Feature Request - CSS code generation for advanced font - type options

Thanks to everyone for the amazing work done in Photoshop and Illustrator to enhance the ability to generate and use character and paragraph styles translated to CSS. The last two releases have brought designers something they could only dream of and talk about for the last decade, and now these tools are being delivered!
This request is to consider being able to use advanced character styles in Illustrator, such as X/Y percentage height/width of fonts, rotation or baseline shift to generate CSS for these options. As of this post, I haven't been able to find that CSS3 even supports these options, except possibly the 'font-stretch' rule, which does not appear to be supported yet in most browsers - see CSS Fonts Module Level 3 - W3C Candidate Recommendation, October 2013.
Sometimes, designers get very picky about wanting type to look just so, including making fonts look taller or wider in a design, although perhaps much to the horror of the original type designer
thanks very much,
Mark

I'll also add this is a feature that should be carried over into Adobe Photoshop too.
Within Adobe Photoshop if you want to size type in terms of pixels the type is, again, sized according to the Em square. Unless you're setting type at pretty large pixel sizes the rendered type really ends up looking pretty bad. That's because the edge of the baseline and the edge of the cap height line are never aligned to the pixel grid. You end up with type that's fuzzy looking on all sides. If designers were able to tell Photoshop "make this lettering 20 pixels tall according to the capital letters" the lettering would looking a whole lot better. Perfectly crisp edges on the base lines and cap height lines.

Similar Messages

  • Error in code generation for deleting table BUT000_TD

    Hi,
    Did anyone encounter this error while working on EEWB ?
    I created the project extension via EEWB and completed the wizard setting with the package (dev. class) value as $temp as I wanted to test it locally.
    One of the errors, that I got is:
    Error in code generation for deleting table BUT000_TD
        Message no. DA464
    Diagnosis
        This error message indicates that internal inconsistencies exist.
    Procedure
        Please consult SAP.

    Hi,
    As I mentioned in my previous post kindly check the consistency of the structure BUT000_TD.
    Regards,
    Sudheer.

  • Default Code Generation for a Custom Class for an Application Module

    hi all
    Oracle® Fusion Middleware
    Fusion Developer’s Guide for Oracle Application Development
    Framework
    11g Release 1 (11.1.1)
    with Jdeveloper TP3 ,
    By default, the application module Java class will look similar to what you see in
    Example below when you've first enabled it. Of interest, it contains:
    ■ Getter methods for each view object instance in the data model
    ■ A main() method allowing you to debug the application module using the
    Business Components Browser
    [package devguide.model;
    import devguide.model.common.StoreServiceAM;
    import oracle.jbo.server.ApplicationModuleImpl;
    import oracle.jbo.server.ViewLinkImpl;
    import oracle.jbo.server.ViewObjectImpl;
    // --- File generated by Oracle ADF Business Components Design Time.
    // --- Custom code may be added to this class.
    // --- Warning: Do not modify method signatures of generated methods.
    public class StoreServiceAMImpl extends ApplicationModuleImpl {
    /** This is the default constructor (do not remove) */
    public SRServiceImpl() { }
    /** Sample main for debugging Business Components code using the tester */
    public static void main(String[] args) {
    launchTester("devguide.model", /* package name */
    "SRServiceLocal" /* Configuration Name */);
    /** Container's getter for YourViewObjectInstance1 */
    public ViewObjectImpl getYourViewObjectInstance1() {
    return (ViewObjectImpl)findViewObject("YourViewObjectInstance1");
    // ... Additional ViewObjectImpl getters for each view object instance
    // ... ViewLink getters for view link instances here
    when i try this i didn't find the default generation for main method
    have i do something before enable custom java file for Application module
    hope to hear from you soon

    hi nonStop
    Since you are using Jdeveloper TP3, this might be a better place to ask your question:
    "JDeveloper and OC4J 11g Technology Preview"
    JDeveloper and OC4J 11g Technology Preview
    success
    Jan Vervecken

