FF 23.0/24.0 on linux x64 cannot open any websites (and localhost) after working 24 hours

OS: Debian 7 x86-64
Browser: FF 23.0
/opt/firefox/firefox: ELF 64-bit LSB executable, x86-64
/usr/lib/flashplugin-nonfree/libflashplayer.so: ELF 64-bit LSB shared object, x86-64
I'm running FireFox and open in it from 3 to 20 tabs . Earlier in this state, it can work normally for a few months - I has not turn off the computer. Now : every morning begins with the fact that I have to kill FF and run it again with the recovery session. This is due to the fact that after 20-24 hours , he can not open any page (in this case there is no problem with the network ), even in a LAN and 127.0.0.1
If I upgrading an already open tab or open a new page in the tab header shows " Connecting ... " and nothing else was going on for a long time.

Check this .. This article will show you how to fix the problem so you can get back to surfing :)
[[https://support.mozilla.org/en-US/kb/websites-dont-load-troubleshoot-and-fix-errors]]

Similar Messages

Linux users cannot open Firefox on multiple systems that are mounting the same network drive as their home directory

I am supporting a user who is logging into multiple linux systems that all have the same /home directory mounted to a network filer.
When the user opens firefox on one system, he is unable to open firefox on other systems.
I'm assuming this is because firefox is storing his profile in /home.
These are Centos 5.4 x64 systems, authenticatiing to a Windows 2003 Domain. The filer that hosts the home directories is a NetApp with both CIFS and NFS permissions enabled on the volume that /home resides. We are using the version that came with the Centos installation, 3.0.12

So while this worked well for my computer at home, it does not work for the actual computer the disk is mounted on. If I try to mount the disk as the "office" user, the computer rejects the connection to itself and tells me to access it locally. Any ideas on how to handle this? Thanks again.
dlr

Photoshop x64 in CS5 Cannot Open Any File

When I open a JPG or RAW file in PS x64, it will show a box "stop running" and if I click OK, PS quits.
Can anyone tell me what should I do? I updated CS5 to the latest version already.

I'd start by updating all (e.g., video) drivers on the system to the latest the manufacturer has released.
Assuming you can get to the menus (before opening a file), you could experiment by temporarily disabling OpenGL in Edit - Preferences - Performance. Make sure you shut down Photoshop and restart it after making this change.
-Noel

On linux i cannot open firefox 33 due to exiting with failure status due to previous errors, file exists.

I am a newbie to computers and tried to update my firefox & downloaded it off of mozilla and tried to follow the commands as it was suggested for linux (ubuntu 10.04) to install it. Now when i click on the firefox 33 icon it shows that on command line ouput, tar: file exists, tar: exiting with failure status due to previous errors shows up. What do I need to do to update my current firefox? Please HELP!

Hi jadej740,
There are better forums for this knowledge, as Mozilla does not compile linux packages per build. [http://askubuntu.com/ Ask Ubuntu.com]
They may be able to give you a better answer. [[Install Firefox on Linux]]

New installation woes - SQLDeveloper on Oracle Linux x64 and Oracle 11g XE

Note that as an experienced Oracle developer in enterprise environments running MS Windows OS, I am familiar with SQLDeveloper for Windows. I don't have a lot of experience with Linux however. I don't find it intimidating, I just don't have a lot of accumulated knowledge.
I have recently been trying to set up a development environment on my Windows7 Professional x64 laptop.
1. Installed Oracle VBox
2. Installed Oracle Linux 5.2 inside the VBox (because Oracle 11g XE is not certified on 64 bit Windows, needed to go with a Linux OS)
3. Installed Oracle DB 11.2 XE
4. Installed JDK as instructed in the SQLDeveloper release notes for Linux x64
5. Installed SQLDeveloper 3.1.07.42-1
No apparent issues with any of the installations.
Problem : I can run SQL Plus from the command line, but when I click on the icon for SQLDeveloper, nothing happens. No error messages, nothing else.
Question #1 : Unsure how to debug/troubleshoot this. Will read through the installation and release notes for SQLDeveloper, but any suggestions would be welcome.
Question #2 : Could this be due to an issue with the JDK installation? It appeared to be successful (no obvious issues) but I can't see anything in the Oracle Linux menu system that tells me the JDK was installed successfully. How can I confirm that the JDK installation was successful?
Edited by: Peter Hartgerink on Jun 19, 2012 9:12 AM

