Field Storing 'AND'  & 'OR' values

hi Guys,
  This is an urgent requirement . I need a field and DB table which stores either 'AND'  &  'OR' values .
Thanks & Regards,
Santosh

hi Santosh,
You can use the dataelement/domain XANDOR as mentioned by Ferry Lianto.
This is used in tables USCRAUTH, USCRCOMID, USKRIA and USKRIAT.
But if you are looking for, where the values AND and OR are maintained, they are not maintained in master tables; instead they are maintained at domain level as 'Fixed Values'.
Hope this helps,
Sajan Joseph.

Similar Messages

  • ME21N - new field added and same value posted to it for all line items

    hi all
    i have added new field under item  level in me21n screen.
    data for new filed fetched from tables with values entered in header level material number.
    For one record, it is ok
    but for multiple records, same value is fetched for all line items
    i have written coding in screen exit for 0111
    and function exits EXIT_SAPMM06E_016 and EXIT_SAPMM06E_018
    how to solve
    pl help
    regards
    senthil

    MODULE STATUS_0111 OUTPUT.
    SET PF-STATUS 'xxxxxxxx'.
    SET TITLEBAR 'xxx'.
      if sy-tcode eq 'ME23N' or sy-tcode eq 'ME23'.
        LOOP at SCREEN.
          if screen-group1 ne 'PCS'.
            screen-input = 0.
            MODIFY SCREEN.
          endif.
        ENDLOOP.
      ENDIF.
      TYPES : BEGIN OF ty_cabn1,
             atnam TYPE cabn-atnam,
           end of ty_cabn1.
      DATA : itab_cabn1 TYPE STANDARD TABLE OF ty_cabn1 INITIAL SIZE 0,
             wa_cabn1 TYPE ty_cabn1.
      TYPES : BEGIN OF ty_cawn1,
        atinn TYPE cawn-atinn,
        atzhl TYPE cawn-atzhl,
        atwrt TYPE cawn-atwrt,
        end of ty_cawn1.
      DATA : itab_cawn1 TYPE STANDARD TABLE OF ty_cawn1 INITIAL SIZE 0,
             wa_cawn1 TYPE ty_cawn1.
      TYPES : BEGIN OF ty_cawnt1,
       pcs TYPE cawnt-atwtb,
        atinn TYPE cawnt-atinn,
        atzhl TYPE cawnt-atzhl,
        atwtb TYPE cawnt-atwtb,
          end of ty_cawnt1.
      DATA : itab_cawnt1 TYPE TABLE OF ty_cawnt1,
             wa_cawnt1 TYPE ty_cawnt1.
      TYPES : BEGIN OF ty_pcs1,
    pcs TYPE cawnt-atwtb,
      atwrt TYPE cawn-atwrt,
      atwtb TYPE cawnt-atwtb,
        end of ty_pcs1.
      DATA : itab_pcs3 TYPE TABLE OF ty_pcs1,
             itab_pcs4 TYPE TABLE OF ty_pcs1,
             wa_pcs1 TYPE ty_pcs1.
      TYPES : BEGIN OF ty_pcsn,
      matnr TYPE ausp-objek,
      ebelp TYPE dynpread-stepl,
      atwrt TYPE cawn-atwrt,
      atwtb TYPE cawnt-atwtb,
      END OF ty_pcsn.
      DATA : itab_pcsn TYPE TABLE OF ty_pcsn,
             wa_pcsn TYPE ty_pcsn.
      TYPES : BEGIN OF ty_ausp1,
         objek TYPE ausp-objek,
         atinn TYPE ausp-atinn,
         atwrt TYPE ausp-atwrt,
       END OF ty_ausp1.
      DATA : itab_ausp1 TYPE STANDARD TABLE OF ty_ausp1 INITIAL SIZE 0,
             wa_ausp1   TYPE ty_ausp1.
      DATA : param_name1(35) TYPE  c.
      DATA: progname1      TYPE sy-repid,
            dynnum1        TYPE sy-dynnr,
            dynpro_values1 TYPE TABLE OF dynpread,
            dynpro_values2 TYPE TABLE OF dynpread,
            field_value1   LIKE LINE OF dynpro_values1,
            ematn1         TYPE mara-matnr.
      if sy-tcode ne 'ME23N' and sy-tcode ne 'ME23'.  "psk
        clear : itab_cabn1,itab_cawn1,itab_cawnt1,itab_pcs3,itab_pcs4,itab_pcsn,itab_ausp1.
        clear : wa_cawn1,wa_cawnt1,wa_pcs1,wa_ausp1.
        if sy-uname eq 'IBM_ABAP'.
          param_name1 = '000000001'.
        else.