  • 9.7.3 Default Code Generation for a Custom Class for an Application Module

    hi all
    Oracle® Fusion Middleware
    Fusion Developer’s Guide for Oracle Application Development
    Framework
    11g Release 1 (11.1.1)
    with Jdeveloper TP3 ,
    By default, the application module Java class will look similar to what you see in
    Example below when you've first enabled it. Of interest, it contains:
    ■ Getter methods for each view object instance in the data model
    ■ A main() method allowing you to debug the application module using the
    Business Components Browser
    [package devguide.model;
    import devguide.model.common.StoreServiceAM;
    import oracle.jbo.server.ApplicationModuleImpl;
    import oracle.jbo.server.ViewLinkImpl;
    import oracle.jbo.server.ViewObjectImpl;
    // --- File generated by Oracle ADF Business Components Design Time.
    // --- Custom code may be added to this class.
    // --- Warning: Do not modify method signatures of generated methods.
    public class StoreServiceAMImpl extends ApplicationModuleImpl {
    /** This is the default constructor (do not remove) */
    public SRServiceImpl() { }
    /** Sample main for debugging Business Components code using the tester */
    public static void main(String[] args) {
    launchTester("devguide.model", /* package name */
    "SRServiceLocal" /* Configuration Name */);
    /** Container's getter for YourViewObjectInstance1 */
    public ViewObjectImpl getYourViewObjectInstance1() {
    return (ViewObjectImpl)findViewObject("YourViewObjectInstance1");
    // ... Additional ViewObjectImpl getters for each view object instance
    // ... ViewLink getters for view link instances here
    when i try this i didn't find the default generation for main method
    have i do something before enable custom java file for Application module
    hope to hear from you soon

    hi nonStop
    Since you are using Jdeveloper TP3, this might be a better place to ask your question:
    "JDeveloper and OC4J 11g Technology Preview"
    JDeveloper and OC4J 11g Technology Preview
    success
    Jan Vervecken

  • Feature request: Slideshow module support for video files

    I'm very excited about your MTS support!
    Feature request: Slide show module  support for video files...
    Say you have 10 takes to choose from. Are you able to almost like SLIDESHOW view the 10 clips full screen so you can decide, like a playlist? Or rate them as they play? It would also be great, like SLIDESHOW to be able to export a MP4 with a title, the 10 clips you are working with, and maybe add an end title and a song, just like SLIDESHOW.
    I have found editing stills like this in slideshow far faster than in any other editing program.
    Basically, I just need a fast means to view or export an MP4 of a set of video clips to review. You are almost there.
    great job!!!
    Max

    I was also disappointed that video is not supported in the slideshow module -I currently have to use another solution when I want stills mixed with videos, would be great to be ablo to keep it all in LR!

  • Feature Request: Color code lightroom folders

    I have several hundred folders inside of lightroom. I would like to colorcode "favorite" folders to make them easier to find when moving imported photos from "Dated" folders into subject specific folders. Seems like this should be easy,
    Or is there already a way to do this?
    Collections will accept selected pictures but how about selected folders?

    The place to add your voice to an existing feature request.
    http://feedback.photoshop.com/photoshop_family/topics/colour_coding_folders_and_collection s_to_simplify_navigation_cataloguing
    This is a user-to-user forum.

  • Feature Request: use volume rocker for brightness

    I find myself wishing I could adjust the screen brightness quickly using the rocker switch currently dedicated to volume. I seldom have need to adjust the volume, and if I did, it would also be helpful is that function could just be part of the open app, leaving the rocker switch to quickly adjust to changing light settings. (the auto brightness basically seems to have two settings: regular and slightly dimmer than regular)

    Welcome to the forums, Tyrade. One of the first things to know is that we're all users here, just like yourself. While you may have a well-thought out feature request, posting it here goes nowhere.
    Submit feedback here: http://www.apple.com/feedback/iPad.html.
    Thanks.