>
The Linux x64 version of SQLDeveloper doesn't come bundled with JDK. There is a version of JDK recommended, with an advisory to install it before installing SQLDeveloper. This I did, with apparent success. I guess I'll have to install the JDK again and check my Java versions afterwards. Thanks.
>
I don't know what JDK you downloaded since you didn't say. What version was it? Post the link.
I find it hard to believe that the JDK version recommended was 1.4.2 since that is an ANCIENT version of Java, you have to hunt to even find it for download and most importantly the sql developer main download page clearly announces what version of Java is needed.
http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html
>
JDK Support
Oracle SQL Developer 3.1 is shipped with JDK1.6.0_11. However, you can connect to and use any JDK 1.6.0_11 or above. To use an existing JDK, download the zip files listed below "with JDK already installed."
>
As you can see you need JDK 1.6.0_11 or above.
If the version you say was recommended was actually 1.4.2 then that is an error; post the details so the developers can get that error fixed.
I don't know what is on your system and can only go by the information you provide
>
4. Installed JDK as instructed in the SQLDeveloper release notes for Linux x64
java version "1.4.2"
>
You either downloaded version 1.4.2, which seems unlikely, or your Linux included 1.4.2 and it is being used when you try to launch sql developer.
Perhaps your system now has multiple versions of Java on it but the version being used by sql developer is the wrong one. If so that is the issue you need to resolve.

I am installing Netweaver on Linux x64 but I dont it. Can you help me?

Hello.
I try install Netweaver WAS on Linux x64 according :
https://www.sdn.sap.com:443/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/603afa05-d2a4-2a10-a0bf-c86743f37368 [original link is broken]
later when I have finished to download 7 packages and cat command apply, try mount iso file on linus file system . I burn a DVD too , but do not access to them. So what can I do bad ?
Thank a lot
Regards

Hmm ..with so many large files SAP should at least provide the MD5SUM of each file so they can be checked once downloaded to confirm they are not corrupt before creating the image file!
When you are mounting the ISO image what command are you using ? Should be something like:
mount -t iso9660 iso.image /media/cdrom -o loop
If you are still having problems email the address at the bottom of the page you posted and ask them for the md5sum of each file.
Good luck.
Regards,
Nelis

J2ee sdk installing on linux x64

sorry for crossposting, but I guess I am not going to break peoples' ball by doing so. I am new here, so pls, let me do this once.
Hello guys, this is my first post here :) so don't bash me too much.
Trying to get the Java EE installed on gentoo linux x86-64 here. Downloaded java_ee_sdk-6u1-jdk-linux-x64.sh from oracle.com.
I have tried different jres:
32 bit, 64 bit.
now I have this jre :
ak@pussy ~/0.java $ java -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) 64-Bit Server VM (build 16.3-b01, mixed mode)so, doing:
ak@pussy ~/0.java $ ./java_ee_sdk-6u1-jdk-linux-x64.sh gives:
[#|2010-08-04T20:32:13.704+06:00|INFO|Install Engine|org.openinstaller.provider.task.TaskDriver|arg0=prod\=glassfish|OP_UNCONFIGURE:Unconfiguring product|#]
[#|2010-08-04T20:32:13.781+06:00|INFO|Install Engine|org.openinstaller.provider.conf.ConfiguratorFactory|arg0=class org.openinstaller.provider.conf.InstallationConfigurator|LOG_INFO:Info|#]
[#|2010-08-04T20:32:14.210+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Unconfiguring GlassFish:\[Unconfiguring GlassFish\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.232+06:00|INFO|Install Engine|org.openinstaller.provider.task.TaskDriver|arg0=prod\=jdk|OP_UNCONFIGURE:Unconfiguring product|#]
