Requirements are not fulfilled for condition PI01

Dear SD guru,
        When i create sales order,it prompt that 'Requirements are not fulfilled for condition PI01'.
          For the specifical requirement,i use the intercompany processing.I want two invoices in this sale document,onr for customer,the other for internal processing.So i need two condition types for two price,i use the condition type ZABC&PI01(for internal) in the pricing procedure.But,when i  create sales order under the configuration,it failed.
      How can i solve the problem?
TKS!
Edited by: stephen chow on Sep 8, 2008 9:35 AM

We need to change the condition class from prices to other like discount or surcharge in the condition type.
For ex: If it is shipment cost document got to goto T_06 select the required condition and change the condition class and do not select grouping conditions..
Thanks,
ratna
Edited by: ratna edpi on Oct 24, 2008 6:04 PM.
Edited by: ratna edpi on Oct 24, 2008 6:05 PM
Edited by: ratna edpi on Oct 24, 2008 6:07 PM

Similar Messages

  • Requirements are not fulfilled for condition EDI1

    Hi Gurus,
    We are trying to add (EDI1 confirmed qty) in the PO item conditions.
    We are using the standard PO schema which has these condition type. It has no access sequence attached to it and hence it is a manual entry.
    If we try to add that condition type in the PO it throws me the following error :
    "Requirements are not fulfilled for condition EDI1
    Message no. V1215"
    Kindly let me know what I have to maintain at the earliest.
    Best Regards,
    Ravi.

    You incorrectly filling item information with condition value. All quotation related pricing need to pass QUOTATION_CONDITIONS_IN table paramete of BAPI.
    Try it and the problem get solved.
    Cheers
    Nilesh Shete

  • Requirements not fulfilled for EK01

    Hi
    I'm trying to invoice some travel expenses (costs) in DP90 and i'm getting a message 'Requirements are not fulfilled for condition EK01' can anyone help.......
    Thanks
    Sara

    Refer & Check SAP Note 30903 - V1215: Requirements not fulfilled
    If a condition is entered manually and its requirement is not fulfilled, error message V1215 appears: Requirements are not fulfilled for condition Example: Inserting a condition type manually which is not used during automatic pricing due to the requirement not being fulfilled.
    Cause and prerequisites
    Change in function PRICING_CHECK (LV61AU08): * Bedingungen prüfen
    IF KOMT1-KOBED NE 0 AND INCL_KONDITIONEN NE NO.
    BEDINGUNG_PRUEFEN-NR = KOMT1-KOBED.
    PERFORM (BEDINGUNG_PRUEFEN) IN PROGRAM SAPLV61A.
    IF SY-SUBRC NE 0.
    MESSAGE E215 WITH KOMT1-KSCHL RAISING CONDITION.    "<-- Reason
    ENDIF.
    Solution
    Workaround solution: Since it mostly concerns conditions to which an access sequence is assigned but which is still to be entered manually, you should create an identical condition (apart from the name) which is only to be maintained manually and does not have this requirement. The source code should not be modified for reasons of consistency.
    OR
    Refer & Check: SAP Note 102060 - Exclusion when changing conditions manually
    Symptom
    If an exclusion indicator is set for a condition with a condition record and this indicator is called in a requirement assigned to it, the following procedure can cause the condition to exclude itself so that as a result of the error message no further processing is possible: After you manually change the condition affected on the condition screen, you carry out a new pricing and afterwards you change the condition again manually.
    Cause and prerequisites
    Field KOMP-KZNEP is not initialized correctly in function module PRICING_CHECK.
    Solution
    The error is corrected in Release 4.5A, an advance correction is attached.
    OR
    Refer & Check: SAP Note 668362 - Expected customer price /value with IDoc
    Symptom
    When you create a sales order via IDoc, the expected customer price or customer value can be assigned in segment E1J3P01. For this, condition types JED1 or JED2 are used. These condition types are set as dimension-dependent conditions by default (T685A-J_3ASZCO) and are thus created on schedule line level.
    If you change this setting in Customizing, these condition types are created on item level (see Note 191742). Now, if the price or the value have different values within one item in entry segment E1J3P01, it is not possible to create this condition on item level. The system generates error message V1215 'Requirements are not fulfilled for condition JED1/2'.
    Reason and Prerequisites
    The system behaves correctly. In this case, condition JED1 or JED2 would have to be created explicitly for the respective schedule lines because different values are assigned in entry segment E1J3P01. However, as Customizing was changed for these condition types, this cannot occur. Error message V1215 displayed in this case is, however, incorrect.
    Solution
    After the implementation of the advance correction, the system does not display error message /AFS/IDOC021 'Item condition JED1/2 for nnn is not identical in all schedule lines'.
    Hope it will solve your requirement.
    Thanks & Regards
    JP
    Edited by: J Prakash on May 20, 2010 9:23 AM

