Regarding  currency translation for Display attribute(key figure)

Hi Gurus,
How can i do currency conversion for  MATERIAL COST(key figure) ,which is  Display Attribute  of MATERIAL...
thanks advancely.......
CHANDRA

Hi,
You can create the currency conversion type in the T code RSCURR.
Here are the steps...
1.     Transaction for creating currency translation type is RSCURR
2.     Choose the Exchange rate, Source currency, Target Currency and the Time reference in the respective tabs.
3.     In the query definition choose the Currency Conversion Key in the properties of the Key-figure.
Regards,
Yogesh.

Similar Messages

  • Currency translation for a restricted key figure in Query designer

    Dear Experts,
    In my query i am using a restricted Keyfigure (ZRKF1 which is reusable). I have to change the currency translation key of the restricted Key Figure  from zcur1 to zcur2. I am not able to edit zrkf1 Currency translation in the properties( It is in gray colour) ,while i can do it for a normal keyfigure.  if i edit zrkf1 then other queries will be affected. How should i solve this? Can i copy and paste the zrkf1 to zrkf2 in order to use zrkf2 with currency translation zcur2 in my query ? How can i coy and paste restricted key figure?
    Thanks,
    Riya

    Hello Riya
    I think you can't change the currency transaltion type for RKF... to change it in RKF just make the changes in the KF which you have used in RKF....
    If you don't want to change the CURR translation type in KF1 than copy it paste it (KF2)and change in that KF2...now u can use KF2 in restricted KF...
    Thanks
    Tripple k

  • Currency Translation with a Calculate Key Figure

    Hi,
    Does anyone have experience with applying currency translation in BEX/Query Designer on a Calculated Key Figure? 
    I have a need for a calculated key figure to be converted to a target currency of USD (which is already defined via RRC1).  I also need the Results Row to display the summation in USD. 
    Currently, my calculated key figure displays two currencies (MYR and USD) and an incorrect summation of both currencies.
    Here is how I have defined my calculated key figure:
    NODIM ( 'Consumption (STOs)' ) * NDIV0 ( 'Material Source Plant Cost' / NODIM ( 'Source Plant Price Unit' ) )
    I am multiplying a quantity field by amount field and then dividing by a price per unit field.  I have applied NODIM on the other fields so that the amount field will retain it's properties.
    Running this query through transaction RSRT and clicking on the Generate Report button, I get the following message:
    "<b>Currency translation cannot be carried out for element 20 (my calculated key figure). Element 20 neither contains a Basic key figure nor a variable with type Amount. For this reason, you cannot and do not need to perform a currency translation</b>."
    From the above message, I must be setting my calculated key figure incorrectly. 
    Any ideas?
    Thanks!
    Hau

    Hello Ajeet and N Ganesh,
    Thank-you for your help.  I verified that the dimensions of my key figure 'Material Source Plant Cost' was of type 0AMOUNT, so that was not the issue.
    The issue was in the error message that was returned when I pressed the Generate Report button in RSRT.  Essentially, currency conversions in BEX can only be performed on basic key figures or simple replacement path variables. 
    I can perform the currency translation on a SIMPLE calculated key figure that contains only the replacement path variable (where 'Material Source Plant Cost' is an attribute of my master data characteristic ZMAT_SRC).  However, I found that I cannot perform the currency translation on COMPLEX calculated key figures, like in my example above. 
    To get around this currency translation issue and as suggested by the error message, I created a SIMPLE calculated key figure for replacement path variable 'Material Source Plant Cost' and performed the currency translation.  The problem with this solution is that while I get my currency translation, I also get a calculated key figure that is aggregated, according to the query layout.
    To get around the aggregation issue, I also created a dummy counter as a master data attribute (of ZMAT_SRC) to capture the aggregation.  I assign a value of ‘1’ to this dummy counter/master data attribute in the update rules to my ZMAT_SRC infoobject.
    I then divide my new (aggregated) calculated key figure for 'Material Source Plant Cost' by the dummy counter (which is also aggregated).  Essentially, I divided the aggregated replacement path variable by the scaling factor.  The result is that I get a new calculated key figure that has been translated into the target currency and in the correct scaling factor.  I can use the new calculated key figures in the above formula; regardless of the report is rolled-up.
    Again, thanks for your help.  It gave me the pieces to solve this puzzle.