          param_name1 = '000000013'.
        endif.
        SELECT atnam
        FROM cabn
        INTO CORRESPONDING FIELDS OF TABLE itab_cabn1
        WHERE atinn  = param_name1.
        select *
        FROM cawn
        into CORRESPONDING FIELDS OF TABLE itab_cawn1
        WHERE atinn = param_name1.
        if itab_cawn1[] is NOT INITIAL.
          SELECT atinn atzhl atwtb
          FROM cawnt
          INTo CORRESPONDING FIELDS OF TABLE itab_cawnt1
          FOR ALL ENTRIES IN itab_cawn1
          WHERE atinn = itab_cawn1-atinn
          AND atzhl = itab_cawn1-atzhl.
        endif.
        if itab_cawnt1[] is NOT INITIAL.
          sort itab_cawnt1 by atinn atzhl.
          loop at itab_cawnt1 INTO wa_cawnt1.
            READ TABLE itab_cawn1 INTO wa_cawn1 with key atinn = wa_cawnt1-atinn
                                                         atzhl = wa_cawnt1-atzhl BINARY SEARCH.
            if sy-subrc eq 0.
           CONCATENATE wa_cawn-atwrt '->' wa_cawnt-atwtb INTO wa_cawnt-pcs.
           MODIFY itab_cawnt FROM wa_cawnt TRANSPORTING pcs.
           wa_pcs-pcs = wa_cawnt-pcs.
              wa_pcs1-atwrt = wa_cawn1-atwrt.
              wa_pcs1-atwtb = wa_cawnt1-atwtb.
              append wa_pcs1 to itab_pcs3.
            ENDIF.
            CLEAR : wa_cawnt1,wa_cawn1, wa_pcs1.
          ENDLOOP.
        ENDIF.
        CLEAR: dynpro_values1, field_value1.
    dynpro_values-FIELDNAME = 'MEPO1211-EMATN'.
    APPEND dynpro_values.
        field_value1-fieldname = 'MEPO1211-ematn'.
        APPEND field_value1 TO dynpro_values1.
        progname1 = 'SAPLMEGUI'.
        dynnum1 = '1211'.
        CALL FUNCTION 'DYNP_VALUES_READ'
          EXPORTING
            DYNAME                               = progname1
            DYNUMB                               = dynnum1
      TRANSLATE_TO_UPPER                   = ' '
         REQUEST                                = 'A'
      PERFORM_CONVERSION_EXITS             = ' '
      PERFORM_INPUT_CONVERSION             = ' '
      DETERMINE_LOOP_INDEX                 = ' '
      START_SEARCH_IN_CURRENT_SCREEN       = ' '
      START_SEARCH_IN_MAIN_SCREEN          = ' '
      START_SEARCH_IN_STACKED_SCREEN       = ' '
      START_SEARCH_ON_SCR_STACKPOS         = ' '
      SEARCH_OWN_SUBSCREENS_FIRST          = ' '
      SEARCHPATH_OF_SUBSCREEN_AREAS        = ' '
          TABLES
            DYNPFIELDS                           = dynpro_values1
       EXCEPTIONS
         INVALID_ABAPWORKAREA                 = 1
         INVALID_DYNPROFIELD                  = 2
         INVALID_DYNPRONAME                   = 3
         INVALID_DYNPRONUMMER                 = 4
         INVALID_REQUEST                      = 5
         NO_FIELDDESCRIPTION                  = 6
         INVALID_PARAMETER                    = 7
         UNDEFIND_ERROR                       = 8
         DOUBLE_CONVERSION                    = 9
         STEPL_NOT_FOUND                      = 10
         OTHERS                               = 11
        IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    READ TABLE dynpro_values1 INTO field_value1 with KEY fieldname = 'MEPO1211-EMATN'.
        LOOP at dynpro_values1 INTO field_value1 WHERE fieldname = 'MEPO1211-EMATN'.
          clear ematn1.
          if sy-subrc eq 0.
            ematn1 = field_value1-fieldvalue.
          endif.
          if ematn1 is not INITIAL.
            clear : wa_cawn1,wa_cawnt1,wa_pcs1,wa_ausp1.
            CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
