FI & PA document amount mismatch

Hello All,
I am getting different amounts piosted in FI & the relevent PA document. there is goods return transaction for one customer.
Amount is posted in Co code currency in FI & when I am going to the PA document through KE24 transaction code I am getting different amount but in same company code currency. All the other inputs are same is quantity rate etc.
can any one came across this situation?
Can any one tell me why this is happening only in case on this credit memo.
Regards,
Prashant

Hi Prasanth
In your case the Sales Returns GL account is not assigned to the PA Transfer Structure.
Here you need to assign the sales return Gl Account [Cost Element} to the source structure which is done in the configuration settings done for Profitability Analysis.
In profitability Analysis under flow of actual values followed by direct postings from FI/MM under which you need to maintain the PA Transfer Structure.
Regards
Murali Kanth Natti

Similar Messages

  • Difference between local amount and document amount in the same currency

    Dear All,
    Why different between local amount and document amount with the same currency in some FI document line items? Both currency is 'TWD' and update currecy(BSEG-PSWSL) is 'USD'.
    What is the purpose of update currency(BSEG-PSWSL) and update amount(BSEG-PSWBT) ?
    Does update curreny cause the difference mentioned above?
    Thanks all in advance.
    Best regards,
    SAP user

    Dear Sir,
    Thanks for your kindly response!
    These fields of the FI document header are following:
    Local currency 1(BKPF-HWAER) : TWD
    Local currency 2(BKPF-HWAE2) : null
    Local currency 3(BKPF-HWAE3) : null
    Document currency (BKPF-WAERS) : TWD
    Transcation currency means which field ?
    Transaction code (BKPF-TCODE) : FB1S
    The line items as following :
    Itm PK Account    Account  short text   Amount
    1   40   21302500  A/E-Maintenance     1,119,350
    2   50   21302500  A/E-Maintenance     1,119,350-
    Amount in document currency is 1,119,350(TWD) but amount in local currency is 1,087,998(TWD).
    The line item's additional data :
    Amount for Updating in General Ledger : 33,894.02(USD)
    Thanks a lot !!
    Best regards,
    SAP user

  • Payment wizard does not allow to increase Document Amount

    Hi Experts,
    I'm am trying to overwrite document amount in step 6 of Payment wizard but in SAP Business One 9.0 PL 11 is not possible to increase the original Amount of Document, it is possible only to overwrite with a minor amount.
    Is that correct ?
    Thanks a lot.
    Veronique

    Hi,
    There's a business rule on the system that you can set on BPs (max amount on payment on BPs)
    You can perform partial payments but only by decreasing amount and not increasing when you have this set
    Thanks,
    D

  • Goods Receipt Material Document Amount in LC

    All:
    I am working in ECC 6.0.
    Sometimes the GR Material Document Amount in LC is not calculated as expected. In some instances, the Amount in LC uses the PB00 amount instead of the expected Net Price (which is adjusted for copper). I have not been able to figure out trends in when the Amount in LC is calculated as we would expect and when the Amount in LC is not correct.
    I do strongly believe this is not related to currency conversion as we are dealing with USD in all of the currency fields.
    Can anyone please explain: How the Amount in LC is calculated (what fields/dates are part of determining the Amount) & Why we are seeing a discrepancy of how the Material Document Amount in LC is calculated?
    Has anyone experienced the same issue? How did you resolve it?
    Thank you in advance for your assistance.
    ~Stacy

    are you following the approach given in OSS Note 24738 - Precious metal surcharges in Purchasing ?

  • Need to calculate Document amount based on below conditions

    Hi Everybody
    Here I need to calculate Document amount based on below conditions in the report iam having all the fields.
    1)     If the Net Due Date is one or up to tens days less than the document date on any open AP item
    2)     If the Net Due Date is "equal to" or "less than" the next month end date on any open AP item
    3)     If the Net Due Date is "one day more than" the next month end date on any open AP item
    4)     If the "GR posting date" + "payment in days (no of days)" is "one day more than" the next month end date
    5)     If the Net Due Date of any open AP item is in Jan., Feb…Dec, place the document amount in Jan, Feb...Dec month
    6)     If "Payment date > net due date" from 11 to 30 days add amount
    Pls write ur comments if any userexits pls forward to my id
    [email protected]
    Thanks in Advance
    Chaitanya

    you can have parameters to pass the points and you can use this inside query to filter and return the required data from query. You can then use this dataset inside chart and plot the points.
    http://www.grapefruitmoon.net/ssrs-2008-using-the-top-filter-in-a-chart/
    http://blogs.msdn.com/b/florianmader/archive/2013/08/10/sorting-a-chart-by-values-in-ssrs.aspx
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Depreciation Run - Amounts mismatch