[#|2010-08-04T20:32:14.264+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Unconfiguring JDK:\[Unconfiguring JDK\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.289+06:00|INFO|Install Engine|org.openinstaller.provider.task.TaskDriver|arg0=prod\=updatetool|OP_UNCONFIGURE:Unconfiguring product|#]
[#|2010-08-04T20:32:14.318+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Unconfiguring Updatetool:\[Unconfiguring Updatetool\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.319+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Installation directory: /home/ak/0.java/glassfishv3:\[Installation directory: /home/ak/0.java/glassfishv3\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.322+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Shutting down notifier process:\[Shutting down notifier process\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.353+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Exception while unregistering notifier: Exception=EXECUTECMD_ERR
at org.openinstaller.util.ExecuteCommand.execute(ExecuteCommand.java:467)
at org.openinstaller.provider.conf.InstallationConfigurator.unconfigureUpdatetool(null:?)
at org.openinstaller.provider.conf.InstallationConfigurator.unConfigure(null:?)
at org.openinstaller.provider.conf.ConfigProvider.receiveRequest(ConfigProvider.java:573)
at org.openinstaller.bus.ControlBus.publishRequest(ControlBus.java:341)
at org.openinstaller.provider.task.UnconfigTask.perform(UnconfigTask.java:88)
at org.openinstaller.provider.task.TaskDriver.executeTask(TaskDriver.java:378)
at org.openinstaller.provider.task.TaskProvider.receiveRequest(TaskProvider.java:117)
at org.openinstaller.bus.ControlBus$3.run(ControlBus.java:404)
at java.lang.Thread.run(Thread.java:619)
Caused By=java.io.IOException: Cannot run program "/home/ak/0.java/glassfishv3/updatetool/bin/updatetool": java.io.IOException: error=2, No such file or directory
at java.lang.ProcessBuilder.start(ProcessBuilder.java:460)
at java.lang.Runtime.exec(Runtime.java:593)
at java.lang.Runtime.exec(Runtime.java:509)
at org.openinstaller.util.ExecuteCommand.execute(ExecuteCommand.java:423)
at org.openinstaller.provider.conf.InstallationConfigurator.unconfigureUpdatetool(null:?)
at org.openinstaller.provider.conf.InstallationConfigurator.unConfigure(null:?)
at org.openinstaller.provider.conf.ConfigProvider.receiveRequest(ConfigProvider.java:573)
at org.openinstaller.bus.ControlBus.publishRequest(ControlBus.java:341)
at org.openinstaller.provider.task.UnconfigTask.perform(UnconfigTask.java:88)
at org.openinstaller.provider.task.TaskDriver.executeTask(TaskDriver.java:378)
at org.openinstaller.provider.task.TaskProvider.receiveRequest(TaskProvider.java:117)
at org.openinstaller.bus.ControlBus$3.run(ControlBus.java:404)
at java.lang.Thread.run(Thread.java:619)
Context-Items=[[method=org.openinstaller.util.ExecuteCommand.execute(), operation=EXECUTECMD_ERR, command=[/home/ak/0.java/glassfishv3/updatetool/bin/updatetool, --notifier, --shutdown]]]:\[Exception while unregistering notifier: Exception=EXECUTECMD_ERR
at org.openinstaller.util.ExecuteCommand.execute(ExecuteCommand.java:467)
at org.openinstaller.provider.conf.InstallationConfigurator.unconfigureUpdatetool(null:?)
at org.openinstaller.provider.conf.InstallationConfigurator.unConfigure(null:?)
at org.openinstaller.provider.conf.ConfigProvider.receiveRequest(ConfigProvider.java:573)
at org.openinstaller.bus.ControlBus.publishRequest(ControlBus.java:341)
at org.openinstaller.provider.task.UnconfigTask.perform(UnconfigTask.java:88)
at org.openinstaller.provider.task.TaskDriver.executeTask(TaskDriver.java:378)
at org.openinstaller.provider.task.TaskProvider.receiveRequest(TaskProvider.java:117)
at org.openinstaller.bus.ControlBus$3.run(ControlBus.java:404)
at java.lang.Thread.run(Thread.java:619)
Caused By=java.io.IOException: Cannot run program "/home/ak/0.java/glassfishv3/updatetool/bin/updatetool": java.io.IOException: error=2, No such file or directory
.and so on.
Any ideas ?