              EXPORTING
                INPUT  = ematn1
              IMPORTING
                OUTPUT = ematn1.
            select *
            FROM ausp
            INTO CORRESPONDING FIELDS OF TABLE itab_ausp1
            WHERE objek = ematn1
            and atinn = param_name1.
            CLEAR itab_pcs4.
            if itab_ausp1[] is not INITIAL.
              sort itab_ausp1 by atinn atwrt.
              sort itab_cawn1 by atinn.
              READ TABLE itab_ausp1 INTO wa_ausp1 INDEX 1.
              loop at itab_cawn1 INTO wa_cawn1 WHERE atinn = wa_ausp1-atinn AND atwrt = wa_ausp1-atwrt.
                READ TABLE itab_cawnt1 INTO wa_cawnt1 WITH KEY atinn = wa_cawn1-atinn
                                                                atzhl = wa_cawn1-atzhl.
                if sy-subrc eq 0.
                  wa_pcs1-atwrt = wa_cawn1-atwrt.
                  wa_pcs1-atwtb = wa_cawnt1-atwtb.
                  append wa_pcs1 to itab_pcs4.
                  wa_pcsn-matnr = wa_ausp1-objek.
                  wa_pcsn-ebelp = field_value1-stepl.
                  wa_pcsn-atwrt = wa_cawn1-atwrt.
                  wa_pcsn-atwtb = wa_cawnt1-atwtb.
                  APPEND wa_pcsn to itab_pcsn.
                ENDIF.
                clear : wa_ausp1,wa_cawn1,wa_cawnt1.
              ENDLOOP.
            ENDIF.
           clear wa_pcs1.
           read TABLE itab_pcs4 into wa_pcs1 index 1.
           if sy-subrc eq 0.
             EKPO_CI-ZPCS = wa_pcs1-atwrt.
           endif.
          ENDIF.
        ENDLOOP.
        CLEAR: field_value1.
        LOOP at dynpro_values1 INTO field_value1 WHERE fieldname = 'MEPO1211-EMATN'.
          clear wa_pcsn.
          if field_value1-fieldvalue is not INITIAL.
            read TABLE itab_pcsn INTO wa_pcsn with key  matnr = field_value1-fieldvalue
                                                        ebelp = field_value1-stepl.
            if sy-subrc eq 0.
              clear  EKPO_CI-ZPCS.
    *EKPO_CI-ZPCS = wa_pcs1-atwrt.
              EKPO_CI-ZPCS = wa_pcsn-atwrt.
            endif.
          endif.
        ENDLOOP.
       CLEAR: field_value1, dynpro_values1.
       progname1 = 'SAPLXM06'.
       dynnum1   = '0111'.
       field_value1-fieldname = 'EKPO_CI-ZPCS'.
       APPEND field_value1 TO dynpro_values1.
       if ematn1 is not INITIAL.
         clear wa_pcs1.
         read TABLE itab_pcs4 into wa_pcs1 index 1.
         if sy-subrc eq 0.
           EKPO_CI-ZPCS = wa_pcs1-atwrt.
         endif.
       ENDIF.
      endif.
    ENDMODULE.                 " STATUS_0111  OUTPUT
    Function exits:
    ^^^^^^^^^^^^^^^^^
    EXIT_SAPMM06E_016
    ^^^^^^^^^^^^^^^^^
    INCLUDE ZXM06U41 .
    DATA XFISTL LIKE EKPO-FISTL.
    TABLES: ADRC, T001W.
    DATA: PLANT LIKE T001W-WERKS.
    SELECT SINGLE * FROM T001W WHERE WERKS = I_EKPO-WERKS.
    SELECT SINGLE * FROM ADRC WHERE ADDRNUMBER = T001W-ADRNR.
    XFISTL = ADRC-SORT2.
    SET PARAMETER ID 'FIS' FIELD XFISTL.
    * Added For PCS 12.11.2010
    DATA : fs_ekpo type EKPO_CI.
    if sy-tcode = 'ME22N' or sy-tcode = 'ME23N'.
    *  if tekpo-zpcs is INITIAL.
    *    message e000(zmm) with 'PCS Type should be chosen'.
    *  endif.
      loop at tekpo.
        if ( tekpo-ebeln eq i_ekpo-ebeln and tekpo-ebelp eq i_ekpo-ebelp ).
          ekpo_ci-zpcs = tekpo-zpcs.
        endif.
      ENDLOOP.
    endif.
    ^^^^^^^^^^^^^^^^^
    EXIT_SAPMM06E_018
    ^^^^^^^^^^^^^^^^^
    INCLUDE ZXM06U40 .
    E_CI_EKPO-ZPCS = EKPO_CI-ZPCS.
    E_CI_UPDATE = 'X'.

