FDM validation report issue

Hi,
I am working on validation reports in FDM.
My logic works fine and I see result by all Entities in Validation report.
I need to see result by other dimension in validation report other than Entity dimension in FDM.
Can you let me know how can we achieve this.
Thanks in advance

Hi,
Thanks for the reply, I have placed the dimensions in the rule.. But when I see the report, it is getting displayed for every entity in the file that is processed in FDM.
But I want my report to have data for each Product dimension instead of Entity ie. sum by each product
Thanks in advance

Similar Messages

FDM validation report with source data gives 0

Hi All,
I'm building a validation report to report on the source data (so using ~ instead of |).
I've created a logic group to sum up the amounts to a member TOTAL.
When i use the validation editor lookup screen i can browse for Entity, Account (TOTAL), UD1, UD2 and UD3.
The category, Period and Year are left blank.
When trying to test i have to select a test entity (which is the target entity dimension). However, these entities are nog in my source entities (since they are mapped).
So the lookup value gives a value of 0 while a value should be there (since i've selected all dimensions).
Any suggestions? i remember that in the past i did just select a random test entity and it did work.
We're using version 11.1.1.3.
Thanks!

Hi Tony,
What do you mean by target information.
I only retrieve source information but i have to select an entity in the test window (where only the target entities are shown).
So all fields in the import screen (except those in the pov) are defined and match the import screen members exact.
Furthermore when i click browse for the years i get an error as well..

FDM Validation Issue

Hi All,
When Performing the second step in workflow (Validate) the fish turns gold for success but returns the error message "Automation error" what can be the reason and what is the solution?
Thanks
Satyajeet

Hi,
Check Oracle Support FDM Validate Step Returns "Automation Error" [ID 1301133.1]:
Applies to:
Hyperion Financial Data Quality Management - Version 11.1.2.0.00 and later
Microsoft Windows (32-bit)
Symptoms
When performing the second step of the FDM workflow (validate) the Fish turns gold for success but returns the error message "Automation Error".
Cause
FDM is currently unable to integrate with Hyperion Financial Management successfully to perfrom the intersection validation. The integration failure is due to the HFM Adapter not being configured to run as the FDM Service account. In order to successfully integrate with HFM the FM11x-G5-D adapter must be registered and configured with the FDM Service account. Currently the adapter has not been configured.
Solution
A) Login to the FDM application via the workbench client on the FDM application server
B) Go to File menu and choose Register Adapter
C) Browse out to Adapter folder and register 'fdmFM11XG5D.dll'
D) Expand Target System Adapters > Right-Click on the FM11x-G5-D adapter and choose "Configure"
E) Enter the FDM windows service account username/password/ confirm password/domain and click OK.
References
NOTE:597481.1 - When Running Validate Step in FDM Receive "Automation error"
NOTE:599826.1 - FDM Validation Fails With Error: Automation Error
Cheers,
Mehmet

Intersection Validation Report

Hi everybody
I'm trying to create Intersection Validation Report, but an error occurs (the usual XML/XSL issue seen in other threads).
I think in my case this error is due to MS Office absence (because on another server with the same HFM and FDM applications and Office installation it works perfectly).
My question: is it possible to generate Intersection Validation report without Excel? Through other templates for example...?
Thanks in advance
Francesco

Which version of FDM are you using. In the current versions inersedtion validation reports are not created with Excel but in XML. In earlier versions this was an option in the integration settings so you could specify to use XML Intersection validation reports instead of those generated using the Excel engine.

FDM Validation error.

Hello,
we are getting the following error when we are trying to validate. We are on v4.0.30319 .Net framework on IE8.07. Working on 11.1.2.1 FDM version.
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Access is denied.
Please let me know a solution for this issue.

Hello there,
That's a common issue I think which is related with the configuration of the Web server… In the Workbench, right click on the adapter name and select Options. Find the setting ' FDM Web Server'. The value here should be the web server name as displayed in the FDM URL.
For more details regarding this issue check the article FDM: Unable To Open Intersection Validation Report- Error: "Cannot view XML input using XSL style sheet" (Doc ID 1346956.1)
Regards,
Thanos
< spam signature link removed by moderator >

BPC 7.0MS Validation Report isn't displayed

Hello colleage,
This question is related to the following thread.
[BPC - Submitted data did not pass validation|Re: BPC - Submitted data did not pass validation;
<Procedure>
-eSubmit > Validate submission
-The message is displayed:
"Submitted data did not pass validation; you may need to resubmit it.
A Validation report cannot be generated because there is no Validation report template."
I think that Validation report can be opened on this timing.
Are there missing settings?
If you have any information or ideas, could you please help me?
<Setting>
Application Parameter
LOCKREPORT: Validate.xlt
Validation Report
eExcel\Input Schedules\Wizard\Validate.xlt
Thank you in advance.
Best regards,
Kei Ogino
Edited by: Kei Ogino on Jun 24, 2009 11:00 AM

