Fetch currency key for KONV-KBETR

Hi All,
We have a requirement of fetching KBETR(Rate (condition amount or percentage) value from KONV table.However in the Currency/Quantity tab the field KBETR is been referenced to a field of structure hence we are not able to pull the currency key for the same.
KONV is a cluster table
Please let me know how can i resolve this.

Hi,
The currency key is stored in the field WAERS of KONV table. And therefore you can use that as a refrence field.
regards,
Advait
Edited by: Advait Gode on Dec 2, 2008 9:11 AM

Similar Messages

Currency key for amount of zero

I load an ODS and have an amount assoociated to 0currency. When the amount is zero, the currency key is not loaded into ods even though there is a key in source?

Check the update rules for the object as well as the start routine for any restriction on Zero amount.
Hope this helps.
Bhargava

Currency key for Conversions using NODIM

Hello Experts,
I have question related to Currency key.
I have below mentioned scenario -
My Report output looks something like this
Doc No|Doc Value| 500 |USD |
so KF value and currency key(USD) are in seperate fields(column in Bex Report)
I seperated them by doing NODIM on KF and including the Currency key in Report.
The problem arise when I do currency conversion.
So on the initial Selection screen I gave user an option to run by different currency, so when he select lets say CAD.
The KF does get converted from USD to CAD but my currency key still remains a USD, whereas I would like to show that one based on what user entered on initial Selection screen(which would be CAD in this case).
I have searched forum for this but couldn't find proper solution.
Any guidance is appreciated. Thanks in advance.
Regards,
DNP

Hi friend
If you are working on UAE, the country grouping have to use is 99.
Check with your FI guy that he had assigned the currency AED to your company code. You can view this in table V_T001.
When you define the personel area, do give country as AE in table T500P
You can default your currency as per pays Scale type and Pay scale area in table V_T510F_B selecting country grouping 99.
I hope this will resolve your problem.
Regards
Santhosh.S

Defining currency key for currency type

Hi
I have to define the currency group in the controlling area as 30 (Group Currency). There are three company codes which have to be assigned to this controlling area. However, the system is not accepting the same and giving an error message " Difference in currency INR does not match SGD".
Similarly while defining another currency in company code, for currency type 30, the system is giving an error message, "Currency Key no defined for Group currency". Pls help
Regards
Sanil Bhandari

> Hi
>
> You can reward points too with thanks.
>
> Regards,
> vivek
Hi
I have already ticked the check button for problem solved which carries the maximum 10 points for the same to you
Regards
Sanil

How we can Define a currency key for currency type 40? message no:fc045 all of them saying (oy01) but there we can define that

Hi,
Kindly find below screen shot for above issue.

Hi Prasad Venkat,
Request you to check the below link for further details.
http://scn.sap.com/thread/1296592
Thanks,
Vishal

Amount formatting based on Currency Key

Hi,
I want to format the amount field on the basis of the currency key.
for eg.
Chile has the no of decimal places set as 0
so for Chile, the amount 800.00 should display as 800
Similarly for Mexico, the no of decimal places is set as 2.
so for Mexico, the amount 800.00 should display as 800.00.
I am using the follwoing statement
WRITE im_amount TO v_amount
                    CURRENCY im_waers
                    DECIMALS v_dec_places.
where v_amount is type char20 and im_amount is type netwr.
This is working correctly for Mexico but fails for Chile.
Please share your comments on this.
Thanks in Advance,
Binu

The following write statement gives the perfect result.
WRITE v_amount TO v_fmt_amt
                 decimals v_dec_places
                 no-grouping
                 left-justified.
I was not getting the result on using both the currency as well as Decimals addition. The desired result is obtained on only using the Decimals addition.
And I used the FM, 'G_DECIMAL_PLACES_GET' to get the decimals for the respective currency key.
Thanks a lot for your response.
Regards
Binu

Condition rate/Amount (KONV- KBETR) is showing wrongly for Japanse currency

Dear Friends,
The Table data for the Condition rate/Amount (KONV- KBETR) is showing wrongly for Japanse currency(JPY).For ex-The invoice is showing correctly as 3 JPY but the Invoice output shows 300 JPY.This data being fetched from the KBETR shows 300JPY instead of 3JPY.Pl help to resolve this.
Thanks
Isaac

Dear Isaac,
This may due to condition record maintainenance for that condition type in the VK11 transaction so please go to VK12 transaction check the condition value for that condition type.
KBETR -- Means Rate (condition amount or percentage) where no scale exists, it exists in KONP table(Condition record table).
Also Check anybody change the values in the sales order or in invoice from 300 to 3.
I hope this will help you,
Regards,
Murali.