I guess this should give more details about issues I am having :
Using the user defined JAVA_HOME : /home/ak/0.java/jre1.6.0_21_64
Entering setup...
WARNING: Warning: Could not detect OS Architecture, falling back to os.arch [Architecture=GenuineIntel ]
FINE: completed initializing provider svc://general/orchestrator
FINEST: Ignoring blank answer file or syntax error in ,file:///tmp/install.080510113914/install.properties
FINEST: BGImagePanel() called by org.openinstaller.util.ui.StandaloneSplash?<init>
FINEST: BGImagePanel.setBgImage(Image BufferedImage@1c5d9084: type = 5 ColorModel: #pixelBits = 24 numComponents = 3 color space = java.awt.color.ICC_ColorSpace@42bad8a8 transparency = 1 has alpha = false isAlphaPre = false ByteInterleavedRaster: width = 728 height = 435 #numDataElements 3 dataOff[0] = 2) called by org.openinstaller.util.ui.StandaloneSplash?<init>
FINE: DISCOVERING_SERVICE_PROVIDERS
FINE: Not instantiating null - not a ServiceProvider
Exception=null
at java.net.URLClassLoader$1.run(null:?)
at java.security.AccessController.doPrivileged(null:?)
at java.net.URLClassLoader.findClass(null:?)
at org.openinstaller.core.EngineBootstrap.findClass(EngineBootstrap.java:249)
at java.lang.ClassLoader.loadClass(null:?)
at org.openinstaller.core.EngineBootstrap.loadClass(EngineBootstrap.java:357)
at java.lang.ClassLoader.loadClass(null:?)
at org.openinstaller.core.EngineBootstrap.loadClass(EngineBootstrap.java:318)
at java.lang.Class.forName0(null:?)
at java.lang.Class.forName(null:?)
at org.openinstaller.core.Orchestrator.findServiceProviders(Orchestrator.java:763)
at org.openinstaller.core.Orchestrator.main(Orchestrator.java:447)
at sun.reflect.NativeMethodAccessorImpl.invoke0(null:?)
at sun.reflect.NativeMethodAccessorImpl.invoke(null:?)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(null:?)
at java.lang.reflect.Method.invoke(null:?)
at org.openinstaller.core.EngineBootstrap.main(EngineBootstrap.java:208)
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: DISCOVERED_SERVICE_PROVIDERS
FINE: completed initializing provider svc://general/system
FINE: completed initializing provider svc://general/name
FINE: completed initializing provider svc://general/product
FINEST: Initializing configuration provider
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: ConfigRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=MEDIA_LOCATION}] By: [org.openinstaller.util.install.Common.getMediaLocationURL(*)
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: ConfigRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=MEDIA_LOCATION}] By: [org.openinstaller.util.install.Common.getMediaLocationURL(*)
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: ConfigRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=MEDIA_LOCATION}] By: [org.openinstaller.util.install.Common.getMediaLocationURL(*)
FINE: completed initializing provider svc://general/task
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: Mode-Request data: EngineConfigCommand{ cmd=GET_CONFIG, data=DRY_RUN_FILE}] By: [org.openinstaller.provider.sims.SIMSProvider.init(*)
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: EngineConfigRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=PLATFORM_PLUGIN_PATH}] By: [org.openinstaller.provider.platform.SystemInterface.init(*)
FINE: completed initializing provider svc://general/operation
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: ModeRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=PKG_FORMAT}] By: [org.openinstaller.sims.BackendFactory.discoverBackend(*)
FINE: LOADING_CLASS
FINE: Can't load SIMS backend org.openinstaller.sims.backends.zip.unix.linux.SIMSBackend
Exception=org.openinstaller.sims.backends.zip.unix.linux.SIMSBackend
at java.net.URLClassLoader$1.run(null:?)
at java.security.AccessController.doPrivileged(null:?)
at java.net.URLClassLoader.findClass(null:?)
at org.openinstaller.core.EngineBootstrap.findClass(EngineBootstrap.java:249)
at java.lang.ClassLoader.loadClass(null:?)
at org.openinstaller.core.EngineBootstrap.loadClass(EngineBootstrap.java:357)
at java.lang.ClassLoader.loadClass(null:?)
at org.openinstaller.core.EngineBootstrap.loadClass(EngineBootstrap.java:318)
at java.lang.Class.forName0(null:?)
at java.lang.Class.forName(null:?)
at org.openinstaller.sims.BackendFactory.getBackendByClass(BackendFactory.java:146)
at org.openinstaller.sims.BackendFactory.discoverBackend(BackendFactory.java:112)
at org.openinstaller.sims.BackendFactory.getBackend(BackendFactory.java:80)
at org.openinstaller.sims.SIMSContext.<init>(SIMSContext.java:131)
at org.openinstaller.provider.sims.SIMSProvider.init(SIMSProvider.java:95)
at org.openinstaller.bus.ControlBus$1.run(ControlBus.java:192)
at java.lang.Thread.run(null:?)
]