  • Currency Translation for Calculated Key figures

    Hello Friends I want to use the Currency Translation for Calculated Key figures.
    But when I go to Query and go to conversion tab it is always greyed out. Does that mean we can set the fixed conversion type for calculated key figures. like ZSAD Total debit - credit -flow value.
    What is the way to do fixed currency translation in query for calculated key figures.
    All the below is done now just want to specify this in query but I can'nt since it is greyed out.
    All the below is done
    I have created a Currency Translation Type " FiscperConversion" "ZVHGR" now this has Exchange Rate Type from Variable "ZVARN" (Which is a variable single value manual input on 0RTYPE Infoobject for exchange rate.)
    2. Now Currency Tab: Target Currency is selected from Variable placed in the Report. ZRPVAR.
    3. Now the Variable Time Reference is used. Standard Infoobject 0FISCPER
    which is beginning of period.

    Hi soniya
    Your calculated KF is result of some calculation ...so system will not allow u to do any translation on it...to get CT on CKF you should do it on base key figure...still if you wish to do then you can create a formula variable having processing type a customer exit...write code in cmod to rad exchange rate and multiply ur CKF by this formula variable....
    Thanks
    Tripple k

  • Currency translation for key figure in bex not working.

    Hi friends,
    i want to do currency translation for key figure(invoice value in local currency).
    i have followed the steps as under:
    1st Transferring Global Table Contents: Currencies from R/3 Systems
    2nd than transfer exchange rate - from r/3 to bi
    3 than In SPRO settings of BW there is option "consider translation ratios in translation"
    4th than used transaction RSCUR for creating currency translation type: parameter(exchange rate:m, soure currency fom data records, target currency ISK, time ref: current date)
    5th than in BEX query designer have sated this for key figure
    but when i run query in RSRT, curreny amount not getting convert?
    am i missing any step?
    pl. guide.
    thanks dushyant.

    Hi Dushyant,
    Are these steps followed in Query designer??
    In the Query designer, for that particular key figure property, under Conversion tab >> Currency Translation >> Conversion Type, select the currency translation type you created in RSCUR.
    And in the target currency, select accordingly.
    If you are going to use a variable, use the following link..
    http://help.sap.com/saphelp_nw04/helpdata/en/08/81b98b95e911d4b2ca0050da4c74dc/content.htm
    See also..
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/287bab90-0201-0010-f48e-cc55b0cd13d0
    Hope this helps..!
    -Pradnya
    Edited by: Pradnya Rane on Apr 8, 2009 7:58 AM

  • Currency Translation for Restricted Key figure

    We are in BI Content 351 and SP6. In the query, I create a restricted key figure for an amount KF, assign a currency translation using a conversion key and target currency, give a technical name and save. Everything is fine. However, when I drag the RKF to query column, the currency translation disappears. Has any one seen this before? Any pointers will be appreciated

    Hi Colleen,
    Did you first assign the Currency COnversion Key (box on left). Then the Target Currency box will be enabled.
    Hope this helps...

  • How to influence the text display of key figures in the interarctive DP

    Hello all,
    Does anyone know if there is a possibility (BADI, etc.) to change the text display of key figures (not characteristics!) in a planning book/data view?
    I know that you can define a free text in the data view but still, this is only one fixed text and it cannot be changed.
    Reason for the request: We would like to use the same key figure (and hence, indicate 2 different texts) for two different purposes (in different selections) without having to create a new data view.
    Kind regards,
    Klemens

    if you dont want a new data view and might even go to the extent of creating a user exit for this ... here is an idea
    - just create auxillary KF ( or use spare Temp KF depending on what you want to do with the data in the view) for each of these KF with the text
    lets say you have KF1 and KF2 - create KF1A and KF2A
    Make sure KF1A = KF1 and KF2a = KF2
    Now depending on user you can display KF 1 and KF2 or KF1a and KF2a depending on the user by using macros USER() and ROW_VISIBLE(0)

  • Can I run the currency translation for multiple years at the same time?

    Dear Friends,
    I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
    say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
    Can I run the currency translation for multiple years at the same time ?
    Note: The year is determined from the YEAR property of the "Time" dimension
    appreciate any inputs,
    thanks

    You can run currency translation for multiple years.
    I think the problem it is actually related to how you are sending the parameter to currency translation script.
    Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
    My expectation is that actually the script is called just with first year and that's the problem.
    Log of script logic you can find it into:
    C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
    Regards
    Sorin Radulescu

  • When do you go for non cumulative key figures?

    hi all,
    Can anyone explain the significance of non cumulative key figures. and when do we go for non cumulative key figures.
    Can anyone explain me with an example.
    thanxs in advance
    hari

    Hi,
    chk these threads:
    non cumulative key figures
    Cumulative and Non-cumulative Key Figures
    also,
    There is also an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
    Assign points if this helps!!
    Regards,
    Dhanya.

  • How To run Currency translation for Consolidation Application in BPC NW

    In "How To do Currency Translation for Financial Application in BPC 7 NW", the author mention that there is another "How To run Currency translation for Consolidation Application in BPC NW", anybody know where to get it?