    Experts,
    I just ran the depreciation run for all the assets in a Co Cd, which created a document. The document currency, Local Currency and Group Currency for this Co Cd is all USD - However, when I checked the document posted by depreciation run, the Group Currency amounts are different from the LC and DC/FC amounts.
    I checked the OB22 setting and it looks ok - The Exchange rate used is same for determining LC and GC.
    Can someone let me know how this can be corrected ?
    All answers/thoughts/inputs/views will be duly appreciated and rewarded with points.
    Thanks,
    Nandita
    PS - We recently upgraded to ECC 6.0 (technical upgrade) from 4.6B

    Hi Nandita,
    the mismatch amount will get because of " % change or depreciation key change for asset".
    so u have to run AFAR ( recalculate depreciation). for diff amount.
    Regards,
    R.N.Reddy

  • GR IR amount mismatch

    Hi Guys,
    Therer is a mismatch in the GR and IR amount. The quantities are the same. However, the system is not clearing when i run F.13.
    All the criteria maintained in OB74 are matching. Still the system does not clear? How can this be achieved .
    Thanks,
    Kris.

    Hi ,
    The issue is that on the GR/IR account there is an amount of XX during MIGO and during MIRO on the same GR/IR there is an amount of YY.
    Hence both the amounts on the GR/IR is not the same. We would like to clear this GR and IR.
    That is the issue.
    Thanks
    Kris..

  • FI document  amount of material documents of movement type 413

    Hi
    When I create a material document (413) transfer post from sales order stock to another sales order stock. SAP automatically generate a FI documents. So, my question is that the amount of FI document is how to be calculated?
    thanks
    Henry

    Hi,
    Please check below link which will provide solution for youe query. Thanking you.
    How to get print out for MIGO doc with movement type 701, 702 and 551, 552

  • F.01 & FBL3N amounts mismatched at Company Code Level

    Hello Gurus,
            At Client side, we are facing problem of mismatch in FBL3N & F.01 Report for some GL accounts and this is at Company Code level not Profit Center or Segment Level.
            I have also verified the Master Data of GLs which are having problem but these accounts master data are same as that of GL accounts having tallied amount in both reports, I have already check on all the posts as this is frequently asked Question but all the replies for those are not given proper solutions.
    Please suggest me for this Error.
    Thanks & Regards,
    Rajdeep.

    Dear Randeep,
    If you are on profit center accounting ECC 6.0. Then Fbl3n cannot be matched with F.01( which runs on profit enter level).
    you need to match F.01 with FAGLL0(Zero)3. provide profit center in dynamic selection and give open item as on as per the period you have provided in F.01.
    This will certainly match.
    kindly provide points, This would solve your issue.
    Ashok kumar

  • Depreciation Run - Amounts mismatch in Doc

    Experts,
    I just ran the depreciation run for all the assets in a Co Cd, which created a document. The document currency, Local Currency and Group Currency for this Co Cd is all USD - However, when I checked the document posted by depreciation run, the Group Currency amounts are different from the LC and DC/FC amounts.
    I checked the OB22 setting and it looks ok - The Exchange rate used is same for determining LC and GC.
    Can someone let me know how this can be corrected ?
    All answers/thoughts/inputs/views will be duly appreciated and rewarded with points.
    Thanks,
    Nandita
    PS - We recently upgraded to ECC 6.0 (technical upgrade) from 4.6B

    Can u plz provide the ob22 company code settings.

  • Decimal Problem in Document Amount..

    Greetings for the day,
    In table amount showing properly. I mean decimal showing only 2 digits but
    in my document it is showing 3 digits. Earlier it was worked properly but
    since today morning I am facing this problem. I checked in T.code OY04
    there is no option for 2 decimals hence I haven't maintained local currency
    with any of the available options(1,3 or 5). So how to set in document
    decimals as 2 digits?
    Kindly revert me back as soon as possible with your valuable suggestions.
    Thanks & Regards,
    Vinod.