Installing java ee sdk (java_ee_sdk-6u1-jdk-linux-x64.sh) on x64 linux

Hello guys, this is my first post here :) so don't bash me too much.
Trying to get the Java EE installed on gentoo linux x86-64 here. Downloaded java_ee_sdk-6u1-jdk-linux-x64.sh from oracle.com.
I have tried different jres:
32 bit, 64 bit.
now I have this jre :
ak@pussy ~/0.java $ java -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) 64-Bit Server VM (build 16.3-b01, mixed mode)so, doing ak@pussy ~/0.java $ ./java_ee_sdk-6u1-jdk-linux-x64.sh gives me nasty file not found exception & hence I can't get sdk installed:
[#|2010-08-04T20:32:13.704+06:00|INFO|Install Engine|org.openinstaller.provider.task.TaskDriver|arg0=prod\=glassfish|OP_UNCONFIGURE:Unconfiguring product|#]
[#|2010-08-04T20:32:13.781+06:00|INFO|Install Engine|org.openinstaller.provider.conf.ConfiguratorFactory|arg0=class org.openinstaller.provider.conf.InstallationConfigurator|LOG_INFO:Info|#]
[#|2010-08-04T20:32:14.210+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Unconfiguring GlassFish:\[Unconfiguring GlassFish\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.232+06:00|INFO|Install Engine|org.openinstaller.provider.task.TaskDriver|arg0=prod\=jdk|OP_UNCONFIGURE:Unconfiguring product|#]
[#|2010-08-04T20:32:14.264+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Unconfiguring JDK:\[Unconfiguring JDK\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.289+06:00|INFO|Install Engine|org.openinstaller.provider.task.TaskDriver|arg0=prod\=updatetool|OP_UNCONFIGURE:Unconfiguring product|#]
[#|2010-08-04T20:32:14.318+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Unconfiguring Updatetool:\[Unconfiguring Updatetool\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.319+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Installation directory: /home/ak/0.java/glassfishv3:\[Installation directory: /home/ak/0.java/glassfishv3\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.322+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Shutting down notifier process:\[Shutting down notifier process\]*\[{0} {1}\]|#]
[#|2010-08-04T20:32:14.353+06:00|INFO|Install Engine|org.openinstaller.provider.conf.InstallationConfigurator||Exception while unregistering notifier: Exception=EXECUTECMD_ERR
at org.openinstaller.util.ExecuteCommand.execute(ExecuteCommand.java:467)
at org.openinstaller.provider.conf.InstallationConfigurator.unconfigureUpdatetool(null:?)
at org.openinstaller.provider.conf.InstallationConfigurator.unConfigure(null:?)
at org.openinstaller.provider.conf.ConfigProvider.receiveRequest(ConfigProvider.java:573)
at org.openinstaller.bus.ControlBus.publishRequest(ControlBus.java:341)
at org.openinstaller.provider.task.UnconfigTask.perform(UnconfigTask.java:88)
at org.openinstaller.provider.task.TaskDriver.executeTask(TaskDriver.java:378)
at org.openinstaller.provider.task.TaskProvider.receiveRequest(TaskProvider.java:117)
at org.openinstaller.bus.ControlBus$3.run(ControlBus.java:404)
at java.lang.Thread.run(Thread.java:619)
Caused By=java.io.IOException: Cannot run program "/home/ak/0.java/glassfishv3/updatetool/bin/updatetool": java.io.IOException: error=2, No such file or directory
at java.lang.ProcessBuilder.start(ProcessBuilder.java:460)
at java.lang.Runtime.exec(Runtime.java:593)
at java.lang.Runtime.exec(Runtime.java:509)
at org.openinstaller.util.ExecuteCommand.execute(ExecuteCommand.java:423)
at org.openinstaller.provider.conf.InstallationConfigurator.unconfigureUpdatetool(null:?)
at org.openinstaller.provider.conf.InstallationConfigurator.unConfigure(null:?)
at org.openinstaller.provider.conf.ConfigProvider.receiveRequest(ConfigProvider.java:573)
at org.openinstaller.bus.ControlBus.publishRequest(ControlBus.java:341)
at org.openinstaller.provider.task.UnconfigTask.perform(UnconfigTask.java:88)
at org.openinstaller.provider.task.TaskDriver.executeTask(TaskDriver.java:378)
at org.openinstaller.provider.task.TaskProvider.receiveRequest(TaskProvider.java:117)
at org.openinstaller.bus.ControlBus$3.run(ControlBus.java:404)
at java.lang.Thread.run(Thread.java:619)
Context-Items=[[method=org.openinstaller.util.ExecuteCommand.execute(), operation=EXECUTECMD_ERR, command=[/home/ak/0.java/glassfishv3/updatetool/bin/updatetool, --notifier, --shutdown]]]:\[Exception while unregistering notifier: Exception=EXECUTECMD_ERR
at org.openinstaller.util.ExecuteCommand.execute(ExecuteCommand.java:467)
at org.openinstaller.provider.conf.InstallationConfigurator.unconfigureUpdatetool(null:?)
at org.openinstaller.provider.conf.InstallationConfigurator.unConfigure(null:?)
at org.openinstaller.provider.conf.ConfigProvider.receiveRequest(ConfigProvider.java:573)
at org.openinstaller.bus.ControlBus.publishRequest(ControlBus.java:341)
at org.openinstaller.provider.task.UnconfigTask.perform(UnconfigTask.java:88)
at org.openinstaller.provider.task.TaskDriver.executeTask(TaskDriver.java:378)
at org.openinstaller.provider.task.TaskProvider.receiveRequest(TaskProvider.java:117)
at org.openinstaller.bus.ControlBus$3.run(ControlBus.java:404)
at java.lang.Thread.run(Thread.java:619)
Caused By=java.io.IOException: Cannot run program "/home/ak/0.java/glassfishv3/updatetool/bin/updatetool": java.io.IOException: error=2, No such file or directory
.and so on