Need an alternative way to fetch KONV-KBETR.

Hi All,
I need to fetch Condition Amount (KONV-KBETR) for a particular Z Condition type (KONV-KSCHL).
I used the logic :
Fetch VBAK-KNUMV based on VBELN.
Fetch KONV-KBETR based on KNUMV.
But i need some other way to retrieve this value, as if some changes are made in the transaction for the condition value then they are not updated in KONV table.the change can be seen in the transaction VA03 for the Sales Order but the table KONV retains the old value.
Is there any way to fetch it apart from KONV, or any FM?
Thanks!!

Thanks Shambhu!!
I think this FM require quite many fields as input,like i get error for some field Sales Deal (KNUMA_AG).
Besides this FMM uses KONV so will I get the updated value?
Is there any change table for KONV?

Currency Translation for Calculated Key figures

Hello Friends I want to use the Currency Translation for Calculated Key figures.
But when I go to Query and go to conversion tab it is always greyed out. Does that mean we can set the fixed conversion type for calculated key figures. like ZSAD Total debit - credit -flow value.
What is the way to do fixed currency translation in query for calculated key figures.
All the below is done now just want to specify this in query but I can'nt since it is greyed out.
All the below is done
I have created a Currency Translation Type " FiscperConversion" "ZVHGR" now this has Exchange Rate Type from Variable "ZVARN" (Which is a variable single value manual input on 0RTYPE Infoobject for exchange rate.)
2. Now Currency Tab: Target Currency is selected from Variable placed in the Report. ZRPVAR.
3. Now the Variable Time Reference is used. Standard Infoobject 0FISCPER
which is beginning of period.

Hi soniya
Your calculated KF is result of some calculation ...so system will not allow u to do any translation on it...to get CT on CKF you should do it on base key figure...still if you wish to do then you can create a formula variable having processing type a customer exit...write code in cmod to rad exchange rate and multiply ur CKF by this formula variable....
Thanks
Tripple k

Currency translation for key figure in bex not working.

Hi friends,
i want to do currency translation for key figure(invoice value in local currency).
i have followed the steps as under:
1st Transferring Global Table Contents: Currencies from R/3 Systems
2nd than transfer exchange rate - from r/3 to bi
3 than In SPRO settings of BW there is option "consider translation ratios in translation"
4th than used transaction RSCUR for creating currency translation type: parameter(exchange rate:m, soure currency fom data records, target currency ISK, time ref: current date)
5th than in BEX query designer have sated this for key figure
but when i run query in RSRT, curreny amount not getting convert?
am i missing any step?
pl. guide.
thanks dushyant.

Hi Dushyant,
Are these steps followed in Query designer??
In the Query designer, for that particular key figure property, under Conversion tab >> Currency Translation >> Conversion Type, select the currency translation type you created in RSCUR.
And in the target currency, select accordingly.
If you are going to use a variable, use the following link..
http://help.sap.com/saphelp_nw04/helpdata/en/08/81b98b95e911d4b2ca0050da4c74dc/content.htm
See also..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/287bab90-0201-0010-f48e-cc55b0cd13d0
Hope this helps..!
-Pradnya
Edited by: Pradnya Rane on Apr 8, 2009 7:58 AM

Regarding currency translation for Display attribute(key figure)

Hi Gurus,
How can i do currency conversion for MATERIAL COST(key figure) ,which is Display Attribute of MATERIAL...
thanks advancely.......
CHANDRA

Hi,
You can create the currency conversion type in the T code RSCURR.
Here are the steps...
1.     Transaction for creating currency translation type is RSCURR
2.     Choose the Exchange rate, Source currency, Target Currency and the Time reference in the respective tabs.
3.     In the query definition choose the Currency Conversion Key in the properties of the Key-figure.
Regards,
Yogesh.

