Field is not known for condition accesses - While save sales order

Hi Gurus..............
I am getting error while i save my own sales order that Field is not known for condition accesses. Then the screen automatically come to SAP Easy Access screen
Pl let me know
Thanks in advance

Hi Selvi,
try this way, once you enter the required data for the sales order go to item conditions screen. Click the analysis button and see the conditions determined. You would find some of the condition deriving a value and some may not. It will give details as to how the records either determined or whats missing to determine. Make analysis for the conditions that you feel should have got determined by going to VK13 if everything is correct. Else try maintaining with VK11. Now it would tell you if any field/ condition table is missing which was initially constructed as part of the access sequence for this conditino type.
regards
sadhu kishore

Similar Messages

Field KOMP-ZZPRCTR1 is not known for condition accesses"

Hello friends,
In a sales order if I put the material I got the error below.
"Field KOMP-ZZPRCTR1 is not known for condition accesses"
I am not able to incert that perticular material into sales order.
Kindly suggest how to go ahead.
Regards,
Kunal

Hi,
You need to add the new field ZZPRCTR1 in the KOMP structure using SYSTEM MODIFICATIONS
Please check the system modifications for this
http://www.sap-img.com/sap-sd/add-a-field-to-new-condition-table-in-pricing.htm
regards,
santosh

How to manual maintain TAX condition value while creating sales order

Hi
I am creating one Tax condition suppose JLST without access sequence .
while creating sales order I am manually maintain the % value of TAX. suppose it is 1%
then I see It show some value in TAX .
save that sales order & creating delivery document for that but when I create Invoice its show error.
" Tax code in procedure CMTAXP is invalid ".
I know the configuration only for Tax condition with vk11 condition record .
BUT now I want to maintain TAX condition at the time of creating sales order.
so I remove the access sequence of that condition .
but It shows tax code error while billing.
My main question is that If i maintain condition record while creating sales order then how i can assign Tax code .
Can it is possible ?
if yes then How?
please help me.
thank you

Hi,
The "straight-forward" answer for Tax Code creation is contact the FI consultant. He shall help you, by creating Tax codes.
I have tested, with creating a tax cond type (copy of MWST) & manually entering values. I can create Sorder, Dlv and Bill but I cannot create an Accounting document. That is because of every line (amount) a Tax code is necessary.
I THINK, you can NOT have manually filled tax codes; access sequence is needed to get the tax value (%) and the Tax code from the condition record.
There is lot of material on the web to understand Tax classification, code etc. etc. See a useful link below -
http://www.sapgeek.net/2010/04/sd-determines-tax-code/
In short Tax code is a must and take the help of your FI consultant for the configuration of the same.
BTW - Tax code is already made created for MWST, therefore I suggested that you can use MWST. Furthermore, you can change the values corresponding to Tax codes in FTXP.
But if you are a beginner in these things, better take help.

SERVICE ORDER COST IS NOT FLOWING TO CONDITION TYPE EK01 IN SALES ORDER

hi all,
My requirement is that the cost incurred in service order should flow to the condition type ek01.
we will be running the transaction dp90 to calculate the cost for the resources used.
the cost are getting calculated at service order level but this cost are not flowing to the billing item being generated from dp90 in the billing request.
the settings that i have made are as follows: I have maintained the condition type ek01in the sales pricing procedure. are there any other settings required by me to make.
valuable answers will be be rewarded fullpoints.
regards,
ashish

Hi prince
Check out in Control data of Condition Type--PB00..Enter "NO Limitations" in Manual Entries. and check the 'Amout' and 'Value' and 'Delete' so that u can make changes to that condition type in line item in sales order.