  • Rebate:condition requirement 24 not fulfilled

    Dear Sirs
    I am processing billing doc but rebate condition type is not activated at f2 billing type.
    I have maintained rebate condition type in pricing procedure.
    When i go through "Analysis" tab in sales order item condition level I found that there is message regarding rebate condition type was
    "condition requirement 24 not fulfilled" . I have gone through thread dated 2 feb 2011 raised by sapuser. I refer the same but not very much clear regarding the solution.
    solution suggested " when debuging it was found that pricing type changed from X to xx in copy control"
    now my queries are :
    1)  In which screen pricing type has to changed for copy control
    2)  What could be possible errors might come in case condition requirement not fulfilled in pricing procedure with reference to rebates  because there are about 5 types of rebates and all are having same requirement in pricing procedure
    Kindly help
    Regards
    KAPIL MORE

    Dear Ivano Sir
    Firstly extremely sorry to close these query so late and also thanks for giving me yours valuable time but henceforth i will see that i should give response to your feedback .
    Actually i have solve this query by debugging and understood.
    Could u please if possible kindly give me some inputs regarding user-exits.
    Regards
    KAPIL MORE

  • Requirements not fullfilled for Condition type - Pricing Procedure

    When I am doing the pricing procedure, the error thrown is "Requirements not fullfilled for Condition type". Can any one suggest how to fix this problem ?

    Hi Sunil,
         Please first of all check the condition type in Pricing Procedure. In condition type column check the requirement. Here conditon is,  once requirement is fulfilled which you have mentioned in the condition type then only it will be executed. Take a help of  ABAP'er regarding this requirement if it is customized requirement.
    We should know the purpose of requirement in condition type.
    Venkat.

  • Requirements not fulfilled for EK01 while running DP91

    Hi
    Time entry is done against the network ,cost is flown to the Project.When i run DP91 to create the debit memo for the project order it throws the error that "Requirement not fulfilled for EK01",
    Am i missing something... somebody can help.
    Thanks
    Alags

    Hi,
    Check settings in OPD4
    Here you have to assign EK01 condition to sales document.
    Kapil

  • R100 - Condition ignored (requirement 055 not fulfilled)

    Hello
    I have configured free goods as per the requirement of my client. But in the sales order Pricing Analysis R100 condition type is not triggering and getting the below error.
    R100 - Condition ignored (requirement 055 not fulfilled)
    The requirement 055 is assigned to this condition in the pricing procedure. This requirement was not met and so the condition was excluded from further processing.
    Can you please advise.....

    +In response to what _Sureshndk_ wrote:+
    Hi friends
    >
    > I found the solution for my error posted above. There was no problem in any of the settings. Its just a confusion.
    AMAZING! I was checking in the main item level Pricing analysis overview, thats why it was showing as R100 - Condition ignored (requirement 055 not fulfilled).
    >
    > But in the header lever and sub item (free good item) level R100 is triggering with out any error.
    >
    > Thank you guys....
    > Suresh
    Just request don't be in hurry to get you query solved quickly.
    Do a proper investigation before posting your query on Forum.
    As everyone will agree that, if the problem is not elaborate properly, we do make some assumption to provide solution.
    Finally, i would request you, "Try to respect others Time & Effort."
    Regards
    JP

