Field Group settings for MB21 and MB22

Dear Friends,
Can someone guide me how can i perform changes to grey out certain fields on the transactions MB21 and MB22 for reservations.
Appreciate your quick assistance.
Thanks
KP

Hi,
You can use OMBW and configure the field selection for certain movement type. This will also
be reflected in MB21.
Thanks and regards,
Polly

Similar Messages

How to apply group settings of UDF and UserDefinedValues to all documents ?

I have made many User Defined Fields, category group settings of UDF, and User Defined Values (Formatted search) in a marketing document.
And I want to apply them to all of the marketing documents, that is Sales and Purchase documents,,, all the same.
Is there any way to achieve it?
Thanks in advance...

Thanks,,
This thread it not about setting for different users but for different type of documents.
And is there any way to configure the category settings of UDF for document types by SDK coding?
Edited by: Sung-Su Beck on Nov 29, 2011 7:27 AM

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

"Table Name" in customizing SUS:"make field control settings for tables"?

Hi Gurus,
In the following customizing node, I can find the table name such as :
     ORDER.DET.EDIT
+     ORDER.DET.VIEW+
+     ORDER.HISTORY.DETAIL+
+     ORDER.ITEM.EDITH+
+     ORDER.ITEM.EDITL+
+     ORDER.ITEM.EDITL.WO.OR+
+     ORDER.ITEM.EDITM+
+     ORDER.ITEM.EDITM.WO.OR+
+     ORDER.ITEM.EDITS+
+     ORDER.ITEM.EDITS.WO.OR+
+     ORDER.ITEM.VIEWH+
+     ORDER.ITEM.VIEWL+
+     ORDER.ITEM.VIEWL.WO.OR+
+     ORDER.ITEM.VIEWM+
+     ORDER.ITEM.VIEWM.WO.OR+
+     ORDER.ITEM.VIEWS+
+     ORDER.ITEM.VIEWS.WO.OR+
+     ORDER.LIST+
+     ORDER.SDLN.EDIT+
+     ORDER.SDLN.VIEW+
It's difficult to know the difference for these so-called "table name"...
"SAP implementaion --> supplier relationship management --> supplier self-service --> settings for user interface --> make field control settings for tables"+
What's actual meaning for these table names? Where can I find related document and actual corresponding transparent tables for these so-called talbes?
Thanks and best regards
Jack

Hi Neelima,
Thanks a lot.
Checked the SAP note, but I could not find corresponding infomation about that, kindly please advise again.
Best regards
jack

How to How to get FI field status settings for General data

Hello All,
Can you please tell me How can I achieve field status settings for General data.
I have some code to get field status settings for account assignment block but I need General data block data.
Can you please help me with the same.
I got the below code to get field status settings for account assignment block But I need General data block information.
FUNCTION z_fieldstatus_getdetail.
*"*"Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_BSCHL) TYPE BSCHL
*" VALUE(I_BUKRS) TYPE BUKRS
*" VALUE(I_SAKNR) TYPE SAKNR
*" TABLES
*" T_COBLF STRUCTURE COBLF
*" T_FIELDS STRUCTURE TCOBF OPTIONAL
*" EXCEPTIONS
*" ERROR_MESSAGE
* liefert Feldstatus in Liste t_coblf:
* Feldname (DDIC) nicht in der Liste -> Feld ausgeblendet
* Feldname (DDIC) in der Liste -> Feld eingabebereit
* required = 1:
* Mussfeld;
* required = 0: kein Mussfeld
* active = 0: Feld ausgblendet
* Als Hilfstabelle wird die gesamte Feldliste der Felder (t_fields)
* ausgegeben,
* deren Eingabebereitschaft im Customizing steht
DATA: ls_faus1 LIKE tbsl-faus1.
DATA: ls_faus2 LIKE tbsl-faus2.
* Feldstatus holen
CALL FUNCTION 'FI_FIELD_SELECTION_DETERMINE'
    EXPORTING
      i_bschl     = i_bschl
      i_bukrs     = i_bukrs
      i_saknr     = i_saknr
    IMPORTING
      e_faus1     = ls_faus1
      e_faus2     = ls_faus2
    EXCEPTIONS
      customizing = 1
      OTHERS      = 2.
IF sy-subrc <> 0.
    MESSAGE a613(/ssc/comon).
ENDIF.
DATA lv_char.
DATA int_coblf LIKE coblf OCCURS 0 WITH HEADER LINE.
DATA p_cobl LIKE cobl.
DATA: dummy_ktosl LIKE bseg-ktosl.
PERFORM kontierungsblock_ermitteln(sapff001)
TABLES int_coblf
USING lv_char(1)
ls_faus1 ls_faus2 dummy_ktosl.
t_coblf[] = int_coblf[].
SELECT * FROM tcobf INTO TABLE t_fields.
ENDFUNCTION.
Thanks in Adv.
Kaustubh