  • New Tax code Creation for CST(Condition type

    Hi Friends,
    I am facing an issue during creation of new Tax-code for CST; condition type JIN1. After defining the tax percentage; system is picking an automatic G/L account, which is a grey field and can't be editable. We need to change G/L account and need to assign a new one.
    Can you please tell us how can we remove the default assigned and non-editable G/L account.
    Your support is appreciable.
    Rgds, Krishan Raheja.

    Hi Krishnan,
    Use transaction OB40, here double click on the Account Key (you can check this account key assigned to condition type in OBQ3 and also in FTXP screen) that is mapped to condition type JIN1 and enter your chart of accounts. Now change the G/L account you want.
    Regards,
    Chintan Joshi.

  • Create custom code colouring for additional file types

    Hi All,
    I spend a lot of time editing .ini files in Dreamweaver (in my case langague files for custom Joomla extensions). Although the file format is extremely  simple, particularly in the way that they re used in this context, I would like to improve the readability by adding code coloring  for strins, standard text and comments.
    I haven't been able to find any really useful information on the web about how to go about doing this.
    From what i can gather, the steps are
    Get Dreamweaver to recognise the file type (editing Extensions.txt and MMDocumentTypes.xml?)
    Add the code coloringxml file.
    So far I've had no success with the first step, so haven't tried the second.
    It would be great if I caould also add it as an option in the New File dialog.
    If some kind and clever person could point me in the right direction, it would be much appreciated.
    I'm in Dreamwaever CC on Windows 7, if that's relevant
    Cheers
    Keith

    From what i can gather, the steps are
    Get Dreamweaver to recognise the file type (editing Extensions.txt and MMDocumentTypes.xml?)
    Add the code coloringxml file.
    So far I've had no success with the first step, so haven't tried the second.
    It would be great if I caould also add it as an option in the New File dialog.
    What have you tried so far that made you think that you were not successful?  To add new file extensions to be recognized in DW, you need to go to:
    Edit >> Preferences and then look for something like in this picture:
    Now this is in CS6 and I suspect the steps should be similar in CC.  If not then CC is a step backwards in terms of progress in current technology IMO.  I don't use CC so can't comment any further here.
    Good luck.

  • FEATURE REQUEST: Independently zoom page size and font size

    Firefox lets me zoom the page in and out, which is great, but usually useless. The problem I usually have is that font is the right size, but the text doesn't all fit in the window. What Firefox needs is a way to independently zoom text and page size. Then, I could fit all of the text in the window without making the text microscopic. Here's how it would work: CTRL+- ZOOMS JUST THE PAGE SIZE. The text size would remain the same. CTRL-SHIFT+- ZOOMS JUST THE TEXT. The page size would remain the same.
    I know this is possible. The fact that Firefox can zoom the text only without affecting the page size is evidence of that. Firefox is always looking for good ideas that have never been done before. Well, this is one of them. Do it, and we would love you all forever!

    Web pages with a fixed width layout will always be a problem for any zoom feature. Assuming Firefox wants to adjust the layout so it can't exceed the width of the window, should it just do a proportional adjustment of widths or try to keep sidebars the same while reducing a main area, or wrap a sidebar to the bottom of the content (as though it were a floated element), etc., etc. Maybe the experience of programming zoom on mobile browsers will feed back some learning to desktop browsers, but UI designers have a long way to go there as well.
    In the short run, maybe something like the [https://addons.mozilla.org/en-us/firefox/addon/readability/ Readability extension] will help tame those unruly layouts?

  • Code generation for spring/ibatis or hibernate

    http://www.mynewsbot.com/rapiddeploy .. I have a beta here and would apreciate some feedback

    Hello D,
    Thanks for your reply, but the ticket codes should be
    generated on the fly. This makes it impossible to
    reserve a block of ticket codes.
    Erwin.Why does the "on the fly" generation of ticket codes prevent you from reserving blocks of codes? If you're saying that they mustn't be contiguous that's not the same thing.
    Dave.