    Hi...
    Check if the below links are useful to you.....
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6052a57b-8c64-2c10-b3a5-b0378ff21243&overridelayout=true
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0ea1fd8-d6d3-2a10-c1ab-e8164dd98316
    You can find all How-to docs in the below link
    http://wiki.sdn.sap.com/wiki/display/BPX/EnterprisePerformanceManagement%28EPM%29How-to+Guides

  • Creating variable for display attribute

    Hi
            I have a requirement where i have to give selection criteria for a display attribute. But how to create a variable for display attribute. Please help.
    Thanks
    Imran.

    If you are in BI 7.0 version. You have to put the navigational attribute in either characteristic restriction (Filter) or default values section and then you will get the restriction option. Once restricted you can put
    that char in where ever you want.
    Regards,
    Kams

  • Search for display attributes in Web reporting

    Hello,
    When I execute a query in Excel, in the variable entry screen, I can search values for material, for example, using some display attributes as Colour or Size. I mean, I want to execute the report for materials whose colour is white. I can open the matchcode for Material, I select the value "white" for the Colour display attribute, and I get a list of all the materials with that colour. The report is executed for those materials.
    However, when I execute the same report using Web reporting, I don't have the display attributes in the selection screen, to restrict the material. Once the report is executed, in the Navigational block, if I filter the material, there is an option called "Search for display attributes activated", where I can restrict per Colour, but only for one value.
    I have two questions related to this topic:
    1) Is it possible to have the functionality "Search for display attributes activated" in the variable entry screen, for Web reports, in the same way it is available in the reporting via Excel?
    2) Is it possible to configure that functionality, in order to restrict several values for the display attribute at the same time (in my example, for Colours "white", "black" and "red" at the same time)?
    Thanks very much for your help
    Patricia

    Hi Patricia,
    Looks like you have some new navigational attribute requirements, don't you think? I'm sure that would solve your issue, though maybe you're trying to avoid using navigational attributes (it is usually said that using navigational attributes is slower).
    Maybe you can do a test on BEx to check if your query is considerably slower when filtering directly by material code (by filtering on the selection screen using display attributes) or using a navigational attribute.
    Match codes on web reporting have lost some functionalities compared to BEx (such as importing a list of values from a file, for instance).
    Regards,
    David.

  • Display of Key Figure's Names in the Navigation Panel

    Hello all,
    Is anyone know how to display the key figure's names list in the navigation panel, as in that eLearning presentation –
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d049b14f-775c-2a10-9ea2-9d670feaf2fe
    (I'm talking about Net Sales, Sales Plan and      Deviation % on the left)
    I didn't know it is possible until I saw that link.
    Thanks!

    Hi Ron,
    I know, are passed 3 years to your post but I'm searching the same answer to your question, have you found it?
    Anyone can help me?
    Thanks a lot.

  • How to search in BI 7.1 query designer for the required key figures & chars

    Hi All,
         Can anyone plz tell me how to search in BI 7.1 query designer for the required key figures & characteristics. I have the query being built on a multiprovider which has many cubes.
    So, i have a huge list of key figures and characteristics. I am not able to search for the required one by the name or the technical name.
    How can we search and pick the required object from the enormous list of the Mutliprovider in the Bex Query Designer??
    Thanks
    Phani

    There is not a search feature available. You have to do an educated guess under what dimension your infoobject could be and select.

  • Expression for a cumulated key figures

    I would like to make an expression for a cumulated key figure (I set "cumulated" in properties of this KF) in Query Designer 3.5. If I try to make an expression, I'll get an expression for a key figure, and not for a cumulated key figure.
    Any ideas? Should I use query view?

    Hi,
    You may need to think about the Cell Editor concept here.
    In of the report I need to take 12 calmonth2 values in the columns starting from a financial year.Here the financial startd from APRIL.
    For each coolumn I need to show Average of sales value.Here Average means ,under APril month the value is April's sales value only.But for May ,I need to show like : (sales of April+ sales of May)/2.
    Similarly for June: (sales of April+ sales of May+sales of June)/3.
    So on ....
    Here I used the cell editor concept to get the required out put.
    I am take 12 selections in columns for 12 months .
    I have taken Sales value 2 times into Rows and hidden the first KF. But in the cell editor: for second row's second cell I have defined a formula like : (second row's First  cell+ First row's second  cell)/2
    Similarly for second row's thrid cell I have defined a formula like :(second row's First  cell+ First row's second  cell+ First row's third  cell)/3.
    so on..for other cells of Second row.
    With rgds,
    Anil Kumar Sharma .P

Maybe you are looking for