Fetching Service URL based on System
Hi All,
We developed UI5 app in development system (for ex: PGX). So we used service URLs pointing to PGX system. But later we transported the app to another system (for ex: PGQ) for testing. But still the app refers to PGX data as we used absolute URLs. So, is it possible to get the URLs dynamically based on the system?
Thanks & Regards,
Seshu
Hi
Yes, we should use relative URLs . But How it will fetch the data using relative URL. We should provide entire path to get the data, shouldn't we? . Is there any code to get the server host and port number based on system?
Thanks
Seshu
Similar Messages
-
How to fetch service order with partucular system status and user status
Hello All,
How to fetch service orders with specific system status and user status.
thanksI want tables or views from where I can fetch service orders. I have to design ALV report based on this.
I want to fetch released service orders with status INIT and RENT.
Here, SYSTEM Status = Released and
USER Status = INIT
RENT
So is there any function module available for the same..... -
"invalid web service URL" error for create web service system
Hi.
I want to call web service in visual composer and try to create Web Service definition.
When I push create button in visual composer, I got "invalid web service URL" error.
My web service is located in SAP ABAP System and I can check WSDL URL in web service homepage.
(http://mycompany.com:8000/sap/bc/srt/rfc/sap/ZTEST?sap-client=500&wsdl=1.1)
Any ideas for this error ?
Regards, Arnold.Hi
Please can you create the web service in the portal as a portal system, this will work and you will be able to see the service in Visual Composer.
Jarrod Williams -
Provide Webservice link not generating corresponding WSDL URL based on the service operation.
Hi All,
The provide webservice link is not generating corresponding WSDL URL based on Service Operation.
E.g. Currently we have two service operations namely Create and Update. We are using Rowset based messaging. Provide Webservice link generated correct WSDL URL for the create operation but it is providing the same URL for Update operation as well. kindly share your knowledge if you guys ever faced similar problem.
Regards
ViswaHi Hakan,
Thanks for your reply. Actually i am trying to generate WSDL URLs for each service operation for Travel & Expense module like create expense, update expense etc.
URL generated looks like this : http://xxx.xx.xxx.xx:8011/PSIGW/PeopleSoftServiceListeningConnector/HX_TE_EXPENSE_CLAIM.16.wsdl - this url is meant for CREATE operation. But for the UPDATE operation i am getting the same URL . Normally, Whenever i create WSDL URL for different operation the numeric part of the above URL changes like 16, 17 etc ..based on the service operation but no two operation have same URL like i am getting now. Please provide your knowledge on this issue.
Regards
Viswa -
I'm using a .Net based web service to fetch data. The exported XCelsius will be deployed on the customer's environment along with the web service. In that case, the SWF file should connect to web service deployed on my customer site. But, it looks for the hard coded path of the web service. In XCelsius designer, there is no option to pick the web service URL from a cell, as available in the "XML data" button. Is there any other way to pass on the Web Service URL dynamically to the SWF file. Please note, I may use more that one web service connectors in my SWF file.
With regards to the Web Service Connector in CX, you can dynamically set the URL/end point path of the Web Service if you have installed the latest hotfix of CX:
http://support.businessobjects.com/communityCS/FilesAndUpdates/crystal_xcelsius_4.5_hotfix.zip.asp
After, you will see in the properties of the Web Service Connector by tying it to a cell in the speadsheet. -
Urgent :Fetch Portal URL in WebDynpro code
Hi techgurus,
I want to fetch portal URL/ Portal system ID in my webdynpro code?
Please help!
Regards,
AbhishekThis is an approach we have implemented:
Login to Visual Administrator.
Go to Services > Destinations
Create HTTP Destinations for the URLs to be accessed.
Write a method containing the below code to access the same URL:
InitialContext ctx;
Object obj;
DestinationService dstService;
Destination destination;
HTTPDestination httpDestination ;
HttpURLConnection httpurlconnection = null;
Properties destprop = null;
String username = "";
String password = "";
try
ctx = new InitialContext();
obj = ctx.lookup(DestinationService.JNDI_KEY);
dstService = (DestinationService) obj;
List destinationList = new ArrayList();
destinationList = dstService.getDestinationTypes();
destination = dstService.getDestination("HTTP",<name of the HTTP url>);
destprop = destination.getDestinationProperties();
httpDestination = (HTTPDestination) destination;
url = httpDestination.getUrl();
catch(Exception ex)
wdComponentAPI.getMessageManager().reportException("Unable to get the Webservice URL "+ex.getMessage(),true);
ex.printStackTrace();
Hope this solves your problem. -
URL based Iview creation problem
Hello,
We use EP6 SP9.
