FIELD BNKA-XPGRO IN IDOC CREMAS03

Hi all
   In 46C, we populate IDoc cremas03 with data bank.
   When we entry the IDoc, an error occurs:
   "Field bnka-xpgro not allowed" .
   It occurs because we are sending this field and it   does not belongs to the screen.
   what can I do?
   Thanks

Check your config (IMG) settings if the field can be available for input.
Hope this helps.
Bipin

Similar Messages

Updating Standard comm type in vendor master idoc- CREMAS03

Hi all,
We have requirement of processing inbound vendor master data.We are using CREAMS03 idoc type as our system is 4.6C.
While updating venor master in general data we are not able to update the field Standard communication type.
Can anybody help me to find out which is the field needs to be filled to update the standard comm type in vendor master?
if this field is not present in CREMAS03 then do we need to customise our idoc???
if partner system sends this field in some other balnk field then how to map this field in BDC??? is there any enhancement?
I am using process code CRE1 which is calling IDOC_INPUT_CREDITOR function module.
Please suggest.
Thanks in Advance,
Raghavendra

I buy your point.
I will create WHT Type for WHT Code - Individual and WHT Code - Others.
But still there will be an issue since WHT Code will be different Non PAN and With PAN (within Individual). So still this will be an issue.
How to control this now.
=
Meena

Field Mapping of CREMAS05 IDoc..!!

Hi Gurs ,
Iam trying to map the following fields in CREMAS05 Basic IDoc Type but unable to find the correct mapping field segments in the IDoc.
Fields need to be mapped are:
1.Building Code
2. Pan No
Can anyone suggest me which segment and field i need to use for the above fields mapping..? or if i extended my idoc with some custom table how i will map into Standard field .
Thanks .
Hemant Gulati(A1)

Hi Jurgen ,
Thanks for Reply .
Vendor Master Idoc CREMAS05
i have extended my idoc with some zfields . in zfield i have Building code and Pan no
like zbuild and zpanno i need to map these in ADDR1_DATA-BUILDING and J_1IMOVEND-J_1IPANNO respectively .
Thanks & Regards
Hemant Gulati(A1)

SEGMENT FOR WITHOLDING TAX DATA FOR IDOC CREMAS03

Hi all!
Is there any segment for withholding tax data when creating creditor master data with IDoc CREMAS03? I need an other IDoc for this purpose?
Thanks in advance
Zapla

Dear Atul,
In function module AC_DOCUMENT_CREATE there is the structure
T_ACCWT to pass the calculated tax items. In the
BAPI_ACC_DOCUMENT_POST the corresponding BAPI structure has been added
with release 6.0. For older releases it is posssible to pass the
withholding tax items in structure EXTENSION1 and map it to T_ACCWT
using a customer exit or the Business Transaction Event RWBAPI01.
For the corresponding IDOC ACC_DOCUMENT the same holds.
From release 6.0 on there is the IDOC segment E1BPACWT09 for
passing WT information, in older releases E1BPPAREX
can be used to pass the extension data, see note 487722.
I hope this can help You.
Mauri

Error: Field BNKA-BNKLZ . is not an input field

Dear Experts,
My client following vendor creation process is as follows
Requestor logs his request into EP -> it is recorded into MDM -> after approval from central team, it syndicate into SAP -> Idoc entry -> Table entry
Now in case of vendor request comes with bank data, Idoc gets failed with error message u201CField BNKA-BNKLZ . is not an input fieldu201D
Message no. 00347
Diagnosis:
A transaction is processed using batch input.
System Response:
The runtime error field xxx occurs (invalid entries)
Procedure:
Correct the batch input data. Depending on the processing scenario, this can affect either of the following objects:
Batch input session
CATT procedure
Application program
If I reprocess this Idoc in foreground mode in Tcode: WE19 it is getting successfully posted.
Kindly help me to resolve this issue.
Regards,

Can it be that you have bank data in your vendors for banks that are not yet created.
if you create vendors manually then SAP is creating the bank master record automatically in background if not present when you entered bank data in the vendor master.
But in IDOC processing, SAP just focus on the master data transferred with the IDOC, it creates vendor masters, but it does not create central address data nor bank data.
you have to create the banks as a preceeding step to vendor creation.

