Fetch message in rfc 822 format

Hi,
I want to fetch message in RFC822 format.
is there any facility in java mail api where we can directly get the whole message in form of RFC822 format, rather then fetching different parts..like address, content,disposition and etc....
I think IMAP has a command fetchrfc822 to fetch the message in RFC822 format.
regards,
sumant

that will go to some output stream....how will I be able catch that one in some variable so that I can pass it to some other function.

Similar Messages

I receive a lot of attachments with RFC-822 format. How do I open thes?

Most of these RFC-822 attachments are asking which program would like to use to open. Most are from Google

RFC 822 is an MIME type created in 1982 and no longer in general use. See this Wikipedia article: http://en.wikipedia.org/wiki/List_of_RFCs
The Nimda worm is known to use that format to propagate itself without user intervention by copying email addresses from the user's address book. If you're receiving attachments but don't know the sender, then it could be an indication that their PC is infected by this virus. Even if you know the sender, it would be wise to check with them in order to determine whether they intentionally sent you an attachment or not.
More on the Nimda worm here: http://www.f-secure.com/v-descs/nimda.shtml<br><br>
For your own peace of mind, run a full system scan with your antivirus program. If you haven't got one, you can get Avast AV free from here: http://www.avast.com/free-antivirus-download (''I use this one myself'').
Also, download the free version of Malwarebytes as an added precaution: http://www.malwarebytes.org/products/malwarebytes_free
If this answers your question, please click the '''Solved it''' button next to this post after you log in into the forum. This will help others searching for a solution to the same thing.
Thanks.

RSS RFC-822 Date format

I've set up an rss feed using the example on
http://www.geekpedia.com/tutorial157_Create-an-RSS-feed-using-ASP.NET-2.0.html
However I use MS Access db and I would like to have the right
date format
which I belive is RFC-822.
I'm in Europe and currently my date output looks like this
<pubDate>18-06-2007 20:51:19</pubDate>
<asp:AccessDataSource ID="AccessDataSource1"
runat="server"
DataFile="d:\web\database\news.mdb"
DataSourceMode="DataReader" SelectCommand="SELECT storyDate,
Title,
Short, ArticleID FROM news ORDER BY storyDate DESC">
</asp:AccessDataSource>
Can anyone help me out with how I go by doing this?
Thanks
Bob

I don't recall but trust your saying you've determined JET
does not provide
native support for the RFC-822 format which you correctly
surmise is the
only format proven to be supported by the majority of
aggregators. Your
current date is non-compliant.
The best solution is to upsize to SQL Server which provides
native support
for RFC-822. Meanwhile, you do not need an RFC-822 compliant
data type per
se so use a text data type and build compliance using your
server-side code.
You also want to know about the Advisory Board website [1]
<%= Clinton Gallagher
NET csgallagher AT metromilwaukee.com
URL
http://clintongallagher.metromilwaukee.com/
[1]
http://www.rssboard.org/rss-specification
"Bob" <[email protected]> wrote in message
news:f588ej$3i3$[email protected]..
> I've set up an rss feed using the example on
>
http://www.geekpedia.com/tutorial157_Create-an-RSS-feed-using-ASP.NET-2.0.html
>
> However I use MS Access db and I would like to have the
right date format
> which I belive is RFC-822.
>
> I'm in Europe and currently my date output looks like
this
> <pubDate>18-06-2007 20:51:19</pubDate>
>
> <asp:AccessDataSource ID="AccessDataSource1"
runat="server"
> DataFile="d:\web\database\news.mdb"
> DataSourceMode="DataReader" SelectCommand="SELECT
storyDate,
> Title,
> Short, ArticleID FROM news ORDER BY storyDate DESC">
> </asp:AccessDataSource>
>
> Can anyone help me out with how I go by doing this?
>
> Thanks
> Bob
>
>
>
>

How do I open attached pictures that are RFC-822 or end with a .eml?

The attachment is RFC-822 data and ends with .eml
I cannot open it...here is the top portion of the email it came with.
Received: from 209.86.226.40 by webmail.peoplepc.com with HTTP; Tue, 9 Aug 2011 23:08:15 -0400
Message-ID: <[email protected]k.net>
Date: Tue, 9 Aug 2011 20:08:15 -0700 (GMT-07:00)
From: mary and dave <[email protected]>
Reply-To: mary and dave <[email protected]>
To: carol walters <[email protected]>
Subject: mary
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
X-Mailer: EarthLink Zoo Mail 1.0

Save the '''.eml''' Files and Open them in Firefox using the following method:
-> Tap ALT key or press F10 to show the Menu bar
-> go to File Menu -> click '''Open File...''' -> select a '''.eml''' file and hit Enter
Check and tell if its working.

Why can I no longer text message on the larger format by turning my phone?

Why can I no longer text message on the larger format by turning my phone on its side?

Hi,
Since iChat 6 the SMS option in the Menus has disappeared.
However if you add the number to a Buddy List as if it were Screen Name but with the leading +1 (as in +1234567890) it will work over AIM.
It only works to US phones on some Carriers.
9:44 pm Wednesday; January 8, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Error in Local Message System: RFC destination MB3AP1039 does not exist.