I am trying to build a url based iview with "capture" option.
When I enter the url address and hit "capture" I get the following error:
Unable to fetch site http://portal.Error # 401
Thanks for any helpHi Tuval,
Yes I remember you from the Toptier days, hope life is treating you well.
Actually the Proxy settings could still be a problem for internal urls if infact you still have a proxy on your network. You would need to specify the bypass proxy domain settings in the http service just like you do in your browser. Except you use | as a delimeter eg. .sap.com|.sap.corp.
As I suggested you should still check that server side urls are working either internally or externally by typing a url into the 'server side connection test' in the Theme integrity tests page.
If this test passes and you cannot capture then its a capture problem either domain related or something else eg a timeout.
If this test fails then the capture will not work until server side requests can succeed.
Also, the capture service has some parameters as well but I have never changed the defaults. -
URL based portlet from external application
Hello,
I'm trying to integrate a forms 6i patch 10 application into SSO.
First, I created an external application, passing it the correct parameters.
Everything went ok, and I can successfully call it by entering
"Administer Enternal Application" link on Oracle Portal.
Now I want to make a portlet from this external application. For that I'm
using PDK URL Services. So I reused the urlexternalauth provider which is
included in the latest PDK. The provider.xml is included below. I successfully
registered the provider, by following the wizard "Register Portlet Provider" on
Oracle Portal. But when I call the portlet, the html startup file for the form
is base.htm. When I call the external application through the "Administer Enternal Application" link,
I get the right html startup file, which is basejini.htm.
So I need basejini.htm called from the portlet, and not base.htm.
Thanks,
Andri.
provider.xml
<?xml version="1.0" encoding="UTF-8"?>
<?providerDefinition version="3.1"?>
<provider class="oracle.portal.provider.v2.http.URLProviderDefinition">
<providerInstanceClass>oracle.portal.provider.v2.http.URLProviderInstance</providerInstanceClass>
<session>true</session>
<authentication class="oracle.portal.provider.v2.security.Authentication">
<authType>ExternalApp</authType>
<userFieldName>username</userFieldName>
<userPwdName>password</userPwdName>
<errorPageMessages>Error Message!</errorPageMessages>
</authentication>
<proxyInfo class="oracle.portal.provider.v2.ProxyInformation">
<httpProxyHost>proxy.br.odebrecht.com</httpProxyHost>
<httpProxyPort>8080</httpProxyPort>
</proxyInfo>
<portlet class="oracle.portal.provider.v2.http.URLPortletDefinition">
<id>1</id>
<name>iCorporate</name>
<title>iCorporate</title>
<description>iCorporate - aplicacao Forms6i</description>
<timeout>100</timeout>
<timeoutMessage>iCorporate time out</timeoutMessage>
<acceptContentType>text/html</acceptContentType>
<showEdit>false</showEdit>
<showEditToPublic>false</showEditToPublic>
<showEditDefault>false</showEditDefault>
<showPreview>false</showPreview>
<showDetails>false</showDetails>
<hasHelp>false</hasHelp>
<hasAbout>false</hasAbout>
<passAllUrlParams>true</passAllUrlParams>
<inputParameter class="oracle.portal.provider.v2.URLPortletParameter">
<name>config</name>
<displayName>config</displayName>
<value>icorp</value>
<isMandatory>true</isMandatory>
</inputParameter>
<inputParameter class="oracle.portal.provider.v2.URLPortletParameter">
<name>database</name>
<displayName>database</displayName>
<value>server1</value>
<isMandatory>true</isMandatory>
</inputParameter>
<renderer class="oracle.portal.provider.v2.render.RenderManager">
<showPage class="oracle.portal.provider.v2.render.http.URLRenderer">
<contentType>text/html</contentType>
<pageUrl>http://server1.rjo.br.odebrecht.com:7780/servlet/f60servlet</pageUrl>
</showPage>
</renderer>
<securityManager class="oracle.portal.provider.v2.security.URLSecurityManager">
<authorizType>public</authorizType>
</securityManager>
</portlet>
</provider>Andrea,
Could you tell me if FORMS 6i authentication process is based on cookies? The reason being, URL based portlets SSO feature is primarily driven by External Application's cookies, which act as authentication tokens. Once a valid user information is submitted to the External Application, cookies (if any) are received and stored so that they can be re-used in further connections. A typical flow of events can be summarized as follows :
At provider level :