Ship to party PO number line item field updating in ORDERS IDOC

Hi Experts,
We are in the process of creating the Sales order by receiving EDI data from customer and converting in to IDOC format and trying to create the sales order. While executing the ORDERS IDOC message type sales order is getting created successfully.
But our requirement is, we want to store the customer contract details in the sales order. So we identified the "Ship to Party Purchase Order data" in ORDERS Tab in the sales order. While executing, in the Header level the Contract number is getting updated against Ship to party Contract number field.
But during item level process, system is not updating the contract line item number field even though we maintained the value in E1EDP02-ZEILE for the QUALF 044.
Note: The similar scenario, we want to capture the Customer Purchase order number & line item number. For this we maintained the value in E1EDP02-ZEILE for the separate QUALF, its working fine.
Kindly give your valuable feedback on this issue also
Regards,
nag

Hi
See Note 753153 - FAQ: Customer-functions in IDOC_INPUT_ORDERS. Check if EXIT_SAPLVEDA_001 gives you any possibility to do it.
I hope this helps you.
Regards
Eduardo

How to change field values AFTER Inbound IDOC Posted successfully

Hi SAP Experts,
In my project I receive the inbound IDOC PORDCR05 from PI and posted as an Purchase Order in ECC.
I create the Z process code and Z function module (which is a copy version of IDOC_INPUT_PORDCR) and complete all the necessary configuration steps. It works perfectly.
My problem is: I have to collect some inbound idocs (that satisfied some criteria) and change the value of field EKPO-TXJCD and EKKN-KOSTL of the PO AFTER it posted successfully (means the purchase order is created and save in database).
How can I do this? I've try to put the logic code in Z function module, but it does not work, since at that time, the Inbound IDOC is not updated to the database yet.
Aprreciate your advise.
Regards,
Elaine.

Hi Elaine ,
as per your cretiria pick the idocs and take created PO# from status 53 & use the BAPI (BAPI_PO_CHANGE) to change the neccessary values in the PO. We can't reprocess those idocs again.
Reddy

Multiple IDOCs based on multiple fields in File to IDOC mapping

Hello Experts,
     I have a requirement to create multiple IDOCs based on multiple fields.
     Earlier my requirement is to create IDOCs based on ShipID (i.e., for every ShipID new IDOC...I achieved this).
     But now the requirement was to create IDOC based on two more fields like
Source:
     ShipID1
     FieldA with value1
     FieldB with value1
Target :
     1 IDOC to create
and If
Source:
     ShipID1
     FiledA with Value2
     FiledB with Value2
     ShipID1
     FiledA with Value1
     FiledB with Value2
Target:
     2 IDOCs based on FiledA
Like wise IDOC should create for every change in FiledA and FieldB.
If FiledA and FiledB has no changes then create IDOC based on ShipID
please help me in achieving this as this is an urgent requirement.

Hi Prasad -
Just concat all the three fields - shipID1, FieldA and FieldB and
remove contexts
split by value (value changed)
collapse contexts
This way whenever there is a change in any of the above fields you'll have separate IDOC..

How to populate extended fields of VENDOR MASTER IDOC (CREMAS05)

Hi,
I have appended a new field to table LFA1 and the same has been placed on the screen. I have extended the basic IDOC type CREMAS05 to accommodate the newly added custom fields. Now when the vendor is created using IDOC how to populate these custom fileds. As the standard IDOC FM is using BDC to create the vendor. Please help.
Thanks,
Satish

SAP uses function module ADDRESS_INTO_PRINTFORM
this has usually 10 lines for the complete address, so that it fits into the window in an envelope
If you address has more than 10 lines, then SAP reduces this lines to 10, by skipping some of them.
Read details in docu:
http://help.sap.com/saphelp_nw04/helpdata/en/18/c042e1da4811d3b571006094192fe3/frameset.htm
(open the menu on the left to navigate to the fomatting of the street.

Question w/ mapping header text fields from the ORDERS05 idoc - Need help!!

My mapping seems to be combining two header texts categories(IDs) and putting in into the XML target field. That's the first issue.
The 2nd issue is trying to figure out how to only use only a part of the tdline.
The idoc value is: <TDLINE>232828-0 06/25/2009 EDI Vendor Confirmed</TDLINE> .
I only want to use the first part: 232828-0 and ignore the rest(
06/25/2009 EDI Vendor Confirmed).
Would someone have 30 mins to help a newbie out.
I can send screen shots of the idoc coming into PI and the XML file going out as well as my mapping for the field.
Thanks,
Jeff
jschreiber@ballhort .com

Jeff,
I have sent a test email pl send me screenshots.
Issue 2: Did you try to use standard function for texts i.e "substring". Open the mapping in editing mode and all the way down you can see "Function" from where you can choose std functions.
-Sid

Missing IDOC field in XML after IDOC reimported in ESR

Hi Guys,
I have just reimported my IDOC in ESR wherein an additional field is added.
However, when I test a message, the IDOC field is missing in the XML payload upon entering PI even though I have entered a value in the IDOC.
Flow:
SAP ECC > PI
I have also already updated my message mapping. I'm not sure if I have missed any steps after importing the IDOC in ESR.
Could you please help me on this issue?
I'm using ICO by the way.
Thanks and Regards,
Neil

Hi Neil,
As Shanthi said you need to update metadata but since you are using ICO you need to do it in NWA.
NWA->SOA->Monitoring->IDOC Adapter Monitoring
Regards,
Praveen.

