Field for release indicator
Hi All,
I would like to execute piece of code only while releassing the billing document through VF02. For which I am using the user Exit
EXIT_SAPLV60B_004. But I am not able to find the field which I can use to check for release indicator.
Could you please suggest?
Thanks
Saurabh
Hi,
check if this works since you will get the condition record nu. in ur exit. using this get the release status from KONP.
SELECT SINGLE KFRST
FROM KONP
INTO XXX
WHERE knumh = xkomv-knumh.
Regards,
Vasanth
Similar Messages
-
Transparent table field for Tax Indicator on Material Master
I am trying to find the transparent table which holds the Tax indicator field for material in the purchasing view of a material master. Usually it has values - 0,1. Where is this field stored ? I am unable to locate it. I looked into CDPOS..It points to DMLAN. But that is a structure..
TAXIM is the field ( Tax Ind. f. Material). I need to retrieve this field for a report).Hi,
The country is got based on the plant...you can get the country from T001W for the corresponding plant.
Thanks
Naren -
Table field for Assembly indicator
Hi,
What is the table in which the assembly indicator (BOM) is getting stored?
Regards,
Charumathi.BHi,
Check table STPO and field is STKKZ.
You can check out this link for BOM related tables-
http://www.sap-basis-abap.com/sappp007.htm
Regards,
Sujit -
Mandatory field for ABC indicator
Hi,
I would like to make the ABC indiator field to be mandatory on MM01 and MM02 transaction. I've tried to config this under SPRO and OSM9 but couldn't find the right group or object. Do you have any steps that can help me on this?
Thanks,
Tai<b><i>Background info.
The values of the field selection groups have been preassigned as follows:
001-110 Material master for industry
111-120 Reserved for customers (except where the values are already in use)
121-150 Material master for industry
151-210 Material master for retail
211-240 Reserved for customers</i> </b>
Step by step
1. Transaction code OMSR. Change Selection Group to 211 for example. Save.
2. Transaction code OMS9. Enter 211 into Field sel. group. (MARC-MAABC now should be in a list of fields).
3. Double-click the relevant field reference. Say MM01.
4. Change MM01 to required.
5. Save.
Message was edited by: Vyerah Yende
to correct spelling
Vyerah Yende -
Purchase requisition report via Release indicator
Dear All,
I would like to know if there is any standard report in purchasing that has the functionality to display purchase requisitions by their release indicator.
ThanksHi,
You can use table EBAN wth FRGKZ Field for Release Indicator.
You can t.code:ME5A and click Dynamic Selection and select "Subject to Release" in Purchase Requistion in Application Toolbar and execute to get the report for your PR's.
1.Enter "YES", It will give report for the PR's which are not Released.
2.Enter "NO" ,it wil give report of the PR's which are Released
Regards,
Biju K -
Table Field for total value release in Contract agreements
Hi Gurus,
Please tell me the table field for release in contract agreements. It is showing a structure field RM06E-GSABW, which does not have any associated table.
Please let me know if any other way to get the same information.
Thanks,
Shibaji.Hi Shibaji,
you may try in the respective delivery LIPS-NETWR. Or check the where-used-list of data element NETWR.
Regards,
Clemens -
Hi ...
I was referring to MM table doc , in that it is mentioned table EBELN & EBELP are for Purchase Order header / Line and BANFN & BNFPO are for PR header/ Line.
But for release strategy ...people told me to refer CEKKO for PO and CEBAN for PR.
does it mean that release strategy refers to different tables for execution ( and I believe these tables are used for release strategy purpose only and if Yes then at what point PO / PR data gets updated in these tables)
Regards
SureshHi,
Please find release tables used in MM.