  • K004     111     Condition ignored (requirement 002 not fulfilled)

    Hello Gurus,
    I have included K004 in v/06,v/08, and did all in ovkk and vk11, but still when created sales order I cant see K004. Upon analysis it says "K004     111     Condition ignored (requirement 002 not fulfilled)".
    The strange thing is when I am manually doing K004 it picks the data of K004 . I checked if it is checked manual, but it is not.
    Could you please tell, where I am going wrong.
    Note: I have tried with K005 it is working , means it comes in sales order, but not k004.
    Thanks,
    Ven

    hi,
    please maintain 2 in requriment field against in K004 and proceed.
    that means item with pricing.
    if it is not working ask ABAPER to debugg it.
    regarsd.
    balajia
    Edited by: balaji timmampalli achari on Nov 24, 2010 12:35 PM

  • Excise Details are not maintanied for Vendor 0000000957.

    Hi,
      As per our regular process  we are capturing inovie with J1IEX  and doing GR in MB01   now i have captured  invoice in J1IEX  and while making GR with MIGO i am getting error
    Excise Details are not maintanied for Vendor 0000000957. ,  but when i am making GR with MB01 i am not getting any error.
    also what configuration required to capture excise invoice and make Gr in MIGO,  as capture excise invoice menu is not coming in MIGO  in MIGO Exicse tab i can only see  only  refer excise invoice  ,  only part1 , no exicse registration.
    regards,
    zafar

    Hi,
    Do proper setings in Logistics - General -Tax on Goods Movements -India -Basic Settings -Maintain Excise Groups  - select your excise group and check settings in MIGO Settings such as EI Capture, Post EI in MIGO, Duty different at GR.
    Also ensure that you have maintained excise details for Vendor and Material in J1ID.
    Regards,
    Vikas

  • Exchange rate diff. accts are not defined for account 16145110currency INR

    Dear SAP Gurrus,
    I am facing a problem while making  payment against invoice, receiving payment against invoice, clearing advance payment and  advance receipts through T-code F-53, F-28, F-44 and F-32.  System is allowing me to select the invoices against which I want to do the clearing but when I go for simulation I am getting the following error -
    ' Exchange rate diff. accts are not defined for account 16145110currency INR'.
    When I click on the error message the performance assistant gives methe following details:
    Exchange rate diff.accts are not defined for account 16145110 currency INR
    Message no. F5062
    Diagnosis
    The accounts for posting the exchange rate differences could not be determined. For the specified G/L account and the specified currency key, no corresponding exchange rate difference accounts were determined.
    System Response
    The system cannot generate the exchange rate difference posting.
    Procedure
    By pressing ENTER, you achieve that the document is reset to a status without automatic posting. In another window, you can complete the default settings for exchange rate differences and post the document afterwards.
    Proceed
    My client is local. Even the local currency is set to 'INR'. There is no foreign currency involced while making invoices, payment and receitps.  Eventhough the system is giving me error.  As a result I am not able to clear open items. Please give me some feasible solution so that I can clear the open items.
    Thanks in advance
    Regards
    Shreyas Wani

    hi,
    As you said, you are not maintaining any Exchange rate differences, It may not be required a Exch rate Diffrences account.
    Please check whether you have created any Group / Parrallel curencies etc in co.code level.
    Please go through the notes 209580 / 89531, hope it helps you.
    Regards
    Kanna

  • How come I'm not asked for password for every app purchase, app auto downloads once I tap install, not good when my kids start buying apps because they are not asked for password, help!!

    How come I'm not asked for password for every app purchase, app auto downloads once I tap install, not good when my kids start buying apps because they are not asked for password, help!!

    Thank you for the help, have sorted it through Restrictions in General settings now : )
    No more mysterious app purchases on my c.card now thank god !!
    You would think they would set as default that Password was required - Imediatly . But they know there likely to get more purchases the way the default set it..
    Thanks again for prompt reply!!!