I guess this should give more details about issues I am having :
Using the user defined JAVA_HOME : /home/ak/0.java/jre1.6.0_21_64
Entering setup...
WARNING: Warning: Could not detect OS Architecture, falling back to os.arch [Architecture=GenuineIntel ]
FINE: completed initializing provider svc://general/orchestrator
FINEST: Ignoring blank answer file or syntax error in ,file:///tmp/install.080510113914/install.properties
FINEST: BGImagePanel() called by org.openinstaller.util.ui.StandaloneSplash?<init>
FINEST: BGImagePanel.setBgImage(Image BufferedImage@1c5d9084: type = 5 ColorModel: #pixelBits = 24 numComponents = 3 color space = java.awt.color.ICC_ColorSpace@42bad8a8 transparency = 1 has alpha = false isAlphaPre = false ByteInterleavedRaster: width = 728 height = 435 #numDataElements 3 dataOff[0] = 2) called by org.openinstaller.util.ui.StandaloneSplash?<init>
FINE: DISCOVERING_SERVICE_PROVIDERS
FINE: Not instantiating null - not a ServiceProvider
Exception=null
at java.net.URLClassLoader$1.run(null:?)
at java.security.AccessController.doPrivileged(null:?)
at java.net.URLClassLoader.findClass(null:?)
at org.openinstaller.core.EngineBootstrap.findClass(EngineBootstrap.java:249)
at java.lang.ClassLoader.loadClass(null:?)
at org.openinstaller.core.EngineBootstrap.loadClass(EngineBootstrap.java:357)
at java.lang.ClassLoader.loadClass(null:?)
at org.openinstaller.core.EngineBootstrap.loadClass(EngineBootstrap.java:318)
at java.lang.Class.forName0(null:?)
at java.lang.Class.forName(null:?)
at org.openinstaller.core.Orchestrator.findServiceProviders(Orchestrator.java:763)
at org.openinstaller.core.Orchestrator.main(Orchestrator.java:447)
at sun.reflect.NativeMethodAccessorImpl.invoke0(null:?)
at sun.reflect.NativeMethodAccessorImpl.invoke(null:?)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(null:?)
at java.lang.reflect.Method.invoke(null:?)
at org.openinstaller.core.EngineBootstrap.main(EngineBootstrap.java:208)
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: FOUND_SERVICE_PROVIDER
FINE: DISCOVERED_SERVICE_PROVIDERS
FINE: completed initializing provider svc://general/system
FINE: completed initializing provider svc://general/name
FINE: completed initializing provider svc://general/product
FINEST: Initializing configuration provider
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: ConfigRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=MEDIA_LOCATION}] By: [org.openinstaller.util.install.Common.getMediaLocationURL(*)
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: ConfigRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=MEDIA_LOCATION}] By: [org.openinstaller.util.install.Common.getMediaLocationURL(*)
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: ConfigRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=MEDIA_LOCATION}] By: [org.openinstaller.util.install.Common.getMediaLocationURL(*)
FINE: completed initializing provider svc://general/task
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: Mode-Request data: EngineConfigCommand{ cmd=GET_CONFIG, data=DRY_RUN_FILE}] By: [org.openinstaller.provider.sims.SIMSProvider.init(*)
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: EngineConfigRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=PLATFORM_PLUGIN_PATH}] By: [org.openinstaller.provider.platform.SystemInterface.init(*)
FINE: completed initializing provider svc://general/operation
FINEST: BusRequest For: [svc://general/EngineConfig] Request: [BusRequest: name: ModeRequest data: EngineConfigCommand{ cmd=GET_CONFIG, data=PKG_FORMAT}] By: [org.openinstaller.sims.BackendFactory.discoverBackend(*)
FINE: LOADING_CLASS
FINE: Can't load SIMS backend org.openinstaller.sims.backends.zip.unix.linux.SIMSBackend
Exception=org.openinstaller.sims.backends.zip.unix.linux.SIMSBackend
at java.net.URLClassLoader$1.run(null:?)
at java.security.AccessController.doPrivileged(null:?)
at java.net.URLClassLoader.findClass(null:?)
at org.openinstaller.core.EngineBootstrap.findClass(EngineBootstrap.java:249)
at java.lang.ClassLoader.loadClass(null:?)
at org.openinstaller.core.EngineBootstrap.loadClass(EngineBootstrap.java:357)
at java.lang.ClassLoader.loadClass(null:?)
at org.openinstaller.core.EngineBootstrap.loadClass(EngineBootstrap.java:318)
at java.lang.Class.forName0(null:?)
at java.lang.Class.forName(null:?)
at org.openinstaller.sims.BackendFactory.getBackendByClass(BackendFactory.java:146)
at org.openinstaller.sims.BackendFactory.discoverBackend(BackendFactory.java:112)
at org.openinstaller.sims.BackendFactory.getBackend(BackendFactory.java:80)
at org.openinstaller.sims.SIMSContext.<init>(SIMSContext.java:131)
at org.openinstaller.provider.sims.SIMSProvider.init(SIMSProvider.java:95)
at org.openinstaller.bus.ControlBus$1.run(ControlBus.java:192)
at java.lang.Thread.run(null:?)
]

ODBC instant client driver rpm for Linux X64

Hi,
Can anyone tell me where can I find odbc instant client driver rpm for Linux X64 edition.
I can only see for Linux x32 not for X64.
Edited by: user11128035 on Sep 6, 2009 3:13 AM
Edited by: user11128035 on Sep 6, 2009 3:15 AM

I don't understand your step 7 (the first step 7, actually).
What is that unixODBC-2.2.14-linux-x86-32.tar.gz, where did it come from, and why are you doing all that?
unixODBC should be installed after step 5.
I guess that that is the cause of your problem.
isql is not linked against readline at all on my RHEL 5 system.
Do you notice any improvement after removing the files from that tar.bz file?
Yours,
Laurenz Albe

OIM Install. Linux x64. errror /idm/Disk1/linux64/unzip ...