Hi Ki Ogino,
We have tested the behaviour for the same scenario.
You get this error, if the template is opened from the /INPUT SCHEDULE/WIZARD or the template not accessible from the relevant location.
Otherwise, able to succesfully validate the data submission by both ways:
1. eSubmit :: Validate Submission
2. Send Data :: Validate Submission before sending.
The issue noticed is that data not refreshed / displayed in the input template after succesful sending into BPC database, whereas the same data can be viewed by new template or ANYBYANY report.
Setting -- APPLICATION PARAMETER for LOCKREPORT.
The report launches when submission validation for a data region is not u20180u2019 in BPC Excel. The template should be located in the eExcel\Report\ folder., though it is currently available in the path eExcel\Input Schedules\Wizard\Validate.xlt.
Try this.
Cheers
Uma

Source Account Validation Report

Goodmorning,
I'm building source validation rules (without problem) but a boring problem occurs:
Scenario:
Location -- E2 (source entity:00002)
|__ E6 (source entity:00006)
|__ E7 (source entity:00007)
Validation report result:
E2
Rule 1 amount 123
Rule 2 amount 456
Rule 3 (source logic account based on 00002 accounts) 789
E6
Rule 1 amount 1000 (OK)
Rule 2 amount 5000 (OK)
Rule 3 (source logic account based on 00002 accounts) 789 [duplicated]
E7
Rule 1 amount 8000 (OK)
Rule 2 amount 9000 (OK)
Rule 3 (source logic account based on 00002 accounts) 789 [duplicated]
This means that for every rule based on source account and for every Entity I've a duplicated rule.
Obviously it's wrong and I know I need source entity (00002) to build correctly my source validation rule...
Q: how can I solve this issue avoiding duplicated rules? Building the same validation rule respectively for every source entity logic account the result would be an undesired report with 9 rules instead of 3.
Thanks,
Francesco

What version was this on and did you use assign Validation Entity and Rule groups?

Validation Report shows #MissingCaptionKey#

When performing the Validation step our system is showing "#MissingCaptionKey" for all of the headings / captions on the Validation report. I cannot determine what configuration is missing ... this appears to be Adapter specific.

Have you searched the knowledge base or the forum? This sounds like an issue that has been addressed previously...if my memory serves. Also, please take a moment to review this post and consider including the information that this post highlights:
Forum Posting Tips & Etiquette

Validation report failed in FDQM 11

Hello, I'm trying to get validation rules working in FDQM 11 and made settings according to documentation, but during check stage (4th fish) I'm getting error
could not find validation report with id equal to 87
What's wrong with my settings?

Hello,
It appears you have not completed the installation of the software as outlined in the Installation Guide.
This error occurrs when you did not import the reports XML.
Keep in mind that there are two report XML's depending on your database vendor (Oracle or Microsoft) and only one need to be imported into each FDM Application.
Thank you.

Failover Cluster Validation Report Error with IBM USB Remote NDIS Network device

We are setting up Microsoft Windows Server 2008 R2 Failover Cluster on IBM X3850 X5 and get errors in the Failover cluster Validation Report due to the IBM USB Remote NDIS Network Device is using APIPA adresses and both servers are using same APIPA-adresse.
How should I configure the Server and OS for the Failover cluster to be MS approved?
IBM don't recommend that i disable the Network device, but it is a possible solution!?!

What I did was use ipconfig /all to see the settings it is using and then when and set the ip setting on the NDIS driver to be that except I increment the last value by 1 for each node so that they do not have the same IP address. I ran the
cluster validation again and it came up clean and I have not experienced any issues yet. It does give warnings about it being an Automatic Private IP Address and should not be used, which is ok because we are not going to use it anyways.
Rich Baumet

Stage Analysis Report Issue

Hi,
I have run a stage analysis report but it says no data inspite of open opportunities being present in the system. Could anyone kindly let me know what could be the issue?
Regards
Sharat

Hi Sharat,
Welcome you to the forum. Please close your first thread.
Regarding your Stage Analysis Report Issue, what selection has been made? This report show closed opportunity only.
Thanks,
Gordon