  • Feature request: Allow direct connections for contacts only

    Hello, on Windows there is an option "Allow direct connections to contacts only" as described on http://en.kioskea.net/faq/32357-skype-hide-your-ip-from-people-who-are-not-on-your-contact-list. Many people including myself would like to see this feature implemented in the Linux client. There are solutions to protect the IP from resolvers like setting up proxies. However, the performance of free SOCKS-proxies is mostly very bad. VPNs with an appropriate bandwidth also cost an amount of money and additionally, it is difficult to only route Skype traffic through a VPN. Setting up a VM with Windows or WINE just to run Skype is an overkill as well. I consider it inconvenient that this feature is implemented on Windows while - in my opinion - mainly Linux users being aware of security might be in need for this feature. Therefore, I request to implement such a functionality into the Linux client. Kind regards from Germany

    If  you want to enable that feature on a Skype client that does not offer it in the GUI you would have to do it manually.  You can follow the guidance here and the same information applies to the Linux client and any other client you have root or file-level access to. http://community.skype.com/t5/Modern-Windows-from-Windows/Windows-8-IP-Hiding/m-p/2876437/highlight/true#M19476 Linux path:/home/Username/.Skype/YourSkypeName/config.xml

  • Code generation for business partner

    Hi, all
    In our scenario we need to assign a unique code to business partner record as soon as it is approved by data manager (in MDM workdlow). This assignment should be automatic. Next incremental number would suffice, but AutoID field can't be used for this purpose since it automatically assigns numbers even to new, still not approved records.
    Some kind of this pseudocode in assignment would be great:
    CODE = MAX(CODE)+1
    Where MAX(FIELD) is a function returning maximal value in FIELD field in current table.
    But I couldn't find such function in data manager standard functions list.
    Can anyone suggest a solution?
    Vadim

    hi thanks for your valuable replies...
    i changed the codes...pls check its right or wrong
    declare @temp as char(20)
    IF $[OCRD.GroupCode] = 104  and $[OCRD.cardtype] = 'c'
    BEGIN
    set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where (groupcode= 104) and (len(cardCode)=7))
    set @temp='TRA'isnull(replicate(0,7-len(@temp)),'')@temp
    select cast(@temp as char(20))
    END
    ELSE IF $[OCRD.cardtype] = 'C'
    BEGIN
    set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where   (len(cardCode)=7))
    set @temp='C'isnull(replicate(0,7-len(@temp)),'')@temp
    select cast(@temp as char(20))
    END
    ELSE IF $[OCRD.cardtype] = 'S'
    BEGIN
    set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where   (len(cardCode)=7))
    set @temp='S'isnull(replicate(0,7-len(@temp)),'')@temp
    select cast(@temp as char(20))
    END
    Thanks & Regards
    B.Lakshmi Narayanan

  • CE 7.1 SP3 Code generation for Java 1.4.2

    Hi,
    Is it possible to use the Ce 7.1 SP3 environment to develop components for WAS 6.4 ?. 
    Though I have configured the compiler to be Java 1.4 compliant, the code generated still contains Java 5 constructs and thus will not compile correctly. (e.g. @SuppressWarnings("unused")).
    Thanks

    NO chance.
    Regards,
    Benny

  • Feature Request:  Third video output for script

    It would be nice if VC allowed not only full screen output of the master video, but full screen outupt of the teleprompter while still maintaining control.
    This would let somone be the talent, and someone be the director.  If you run the teleprompter inf ull screen mode, it takes away the Director's screen.
    It would mean a lot of memory and three video cards.
    Other features: Ability to do more on the fly - such as run videos, sound, etc with hot keys, Video banks, etc. There are programs meant for church multi media that can do this (but can't chroma key, save video files, etc)

    Great suggestion, I'll check 'em out.  It also seems likely that somebody manufactures a FireWire-powered device that could do the job.  I thought my old ADS PyroAV might work (Standard Def only, of course), but it only outputs a still picture of wherever Final Cut Pro's playhead was last parked.  Crystal-clear video, but it essentially frame-stores and displays whatever still image it last "saw".  Weird, huh?

Maybe you are looking for