1. Connect to External Application.
2. Submit user information to url specified by External Application's login URL.
3. Fetch cookies
4. Store them for future use.
At portlet level :
1. Read cookies fetched through provider, pertaining to this portlet.
2. Open connection to url specified by <pageUrl> tag in provider.xml
3. Read content and display in the portlet.
From the provider.xml, I can see that we are trying to show content given by http://venezuela.rjo.br.odebrecht.com:7780/servlet/f60servlet servlet, which has two parameters called {config and database}. This makes the resulting URL as http://venezuela.rjo.br.odebrecht.com:7780/servlet/f60servlet?config=icorp&database=venezula. I guess when this URL is accessed directly, FORMS servlet will redirect the user to base.htm file. Important point to note here is that when URL based portlet makes connection to the above URL, user information is not directly sent along with the request. Instead, cookies fetched from External Application, if any, are sent. But when the same application is viewed through portal's External Application, user information is directly submitted to the login URL. So, before deciding on something, it is important to know how different is the loginURL specified through portal's External Application details, from <pageUrl> of URL based portlets?
-aMJAD. -
Service for network file system fails to install
Installation of the File Service and Service for NFS in Windows 2008 R2 server fails. Following are the steps used to perform the install.
Open Server Manager from Start> All Programs> Administrative Tools> Server Manager.
Click on the Roles node in the left pane, and then click the
Add Roles link.
On the Add Roles Wizard welcome page, click Next to continue.
From the list of roles to install, select File Services, and click
Next to continue.
On the Introduction to File Services page, click Next to continue.
On the Select Role Services page, keep the File Server box checked and select
Services for Network File System. Click Next to continue.
On the Confirmation page, review the settings and click the Install button.
Click Close when the wizard completes.
ServerManager Log:
From the ServerManager.log file under C:/Windows/Logs I can see the below.
2272: 2013-02-12 16:13:51.479 [CBS] IsCacheStillGood: True.
2272: 2013-02-12 16:14:05.534 [Provider] System changed since last refresh: False
2272: 2013-02-12 16:15:45.816 [InstallationProgressPage] Loading progress page...
2272: 2013-02-12 16:15:45.831 [InstallationProgressPage] Begining Sync operation...
2272: 2013-02-12 16:15:45.842 [Sync]
Sync Graph of changed nodes
==========
name : File Services
state : Changed
rank : 1
sync tech: CBS
guest[1] : File Server
guest[2] : Distributed File System
guest[3] : File Server Resource Manager
guest[4] : Services for Network File System
guest[5] : Single Instance Storage
guest[6] : Windows Search Service
guest[7] : Windows Server 2003 File Services
guest[8] : BranchCache for network files
provider : FileServerRoleProvider
name : Services for Network File System
state : Changed
rank : 2
sync tech: CBS
provider : FileServerRoleProvider
name : File Server
state : Changed
rank : 2
sync tech: CBS
provider : FileServerRoleProvider
2272: 2013-02-12 16:15:45.842 [Sync] Calling sync provider of Services for Network File System ...
2272: 2013-02-12 16:15:45.843 [FileServer] Sync:: guest: 'Services for Network File System', guest deleted?: False
2272: 2013-02-12 16:15:45.843 [FileServer] Begin installation of 'Services for Network File System'...
2272: 2013-02-12 16:15:45.843 [FileServer] Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
2272: 2013-02-12 16:15:45.843 [FileServer] Installation queued for 'Services for Network File System'.
2272: 2013-02-12 16:15:45.843 [Sync] Calling sync provider of File Server ...
2272: 2013-02-12 16:15:45.843 [FileServer] Sync:: guest: 'File Server', guest deleted?: False
2272: 2013-02-12 16:15:45.843 [FileServer] Begin installation of 'File Server'...
2272: 2013-02-12 16:15:45.843 [FileServer] Install: Guest: 'File Server', updateElement: 'CoreFileServer'
2272: 2013-02-12 16:15:45.843 [FileServer] Installation queued for 'File Server'.
2272: 2013-02-12 16:15:45.844 [CBS] installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure
NFS-Administration ServerForNFS-Infrastructure CoreFileServer ' ...