Hello All.
Try to install OIM on linux x64.
Try to start runInstaller and got error :
sh: /idm/Disk1/linux64/unzip: No such file or directory
File is present.
I try to start runInstaller from oracle and root users.
Oracle 11g Database fresh instalation present on this server.
Best regards Denis Eltsov

Follow this:
http://www.orafaq.com/forum/t/143402/2/

OWB x64 bit client installed with RDBMS does not work?

Has anyone tried the OWB 11gR1 (11.1.0.7) client installed with Oracle database x64? I found out that I could not perform the following tasks:
1. could not create a new table
2. could not import MDL file the first time for a project (only project name is added; I had to run the second time to get all the profile and maps imported)
It throw out an OWB internal error and hangs after having the above two problems. Is there any configuration need to be done to get it to work correctly?
Thanks,
htu

The OWB x64 bit client is broken:
https://metalink2.oracle.com/metalink/plsql/f?p=130:15:1377335913212499434::::p15_database_id,p15_docid,p15_show_header,p15_show_help,p15_black_frame,p15_font:BUG,8871963,1,1,1,helvetica
This is what is this document:
"Only server side functionality (repo creation, ControlCenter, OMB) is supported on server platforms. Design client needs to run on Linux-32 or
Windows-32. This is not a bug in OWB. "
Has anyone tried the OWB client installed with x32 Oracle database? Does the OWB client with 32 database work?
Thanks,
HT

Cannot open file or create image in Photoshop CS5 (12.0.4 x64)

Photoshop starts as normal. When I do File>Open or File>New nothing happens. See demo here http://www.screenr.com/LUkH
I've searched the webs and see many cases of what sounds like a similar issue, but I cannot get any of the suggested fixes to work for me.
http://forums.adobe.com/thread/1121162
http://www.dtg-forums.com/forum/showthread.php?t=668
http://en.kioskea.net/forum/affich-449-photoshop-cs3-can-t-open-files
What I've tried so far:
I've uninstalled, deleted all AppData and ProgramFiles folders, installed, updated. Still no luck. Version 12.0.4 x64.
I've removed all printers.
I've done the preferences reset trick by holding down CTRL+ALT+SHIFT when launching Photoshop.
I've done the super weird ESC and CTRL+SHIFT+S described in the last link above (sounds like nonsense!).
Photoshop was working fine on this same computer earlier, but one day decided to stop working.
Can't even access the Adobe Chat support for CS5 even though I paid them a lot for this currently 100% useless software.
I'm running Windows 7 X64, fully updated.
Photoshop CS5 (12.0.4 x64). Freshly installed.
Any help greatly appreciated.

Transcript from unhelpful Adobe Support, CS5 is no longer supported. Basically this turned into a hopless a rant on my part...
Tazkir: Hello. Welcome to Adobe Technical Support.
Tazkir: Hi magnus.
Magnus Olstad Hansen: Hi. My Photoshop is no longer able to open images or create new images. I've tried everything I can imagine would help at this point, and I really need some advice. I've also asked the community here (http://forums.adobe.com/message/5720427#5720427). Please advice what I can do to be able to use the product I've bought from you?
Tazkir: Please allow me a moment while I look into your account & verify the details.
Tazkir: Could you please provide me the email address registered with Adobe?
Magnus Olstad Hansen: (email)
Tazkir: Thank you for the email address.
Tazkir: Just to confirm you were able to open Photoshop before.
Magnus Olstad Hansen: That is correct. It's been working before, on the same computer.
Tazkir: I am sorry to inform you that I could have really helped you . But this issue is not under our support area. I am sorry to inform you that the concerned team will be available after .I request you to please contact us back via same live chat after .so that your issue will be handled and resolved by the concerned team.
Tazkir: Is there anything else I can help you with?
Magnus Olstad Hansen: after ... when?
Tazkir: During week days.
Magnus Olstad Hansen: Ok. I've made so many failed attempts at getting help with this issue, could you please leave a note for the relevant support team and have them contact me at (email) ?
Magnus Olstad Hansen: It would be easier for everyone, I imagine.
Magnus Olstad Hansen: Or even if they just reply to the forum post.
Tazkir: I am sorry I checked and see that you have Cs5, We don't support CS5 anymore. Please visit the forum.
Magnus Olstad Hansen: I will never buy software from Adobe again.
Magnus Olstad Hansen: I already linked you to a forum post, noone can help me there.
Magnus Olstad Hansen: And Adobe does not care.
Tazkir: I am sorry for the inconvenience caused to you.
Magnus Olstad Hansen: Yes. 2 years is not an acceptable lifetime for purchased software.
Magnus Olstad Hansen: I will be forced to replace my legally purchased version with a pirated one, support and help is better for that software than the legal one.
Tazkir: Is there anything else I can help you with?
Magnus Olstad Hansen: Well, no, I only have this problem.
Tazkir: Thank you for contacting Adobe. Good Bye.