EKAB Release Documentation
EKEH Scheduling Agreement Release Documentation
EKEK Header Data for Scheduling Agreement Releases
T161E Release Codes
T161F Release Point Assignment for Purchase Requisition
T161G Release Prerequisite, Purchase Requisition
T161H Fields for Release Procedure, Purchase Requisitio
T161I Determination of Release Strategy
T161S Release Indicator, Purchase Requisition
T161U Texts for Release Indicator
T163P Release Creation Profile
T163S Description for Release Creation Profile
T16FB Release Indicators: Purchasing Document
T16FC Release Codes
T16FD Description of Release Codes
T16FE Descriptions of Release Indicators: Purchasing Do
T16FG Release Groups
T16FH Descriptions of Release Groups
T16FK Release Statuses
T16FS Release Strategies
I think, it will help u.
Ishu -
Hi All,
What are all the Tables associated with the Release Process.
Advance thanks
Regards
ArjunEKAB - Release Documentation
EKEH - Scheduling Agreement Release Documentation
EKEK - Header Data for Scheduling Agreement Releases
T161E - Release Codes
T161F - Release Point Assignment for Purchase Requisition
T161G - Release Prerequisite, Purchase Requisition
T161H - Fields for Release Procedure, Purchase Requisitio
T161I - Determination of Release Strategy
T161S - Release Indicator, Purchase Requisition
T161T - Texts for Purchasing Document Types
T161U - Texts for Release Indicator
T163P - Release Creation Profile
T163S - Description for Release Creation Profile
T16FB - Release Indicators: Purchasing Document
T16FC - Release Codes
T16FD - Description of Release Codes
T16FE - Descriptions of Release Indicators: Purchasing Do
T16FG - Release Groups
T16FH - Descriptions of Release Groups
T16FK - Release Statuses
T16FS - Release Strategies -
Field Selection Key In Release Indicator For PR
Hi,
Can you explain what is the use of Field Selection Key in Release indicator for PR on what basis to select this value.
regards,
zafarHi
Field selection key directs which values can be changed after the relevant release indicators have been set
Eg suppose you want to supress the field for PR after first release indicator has been set you have to assign the relevant field selection key to Release indicator
you can assign the same to the release indicators in
spro-mm-Purchasing -PR-Procedure with classification-set up Procedure with classification-release indicators
you can set the field selection key in
spro-mm-purchasing -PR- define screen layout at document level
Regards
Sandeep -
What is the table field for PO releaser in R/3 (4.7 Enterprise)?
Hi Gurus out there:
Do you know if there is a table field for PO releaser in R/3 (4.7 Enterprise)?
We use for e.g. the transaction ME29N to release a PO and I haven't been able to find a DB table where the PO releaser is stored.
In DB table EKKO I can find the fields FRGGR (Release group), FRGSX (Release strategy), FRGKE (Release Indicator), FRGZU (Release status) and FRGRL (Release Not Yet Completely Effected) but no information of the user who released the PO.
Many thanks in advance.
/hwHi
<b>Have you tried reading the details of the PO Releaser using the BAPIs ?</b>
BAPI_PO_GETRELINFO
BAPI_PO_GETITEMSREL
BAPI_PO_GETITEMSREL List Purchase Orders for Release (Approval): New as of 4.0A
BAPI_PO_GETRELINFO Display Detailed Release (Approval) Information on Purchase Order
BAPI_PO_RELEASE Release Purchase Orders
BAPI_PO_RESET_RELEASE Cancel Release of Purchase Orders
<u>Related link -></u>
Re: How to fetch data from back end for PO?
Hope this will help.
Do let me know.
Regards
- Atul -
Table field for PO releaser in R/3 (4.7 Enterprise)
Hi Gurus out there:
Do you know if there is a table field for PO releaser in R/3 (4.7 Enterprise)?
We use for e.g. the transaction ME29N to release a PO and I haven't been able to find a DB table where the PO releaser is stored.
In DB table EKKO I can find the fields FRGGR (Release group), FRGSX (Release strategy), FRGKE (Release Indicator), FRGZU (Release status) and FRGRL (Release Not Yet Completely Effected) but no information of the user who released the PO.
Many thanks in advance.
/hwMeanwhile I have found a solution to this problem:
CONCATENATE sy-mandt <ekko-ebeln> INTO tabkey.