2272: 2013-02-12 16:15:46.315 [CBS] ...parents that will be auto-installed: '<none>'
2272: 2013-02-12 16:15:46.316 [CBS] ...default children to turn-off: '<none>'
2272: 2013-02-12 16:15:46.325 [CBS] ...current state of 'ServicesForNFS-ServerAndClient': p:
Staged, a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.325 [CBS] ...setting state of 'ServicesForNFS-ServerAndClient' to
'InstallRequested'
2272: 2013-02-12 16:15:46.335 [CBS] ...current state of 'ClientForNFS-Infrastructure': p: Staged,
a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.336 [CBS] ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
2272: 2013-02-12 16:15:46.345 [CBS] ...current state of 'NFS-Administration': p: Staged, a:
Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.345 [CBS] ...setting state of 'NFS-Administration' to 'InstallRequested'
2272: 2013-02-12 16:15:46.354 [CBS] ...current state of 'ServerForNFS-Infrastructure': p: Staged,
a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.354 [CBS] ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
2272: 2013-02-12 16:15:46.363 [CBS] ...current state of 'CoreFileServer': p: Staged, a: Staged,
s: UninstallRequested
2272: 2013-02-12 16:15:46.363 [CBS] ...setting state of 'CoreFileServer' to 'InstallRequested'
2272: 2013-02-12 16:15:46.373 [CBS] ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
2272: 2013-02-12 16:15:46.390 [CBS] ...'ClientForNFS-Infrastructure' : applicability: Applicable
2272: 2013-02-12 16:15:46.408 [CBS] ...'NFS-Administration' : applicability: Applicable
2272: 2013-02-12 16:15:46.426 [CBS] ...'ServerForNFS-Infrastructure' : applicability: Applicable
2272: 2013-02-12 16:15:46.435 [CBS] ...'CoreFileServer' : applicability: Applicable
2272: 2013-02-12 16:15:46.493 [CbsUIHandler] Initiate:
2272: 2013-02-12 16:15:46.494 [InstallationProgressPage] Installing...
2272: 2013-02-12 16:15:51.958 [CbsUIHandler] Error: -2147021879 :
2272: 2013-02-12 16:15:51.958 [CbsUIHandler] Terminate:
2272: 2013-02-12 16:15:52.035 [InstallationProgressPage] Verifying installation...
2272: 2013-02-12 16:15:52.049 [CBS] ...done installing 'ServicesForNFS-ServerAndClient
ClientForNFS-Infrastructure NFS-Administration ServerForNFS-Infrastructure CoreFileServer '.
Status: -2147021879 (80070bc9)
2272: 2013-02-12 16:15:52.052 [FileServer] Skipped configuration of 'Services for Network File System' because install operation failed.
2272: 2013-02-12 16:15:52.053 [FileServer] Skipped configuration of 'File Server' because install operation failed.
2272: 2013-02-12 16:15:52.053 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
'Services for Network File System',
'File Server'[STAT] installation(s) took '6.2058637' second(s) total.
[STAT] Configuration(s) took '0.0002143' second(s) total.
[STAT] Total time: '6.206078' second(s).
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
is required to roll back changes made
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 255
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
is required to roll back changes made
2272: 2013-02-12 16:15:52.054 [InstallationProgressPage] Sync operation completed
2272: 2013-02-12 16:15:52.054 [InstallationProgressPage] Performing post install/uninstall discovery...
2272: 2013-02-12 16:15:52.056 [Provider] C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
2272: 2013-02-12 16:15:52.056 [CBS] IsCacheStillGood: False.
2272: 2013-02-12 16:15:52.526 [CBS] >>>GetUpdateInfo--------------------------------------------------
2272: 2013-02-12 16:15:59.342 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed:
80070bc9 (-2147021879)
2272: 2013-02-12 16:15:59.342 [CBS] <<<GetUpdateInfo--------------------------------------------------
2272: 2013-02-12 16:15:59.380 [DISCOVERY] hr: -2147021879 -> reboot required.
2272: 2013-02-12 16:15:59.390 [InstallationProgressPage] About to load finish page...
2272: 2013-02-12 16:15:59.390 [InstallationFinishPage] Loading finish page
2272: 2013-02-12 16:15:59.401 [InstallationFinishPage] Finish page loaded
In Windows Event long I can see the following events logged:
Event 3002, Port Map:
Windows(R) failed a request to register RPC Port Mapper on TCP port 111. RPC Port Mapper cannot start.
Network File System (NFS) clients use RPC Port Mapper (also known as Portmap and Rpcbind) to discover NFS protocols on remote servers. Without RPC Port Mapper, Server for NFS
cannot start and NFS clients cannot access files on this server.