Hi ,
Looking at the question the first thing that comes to my mind is what is the organization structure that you are following .
As you have mentioned that you have used segment insted of profit center for splitting , what is the scope of profit center in your implementation .
in implementations where locations are devided as profit centes it becomes very necessary to mandatorily split the documents based on profit center .
in your case as you have set it as segment i dont find it an issue of you keeping it as optional as it will not give you and error during your operations , as you have made profit center optional in splitting charcteristics .
hope this suffices .
Regards ,
Dewang

Make Flash Plug-In for Firefox Remember Privacy Settings for Camera and Mic Access on Local File

My company is using Flash Player to develop some kiosk-style applications to run on a standalone computer (no network connection). This computer will contain web pages containing Flash content. They will be opened from the local HD with Firefox with the Adobe Flash plug-in (v11.7.700.224). One of the applications accesses the microphone hooked up to the computer. When this application is started, it always asks for permission for "local" to access the microphone and camera. In previous versions of our system, we could click "Remember" if we did it once and that would make it so it wouldn't ask for permissions again (in this case, the Remember option isn't available, and the site settings don't even offer the Privace tab). However, in the previous case, we were running IE with a previous ActiveX Flash version (unfortunately, this approach is no longer available as we have had to switch to Windows 8 and that changes the game with IE and Flash entirely).
At this point, we have tried to use the Global Settings for "Camera and Microphone Settings by Site..." to enter "Local" as an always allowed site. This does not seem to have any effect. We also tried entering the root directory of the applications in "Trusted Location Settings", but that also seemed to have no effect.
I'm not sure what has fundamentally changed here. I think there might be some differences in the Plug-In version (compared to ActiveX), but I'm not sure what they might be or how to do the same thing as before.
Any help would be appreciated. Thanks in advance.
Torrey

Chris,
We learned that the Privacy tab (in Settings) can be found under the Flash plug-in for Firefox, but only if Firefox is running under an administrator.
Unfortunately, we haven't had much luck with the mms.cfg file. The following was used in the mms.cfg file (placed in both the %WINDIR%\SysWow64\Macromed\Flash and %WINDIR%\System32\Macromed\Flash” directories):
AVHardwareDisable = 0
AVHardwareEnabledDomain = local
AVHardwareEnabledDomain = 127.0.0.1
AVHardwareEnabledDomain = localhost
AutoUpdateDisable = 1
The AVHardwareEnabledDomain settings seem to be getting ignored regardless of whether the user is a standard user or an administrator. I also checked to make sure it wasn't just a local problem by going to a website that uses a microphone (http://www.testden.com/accent-reduction/systemcheck.htm). Adding the requested domain to the list (AVHardwareEnabledDomain = train.act360.com) still didn't bypass the allow/deny dialog box.
We know that the mms.cfg file is being read because setting "AVHardwareDisable = 1" will result in no prompt and that section being greyed out in Global Settings. I saw a post that suggested this setting was required to even make the AVHardwareEnabledDomain work, but it seems to block the local entirely and still brings up the dialog query on the internet site.
Thanks,
Torrey

I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto. My iCloud email works ok otherwise. I have check all mail settings for ID and password.

I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto. My iCloud email works ok otherwise. I have checked all mail settings for ID and password.

In the iPhoto preferences ==> accounts delete the account and re-enter it - sometimes that resolves this
Or IMHO the best long term solution is to set Apple Mail as the iPhoto e-mail client in the iPhoto preferences and use it - it has a number of advatages and has fewer problems
LN

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

Business Partner Field Grouping Config for BBPMAININT transaction

Hi,
Vendor from ECC (6.0) are replicated to SRM (5.0) via the standard vendor replication program BBP_VENDOR_SYNC. In SRM, I want to hide/suppress some fields (ie: tax numbers) on the business partner transactions BBPMAININT and BP. I tried to acheive this via Business Partner Field Grouping config, and it works for BP transaction but it does not work for BBPMAININT transaction.
Does anyone know how to hide/suppress fields for BBPMAININT transaction?
Reference to Field Grouping config:
SPRO -> Cross-application oomponents -> SAP Business Partner -> Business Partner -> Basic Settings -> Field Groupings -> Configure Field Attribute per Client
Thanks,
Susan Wang

Hi,
See the foll threads for more pointers:
Vendor Master Extension in SRM
Business Partner Custome Fields Mandatory
BR,
Disha.
Do reward points for useful answers.

