URL based Iview creation problem

Hello,
We use EP6 SP9.
I am trying to build a url based iview with "capture" option.
When I enter the url address and hit "capture" I get the following error:
Unable to fetch site http://portal.Error # 401
Thanks for any help

Hi Tuval,
Yes I remember you from the Toptier days, hope life is treating you well.
Actually the Proxy settings could still be a problem for internal urls if infact you still have a proxy on your network. You would need to specify the bypass proxy domain settings in the http service just like you do in your browser. Except you use | as a delimeter eg. .sap.com|.sap.corp.
As I suggested you should still check that server side urls are working either internally or externally by typing a url into the 'server side connection test' in the Theme integrity tests page.
If this test passes and you cannot capture then its a capture problem either domain related or something else eg a timeout.
If this test fails then the capture will not work until server side requests can succeed.
Also, the capture service has some parameters as well but I have never changed the defaults.

Similar Messages

Passing a Parameter to URL based Iview BW report

Hi,
Can anyone let me know how to Pass a Parameter to a URL based Iview BW report.
The URL is as follows: I have the Variable Name as VAR_CISNUMBER and the Value for it should be Populated as 100020.
http://cnqdc01605.bsp.corp.net:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=CR_QUER1&VARIABLE_SCREEN=X&DUMMY=2
Immidialte help will be Very much appreciated. Lots of Post are there related to this but none of them is solving my issue. If any one can use the same URL provided above and give me Proper URL which will fetch me correct record.
Regards
Vishwanath
Message was edited by:
Vishwanath Srinivasan

Hi Vishwanath,
this URL should work:
http://cnqdc01605.bsp.corp.net:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=CR_QUER1&BI_COMMAND_1-BI_COMMAND_TYPE=SET_VARIABLES_STATE&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=VAR_CISNUMBER&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING=100020
Regards,
Nils

CRM IView creation problem

hello guys i am trying to make an iview out the standard par available in CRM Business package.
com.sap.pct.crm.opportunity.par
After creating an iview it gives me an error specifying component not found.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Could not find portal application com.sap.pct.crm.crmcontext.
Exception id: 01:38_13/01/06_0923_3792950
See the details for the exception ID in the log file
There is only one jsp file in that and no portalapp.xml
Please suggest

Hi Kotak
Have you followed the instructions in the CRM BP doco? There it asks you to activate the CRM Context service.
Please follows Prakash Singh's post or the CRM BP doco to correct the error.
Re: Business packcage for CRM 60.2.3 marketing calendar iview,
Cheers
Ankit

URGENT!!! inlineRendering of URL-Based Portlet problem !!!

Hi there;
About one month ago I faced a problem which one of the other member has faced it too. He posted the problem and till now nobody has answered it. Any clue in this following regards?
I have deployed a simple url-based portlet on Oracle9iAS portal by using PDK 2.0
problem occures when i want to use inlineRendering feature of PDK 2.0, it just poped-up a new windows with wrong url
Regards,

Have you tried the WebClipping portlet?
Its definitely worth taking a look at it.

Launch url based on variable

ok, this seems like it should be easy but im having problems,
using Flash CS3 and AS 2.
i have a variable named county, and variable named printUrl.
when you push a county button it shows "the County" in the
county field. what i want to do is have a button to load the url
based on the county in a new window.
frame one i have: printUrl = "mi/" +county+".html" ;
on the button i have : getURL(printUrl, "_blank", "");
it doesnt work, any help?
zodoria

ok, this seems like it should be easy but im having problems,
using Flash CS3 and AS 2.
i have a variable named county, and variable named printUrl.
when you push a county button it shows "the County" in the
county field. what i want to do is have a button to load the url
based on the county in a new window.
frame one i have: printUrl = "mi/" +county+".html" ;
on the button i have : getURL(printUrl, "_blank", "");
it doesnt work, any help?
zodoria

URL Based Transaction Launcher not loading

Hi All,
There is a URL based transaction launcher configured to display a crm opportunity report.
All the settings seem to be fine.
The configuration is done correctly in the wizard.
The URL is defined in view CRMV_IC_LTX_URL.
The logical link and Traget are also specified correctly.
the z handler class also gets called , but still the URL is not loading.
There is no error, but just a blank screen.
the system is CRM 5.2
could it be any browser issues or issue with BW system or any other issue ?
Could you please help me in finding the problem ?
thank you somuch,
regards,
Pushpa

Hello,
If you are watching this thread, I have a typical requiremnt like yours.
After creating the ITS URL id , I do not want to put this on the Navigation Bar.
But this lTS URL i want it as a link on one of the actiivty page. And also i should be able to pass parameter.
Please sugget what and how to achieve this.
Thanks,
Jaya.

