FF4.0, 32 bit Win 7 Pro, toolbar settings, bookmarks not saved. How to solve?

Greetings. After upgrading from XP, SP3 to Win 7 Pro, 32 bit, neither the settings for my toolbars nor my boodmark changes are kept. I've tried the solutions for these problems listed for XP, but they don't seem to function for 7. Is there a solution to this problem any non-geek can use? Do I need to upgrade to FF5, and if so, can I use my current Google Toolbar (kind of like a security blanket) with it? My thanks for any rational and useful responses.

In premiere I can control the camera, I can capture sound, but I cannot capture video
If you can capture sound, you also capture video, because it is a transport stream, and nothing more than a digital transfer of binary data. There is no way you can only capture sound and not video, because they are in the same data stream. You can limit import into your project to audio only, or video only, but the captured stream always includes both audio and video. So check your import settings or use HDVSplit, a free capture utility to capture.

Similar Messages

Have 64-bit win 7 pro.........which premiere OR premiere elements will utilize 64-bit fully?

have 64-bit win 7 pro.........which premiere OR premiere elements will utilize 64-bit fully?..... tired of the slowness of PE 9.0

Markpic
I am not certain how your post contributes to an understanding of the question asked.
Great that you have Premiere Elements 10 and 11 on Windows 7 32 bit, but you are not pointing out to the writer that, under those circumstances, your Premiere Elements 10 and 11 are 32 bit applications running in a 32 bit computer environment and as such have the limitations of 32 bit system, including max supported installed RAM = 4.0 of which typically 3.0 or less of that are available.
And you have not indicated how the writer of the thread would obtain a 64 bit version of versions 10 and 11 if that was what is wanted.
All of those points and more had been made in the thread before your post.
How is your post responding to the thread as titled and question described?
have 64-bit win 7 pro.........which premiere OR premiere elements will utilize 64-bit fully?
ATR

I lost every single thing on my macbook pro and i do not know how to recover the 77 gb of software how do i restore all of my data back on my macbook pro

i lost every single thing on my macbook pro and i do not know how to recover my 77 gb of software data back to my computer how do i get this back?
thank you

Welcome to the Apple Community.
Which software do you use to keep your back up.

I am using logic pro x and do not know how to fade a track at the end of a song or change the volume in a portion of the track.

I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.

Hi
rmarlia wrote:
I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.
Armadillosound wrote:
To create a fade out press T to open the tool menu and select the fade tool.
Completely inappropriate, and they all also not help with volume adjustments. Fades will only apply to Audio Regions in the Tracks area: they will not fade out the complete mix unless you first Bounce it, add that to the Tracks area, apply the Fades with the Fade tool, then Bounce in Place (Again).
Much much better to make use of Track automation to take care of Volume adjustments, and to Fade out the end of the song by applying Track Automation to the Output Channel
https://help.apple.com/logicpro/mac/10/#lgcpb1a1ea03
CCT

R7770 / Win XP pro driver issue - directx not supported help please!