Verify that no other software is registered on TCP port 111, then start Server for NFS manually (which will also start RPC Port Mapper).
Event 7000, Service Control Manager:
The Server for NFS Open RPC (ONCRPC) Portmapper service failed to start due to the following error:
A device attached to the system is not functioning.
Event 7001, Service Control Manager:
The Server for NFS Driver service depends on the Server for NFS Open RPC (ONCRPC) Portmapper service which failed to start because of the following error:
A device attached to the system is not functioning.
Event 7001, Service Control Manager:
The Server for NFS service depends on the Server for NFS Driver service which failed to start because of the following error:
The dependency service or group failed to start.
Based on a technet forum I have already checked and made sure there is no other service running on port 111 (command used is netstat -a -b -o).
Dependent Service Status:
During the installation process “Client for NFS” seems to have gone well and the service started successfully. But the “Server for NFS” failed, when checked for the status of the dependent process “portmap” service failed to start with the WIN32_EXIT_CODE
“31 (0x1f)”. Please find below the query result.
C:\Users\CMMAdmin>sc query rpcxdr
SERVICE_NAME: rpcxdr
TYPE : 1 KERNEL_DRIVER
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\Users\CMMAdmin>sc query msnfsflt
SERVICE_NAME: msnfsflt
TYPE : 2 FILE_SYSTEM_DRIVER
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\Users\CMMAdmin>sc query portmap
SERVICE_NAME: portmap
TYPE : 1 KERNEL_DRIVER
STATE : 1 STOPPED
WIN32_EXIT_CODE : 31 (0x1f)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\Users\CMMAdmin>
As the EXIT CODE is 31 ( A device attached to the system is not functioning), I have checked device manager and made sure there is no yellow warning shown against any hardware device. Further I am not sure how to proceed and debug this issue.
Please let me know if you have any suggestion on how debug this issue further.
Thanks
-PoopeshHey,
I had this same problem running MS Server 2008 R2 and server log is as follow:
name : Services for Network File System
state : Changed
rank : 2
sync tech: CBS
ant. : empty
pred. : File Services
provider : FileServerRoleProvider
5676: 2014-01-14 14:08:57.474 [Sync] Calling sync provider of Services for Network File System ...
5676: 2014-01-14 14:08:57.521 [FileServer] Sync:: guest: 'Services for Network File System', guest deleted?: False
5676: 2014-01-14 14:08:57.536 [FileServer] Begin installation of 'Services for Network File System'...
5676: 2014-01-14 14:08:57.536 [FileServer] Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
5676: 2014-01-14 14:08:57.536 [FileServer] Installation queued for 'Services for Network File System'.
5676: 2014-01-14 14:08:57.536 [CBS] installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
ServerForNFS-Infrastructure ' ...
5676: 2014-01-14 14:09:00.173 [CBS] ...parents that will be auto-installed: '<none>'
5676: 2014-01-14 14:09:00.173 [CBS] ...default children to turn-off: '<none>'
5676: 2014-01-14 14:09:00.204 [CBS] ...current state of 'ServicesForNFS-ServerAndClient': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.204 [CBS] ...setting state of 'ServicesForNFS-ServerAndClient' to 'InstallRequested'
5676: 2014-01-14 14:09:00.235 [CBS] ...current state of 'ClientForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.235 [CBS] ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
5676: 2014-01-14 14:09:00.266 [CBS] ...current state of 'NFS-Administration': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.266 [CBS] ...setting state of 'NFS-Administration' to 'InstallRequested'
5676: 2014-01-14 14:09:00.282 [CBS] ...current state of 'ServerForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.282 [CBS] ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
5676: 2014-01-14 14:09:00.313 [CBS] ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
5676: 2014-01-14 14:09:00.360 [CBS] ...'ClientForNFS-Infrastructure' : applicability: Applicable
5676: 2014-01-14 14:09:00.422 [CBS] ...'NFS-Administration' : applicability: Applicable
5676: 2014-01-14 14:09:00.469 [CBS] ...'ServerForNFS-Infrastructure' : applicability: Applicable
5676: 2014-01-14 14:09:01.624 [CbsUIHandler] Initiate:
5676: 2014-01-14 14:09:01.624 [InstallationProgressPage] Installing...
5676: 2014-01-14 14:09:35.117 [CbsUIHandler] Error: -2147021879 :
5676: 2014-01-14 14:09:35.117 [CbsUIHandler] Terminate:
5676: 2014-01-14 14:09:41.170 [InstallationProgressPage] Verifying installation...