How to use Application Integrator for iView Creation

Hi all
any one can help me how to create an iView(webshop b2b iview) by using the Application integrator in portal
Regards
sunil

1) creating URL ivew , for that you can refer this
URL iView Creation
2) You can directly deploy your .net project from the Visual Studio itself(sound's amazing right!!). SAP have provided a add-on to deploy directly from VS 2003/2005.
For that you need
SAP Portal Add-in 2.5 for Visual Studio 2005 - Hotfix 1.exe
SAP Portal Runtime 2.5 for Microsoft .NET - Hotfix 1.exe

Provide Webservice link not generating corresponding WSDL URL based on the service operation.

Hi All,
The provide webservice link is not generating corresponding WSDL URL based on Service Operation.
E.g. Currently we have two service operations namely Create and Update. We are using Rowset based messaging. Provide Webservice link generated correct WSDL URL for the create operation but it is providing the same URL for Update operation as well. kindly share your knowledge if you guys ever faced similar problem.
Regards
Viswa

Hi Hakan,
Thanks for your reply. Actually i am trying to generate WSDL URLs for each service operation for Travel & Expense module like create expense, update expense etc.
URL generated looks like this : http://xxx.xx.xxx.xx:8011/PSIGW/PeopleSoftServiceListeningConnector/HX_TE_EXPENSE_CLAIM.16.wsdl - this url is meant for CREATE operation. But for the UPDATE operation i am getting the same URL . Normally, Whenever i create WSDL URL for different operation the numeric part of the above URL changes like 16, 17 etc ..based on the service operation but no two operation have same URL like i am getting now. Please provide your knowledge on this issue.
Regards
Viswa

How to Set URL-Based Session Tracking to No

Dear BSP Gurus
I am fairly new to BSP applications, but I am getting an error which goes "BSP exception: Access to URL /sap(bD1lbiZjPTEwMCZkPW1pbg==)/bc/bsp/sap/crm_ui_frame/ is forbidden" and notice some say they solved it by Setting URL-Based Session Tracking to No, so my question is how do I do that.
Unless off course there is another way to solve my problem. Would greatly appreciate it.
Awaiting your favorable response

Hey Raja and Rajani
I actually activated all the applications below SAP->BC->->SAP-> **(Application)*-> but still I am getting that error.
When I then test the individual applications I get errors like
"BSP Exception: Das Objekt default.htm in der URL /sap/bc/bsp/sap/bp_cont_main/default.htm?sap-client=100&sap-sessioncmd=open ist nicht gültig"
I really have run out if ideas, I need your assistance, initially I thought it cd be the logical link coz the work centres appear fine then I tried to assign even standard business roles, its giving the same error.
What do I do now?

Portal Installed - Slow iView creation etc

Hi,
We have just completed the installation of the production EP 7 (2004s) on a new blade server.
Config
4 Swap Drives of 5GB each
OS - 2003 Server standard edition SP1 on C Drive (12GB)
EP instance installed on a separate netapps drive (40GB)
*4GB RAM
In creating a simple new iView it takes 3-4 minutes.
What could be the reason? Is there a mechanism to improve performance?
In our previous portal implementation (EP 6) the iView creation etc is very fast. (with a hardware configuration inferior to the one specified above)
Any advice would be highly appreciated,
Thanks and Regards,
Antony.

Hi,
Nope actually, we are still encountering this problem. But there is a workaround. Say you have created an iview, you can copy such iview and change the relevant parameters later including the ID, name and all other particulars in order to create new iviews rather than creating new iviews altogether through the wizard.
The copying activity takes just a couple of seconds.
Hope this helps..
Antony.
P.S. : Reward points would be appreciated.

How to get SSO userid to URL-based app?

I'm developing a web-app using Struts that will be accessed by Portal (I guess as a URL-based app). The web-app will not require login. The web-app will not be Portal "aware", except that it requires the SSO userid for auditing/logging purposes.
I know little about Portal and SSO. How can Portal be configured to send the Portal userid of the logged-in Portal user? Can it send it as a parameter in a GET or POST?
The version of Portal will be 9.0.2 (or greater).