  • Expense reports are not processing for future date?

    hi folks,
    in our co.expense reports are not processing for future date, even though the end date is one month from now the expense reports are not getting paid.
    can anybody assist me to come out of this issue.
    thanks in advance,
    regards
    bhanu

    HI,
               Could you please share how to go  Debug mode in Dymanic program, I have scenarion in SAP HR , when Employee is hire , during the hiring action Infotype 32 is updating based on following conditions
    ********INSERT IT0032 FOR CANDIDATE ID *************
    P0001-PERSG<>'5' - True
    P0000-MASSN='01'/X
    P0000-MASSN='H1'/X
    P0000-MASSN<>'84'/X
    P0000-MASSN<>'86'/X
    P0000-MASSN<>'99'/X
    GET_PNALT(ZHR_CREATEP0032)
    RP50D-FIELDS <> ''
    INS,0032,,,(P0000-BEGDA),(P0000-ENDDA)/D
    P0032-PNALT=RP50D-FIELD1
    P0032-ZZ_COMPID='05' _ True
                  Infotype record is being created but there is no data in "RP50D-FIELD1 , so i tried to debug the  subroutine GET_PNALT(ZHR_CREATEP0032) as mention in Dynamic action, its not going in debugger mode.
    Do you have any Idea about how to debug the  program.  used in dynamic action
    Regards,
    Madhu

  • Output ignored (requirement 107 not fulfilled)

    Dear All,
    We set up a new confirmation controll for purchase orders. In test (output of message AUFB) we receive the message is not processed and we have for this message type the following message (Analyse output):
    AUFB     502     Output ignored (requirement 107 not fulfilled)
    What is this routine 107 and what have we to do to resolve this problem?
    Thank you for your help.
    Best regards,
    Thomas

    Hi,
    Goto SPRO > MM > Purchasing > Messages > Output Control > Message Determination Schemas > Define Message Schema for Purchase Order > Maintain Message Determination Schema: Purchase Order > Select Schema "RMBEF1" and double click on "Control data" in dialog structure, chcek for message tyep AUFB, requirement 107 i.e. Ord.Confirm.Dunning is assigned.

  • Field is not known for condition accesses - While save sales order

    Hi Gurus..............
    I am getting error while i save my own sales order that Field is not known for condition accesses. Then the screen automatically come to SAP Easy Access screen
    Pl let me know
    Thanks in advance

    Hi Selvi,
    try this way, once you enter the required data for the sales order go to item conditions screen. Click the analysis button and see the conditions determined. You would find some of the condition deriving a value and some may not. It will give details as to how the records either determined or whats missing to determine. Make analysis for the conditions that you feel should have got determined by going to VK13 if everything is correct. Else try maintaining with VK11. Now it would tell you if any field/ condition table is missing which was initially constructed as part of the access sequence for this conditino type.
    regards
    sadhu kishore

  • Reg : "Error multiple Receivers are not allowed for Synchronous calls"

    Hi All,
    Can somebody tell me why I am getting this error "Error multiple Receivers are not allowed for Synchronous calls" when I am using Synchronous Soap Request to WebService and the response from webservice is being sent to multiple receivers which are Business services based on Receiver determination condition(Services W/o Party).

    Hi , If you are simply looking up data (and not updating tables ) using RFC you can use RFC Lookup APIs to create a java mapping
    The source message has to be a RFC request message interface and target should be RFC response message interface.
    Also you can use three step mappings in a single interface mapping.
    1. from your request message to RFC request message mapping
    2. java mapping which will do the lookup and give you rfc response back
    3.rfc response to your target response mapping.
    PS: RFC lookup can be used if there are not may hierarchy in the RFC Response structure. (i.e. may be 3 or 4 level nesting permitted)
    To help you further
    The following is a link which gives you access to a ready made source code. you just need to compile it and create a jar and import the mapping in imported archive
    http://knowhowsapxi.synthasite.com/rfc-loolup.php
    Edited by: Progirl Progirl on Oct 31, 2008 1:33 PM

Maybe you are looking for