Hi guys sorry to bother you, and for such a long question.
I've just purchased a brand new MSI branded AMD radeon r7770 to replace my nvidia 8800gt graphics card which finally bit the dust last week.
Despite uninstalling the old nVidia drivers, trying the ones that came with the card and downloading and installing the very latest versions from both the AMD and MSI sites, I still cannot get directx to work. At first glance, the drivers look to be installed OK, (the Catalyst Control Center starts up etc) but none of my games run, and the desktop refresh is incredibly slow. KSP's crash log helpfully states that it cannot find the device driver. When I run Dxdiag.exe all the directx diagnostic tags are greyed out and the info box states that the card does not support directx.
The system is pretty ancient but should still be up to the task as it was a well speced gaming PC in its day:
Mboard: Asus P5K3 Deluxe (intel P35 chipset)
CPU: Intel core2duo Q6600 (quad-core)
mem: 4 gig Corsair ddr3 mem.
PSW: 600W
OS: Win XP pro SP3
I'm aware that this is an old PCI-E 1.0 board and the card is designed around PCI-E 3.0, but the computer boots up and starts Windows just fine. Both the Bios and Windows detect the R7770 correctly. (I'd have thought if this was an issue - it wouldn't go past POST at all and begin beeping like crazy!)
To muddy the waters still further, as a experiment, I installed an old radeon card for test (a crappy Sapphire hd 2600 pro PCI-E version), which is about the same age as the rest of the system.
I couldn't find the drivers disk initally, so downloaded the relevant ones from Sapphire and AMD. Got EXACTLY the same problem as above: it looks as the drivers have installed but no Directx support (which is daft as I used to use that card games until I could afford to replace it with the 8800)
I tried everything I could think of for hours (including disabling driver signing security, stopping anti-virus software, trolling through the windows/ inf, System32 and System dirctories to weed out anything ATI - you name it) then miraculously found the old drivers for the HD 2600. Installed them with no probem at all - everything worked just as it should!
So, I looks to me like the XP drivers on the web are now garbage. Anyone else have similar problems or know of a workaround?
I'm not exactly rich so can't afford Win 7 or the dreaded Win 8 (which I loath) or a new PC, which is why i'm soldering on with this dinosaur!
The only thing I haven't done is splat Windows and do a clean install, do you think that'll help? If so why did the old radeon drivers work (win has been cleanly re-installed many a time since I last used that card, so there was no legacy junk lurcking in the windows diectory or it's registry)
Do you think I'd have better luck with NVidia? If so could you kindly recommend an alternative from them? I know an R7770 is a bit OTT for such an old system, but they are dirt cheap at the mo and not much more expensive than much less powerful cards.
Anyone have any thoughts about UBuntu? If it is a driver issue or there is no workaround, I may need to consider this route. Trouble is none of my legacy games will run on Linux and i'm not sure virtualization is available for my mboard.
Anyways, thanks for your time and for any suggestions you might make
Regards
Mike

Hi Flex, thanks for the quick reply and for the advice.
In the end i got it going by changing the boot.ini settings.
They were initially set with the /3GB /fastdetect switch to force the WinXp kernal to run in 1GB, and not take up 2GB as is it's default.
It was set that way to stop a 32bit game (KSP) crashing every 10 minutes or so, through lack of addressable memory.
All I did was simply set the boot.ini back to its default and directx sprung to life. I reset it back to 3GB to make sure it wasn't a fluke and as soon as I did, it killed directx again.
Maybe its a driver issue afterall - probably lack of proper XP support by AMD (This dosen't happen with the old- - 2008 vintage - version 4 ATI radeon drivers.) or perhaps its because the card has twice the memory over my old cards and therefore needs to access a higher portion of I/O allocation than is available in 32bit WinXP.
Its all a bit ironic really as i'm finding the R7770 runs like crap under dirx9 - i'm getting about 30% the frame rate of my old Nvida 8800GT and, as I can't use the 3GB switch anymore, it crashes every 5 mins or whenever I play any resource intensive game.
As the crashes are caused by lack of available address spaces under 32 bit systems, I've bitten the bullet and got 64bit Ubuntu. Got this working in the wee small hours last night - including the R7770 using the AMD catalyst drivers for Linux. Hopefully that will sort things out (and gimmie an excuse to learn a proper OS!)
Wish me luck i can see another "steep learning curve" on the horizon!
Cheers
Mike

Win 7 Pro x64 Error 0x8007046a: Not enough server storage is available to process this command.

I installed Win 7 Pro x64 on a reasonably decent machine (Nvidia nForce 680i SLI, core 2 duo, 4 gig ram). It was a clean install on a freshly formatted partition. While copying a large bunch of files from another machine on the LAN, I get "Error 0x8007046a: Not enough server storage is available to process this command." It does give me the option to retry and continue, but the error inevitably pops up again later during the copy. Googling the error, I found a reference to it, suggesting I go to the registry and increase the IRPStackSize (but this article was not specific to Win 7). I tried increasing it as high as 32 hex. This reduces the frequency of the error, but does not eliminate it completely. Also, I now see a new error sometimes that says, "Too many files are currently in use. Quit one or more programs and then try again." That's odd, because I don't have anything else running. I haven't seen these errors when copying files to different partitions on the machine, so I assume it's something to do with network.