I have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

i have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

There is no need for anyone to use 32-bit version anymore.
Retail comes with both. Or you can save on just buying 64-bit System Builder disc.
Better support for today's hardware with larger video graphic memory and systems.
Better memory management.

How can I get Windows (v7 x64) to open in Dreamweaver (CS5) if I right click it?

Hi
How can I get Windows (v7 x64) to open in Dreamweaver (CS5) if I right click it?
None of the normal mechanisms of setting an application to be the DEFAULT application for the .HTML file type seem to work...
Extremely irritating.
J

Jon Fritz II wrote:
So when you right-click an .html file and choose Open With, what are you seeing?
Is the check box for "Always use the selected program to open this kind of file" checked?
A list of various "recommended applications" but not including Dreamweaver. It's not in the list of Other Applications either. And if I browse for it, my selection of dreamweaver.exe is flatly ignored without message.
>Is the check box for "Always use the selected program to open this kind of file" checked?
Jon Fritz II wrote:
So when you right-click an .html file and choose Open With, what are you seeing?
Is the check box for "Always use the selected program to open this kind of file" checked?
A list of various "recommended applications" but not including Dreamweaver. It's not in the list of Other Applications either. And if I browse for it, my selection of dreamweaver.exe is flatly ignored without message.
> Is the check box for "Always use the selected program to open this kind of file" checked?
Yes.
J

Problem with Win 7 x64, WWAN or WiFi card and Windows XP Mode

I have a T500 with switchable graphics (2056-4RU) with a clean install of Windows 7 Pro x64 with the AT&T WWAN card.
With all the Win7 RTM drivers and Access Connections for Win7, I had a problem that the WWAN card (Ericson F3507g, purchased from Lenovo and working flawlessly under Vista 32-bit) would not initialize. Support told me to uninstall the Win 7 versions of the Power Manager Drivers, WWAN card driver and Access Connections and replace them with the Vista counterparts, which restored the functionality of my WWAN card. Based on the speed with which the support tech came up with the suggested fix, I suspect I am not the only one with the disappearing WWAN card problem.
Now I have found that starting the Windows XP Mode virtual machine kills the WiFi functionality (Intel WiFi Link 5100 AGN) until I disable and re-enable the WiFi adapter in Device Manager and then restart the system. (I have not problems with XP Mode and with the Win7 drivers / Access Connections opening Windows XP Mode did not cause the problem with the WiFi.) Opening Windows XP Mode causes no problem with the wired network adapter on my system).
Thus it appears that I can have functionality of the WWAN and WiFi adapters with XP Mode using the Released Win 7 versions and functionality of Windows XP Mode together OR I can have WWAN but not WiFi functionality with XP Mode using the Vista drivers that support suggested. However, it seems that I cannot have WWAN, WiFi and XP Mode concurrently.
I reproduced the above XP mode / WWAN problem / WiFi problems on a T500 with Win7 x64 owned by another family member.
Does anyone (particularly anyone from Lenovo) have fix for this?
Thanks.

for the sim card, try this:
http://jack.ukleja.com/update-ericsson-f3507g-mobile-broadband-on-windows-7-with-lenovo-thinkpad/com...
I have another operator and I finally gave up. apparently it's also no that easy to install the SIM card, if the plastic thing that helps to remove the SIM card is not the right position, it will overlap the SIM Card chip.
can't help for the WIFI. I had the problems too with access connection and decided to remove it. I use Seven's network manager, which does an equally good job.
Since I have the switch to turn off the wireless, I don't really need access connection anyway.
Finally, something that I learns while struggling with the bluetooth driver: the order in which power manager, access connection and the different drivers are installed DOES affect their effectiveness. I forgot the details but I remember 2 things:
always read the TXT file that is available on the driver page on the lenovo web site and install power manager and access connection last.
Good luck

FF 23.0/24.0 on linux x64 cannot open any websites (and localhost) after working 24 hours

Similar Messages

Maybe you are looking for