This topic is answered in the PDK forum here:
How to get SSO userid to URL-based app?

PAR file missing in PAR selection list during iView creation

Hi Gurus
I created a jsp file and exported it through NWDS export option. But i dont get this par while iView creation. Its present when i searched in the support desk . Can anybody tell me the steps how to create a simple jsp in NWDS and test the same in Potal as iViews.
Thanks in advance

Hi,
Use NWDS wizards:
1) File -> Mew Project -> Portal Application -> Create a Portal Application Project
2) Right click on the project you created -> New -> Other -> Portal Application Project -> Create a new Portal Application Object
3) Select Portal Component -> JSPDynPage
4) Write your code ...
5) Deploy the par file & create iview from it.
Omri

Any solutions for URL based routing

Hi,
I have an ASA 5505 that has 2 route (1 route connecting to MPLS VPN to HK branch office and 1 route connecting to Internet service provider). As you know, ISP in China blocking many web sites (such as facebook, youtube or etc.). So , I would like to route the traffic when the user in China office would like to browse facebook.com or youtube.com to HK ASA and egress to the internet by NAT. However, all other traffic remain to route to ISP in China, so that the Internet traffic in HK office will not be overload and the user in China can browse facebook.com or youtube.com.
I have researched a topic of regular expression with Modular Policy Framework (MPF). I expected that if the ASA can match the traffic, I can set next hop to HK office's ASA. However, this feature does not support https so that my expectation failed. Because the login page and sometime these web site using https for encryption. I hope URL based routing work on both http and https can work.
Do anyone have any solutions to resolve this situation? Please kindly provide it to me. I would appreiciate it if you could also provide configuration example with commands. I look forward to hearing from anyone soon. Thank you.
Regards,
Lapson Wong

What you are trying to do is policy-based routing which is not supported on the ASA. MPF is used only for inspection and QoS type serverices.
If using a proxy is not an option, you would need to put in a router that would send the desired traffic over the WAN network. another option, though I would not recommend it, is to find all the IPs of facebook, youtube, etc. and add static routes on the ASA pointing out the WAN interface.

WD Java iView Creation Question/Issue - CE 7.1 EHP 1 Trial

Hi all,
Im posting this question here seeing as that the issue has arrised on an installation of the AS JAVA and EP shipped with CE 7.1 EHP1 Trial.
When attempting to create an iView for a deployed custom WD Java app on the trial Portal I am taken straight to the iView template selection without being given the options for iView creation( ie. create from template, portal component or WD Java app). Is this by design ( WD Java iView creation has changed from previous Portal versions or is limited in Trial installation), is this an issue with the components shipped with the Trial or an issue on my installation only?
Currently my only solution for deploying WD java content is to copy the actual application and paste it as Portal content which then creates a WD Proxy page with a single WD Proxy iView (that of the copy pasted WD app). This is fine for single app scenarios but becomes an issue with multiple apps on one page and drag and relate scenarios.
Kind regards,
Willem.

Hi Williem
Please check the SAP CE 7.1 EHP1 documentation for more information.
[CE 7.1 documentation|http://help.sap.com/saphelp_nwce711/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm]
[CE 7.1 iViews |http://help.sap.com/saphelp_nwce711/helpdata/en/f5/eb51590e6a11d7b84900047582c9f7/frameset.htm]
Hope this will helps you.
Thanks
Arun Jaiswal

Webdynpro ABAP based Iviews personalisation

Hi,
Can you please confirm if the right click +control option to personalise the iview method could be used for the iviews created out of webdynpro abap as well. or this method is only applicable for webdynpro java based iviews.
Rgrds,
Saket Kumar

Hi,
Kiran is right, you have certain approaches for personalization/customizing a WD4A. In the link he pointed you to, there already are two of three: End user Personalization and administrative Personalization (sap-confiq-mode=x). However, I advise you to use the way of component and application configuration as these are valid system-wide. Administrative Personalization only is valid client-wide.
I would advise you to go through this WD4A tutorial:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b52e13c3-0901-0010-8fa6-d11a51821b7c
best regards, Lukas

URL based Iview creation problem

Similar Messages

Maybe you are looking for