Hi,
To troubleshoot the issue, please try to do an In-Place Upgrade to repair the system.
1. Start the computer by using the current Operating System.
2. Insert the Windows 7 DVD in the computer's DVD drive.
3. Use one of the following procedures, as appropriate:
If Windows automatically detects the DVD, the Install now screen appears. Click Install now.
If Windows does not automatically detect the DVD, follow these steps:
a. Click the Start Button, type Drive:\setup.exe in the start search box and then click OK.
Note: Drive is the drive letter of the computer's DVD drive.
b. Click Install now.
4. When you reach the "Which type of installation do you want?" screen, click Upgrade to upgrade the current operating system to Windows 7.
Thanks,
Novak

Win xp Pro and card will not w

I had a sound blaster li've with win 2k and it worked fine. The comp is a AMD 64 bit 3200+ with msi K8n Neo board, gig of ram, etc I recently upgraded to win xp and the card does not work. I bought a newer card, audigy, in hopes that it might be newer and compatible with XP. Guess what...not a chance. I have been on phone 3 times with Creative Labs and got a quick fix each time after a 30 minute hold and none have worked. I have thus far:?-installed-call?told turn off all virus software-reinstalled with virus software all disabled-call?2 told to do clean install-done clean install-call?3 told to download windows media-downloaded windows media SDK 9.5-reinstalled clean again-still not working?when i run diagnostic it tells me that the card passes but midi driver, wave driver, etc all fail. I have seen this as a constant problem, but have not seen a real solution. Anyone have any ideas?

Expand what you mean by 'does not work'
Does it show in device manager?
Have you got the latest drivers installed via the creative website?
Do you get ANY sound be it via mp3 or cd or a movie?
Right click on the my computer icon
select manage
expand the system tools - event viewer - and look in application and system tabs for any sound related errors.
After you did a clean install of xp did xp pick the soundcard up in device manager or did it say unknown device? Did you install the drivers from a supplied cd or via creative website?

Updating Palm TX to 32 bit Win 7 Pro from XP: use XP mode? Or Win 7?

I am really good at making fatal errors with technology and my Palm is too critical to risk, so I bought a 32 bit laptop, with Windows 7 pro and XP mode installed.
I have scoured the forums but all I can find are problems/solutions with 64 bits (which is what scared me off in the first place of course).
First, should I install in XP mode? Or will installing in Win 7 in a 32 bit computer go smoothly?
Second, can I safely use my original disc with the 4.2 version of Palm Desktop?
Finally, for my peace of mind, would you kindly check my checklist for errors or omissions or danger zones.
1) synch the device to Palm desktop
2) backup to my SD card with NVBackup
3) Open XP mode - or do not open XP mode as you recommend
4) install Palm desktop (from disc or download as you recommend)
5) enter the same user name as on the device/ xp computers
6) change conduits to Handheld overrides desktop
7) synch with the cable. Make tea. Be calm.
8) check data on handheld and on desktop for errors.
9) When somewhat confident all is well, return conduits to synchronize except for Backup which stays as Handheld overrides desktop. (nor sure why, but it is the default I guess.)
Thanks,
Muddling
This question was solved.
View Solution.

Hey! You have Win7... I'm still using Vista64 as my most modern PC OS!
To turn off UAC - go to the Control Panel/Users/Turn off User Account Control.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

How to run a 32 bit program in xp mode on a 64 bit win 7 pro OS

I have a program that must be used with XP. However my laptop has 7 pro. How do I install and run this program, if possible?

As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios.
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to
follow it up. You can also choose to unmark the answer as you wish.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members
facing similar problems.
Thanks!
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Since i upgraded to FF4 Beta. The suggestion bit in my Google toolbar, works but not when you click on a suggestion?

It gives suggestions but when you click on them nothing happens they just disappear.

Hi satorilori-
You might try this:
-> Clear Cookies & Cache
https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
-> Clear the Network Cache
-> Reload web page(s) and bypass the cache.
Press and hold Shift and left-click the Reload button.
Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
Press "Cmd + Shift + R" (MAC)
Check and tell if its working. Hope that helps!

WIN XP PRO compatibility - retail OEM (not restore OEM) VS full retail box?

I was under the impression that Boot Camp will only allow installation of Windows XP Pro 32 bits RETAIL, that is the full install copy purchase in store and not an OEM copy.
Then, I realised there is confusion between:
-OEM from a retailer to go in a custom PC
-OEM used to restore a DELL, HP, or other purchase computer
I fund two different Windows XP Pro 32 bits that are 150$ difference:
OEM from online store (just the CD) such as,
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=25718 30&CatId=672
vs
RETAIL version (full boxe) such as,
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=11049 19&CatId=672
Please clarify if you can.