Error in Local Message System: RFC destination MB3AP1039 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam creating a message from any system from HELP-CREATE SUPPORT MESSAGE it is throwing the above error message. Actually i need to send this message to SAP solution Manager Service Desk.
Can anyone help me in resolving the above issue.
Thanks & Regards,
Mirza Kaleemulla Baig.

Dear friend
You have to of following option
1.Define Service Desk destination in the R/3 systems:
Note: for this you need to log in the R/3 system.
Create the RFC between the Solution manager and R/3 system (Login to the R/3 system)
2.a. Go to transaction SM30.
b. In table/view field, enter BCOS_CUST. Then press the Maintain Button. See example below:
c. Press the Continue button in the following screen:
d. You should see the following screen, no entries should be seen in the table. Press the New Entries button:
e. In the next screen, enter the following information:
In the RFC Destination you should point to your Solution Manager destination RFC.
0ss_msg w sm_bsmclnt_back cust620 1.0
shailesh

When connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?"

when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please

Hi Michael
These are the answers
to your questions
What is the OS version, Windows Server 2008?
Microsoft Windows [Version 6.0.6001]
SP1
On which disk you choose to install it, the C: drive?
I have Raid 5
What
is the output of the Checkdsk?   It find Nothing
Could
you please upload us a screen shot? I have no
Screen shot
Is
the C: drive is a external drive? NO
Besides,
have you manually assigned the drive letter?
NO
Thanks

Error in Local Message System: RFC destination 10.189.98.10 does not exist.

Error in Local Message System: RFC destination 10.189.98.10 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam going inside the tcode SM30 in the satellite system and entering the destination ip of solution manager system and after that when iam creating a message from HELP-CREATE SUPPORT MESSAGE, then it is throwing the following error.
Can anyone please help me in the above issue.
Regards,
Mirza Kaleemulla Baig.

Hi Mirza,
For the RFC destination don't enter the IP address,enter the RFC name,somthing like SM_SP1CLNT200_BACK which is maintained in sm59.
Revert for any clarifications.
Thanks and Regards,
Avinash.

Reg: Proxy error while fetching data from RFC's

Hi All,
I am fetching data from RFC's. When the data is in bulk I am getting an error like:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request POST /webdynpro/dispatcher/sap.com/pb/PageBuilder.
Reason: Error reading from remote server
When the data is samll only I am not getting any error and am able to fetch it easily. Please suggest me something in this regard.
Thanks in advance,
Gaurav

Hi Detlef / Gowtham,
Now I am able to fetch data from flat files from OWB Server as well as OWB Client.
One way I have achieved as suggested by you
1) Creating location on the OWB Client
2) Samples the files at client
3) Created & Configured external table
4) Copy all flat files on OWB Server
5) Updated the location which I created at the client.
Other way
1) Creating location on the OWB Client
2) Samples the files at client
3) Created & Configured external table
4) Copied flat files on the sever in same drive & directory . like if my all flat files are on C:\data at OWB Client then I copied flat file C:\data on the OWB Server. But this is feasible for Non-Windows.
Hence my problem solved.
Thanks a lot.
Regards,
Manmohan

Sometimes TB can't fetch messages

For some time now, TB has sometimes been stopping receiving messages. This happens apparently randomly, like this morning. I was away from the keyboard for half an hour, came back and it had happened again. Suddenly TB was unable to connect with the mail server. I have spent a lot of the time on the phone with my ISP, and the account settings seem to be correct.
I also get messages on my phone, which normally uses the wi-fi when it's at home. When TB is unable to get messages, the phone is also unable to. However, if I switch off the phone's wi-fi, so that it uses 3G, then it can pickup messages. When my PC has this problem, I have to switch it off then on again to fix it. Re-starting Windows doesn't necessarily work. But through all this my browser still works.
So I'm thinking - firewall? I use ADSL and a Belkin router, which is wired to my PC. I tried re-starting the router from its setup menu, but it made no apparent difference. Except today, some time after I restarted the router, TB started fetching messages again. And by the way, when TB can't pickup messages, it can send them.
What can you suggest? What is going on?

is the error can fin server or can't access server. It may well be your provider has dodgy DNS servers (Mine does) I set the routers DNS to use Googles DNS servers.
But still I have issues. Particularly with the iPad. I think it is actually the Netgear router loosing the plot. Simply turning it off and on often does more to fix things than anything else.

How to fetch message comments using JMA API?

Hi All,
From telnet <host> 143, and tring get comments associated with a message works well as shown below.
2 fetch 8 COMMENT ("/message/vendor/ms/follow-up-flag-status" ("value.shared"))
* 8 FETCH (COMMENT ("/message/vendor/ms/follow-up-flag-status" ("value.shared" "completed")))
How to fetch the same details using Java Mail API. I couldn't get any of these flags when added to FetchProfile before fetching. The last option is using IMAPFolder.ProtocolCommand.
Please suggest if there is a better way to fetch message meta data as "comment" using JMA
Regards,
Venkat

I don't know what JMA is. I assume you meant JavaMail.
Sorry, there's no direct support for fetching that data.
You might be able to get this to work using IMAPFolder.ProtocolCommand.