ITunes says registry settings for importing and burning CDs or DVDs are missing.

i get a message after installing itunes 10.7 that registry settings are missing for importing and burning CD/DVDS. Says probably due to installing other burning sofware. Re-install ituenes. I never installed anything between the older 10.6 and the new 10.7........just updated when it said new Apple software was available. The update process seemed to delete the 10.6 install and then re-install a new version of itunes, 10.7. Then the registry settings error message started coming up each time I start itunes. What's the proper way to re-install?
Thanks for any suggestions.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Settings for Cash and liqudity report

Hi, all
As per your response i have done all the setting and i cheked FF7A and FF7B for cash and liquidity forcase but still i am not able to get the Persons line items in that report for M1, M2 and s1, i am ble to view only F1 line item.
M1 means Purchase requisition
M2 means Purchase Order
S1 Means Sales order
Here i am able to generate only F1 line item detals only F1 means posting of purchase and sales
i have created Planning group and assign in Customer master and vendor master
i want to gererate report for M1 M2 and S1 line items in Person column
Kindly give quick responce on the above issue
thanks
Kiran

Hi Hein,
Thanks for your reply!
As per your response i have done all the setting and i cheked FF7A and FF7B for cash and liquidity forcase but still i am not able to get the Persons line items in that report for M1, M2 and s1, i am ble to view only F1 line item.
M1 means Purchase requisition
M2 means Purchase Order
S1 Means Sales order
Here i am able to generate only F1 line item detals only F1 means posting of purchase and sales
i have created Planning group and assign in Customer master and vendor master
i want to gererate report for M1 M2 and S1 line items in Person column
Kindly give quick responce on the above issue
thanks
Kiran

Regional and Language Settings for Window and BEX Style

Hi All,
When I change the Regional and Language Settings for Windows, Standards and Formats value to English (USA) the standard Style for BEX is active. For instance, input-ready cell is bordered with blue. But when I switch to Turkish this style is not active.
Additionally, I have to change Style for each Workbook one by one. How can we adopt a style to every workbook.
Regards,

Lars,
This is a setting on the 'Defaults' tab in the User Profile. This can be set when a new user is set-up in SU01, or it can be changed by each user according to personal preference in SU3. I'm sure there is a system table where these settings are stored that could probably be edited for all users, if that is desired, but I don't know which table that would be off the top of my head.
Hope this helps...
Bob

I have selected "Use custom settings for history" and pressed "OK" but it defaults back to "Remember history", how do I stop this?

I have to enable cookies in order to have an online purchase credited to my mileage account. So, I opened Firefox Tool and selected Options then Privacy. There, I changed "Remember history" to "Use custom settings for history," as, this will achieve what I am trying to do. However, when I press "OK" the box jumps back to the Privacy box and I see that "Remember history" is still the setting. What steps do I take to prevent the Privacy box from defaulting to "Remember history" when I want to change that setting to something else?

The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
"Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
Do you have a problem with the cookies?
You can inspect and manage permissions for the domain in the currently selected tab via these steps:
*Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
*Click "More Information" to open "Tools > Page Info" with the Security tab selected
*Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Master/Slave settings for HD and SuperDrive

i recently updated the hard drive to a 17" usb2 iMac flat panel, I upgraded the standard 80GB HD with a new maxtor 250GB disk, the problem is that the transfer rate from dvd/firewire/hd to hd are superslow.
what i don't know is the jumper settings for the two units, i used slave for the superdrive and master for the hard drive, is it possible that they go inverted?
thanks
g

I don't know if that's causing the low data rate, but Apple sets the superdrive to master and the harddrive cable select (see http://developer.apple.com/documentation/Hardware/DeveloperNotes/Macintosh_CPUs-G4/iMacNov03/index.html). I know from own tests that the 17" iMac G4 is capable of 50 MB/s for the internal HD.
Mac mini G4 1,42/512/80, PowerBook G4 12" 1,5/1,25/80 + 23" ACD Mac OS X (10.4.7) as well as iMac G4 17" 1,25/2/320, PM G3 DT 500/576/20 + 17" Syncmaster 710T

Field Group settings for MB21 and MB22

Similar Messages

Maybe you are looking for