Serch help for list of currency key

Hi friends,
Can any budy tells me what is the search help to get list of currency key.
like
INR,
USD,
EUR
Thank you.
Regards,
Virat

Hi
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Thanks
Ashu

F4 help values for currency key field in table

Hi all,
I have added currency and currency key fields in my Z table. For the curreny key field, i have assigned the standard data element WAERS. I have implemented Table Maintenance Generator for my table. But the F4 help values for the currency key field is not appearing when i tried to maintain table entry.
Should i need to check the Foreign key check box for the field attribute? But this check box is in disable field in screen layout.
Could someone tell me how to solve this issue?

Hi,
Make the check table of the currency field of your Ztable as TCURC,which is the master table of Currency.Inside the domain of the field you write the TCURC as a value table.and make foriegn key relationship with the TCURC table.
Regards,
Suvajit.

User exit for price check( KONV-KBETR )

hi,
i need to put price check in sales order on field KONV-KBETR . for this i need a user-exit. can any one help me in this.
regards,
pavan,

Hi,
There is no problem with the pricing config here. When ATP check is performed, the system checks the availability in APO system and redetermines the pricing so the pricing is lost.
I am just looking our for a solution, where in I can store the data in internal table and when ATP check is completed, transfer the changed price from internal table back to the sub-line.
I am just looking into RV61AFZB with user exit USEREXIT_XKOMV_FUELLEN. Appreciate any help in finding the user exit for this requirement.
Best regards,
Siva

Select query for KONV and VBAK table

hy Experts.
Please Help me For this Query, i got error on it.
I wnt to take KONV-KBETR (RATE FIELD) for particular SO number. and i used following query but it gives error i cant relate VBAK & KONV table.
Please do needful
SELECT KBETR KNUMV FROM KONV INTO (ITAB-KBETR, ITAB-KNUMV) WHERE VBAK-KNUMV = KONV-KNUMV AND VBAK-VBELN IN VBELN.
Thnks
Bhavesh Panchal.