SD- Sales Order - ATP check not working for few item in same sales order

Hi Experts,
Need help we activated ATP check but for few item i could not find confirmation qty after availability check. In same SO out of 4 items for schedule line it confirming qty for 2 item but it's not confirming for remaining 2 items though stock is available. Please guide me how to correst and what need to check.
Manoj

Dear Manoj,
As you know, ATP is a big subject & some times its difficult to point the exact problem.
In your case, I suggest you to execute the function module:BAPI_MATERIAL_AVAILABILITY using Tx:SE37
key in selection criteria , in results check the "ATPQTY"- it will show you how much actual stock is available for use i.e. ATP qtty.
still if you find the availability & system not confirming the qtty, then problem could be in checking rule
Tx:OVZ9 check in relevant combination, whether you are considering RLT or not?
is this case with MTS or MTO
because in Sales order -
for MTS - checking rule "A" & MTO checking rule will be "AE"
Regards,
Reazuddin MD

No condition update from the sales orders exist - VK322 Message

Hello All,
I have activated " Condition Index" & " Condition Update" flag for one of my discount condition type and then created it's condition record along with scales on three levels. The condition type which I mentioned above is set as " Value Scale" in Scale Basis for checking the document value and apply the applicable discount percentage.
I have created three sales orders wherein the discount percentage is getting applied as per my condition record ( so, the document value is getting accumulated and compared with the condition record correctly ) but when I try to check the cumulative values ( ctrl +shift + F4 ) from the condition record, I get information message " VK322" mentioned in the subject.
VK322 -
No condition update from the sales orders exist
Message no. VK322
Diagnosis
The following causes are possible:
1. There are no sales orders for the condition record that you selected.
2. Updating condition records in the sales order entry is not active.
Procedure
Concerning 1:
Check the sales orders created for the condition record that you selected.
Concerning 2:
Activate the updating for condition records in the sales order entry.
I have checked everything in SPRO for this but could not find anything which can give me a clue to resolve this problem, especially " Concerning 2" part of this message.
My requirement > To be able to see the cumulative values from condition record.
Also, in which table the accumulated values get stored?
Appreciate your expert advise on this issue.
Regards,
Hrishi
Edited by: Hrishikesh Bhalwankar on Sep 13, 2011 1:59 AM

Hello Everyone,
I would like to thank each one of you for giving valuable inputs in regard to my requirement and I would like to let you know that I am able to achieve the results as per the expectation.
I would also like to share some key things which I did ( with the help of all your expert inputs ) due to which the requirement is met:-
1. Activation of ' Condition Index, Condition Update' in V/06 for the discount condition type.
2. Maintained ' B - Value Scale' in Scale Basis for the said condition type in V/06 - my requirement was to check against a value to apply the necessary scale base percentage.
3. Activation of ' S071' info structure via OM01
4. Condition record maintenance as per the required scales.
4. Written a new routine to check the accumulated condition base value from S071 along with the current document condition base value.
5. Put this routine in ' Scale Formula' in V/06.
This is giving me the perfect results for the correct application of the discount.
Just last question - How to re-organize the S071 info structure as I tried to re-organize it with Standard Program ' RV15F001' but it is not re-organizing this info structure... Any idea on this?
Thanks a lot friends for all your advice...
Regards,
Hrishi
Edited by: Hrishikesh Bhalwankar on Oct 11, 2011 2:11 AM

Field name not known   in old existing report.

We have a report that we have used for a long time and has always been fine. Today when we open it it says data will be lost because "Field name not known".   So you click ok and look at the report in design and the report is missing a bunch of fields. You look at the Field Explorer and it only shows the first field in the table. This report links 2 tables. The linking field is the first field in both tables.
I try to re-map datasource and no luck.   I close Crystal, open Crystal and create a new report, look at the same tables and all of the fields are there. Create similar report looking at same datasource, same tables, some of the same fields, and it works fine.
What is wrong with the original report and why won't it connect or show fields?

It may be that the report file became corrupted. Do you have a back up of that report anywhere? If not you could create a new report using the same tables and links and then have both new and old reports open and copy objects from the old report to the new report. Save it and then verify it all works as it should and replace the old report with then new report. Copy the old report somewhere safe also.
Thank you
Don

Requirements are not fulfilled for condition EDI1

Hi Gurus,
We are trying to add (EDI1 confirmed qty) in the PO item conditions.
We are using the standard PO schema which has these condition type. It has no access sequence attached to it and hence it is a manual entry.
If we try to add that condition type in the PO it throws me the following error :
"Requirements are not fulfilled for condition EDI1
Message no. V1215"
Kindly let me know what I have to maintain at the earliest.
Best Regards,
Ravi.