Brun:
Please click [HERE|http://www.newegg.com/Product/Product.aspx?Item=N82E16832116511] and you will see that it is an OEM version however cheaper than the links you proposed.
You right. OEM Installations will work as long as the user understands that the license (once activated) will only work on the first computer that it is installed and is not transferable. The link above is an example of this. These installations disks are bought directly and do not accompany any computers.
The other OEM version is the version that come with branded disks such as DELL and HP etc. This will not work and will almost always fail installation.
Then there is the FULL retail version where the license is transferabe from one computer to another as long as it is only used on one machine at a time.
Axel F.

Just installed FF4. No menu button, no app tab, no bookmark button. How do I get these to display?

I just downloaded and installed FF4. Why are the features highlighted in "Getting started with Firefox" such as the menu button, the app tab and the bookmark button not being displayed?

# By default the Firefox button is hidden in XP. To get it, right click a toolbar and uncheck "Menubar"
# To make a tab an app tab right click a tab and select "Pin as app tab".
# To have the Bookmarks button display, right click a toolbar, and select Customize... In the dialog box that appears, drag the Bookmarks button to a toolbar.
Check out the Screenshots below for reference.

Macbook pros Internet Settings will not take my WEP key as my password.

I just purchased a new Macbook pro. I looged into the Macbook Help
Connecting to the Internet using AirPort ( since it says I have the Airport card).
My current situation:
1.) I currently connect to the internet through my Verizon DSL router.
2.) My current router is setup with a WEP key and SSID.
3.) There is also a MAC filter setup for my router (every computer on my wireless network has it's mac address in the MAC filter).
NOW My New Macbook pro:
A.) It says I have an AirPort card in my computer, and I decided to connect to the Internet wirelessly by using my wireless network that's connected to the Internet.
B.) It tell me that my wireless network that I'm joining is protected by a password I will need to enter it before I can join the network.
My Question:
• What does the Macbook mean by "password"?
• Does it equate password with my current WEP key (note: All my other computers need to join the network is my WEP key)?
• Why wouldn't it take my WEK key when I type it in?
• Am I choosing the wrong network setup? I chose the DSL-modem. Should I choose the LAN instead?
Please help!!
Excited New Mac user

Many wireless routers expect the WEP key to be a hexidecimal number. Instead of choosing WEP Password under the Wireless Security pop-up menu, Choose WEP 40/128-bit hex. Hope this helps.

When somebody facetimes me, only my iphone 4 rings. I have recently bought a Macbook Pro, 13" and im not sure how to get my mac to ring aswell as my iPhone!?

Something has really been bugging me. Two days ago i bought a Macbook Pro. I like to facetime my family since they live abroad. Well when a family memeber rang my facetime, i realised that only my iphone rang and not my macbook, i waited for a while to see if it just needed time to introduce the call, however this didnt work out. I was wondering if anybody can help me sort this problem...
Thanks

see
http://support.apple.com/kb/HT5538
mac 101
http://www.apple.com/support/macbasics/
also
http://support.apple.com/kb/TS4185

Windows 8 64 bit Home - Network properties: An unexpected error occurred. How to solve this???

Hi all,
Does anybody know how to fix this problem:
When clicking for my network properties, I receive "an unexpected error has occured" message. Network works fine, however this problem is annoying
my OS: Windows 8 64 bit Home
Have already tried some stuff to fix this but nothing seems to help:
reregister the Netshell.dll file & Ole32.dll
Anybody?

Hi,
Regarding current situation, I suggest we follow these steps to check the issue:
Since you got 64 bit Windows 8, we need to register files in SysWOW64 by pressing Windows key + R and type below command line one by one:
regsvr32 %windir%\SysWOW64\netshell.dll
regsvr32 %windir%\SysWOW64\ole32.dll
If we cannot get this issue fixed, please run System file checker to repair DLL files:
Please open command prompt by right-clicking the CMD and choosing Run as administrator. Type following command line:
SFC /SCANNOW
If any error message appear after the scan is finished, please post here or try to manually replace the corrupted system files from installation or recovery DVD.
In addition, if SFC fail to solve the issue, please test the issue in Clean boot mode and let me know the results:
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
If the issue doesn’t appear, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check
half of the problematic half services.
Look forward to your response.
Kate Li
TechNet Community Support

FF4.0, 32 bit Win 7 Pro, toolbar settings, bookmarks not saved. How to solve?

Similar Messages

Maybe you are looking for