Hello Thnks For Reply,
but still i cant take solution. i am making a Sales order Rports. i got all field but i cant fetch filed for RATE and Pending Order Value.
Please check following Code. if need to change u can.
Thnks
Bhavesh Panchal.
REPORT ZTESTCODE.
TYPE-POOLS:slis.
TABLES: VBEP , VBAP , VBPA , VBKD , VBAK , LIKP , LIPS , VBUP , VBBE, KONV, KNA1.
DATA :BEGIN OF itab OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
EDATU LIKE VBEP-EDATU,
KNUMV LIKE VBAK-KNUMV,
WMENG LIKE VBEP-WMENG,
BMENG LIKE VBEP-BMENG,
LFIMG LIKE LIPS-LFIMG,
OMENG LIKE VBBE-OMENG,
POSAR LIKE VBAP-POSAR,
NETWR LIKE VBAP-NETWR,
NTGEW LIKE VBAP-NTGEW,
KBETR LIKE KOMV-KBETR,
KUNNR LIKE VBAK-KUNNR,
NAME1 LIKE KNA1-NAME1,
*BRGEW LIKE VBAP-BRGEW,
BSTKD LIKE VBKD-BSTKD,
BSTDK LIKE VBKD-BSTDK,
LFSTA LIKE VBUP-LFSTA,
*KNUMV LIKE VBAK-KNUMV,
*posnr LIKE LIPS-POSNR,
*NETWR LIKE VBAK-NETWR,
BRGEW LIKE VBAP-BRGEW,
LFDAT LIKE LIKP-LFDAT,
*NTGEW LIKE LIKP-NTGEW,
DELIVERY LIKE LIPS-VBELN,
WEIGHT like VBAP-NTGEW,
END OF itab.
*variable for Report ID
DATA: v_repid LIKE sy-repid .
*declaration for fieldcatalog
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
      wa_fieldcat TYPE slis_fieldcat_alv.
DATA: it_listheader TYPE slis_t_listheader.
declartion for layout
DATA: alv_layout TYPE slis_layout_alv.
*Title displayed when the alv list is displayed
*DATA: i_title_main TYPE lvc_title VALUE 'FIRST LIST DISPLAYED'.
DATA: i_title_main TYPE lvc_title VALUE 'Reports : Bhavesh Pacnhal'.
INITIALIZATION.
v_repid = sy-repid.
PERFORM build_fieldcatlog.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
     SELECT-OPTIONS : VBELN FOR VBAK-VBELN ,
                      KUNNR FOR VBPA-KUNNR ,
                      EDATU for ITAB-EDATU.
SELECTION-SCREEN: END OF BLOCK b1.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_listheader USING it_listheader.
PERFORM display_alv_report.
FORM build_fieldcatlog.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'VBELN'.
wa_fieldcat-seltext_m = 'SalesOrderNo'.
wa_fieldcat-outputlen = '12'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Field for Customer Name.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'NAME1'.
wa_fieldcat-seltext_m = 'Customer Name'.
wa_fieldcat-outputlen = '30'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Field For Po Number.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'BSTKD'.
wa_fieldcat-seltext_m = 'PO No'.
wa_fieldcat-outputlen = '20'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
Field For Order Value
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'NETWR'.
wa_fieldcat-seltext_m = 'Order Value '.
wa_fieldcat-outputlen = '12'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Field For Po Date.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'BSTDK'.
wa_fieldcat-seltext_m = 'PO Date'.
wa_fieldcat-outputlen = '20'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'POSNR'.
wa_fieldcat-seltext_m = 'Item No'.
wa_fieldcat-outputlen = '20'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'EDATU'.
wa_fieldcat-seltext_m = 'Delivery Date'.
wa_fieldcat-outputlen = '12'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-tabname = 'VBAP'.
wa_fieldcat-fieldname = 'KWMENG'.
wa_fieldcat-seltext_m = 'Order QTY VABP.'.
wa_fieldcat-outputlen = '14'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Field For Order Qty.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'WMENG'.
wa_fieldcat-seltext_m = 'Ord.QT.WMEN.'.
wa_fieldcat-outputlen = '20'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Field For Order Qty.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'BMENG'.
wa_fieldcat-seltext_m = 'Ord.QT.BMEN.'.
wa_fieldcat-outputlen = '20'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
field For Delivery Qty.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'LFMING'.
wa_fieldcat-seltext_m = 'DEL QTY.'.
wa_fieldcat-outputlen = '20'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Field For Open Qty from ITAB.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'OMENG'.
wa_fieldcat-seltext_m = 'OPEN QTY.'.
wa_fieldcat-outputlen = '20'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Field For Pending Weight from ITAB.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'BRGEW'.
wa_fieldcat-seltext_m = 'Pending Weight'.
wa_fieldcat-outputlen = '12'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
Field For netweight.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'NTGEW'.
wa_fieldcat-seltext_m = 'Net Weight'.