You incorrectly filling item information with condition value. All quotation related pricing need to pass QUOTATION_CONDITIONS_IN table paramete of BAPI.
Try it and the problem get solved.
Cheers
Nilesh Shete

New DSO data fields are not available for transformations in the upwardflow

Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
Kannan

We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

Requirements are not fulfilled for condition PI01

Dear SD guru,
        When i create sales order,it prompt that 'Requirements are not fulfilled for condition PI01'.
          For the specifical requirement,i use the intercompany processing.I want two invoices in this sale document,onr for customer,the other for internal processing.So i need two condition types for two price,i use the condition type ZABC&PI01(for internal) in the pricing procedure.But,when i create sales order under the configuration,it failed.
      How can i solve the problem?
TKS!
Edited by: stephen chow on Sep 8, 2008 9:35 AM

We need to change the condition class from prices to other like discount or surcharge in the condition type.
For ex: If it is shipment cost document got to goto T_06 select the required condition and change the condition class and do not select grouping conditions..
Thanks,
ratna
Edited by: ratna edpi on Oct 24, 2008 6:04 PM.
Edited by: ratna edpi on Oct 24, 2008 6:05 PM
Edited by: ratna edpi on Oct 24, 2008 6:07 PM

Requirements not fullfilled for Condition type - Pricing Procedure

When I am doing the pricing procedure, the error thrown is "Requirements not fullfilled for Condition type". Can any one suggest how to fix this problem ?

Hi Sunil,
Please first of all check the condition type in Pricing Procedure. In condition type column check the requirement. Here conditon is, once requirement is fulfilled which you have mentioned in the condition type then only it will be executed. Take a help of ABAP'er regarding this requirement if it is customized requirement.
We should know the purpose of requirement in condition type.
Venkat.

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this?

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this? Thanks --

Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.

User Exit to check whether chapter id for Material and Plant combination is maintained while creating sales order

Hello all,
my requirement is, system should give error message while creating sales order, if chapter ID is not maintained for a material and plant combination.
please suggest the user exit.

Hi
CASE 1 : All Plants are excisable.
In Material master , Foreign Trade data tab- mentioned Control code field mandatory. ( i.e nothing but Chapter ID)
CASE 2 : Few Plants are excisable
In the Case 2 you need to go for Enhancement
Program Name : MV45AFZB
User Exit: USEREXIT_CHECK_VBAP ( Item Level Check )
By using above user exit you write a logic with the help of ABAPer
Plant and Chapter ID combination table : J_1IMTCHID

"Procurement Wizard" window opens for a particular warehouse while saving Sales Order

Hello All,
We have upgraded SAP B1 8.8 to SAP B1 9.0
My client is facing one of problem while saving Sales order using particular warehouse.
Actually client is having 4 warehouses (A,B,C,D) in which if they use one particular warehouse "A" for saving Sales order they are facing a issue. The scenario is here below:
1. Client selects all required details of sales order with along with particular warehouse "A".
2. On saving SO "Procurement Wizard" is automatically triggered even if procurement document field is unchecked in logistic tab of SO.
3. This is happening only for a particular warehouse "A". Whereas if I select other 3 warehouses (B,C,D) the system saves SO without trigerring "Procurement Wizard".
Client is using SAP B1 9.0 PL 08
We don't want this "Procurement Wizard" window to open for this. As we haven't selected any check box for "Procurement Wizard" so it should not open for a particular warehouse "A".
Do you think any issue with my warehouse or system settings? Please let me know.
Please refer screen shots.
Thanks in advance.

Hi Saurabh,
As per your Screen Shot, I think you have Add-on.
Please stop that Add-on and then check above Scenario.
Thanks
Regards::::
Atul Chakraborty

While creating sales order wrt quotation customer code field is in display

Hi all,
I am facing one problem, while creating sales order with reference to quotation customer code field is in display mode.
I am not able to change the customer code. But i want to change it accordingly.
Previously it was in changeable mode only but now it is not in changeable mode.
Can anyone please tell me the solution for this issue?
Thanks in advance
Babu

hi
is that happening only when you create sales order wrt quotation,try creating normal sales order and see whether customer is in changable mode
regards
senya

Field is not known for condition accesses - While save sales order

Similar Messages

Maybe you are looking for