and then point PrPro to it in Edit>Preferences>Audio Hardware>Asio Settings for input and output.
Good luck,
Hunt
>

Problem with ws-security and MTOM

Hi all,
I have seriuos problem with WS-Swcurity and MTOM. When I anebled WS-Swcusriy on WSDl, MTOM messagies have all attachments inline, not as a part of message. Here my WSDL definition:
<wsp:Policy wsu:Id="WSMTOMPolicy">
     <wsp:ExactlyOne>
         <wsp:All>
             <wsoma:OptimizedMimeSerialization
                    xmlns:wsoma="http://schemas.xmlsoap.org/ws/2004/09/policy/optimizedmimeserialization" />
         </wsp:All>
     </wsp:ExactlyOne>
       </wsp:Policy>
       <wsp:Policy name="UsernameToken" wsu:Id="WSSecurityPolicy">
      <sp:SupportingTokens>
            <wsp:Policy>
                  <sp:UsernameToken
                        sp:IncludeToken="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/IncludeToken/AlwaysToRecipient">
                        <wsp:Policy>
                             <sp:WssUsernameToken11 />
                        </wsp:Policy>
                  </sp:UsernameToken>
            </wsp:Policy>
      </sp:SupportingTokens>
    </wsp:Policy>
Does anybody advise for me, some solution of this problem?
Martin

@Lovin_JV_941794
The welcome page is public available since it does not have appropriate PageDef file.
Login page comes not from the welcome page, it comes after attempt to access the test page. So after the login succeeded the test page appears, because redirect to welcome page after successful login is not configured. I do not need to return the welcome page at this moment, I need to go to the test page.
It seems the task flow call stack to be destroyed after redirect to login page.
Edited by: user13307311 on Apr 17, 2013 12:45 AM

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with dropped calls and no reception on Samsung Continuum

My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.

If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

FCPX 10.0.3 "instant edit" problem with OLD MBP and iMac

Similar Messages

Maybe you are looking for