    Just check in OY01
    SU3 - User profile
    Do not give anything in OY04 - I have checked for my currecny GBP. I don't even find my currency in OY04
    It seems this setting is not needed
    Thanks

  • Query on DFKKOP - cases of amount mismatch in BETRW and PSWBT

    HI,
    First I have query that is there a possibility that in DFKKOP - BETRW and DFKKOP - PSWBT can be different.
    If yes, what could be the scenarios?
    More importantly, I want to write query in SQVI to find such cases where DFKKOP- BETRW and DFKKOP - PSWBT are different.
    Can I write below query or I have to developed separately as ABAP report?
    Regards,
    Paresh

    Hi,
      Yes, that is certainly possible. We have many cases in our Prod system where PSWBT is zero and BETRW is not.
    I'm not sure what the scenario is.
    I don't believe you can write such a query in SQVI, as you can't join a table onto itself. But maybe there's another way?
    cheers
    Paul

  • Amount in FI document is not updated .

    Dear Guru ,
    We have one requirement which is need to specify the amount value during the Goods Receipt ( Tcode : MFBF ) .
    And we checked in SAP there has one BADI called MB_DOCUMENT_BADI seems can meet our requirement , however it can change the local amount in MSEG table finally , But it didn't effect the FI accounting document , the FI document is still using the amount which is calculated by SAP .
    By FM "BF_FUNCTION_FIND" , we found there have one more BTE function "1050" is invoked during the FI document generating , but it didn't work for the FI document amount changing .
    Any good idea to change the FI document amount ?
    I will appreciate if you can provide some useful info to us .
    Many thanks .
    Best Regards,
    Carlos

    Hi
    There is no option if you are not on EhP4... Do MIRO and see if the FI doc is generated
    Only way is to do MIRO immediately after MIGO.. OR Schedule ERS (Evaluated Receipt Settlement) which runs every hour in the background so that MIRO is posted automatically based on MIGO document.... Basically, you have to do MIRO after MIGO.. Whether you do it manually or through ERS is a matter of choice
    Regards
    Ajay M

  • Local, Document and Third Currency Driven Amount?

    Guys, in the presentation and RPD layer, i see local, document amounts for just about every Fin Analytics subject area.
    What if the we want to have a "reporting" currency in EURO (example only). How do we expose that column into presentation layer?
    I see no "Global" column in the RPD except the following:
    Global Currency Code --> Currency Attributes
    Balance Global1 Amount --> Facts - GL Balance
    What about something like "Global Amount" which show data in EURO.
    Thanks for any pointers.

    HI,
    The currency codes for the GLOBAL currencies are set in DAC configuration. See section "3.1.2 How to OCnfigure Global Currencies" in the "Oracle® Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users Version 7.9.6.1 " manual if you are on 7.9.6.1 or 2 or the same section in the 7.9.6.3 version of the manual if that is appropriate.
    This goes through how to set your Global Currencies so they are populated correctly in the datawarehouse.
    For example if you set Global1 to be EUR then your Balance Global1 Amount --> Facts - GL Balance presentation column will be in EUR.
    Alos in ither financial SA's the GLOBAL1 amount is used as the amount e.g. AP Amount -> Facts AP Transactions. If you look at the Logical source for this it's computed from the GLOBAL1 columns.
    Hope this helps.

  • How does convert document to working cmyk after adjusting in profile mismatch dialog box?

    When there`s a profile or policy mismatch dialog box here,there`s an option about adjust the document to match current colour settings.But when the assign profile doesn`t match the working space,the check box of "convert document to working cmyk after adjusting"can choose.
    But question come out,when I check the box,I find the profile auto turn to working cmyk profile,there`s nothing to do with the assigned profile I chosen.
    So when to choose this option?why not directly choose the working cmyk profile?
    some more questions.about the "placed content"option,I`m not quite catch the meaning of the options.such as "keep existing assignments"."disable all profiles"."enable all profiles".Can anybody answer me?

    If I make a document with Color Settings' CMYK policy set to Off like this:
    Save and close the doc then change Color Settings to this:
    When I open the document the mismatch dialog tells me the document has no profile assigned while the current policy is set to preserve (the Off policy meant no profile got assigned).
    Clicking Adjust... lets me change the document's policy from Off to the current Preserve Embedded and choose the profile I want to assign which can be any available CMYK profile including the current working space. 
    A document's profile assignments can also be changed via Edit>Assign Profiles..., but the document's policy can only be changed from the Mismatch dialog
    If I click Adust... the profile I choose from Assign Profile is now the document's profile:
    Which is confirmed when I open Edit>Assign Profiles...

Maybe you are looking for