5676: 2014-01-14 14:09:41.264 [CBS] ...done installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
ServerForNFS-Infrastructure '. Status: -2147021879 (80070bc9)
5676: 2014-01-14 14:09:41.279 [FileServer] Skipped configuration of 'Services for Network File System' because install operation failed.
5676: 2014-01-14 14:09:41.279 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
'Services for Network File System'[STAT] installation(s) took '43.7368586' second(s) total.
[STAT] Configuration(s) took '0.0062843' second(s) total.
[STAT] Total time: '43.7431429' second(s).
5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
made
5676: 2014-01-14 14:09:41.279 [InstallationProgressPage] Sync operation completed
5676: 2014-01-14 14:09:41.279 [InstallationProgressPage] Performing post install/uninstall discovery...
5676: 2014-01-14 14:09:41.295 [Provider] C:\windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
5676: 2014-01-14 14:09:41.295 [CBS] IsCacheStillGood: False.
5676: 2014-01-14 14:09:43.900 [CBS] >>>GetUpdateInfo--------------------------------------------------
5676: 2014-01-14 14:09:57.394 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
5676: 2014-01-14 14:09:57.410 [CBS] <<<GetUpdateInfo--------------------------------------------------
5676: 2014-01-14 14:09:57.488 [DISCOVERY] hr: -2147021879 -> reboot required.
5676: 2014-01-14 14:09:57.613 [InstallationProgressPage] About to load finish page...
5676: 2014-01-14 14:09:57.628 [InstallationFinishPage] Loading finish page
5676: 2014-01-14 14:09:57.644 [InstallationFinishPage] Finish page loaded
My solution was to run netstat -ano to identify what process was running on port TCP/UDP :111, then with the command tasklist I got PID matching with the task name. Once identified I stopped the process, rebooted and installed
the NFS service. On top of that, before installing NFS services I disabled firewall and antivirus. It worked fine for me. I hope this will be usefull for you. By the way, don't forget to enable all process back!
Have a good one! -
Issue in Consuming Rest/JSON Service from Netweaver gateway system
Hello Experts,
We are trying to consume the Rest/JSON web service from NetWeaver Gateway System.
But we are getting HTTP Communication failure error.
URL: 'http://sgpvmc0031.apac.bosch.com/ActivityManager2/rest/v1/query/employees/amh1sgp/workItems/pending'
The Host system of Serve is a Non-SAP System.
In web browser, it ask for user id and password, by passing them, it provide the response.
Please find my code details.
DATA: lo_http_client TYPE REF TO if_http_client,
lv_service TYPE string,
lv_result TYPE string,
lo_ixml TYPE REF TO if_ixml,
lo_streamfactory TYPE REF TO if_ixml_stream_factory,
lo_istream TYPE REF TO if_ixml_istream,
lo_document TYPE REF TO if_ixml_document,
lo_parser TYPE REF TO if_ixml_parser,
lo_weather_element TYPE REF TO if_ixml_element,
lo_weather_nodes TYPE REF TO if_ixml_node_list,
lo_curr_node TYPE REF TO if_ixml_node,
lv_value TYPE string,
lv_node_length TYPE i,
lv_node_index TYPE i,
* ls_weather TYPE zweather,
lv_node_name TYPE string,
lv_bin type xstring,
lv_node_value TYPE string,
lo_conv type ref to cl_abap_conv_in_ce,
lv_response type string,
l_client type string.
DATA: result_tab TYPE TABLE OF string,
w_result TYPE string .
lv_service = 'http://sgpvmc0031.apac.bosch.com/ActivityManager2/rest/v1/query/employees/amh1sgp/workItems/pending'.
* lv_service = 'https://rb-wam-q.bosch.com/ActivityManager2/rest/v1/query/employees/amh1sgp/workItems/pending'.
*BREAK-POINT.