wa_fieldcat-outputlen = '20'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Field For Actual Delivery.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'LFDAT'.
wa_fieldcat-seltext_m = 'Actual Delivery'.
wa_fieldcat-outputlen = '12'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'KBETR'.
wa_fieldcat-seltext_m = 'RATE'.
wa_fieldcat-outputlen = '20'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
Field For Actual Delivery.
wa_fieldcat-tabname = 'LIPS'.
wa_fieldcat-fieldname = 'POSNR'.
wa_fieldcat-seltext_m = 'Delivery ITEM'.
wa_fieldcat-outputlen = '20'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
Field For Pending Value.
VBUP-LFSTA
wa_fieldcat-tabname = 'VBUP'.
wa_fieldcat-fieldname = 'LFSTA'.
wa_fieldcat-seltext_m = 'Pending Value'.
wa_fieldcat-outputlen = '20'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
Field For pending weight.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'ITAB-OMENG * KOMV-KBETR'.
wa_fieldcat-seltext_m = 'Pending VALUE'.
wa_fieldcat-outputlen = '20'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
ENDFORM.                    "BUILD_FIELDCATLOG
FORM data_retrieval.
SELECT VBELN NETWR KUNNR FROM VBAK INTO (ITAB-VBELN,ITAB-NETWR,ITAB-KUNNR) WHERE VBELN IN VBELN .
SELECT POSNR POSAR BRGEW FROM VBAP INTO (ITAB-POSNR,ITAB-POSAR,ITAB-BRGEW) WHERE VBELN = ITAB-VBELN .
SELECT EDATU FROM VBEP INTO (ITAB-EDATU) WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
SELECT NAME1 FROM KNA1 INTO (ITAB-NAME1) WHERE KUNNR = ITAB-KUNNR .
SELECT BSTKD BSTDK FROM VBKD INTO (ITAB-BSTKD,ITAB-BSTDK) WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
SELECT VBELN LFIMG FROM LIPS INTO (ITAB-DELIVERY, ITAB-LFIMG) WHERE VGBEL = ITAB-VBELN AND VGPOS = ITAB-POSNR.
SELECT LFDAT NTGEW FROM LIKP INTO (ITAB-LFDAT,ITAB-NTGEW) WHERE VBELN = ITAB-DELIVERY .
SELECT WMENG BMENG FROM VBEP INTO (ITAB-WMENG,ITAB-BMENG) WHERE VBELN IN VBELN .
SELECT SINGLE OMENG FROM VBBE INTO (ITAB-OMENG) WHERE VBELN IN VBELN.
SELECT SINGLE NETWR FROM VBAK INTO (ITAB-NETWR) WHERE VBELN IN VBELN.
SELECT KNUMV FROM VBAK INTO (ITAB-KNUMV) WHERE VBELN IN VBELN.
*SELECT KBETR KNUMV FROM KONV INTO (ITAB-KBETR, ITAB-KNUMV) WHERE KNUMV = VBAK-KNUMV.
*assign VAR1 = itab-kbetr.
*append itab.
*ENDSELECT.
SELECT KBETR KNUMV FROM KONV INTO (ITAB-KBETR, ITAB-KNUMV)WHERE KNUMV = VBAK-KNUMV.
ITAB-KBETR = KONV-KBETR.
ENDSELECT.
APPEND ITAB.
ENDSELECT.
ENDSELECT.
ENDSELECT.
ENDSELECT.
ENDSELECT.
ENDSELECT.
ENDSELECT.
ENDSELECT.
ENDSELECT.
*ENDSELECT.
ENDFORM.                    "data_retrieval
FORM build_listheader USING it_listheader TYPE slis_t_listheader.
DATA HLINE TYPE SLIS_LISTHEADER.
DATA: ls_line TYPE slis_listheader.
bhavesh
HLINE-INFO = 'report Developed by Bhavesh'.
HLINE-TYP = 'H'.
Header
Bhavesh
CLEAR ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = 'Sales ORDER Report'.
APPEND ls_line TO it_listheader.
bhavesh
***Selection
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-key = 'Key 1'.
ls_line-info = 'SFEL'.
APPEND ls_line TO it_listheader.
ls_line-key = 'Key 2'.
ls_line-info = 'SFEL'.
APPEND ls_line TO it_listheader.
***Action
CLEAR ls_line.
ls_line-typ = 'A'.
LS_LINE-KEY: not used for this type
ls_line-info = 'Status list'.
APPEND ls_line TO it_listheader.
ENDFORM.                    "BUILD_LISTHEADER
*ENDFORM.                   "build_listheader
FORM display_alv_report.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = v_repid
   I_CALLBACK_PF_STATUS_SET          = 'STATUS'(002)
     i_callback_user_command           = 'USER_COMMAND'
   i_callback_top_of_page            = 'TOP_OF_PAGE'
     i_grid_title                      = 'SFEL SALES EXPEDITING REPORT'
     i_background_id         = 'ALV_BACKGROUND'
I_GRID_SETTINGS                   =
IS_LAYOUT                         = LAYO
IS_LAYOUT                         = ALV_LAYOUT
    it_fieldcat                       = i_fieldcat[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
    i_default                         = 'ZLAY1'
    I_SAVE                            = 'A'
    is_variant                        = i_variant
    IT_EVENTS                         = V_EVENTS
    TABLES
      t_outtab                          = itab[]
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "display_alv_report
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = it_listheader[].
     i_logo             = 'ENJOYSAP_LOGO'.
   I_END_OF_LIST_GRID       =
ENDFORM.                    "TOP_OF_PAGE

Fetch currency key for KONV-KBETR

Similar Messages

Maybe you are looking for