  • BAPI Structure populating using field name and field value frm internal tbl

    Hi Experts,
                     Need your help, my requirement is to populate BAPI import structure using its field name and filed value  stored in a internal table.  Please advise the best approach.
    Regards
    Ram.

    Hi, in an ABAP program you can make use of FIELD-SYMBOLS and the ASSIGN statement for filling the BAPI fields based on the fieldname found in the internal table. Hopes it answer your question. Succes

  • Flat file should have source field name and value

    Hi Friends
    I have a scenario of Idoc to Flat file , where in the target structure the field name and value should be present, generally only the value is available in a flat file.The target structure is as below:
    for e.g RECTYPE is the Field Name and A is the value.
    RECTYPE,A
    DATEH,20111101
    TIMEH,173125
    RECTYPE,B
    ORDNUM,4500054536
    ORDITM,150
    SUPDAT,20090218
    PLNQTY,000000006
    MATNR,14B300
    BATCH,5697
    PLANT,3026
    DELIVTYPE,PO
    SUPPLIER,0000023305
    SUPNAME,Deutsche BP AG
    SUPADRS,Erkelenzer Strasse 20
    SUPCITY,Monchengladbach
    SUPPOST,41179
    SUPCOUN,DE
    TRUCK_NBR,7589
    BOND_FLG,X
    STG_LOC,PLCL
    LINE_ACTION,CRE
    RECTYPE,B
    ORDNUM,4500056721
    ORDITM,10
    SUPDAT,20090218
    PLNQTY,000000013
    MATNR,116703
    BATCH,6589
    PLANT,3026
    DELIVTYPE,PO
    SUPPLIER,0000023380
    SUPNAME,DOW Belgium NV
    SUPADRS,Havenlaan 7
    SUPCITY,Tessenderlo
    SUPPOST,3980
    SUPCOUN,BE
    TRUCK_NBR,7589
    BOND_FLG,X
    STG_LOC,PLCL
    LINE_ACTION,CHG
    RECTYPE,X
    DATEH,20111101
    TIMEH,173125
    RECORDS,3

    Hi,
         NameA.addHeaderLine
    Specify whether the text file will have a header line with column names. The following values are permitted:
    ■       0 u2013 No header line
    ■       1 u2013 Header line with column names from the XML document
    ■       2 u2013 As for 1, followed by a blank line
    ■       3 u2013 Header line is stored as NameA.headerLine in the configuration and is applied
    ■       4 u2013 As for 3, followed by a blank line
    This specification is only permitted if exactly one structure is defined.
    regards,
    ganesh.