CALL METHOD CL_HTTP_CLIENT=>CREATE
EXPORTING
HOST = 'sgpvmc0031.apac.bosch.com'
SERVICE = '80'
* PROXY_HOST =
* PROXY_SERVICE =
* SCHEME = SCHEMETYPE_HTTP
* SSL_ID =
* SAP_USERNAME =
* SAP_CLIENT =
IMPORTING
CLIENT = lo_http_client
EXCEPTIONS
ARGUMENT_NOT_FOUND = 1
PLUGIN_NOT_ACTIVE = 2
INTERNAL_ERROR = 3
others = 4
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
lo_http_client->request->set_method( if_http_request=>co_request_method_get ).
lo_http_client->authenticate( username = 'portal' password = 'portal' ).
cl_http_utility=>set_request_uri(
request = lo_http_client->request
uri = '/ActivityManager2/rest/v1/query/employees/amh1sgp/workItems/pending'
call method lo_http_client->request->set_header_field
EXPORTING
name = 'content-type'
value = 'text/plain'.
call method lo_http_client->send( ).
call method lo_http_client->receive( ).
Kindly help us to understand where to check.
Regards,
NitinHi,
Try to test the url in the standard report RSHTTP20.
Regards,
Felipe -
Any solutions for URL based routing
Hi,
I have an ASA 5505 that has 2 route (1 route connecting to MPLS VPN to HK branch office and 1 route connecting to Internet service provider). As you know, ISP in China blocking many web sites (such as facebook, youtube or etc.). So , I would like to route the traffic when the user in China office would like to browse facebook.com or youtube.com to HK ASA and egress to the internet by NAT. However, all other traffic remain to route to ISP in China, so that the Internet traffic in HK office will not be overload and the user in China can browse facebook.com or youtube.com.
I have researched a topic of regular expression with Modular Policy Framework (MPF). I expected that if the ASA can match the traffic, I can set next hop to HK office's ASA. However, this feature does not support https so that my expectation failed. Because the login page and sometime these web site using https for encryption. I hope URL based routing work on both http and https can work.
Do anyone have any solutions to resolve this situation? Please kindly provide it to me. I would appreiciate it if you could also provide configuration example with commands. I look forward to hearing from anyone soon. Thank you.
Regards,
Lapson WongWhat you are trying to do is policy-based routing which is not supported on the ASA. MPF is used only for inspection and QoS type serverices.
If using a proxy is not an option, you would need to put in a router that would send the desired traffic over the WAN network. another option, though I would not recommend it, is to find all the IPs of facebook, youtube, etc. and add static routes on the ASA pointing out the WAN interface. -
Hi,
while consuming the WCF service POST method Jquery, getting error in Chrome and firefox, in IE Its working fine.
ERROR:Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405.
Jquery used to call:
$.support.cors = true
$.ajax({
type: "POST",
url: serviceURL,
data: JSON.stringify(managedProps),
useDefaultXhrHeader:false,
contentType: "application/json; charset=utf-8",
dataType: "json",
//processData: true,
crossDomain: true,
success: function (data, status, jqXHR) {
alert("sucess");
error: function (xhr) {
alert("error");
WCF sevice Web.config
<webHttpBinding>
<!--<binding name="webHttpBindingWithJsonP" transferMode="StreamedRequest" />-->
<binding name="crossDomain" crossDomainScriptAccessEnabled="true" transferMode="StreamedResponse" />
</webHttpBinding>
</bindings>
<services>
<service name="DynamicRefinerWCF.DynamicRefiner">
<endpoint address="" behaviorConfiguration="REST" bindingConfiguration="crossDomain" binding="webHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<endpoint address="mex" binding="mexHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<host>
<baseAddresses>
<add baseAddress="http://localhost/example.svc" />
</baseAddresses>
</host>
</service>
</services>
<!--<protocolMapping>
<add binding="basicHttpsBinding" scheme="https" />
</protocolMapping>-->
<!--<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />-->
</system.serviceModel>
<system.webServer>
<!--<modules runAllManagedModulesForAllRequests="true"/>-->
<modules>
<remove name="WebDAVModule" />
</modules>
<handlers>
<remove name="WebDAV" />
</handlers>
<directoryBrowse enabled="true" />
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*"/>
<add name="Access-Control-Allow-Headers" value="Content-Type"/>
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS"/>
<add name="Access-Control-Request-Headers:" value="*" />
<add name="Access-Control-Request-Method:" value="*" />
</customHeaders>
</httpProtocol>
<!--
To browse web app root directory during debugging, set the value below to true.
Set to false before deployment to avoid disclosing web app folder information.
-->
<!--<directoryBrowse enabled="true"/>-->
</system.webServer>
</configuration>
Thanks,
SwathiRight on - I have done that a number of times.
-
Reporting Services URL Problem?