Field BKPF-BVORG in idoc not processed

hi,
we are using idoc-type FIDCC2 for posting FI-documents.
In the idoc we have filled field BVORG. when the document is created BVORG is empty and not taken from the idoc.
does anybody have an idea ?
best regards, Martin

Correct. At least one BSEG-BUKRS (there could be multiple line items in BSEG) should be different from BKPF-BUKRS for the field BKPF-BVORG to have any value in it. When you post cross-company code document, you initiate the posting in one company code and system posts two accounting documents (assuming there are two company codes in question) - one in the initiating company code and another in the second company code in question. The value in BKPF-BVORG in the initiating company code document is the document number + initiating company code + last two digits of the fiscal year. The same value gets stored in BVORG of the header record of the second company code document as well. Please note that the BELNR in the second company code can be different from the BVORG, since that BELNR is determined from the number available in the number range of that second company code. In case of the first company code, the BELNR is same as the first 10 characters of BVORG.
The value in BVORG "links" the accounting documents in the two (or more) company codes involved in the cross-company code business transaction. There is no BVORG in BSEG.

ALE: mapping IDoc fields to change document fields - TBD22 for ADRMAS iDoc

Hi,
I am currently try to find a table or way to extract the information of the TBD22 table (ALE: mapping IDoc fields to change document fields) for the iDocs/ Message Types:
ADRMAS
INTERNAL_ORDER
PROJECT
I am looking for a table that shows me to which SAP R/3 tables and fields the segments and fields of the above mentioned messages will be mapped to.
When I add one of the above mentioned message types to the table TBD22 selection criteria I always receive the notification: "No table entries found for specific key".
Could anybody determine Which table I have to use or why I cannot extract this information?
Thanks in advance!
Best regards

Hi,
Since we can not map the target IDOC when any of the field changes using nodefunctions , you can write UDF and check the same i.e if field1 changes or field2 changes or field3 changes then trigger new IDoc. This is one of the options that you can try...please try it once.
Regards
Priyanka

File to IDOC (CREMAS03)

Hi Experts,
I am trying to load Vendor data in the R/3 system, I got stuck up when I am trying to do mapping between file and IDOC, how can get CREMAS03 Idoc into XI.... Please help
Thnx
Raj

Hi Raj,
You have to import the metadata for SAP Interfaces(IDocs,RFCs) into XI Repository before you can use them in the mapping.
You can import the Idocs into your own SWC but as a best practice, these Idocs were imported into SWCs like SAP APPL, SAP BASIS etc. In this way there is no duplication of these Interfaces in multiple SWCs.
To Import the IDOC metadata
1) Edit the SWC.
2) Make sure you have the "import of RFC and Idoc interfaces from SAP systems permitted" radio button selected with connection data for the backend R/3 system.
4) In the SWC, on the left panel select the Tab "Imported Objects". Provide the connection data if asked for. Select the Idoc CREMAS.CREMAS03 and import it.
5) This imported Idoc will be added to the list of Idocs in "Imported Objects" Tab. Verify the structure of the Idoc before using that in your mapping.
Hope this helps.
Regards,
Sam Raju

Status field into order response IDoc

Hello friends,
We have a problem in order response Idoc. The order response Idoc contains all the data from a sales order except the fields Order status. In the screen VA03 --> Header Info --> Status we can see the delivery status fields, but it is not present in ORDRSP IDoc. The technical detail to the corresponding field data is VBSTT-LFSTA_BEZ. We just want to include this field in the order response IDoc.
Please help
f.kökce

Hi there,
In IDOC structure WE30, in the IDOC segments add a new segment through 'extensions' if you need a separate segment for status. Give the field mappings to the segment with the help of an ABAPer.
If you want to include the filed in the existing segemnt ask your ABAPer go add the field VBSTT-LFSTA_BEZ into an existing segment.
Hope this helps.
Regards,
Sivanand

FIELD BNKA-XPGRO IN IDOC CREMAS03

Similar Messages

Maybe you are looking for