SELECT SINGLE * FROM cdpos
WHERE objectclas = 'EINKBELEG'
AND objectid = <ekko-ebeln>
AND tabname = 'EKKO'
AND tabkey = tabkey
AND fname = 'FRGKE'
AND chngind = 'U'
AND value_new = '1'. " PO has been released
IF sy-subrc = 0.
SELECT SINGLE username
FROM cdhdr
INTO po_releaser
WHERE objectclas = 'EINKBELEG'
AND objectid = oitab-ebeln
AND changenr = cdpos-changenr.
ENDIF. -
Field Text is a required field for G/L account (VF02 release to accounting)
Hi gurus,
the following error message shows in VF02 when releasing to accounting:
"Field Text is a required field for G/L account in E178 (=CoCd) 4420000000".
We checked the G/L master (FSS0) - information tab - G/L Account texts in Company Code (for G/L 442*) but did not work. Any idea of which text is to be maintained?
Thanks,
VLhi,
this is to inform you that,
in SPRO - financial accounting - g/l accounting - master data - g/l accounts - preparations - addational activities - define screen layout for each transaction.
or
OB26.
make the field text mandatory and fill the data in it.
confirm
balajia -
FM for reset/release release indicator
Dear expert:
In my scenario,po has three release indicator A.B.C ordinally.
We can set release indcator from A to B or B to c etc....,only step by step.
For the business requirement,we want to set release indcator from A to C or C to A directly...
If there any function or FM can implement it?
I want to get your advice very much,thanks a lot.Hi,
For the release strategy for PO´s you have the suer exit: EXIT_SAPLEBND_002.
Best Regards,
Arminda Jack -
Release Indicator for Purchase Order
Dear All,
While we set release indicator for release of ourchase order, we select changeble ststus of Purchase Order during release.
As per standard if we set 1 - Not changable and after creation of Purchase Order release indicator set as "Blocked" which is having changable status as "1-Not Changable", then also system allow to change Purchase Order.
Can anybodu suggest solution.Hi,
I think You are mistaken by terms itself.
well, whn u refer to CHANGEBILITY Indicator , it is only concerned to RELEASE STRATEGY ( applicable to that PO ) which may or may NOT change automatically based on characteristic value changes in PO.
But this changebility indicator doesn't refer to PO Change control.
Pl don't get confused regarding control excercised by this changebility indicator. -
Purchase order table for Release
Dear All Expert,
Is there any table for PO where I can find out the release indicator and who made relase, etc.
Thanks & B.Rgds
Bishnu
05/07You can find the release indicator in EKKO field "FRGSK" and information about who released in table CDHDR by passing Object "EINKBELEG" and Object value as the PO number . . from CDHDR you will get the change document number , TCODE used for release "ME29N" and the user name. YOu cna pass the chnage document number to CDPOS table to get releease status as well.
Regards
Raviraj
Maybe you are looking for
-
Emails going into "Junk" folder
The default junk folder is called "Junk Email" however this one user has "Junk" folder above that in which only emails that he receives from linkedin.com go in there. My first thought was that he has a rule sorting linkedin.com emails into that fold
-
Correlation set problem with different messages
Hi. I have process with two receive activity correlated by correlation set. But second receive wait for different message as initiation receive. I created correlation set <correlationSets> <correlationSet name="OrderCorrelationSet" properties="ns1:or
-
Hi, Can we have page navigation in portlet? What I mean to say is, can we have a link inside a WSRP portlet page (A JSF page actually) to navigate to a different JSP/JSF page within the same portlet container? Seems like it only refreshes the same pa
-
How to start JMS Grid daemon as Windows service
In JMS Grid 5.1.x documentation (3.2.3 Starting a Daemon), the preferred way to dameon on Windows is to start as an NT Service. But I couldn't find the way of doing this. Does anyone know if and how this can be done? Thanks in advance!
-
I recently update to the latest iOS 7.0.4. My phone rebooted fine but when I went back to my homescreen the settings icon still displays a badge with the number 1 on it. When I go to Settings > General > Software Update it displays iOS 7.0.4 Your Sof