Hi,
I have just installed SQL Server 2012 on my Windows 8 Pro OS. When I tried to browse to the Reporting Service URL it gave this error message :
User 'Abhi\Abhilash DK' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
Please can anybody help me solve this problemAfter starting IE as admin and opening Report Manager, navigate to "Side settings" (on top right site), then to "Security" and add your account to "System Administrator" role. Afterwards you can open the URL also a normal user.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Passing a Parameter to URL based Iview BW report
Hi,
Can anyone let me know how to Pass a Parameter to a URL based Iview BW report.
The URL is as follows: I have the Variable Name as VAR_CISNUMBER and the Value for it should be Populated as 100020.
http://cnqdc01605.bsp.corp.net:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=CR_QUER1&VARIABLE_SCREEN=X&DUMMY=2
Immidialte help will be Very much appreciated. Lots of Post are there related to this but none of them is solving my issue. If any one can use the same URL provided above and give me Proper URL which will fetch me correct record.
Regards
Vishwanath
Message was edited by:
Vishwanath SrinivasanHi Vishwanath,
this URL should work:
http://cnqdc01605.bsp.corp.net:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=CR_QUER1&BI_COMMAND_1-BI_COMMAND_TYPE=SET_VARIABLES_STATE&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=VAR_CISNUMBER&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING=100020
Regards,
Nils -
Connect SharePoint to SQL Server Database Then Build Rules Based Returns System
Hello Guys,
I work for an ecommerce business. We sell a wide range of products to customers all around the world which are ordered from our websites and then dispatched to our customers from our warehouses.
I have been tasked with developing a computerised return system from the company because at the moment everything is done using paper forms.
We have all our customer, order and product data within SQL Server databases.
What I would like to know is...
1. Can we connect sharepoint online to a local sql server database
2. Could we then build searches within sharepoint to display data contained within these databases e.g. customer information etc
3. How is the data presented in sharepoint - is there a way to design how the data is displayed within sharepoint etc?
4. Can we then build a rules based return system within sharepoint? The on screen workflow would need to vary according to data contained within the database e.g. the weight if the product being returned and also on fields input by the service agent such
as the reason for the return, what solution the customer would like etc.
5. is it possible to build these workflows in such a way that they can be saved part way through then gone back to later
6. Can reports be build based on the returns that are being generated e.g. list of products most commonly returned
Sorry for all the questions, I am a bit of sharepoint novice. I think it may possible be able to do what we need but I just wondered if the answer to any of the above questions is definately a no because if it is that could mean it is not suitable
ThanksYou could use a BCS connection
http://community.office365.com/en-us/b/office_365_community_blog/archive/2012/10/11/business-data-connectivity-services-in-office-365-sharepoint-online.aspx, this will allow you to edit data in your non SharePoint SQL DB, on premises, from Office 365 SharePoint.
Search will index the web applications you point it at, and the lists from the BCS will be part of those web apps, site collections, sites at some place and will get indexed.
You can create views on the data, that can sort of work like a search, but when you search on the site where the lists are the query will return results based on the BCS data.
These views can be based on criteria such as the weight of the product being returned and other fields.
The data is presented as a list.
You can make it read only or read-write based on SharePoint permissions on the list. The account used to create the connection can edit.
BCS is possible in on-premises SharePoint too
here is a good read on it,
http://www.dotnetcurry.com/showarticle.aspx?ID=632
Stacy Simpkins | MCSE SharePoint | www.sharepointpapa.com
Maybe you are looking for
-
Problems with in/out points when submitting jobs via Terminal/command-line
I've writting a GUI based script which allows a user to select a source Quicktime file, and will encode that file to multiple formats, and trims each destination based on specific timecode in/out points. However, I'm having problems getting the Compr
-
How to install hd4000 driver and control fn key??
Hi, there I want to ask you what I have to do for resolving this problem I have done clean installation windows 7 home > win 7 enterprize_kor so I have installled drivers by myself but I couldn't hd4000 drivers and saw a message "This system is not s
-
Hello Everybody, what is the max video size I can share via email. I noticed that even with short videos (15sec) I cannot attach it since they are too big. Is there any specific size/time I can share ? Or is there any resizing app to help me in shari
-
why does printing (using AirPrint) from iPhoto (i4s) chop the image (and is borderless)?
-
10.6.5 update killed Exchange Mail account access
Directly after applying v10.6.5 (incremental update first, then combo update after this problem was discovered) update to my v10.6.4 Mac Mini, I completely lost connection of Exchange email in both Mail (v4.4) and Outlook 2011 (v14.0.1). I tried maki