GR/IR GL Reporting Issue

1. 30 documents of 2009 were matching and post with clear is perfomred. After performing post with clear also the line items are not moving from open line items. When we download the open line items as of today, these line items are appearing.
2. When we download the ZBLRFIOI report for GRIR a/c 349100 to have the opne line items. we have some set of documents showing as " FI Open items without J2" - This is reporting issues.
Thanks
Mallikarjuna

Hi
Pls try with F.13 for that GR/IR account 349100 by selecting check box select gl accounts
And give Company code, year and pending document numbers in selection screen
And before that pls make sure that OB74 clearing settings maintained or not
It will clear all the open items exists
Reg
Vishnu

BW Reporting Issue

Hi,
I am facing one reporting Issue relating to Display Attributes.
Characteristic: Business Partner
Display Attributes: Address0, Address1, Address3...etc.
Requirement is to display mentioned Display attributes along with Business Partner.
For this I have selected Business Partner as characteristic and mentioned above three as display attributes to Business Partner.
But Query out put is not showing Display attributes. For this I have done all settings at reporting level, all gone vain.
I am using Bex 7.0.
Kindly look in to the Issue and let me know the solution.
Regards,
Venkat.Mahipathi.
09886652422.
[email protected]

Hi,
Check in Reporting properties or check attributes in analyzer proprties then it will display
************asign points if usefull***********
swapna

CRVS2010 Beta - Error: No valid Report Source is available

I am new to using crystal reports in .NET so any (un-jargoned) help is much welcomed and appreciated.
I am implementing an web application on a Windows XP machine using VS2010 and have downloaded and installed the CR4VS2010 beta 2 and the CRforNET40_x86. All installed OK with no errors.
I have embedded a crystal report viewer into my web page and have populated a dataset (myDS) successfully from my SQL server connection earlier in the code.
The report (stoppages.rpt) is an untyped report stored in a separate folder and has 2 datetime parameters to pass in. When I run the web app it runs fine until the parameter boxes appear - I enter 2 valid date values into the parameter boxes when I hit OK I get an error - No valid report source is available.
My code is shown below - I have searched other forums and it was suggested to put in the session.add part but the error occurs with or without this bit in...
Please help - newbie and desparate! Thanks
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
            myReportDocument.Load("C:\Reports\stoppages.rpt")
            myReportDocument.SetDataSource(myDS)
            Session.Add("Report", myReportDocument)
            crvThisReport.ReportSource = myReportDocument
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Oct 13, 2010 7:22 AM

Hi Ludek, I tried adding
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
to the config file but it didnt resolve the problems.
However I think I have found a work-around solution to setting the parameters programmatically rather than use the crystal report viewer pop-up boxes. I am posting my code to help anyone else who might be experiencing the same problems:
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
myReportDocument.Load(Server.MapPath(strRptPath))
myDS.WriteXml(Server.MapPath(strXMLPath), XmlWriteMode.WriteSchema)
myReportDocument.SetDataSource(myDS)
myReportDocument.Refresh()
myReportDocument.SetParameterValue("DateFrom", #9/1/2010 6:35:00 AM#)
myReportDocument.SetParameterValue("DateTo", #9/8/2010 6:35:00 PM#)
crvThisReport.ReportSource = myReportDocument
DateFrom and DateTo are the parameter names within my crystal report.
It seems to be working fine, it stops the crystal report viewer from displaying the parameter pop-up box which stops the error occurring. However, the error still occurs when you want to interact with the report in other ways, ie page navigation, group tree navigation. It still allows me to print, export and zoom in and out, so I will have to disable some buttons and features until this error is resolved - the search continues!
Thanks for all your help and advise.
Edited by: juliep68 on Oct 14, 2010 11:33 PM

REP-1057: ' PATH_TO_REPORT/report.rdf' is not a valid Report Builder file.

Current Level : Report Builder 6.0.8.27.0
We migrated custom reports build on Report 2.5 to 6.0.8.27.0 on apps/db version
from 11.0.3 / 8.0.5 to 11.5.10.2/9.2.0.6. Platform was moved from HPUX to Redhat
Linux 4.
When we open migrated reports then original reports get converted and compiled
by Report Builder 6 without any problem. But once saved and when modified some
of the reports get corrupted and have 'REP-1057' error.
Anyone had any similar problem and found solution?
Thanks

I have a .rdf file. When I try to open the same in Report Builder for 6i, nothing happens! It just does not open!
I tried to convert the report into .REX from unix - I get the following error
REP-1057: 'FAIAPXINROH.rdf' is not a valid Report Builder file.
But, the report is running fine from Oracle apps.
I need to open this .rdf to change somethings.
Any suggestions?
Regards,
Arun Tirumale

FDM validation report issue

Similar Messages

Maybe you are looking for