SOAP Runtime: Exception message: Unallowed RFC-XML Tag (SOAP_EINVALDOC)

Hi,
Curretly I am trying to test a Webservice on ECC 5.0, Oracle, Windows.
Below is the error that I am facing.
SOAP Runtime: SOAP Runtime exception: 111 occurred in method XP_READ_TAG of class CL_SOAP_XP at position 1
SOAP Runtime: Exception message: Unallowed RFC-XML Tag (SOAP_EINVALDOC)
In dev_rfc0:
ERROR 03:20:57: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->HANDLE
STATUSCODE() Received return code 404 ( Not found )
ERROR 03:20:57: SOAP Message CL_SOAP_MESSAGE->IF_SOAP_MESSAGE
PART~INITFOR_DESERIALIZE() A SOAP Runtime Core Exception
occurred in method XP_READ_TAG of class CL_SOAP_XP at position id
1 with internal error id 111 and error text Unallowed RFC-XML Tag
(SOAP_EINVALDOC) (fault location is 1 ).
I have looked up on sdn, and also looked at note 919886.
I have read several posts regarding creation of RFC Destination in sm59 of Type G, to get over this issue.
But RFC Destination of type G is not available in ECC 5.0
Is the error because of incorrect URL mentioned in logical port,
I am unable to ping the host name mentioned in URL, looks like that machine is not in the network.
does it mean the wsdl is not located at that particular host.
Any suggestions would be greatly appreciated.
Regards,
Vishnu.

Hi Anton,
The complete error message in dev_rfc0:
INFO 02:15:12: SOAP Transport Binding CL_SOAP_HTTP_TPBND_ROOT
->IF_SOAP_TRANSPORT_BINDING~SEND() Try to send message ( DEST =
,PATH = ,URL = http://hostname:portno/ ,SOAP Action =
"ROI_R3_DF.roiSAPCreateOrder" )
INFO 02:15:12: SOAP Transport Binding CL_SOAP_HTTP_TPBND_ROOT
->IF_SOAP_TRANSPORT_BINDING~SEND() Message sent
INFO 02:15:12: SOAP Transport binding CL_SOAP_HTTP_TPBND_ROOT
->IF_SOAP_TRANSPORT_BINDING~RECEIVE() Try to receive message
ERROR 02:15:12: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->HANDLE
STATUSCODE() Received return code 404 ( Not found )
ERROR 02:15:12: SOAP Message CL_SOAP_MESSAGE->IF_SOAP_MESSAGE
PART~INITFOR_DESERIALIZE() A SOAP Runtime Core Exception
occurred in method XP_READ_TAG of class CL_SOAP_XP at position id
1 with internal error id 111 and error text Unallowed RFC-XML Tag
(SOAP_EINVALDOC) (fault location is 1 ).
After reading your post about the return code 404, I am in a dilemma whether, services in icman are unavailable or
the services at the location of the wsdl in the other server.
If you could clarify, it would be great.
Thanks a lot.
Vishnu.

No message for validation error "format", type "date", field "date-expired"

Dear
Guys,
i am getting the following error : ((No message for validation error "format", type "date", field "date-expired"))
When trying to upload adobe connect 7 license to the adobe connect 7 configuration wizard. the problem occurs because my server was install on Arabic Saudi Arabia date format while installation, but if i change the windows date format to US then the problem still occurs, and formatting windows is not possible, could anybody help??
Regards

Thank you for replying,
No i am not on host mode, a have installed it deferent times ago successfully, but the only problem now is that during the installation windows server 2008 the default language, time and date. Was set Arabic Saudi Arabia. And even changing it does not solve the problem, as i mentioned above.

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
Kris

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

Mail for Exchange with error "Body Fetch Message T...

Hi,
I am just got the Nokia E71, and had installed the Mail for Exchange version 2.0.5(5), and had set all the required configuration (Exchange Server Name, UserName, Passowrd, Domain). But when I do the SYNC, it got the "System Error" from the log, and I check on the "admin_log1.txt", it show that "Body Fetch Message Too Large" error.
Any ideal on the error ? I have check the Access Point, there is working fine, as I can us the web browser on the phone, and no proxy setting
I also check all the Exchange configuration setting with using the Windows Mobile PDA phone to do the SYNC with our company Exchange server, it work fine with all the given configuration.
Please help.
Thank You very Much.

Is Mail for exchange working after the update? I am able to setup my company email, but mails are not getting downloaded. I tried entering a wrong password for my company email (after deleting my profile), just to check if mfe is able to connect properly with my company email server. It is able to identify that the email password i entered was incorrect. Also when I enter the correct password, setup finishes successfully. But its not retrieving any emails. I am sure of the settings, since the same settings were working earlier. Only thing i am doubtful about is the port number. Port number by default comes as 443. Does it need to change? Is MFE working for anyone? My company email is ************@hcl.com. Can you pls suggest?

Fetch message in rfc 822 format

Similar Messages

Maybe you are looking for