  • Field mapping and value mapping - Basic

    Hi,
    Assuming I have a repository containing a main table with 3 fields
    1)Product
    2)Description
    3)Manufacturer (lookup field)
    When i map the source file to the destination repository
    1) i map fields product and description of the source file and destination repository.
    2) map the manufacturer field between the source file and destination repository.
    3)Value map the contents of the manufacturer field between the source and destination.
    If i have a  source file like this.
    Product                                         Description                                Manufacturer
    a                                                         a                                              Hindustan lever
    b                                                         b                                              Hindustan lever
    a                                                         a                                              P&G
    b                                                         b                                              P&G
    Since i have made the manufacturer field a lookup field, it can hold the lookup values Hindustan lever and P&G.
    what happens to prduct ? i have made only a field mapping. Will the values a & b be stored in the destination repository this way?
    Is a value mapping required for product as well to hold both the values?
    Please help
    Thanks,
    Vignesh

    Hi Vignesh,
    You do not have to value map it. Import managerwill automatically assign both the values to product a and b. Basically it is set in the configuration options of the import manager. There is a setting "merge source records based on matching field". If that option is set to yes,  both the values will be assigned to product a and b respectively.
    Best Regards,
    Dheeraj

  • Reset or Edit IPTC Fields Stored Values

    Previous values used in IPTC fields are stored so that values can be auto-filled as a field is entered. I would like to remove some of the "stored values" for a field. How can I do this?
    Thanks,

    You can batch change. Select the photos you want to edit, batch change, leave the field empty, and check the "replace" checkbox.

  • How to get the table of value field? and can we expand the technical limits

    Dear
    I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
    And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
    We have a note for R.4.x Please see below:
    OSS note 160892
    You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
    The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
    To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
    David Sun
    Regards!

    how to extend the limit of value numbers? please see the original question.

  • Union two tables with diffrent count of fields with null and float value

    Hello,
    i want to union two tables, first one with 3 fields and second one with 4 fields (diffrent count of fields).
    I can add null value at end of first select but it does not work with float values in second table. Value form second table is convert to integer.
    For example:
    select null v1 from sessions
    union
    select 0.05 v1 from sessions
    result is set of null and 0 value.
    As workaround i can type:
    select null+0.0 v1 from sessions
    union
    select 0.05 v1 from sessions
    or simple change select's order.
    Is any better/proper way to do this? Can I somehow set float field type in first select?
    Best regards,
    Lukasz.
    WIN XP, MAXDB 7.6.03

    Hi Lukasz,
    in a UNION statement the first statement defines the structure (number, names and types of fields) of the resultset.
    Therefore you have to define a FLOAT field in the first SELECT statement in order to avoid conversion to VARCHAR.
    Be aware that NULL and 0.0 are not the same thus NULL+0.0 does not equal NULL.
    In fact NULL cannot equal to any number or character value at all.
    BTW: you may want to use UNION ALL to avoid the search and removal of duplicates - looks like your datasets won't contain duplicates anyhow...
    Regards,
    Lars

  • Display data to edit based on fields and its value defined in internal tabl

    I need to display data in a internal table for editing in a screen.
    you have a internal table with field name , data types and its value. I need to display data in a screen ( sceen painter not in a report) row by row in vrtical format.
    The internal table's structure not fix. you can have any number of fields in the internal table.
    Can you please send me code if it is available with you or send me any senario in SAP if any ...so that i can debug to extract the code..
    have to display data vertically as below in editable format,
    for example,
    Airline
    Flight Number
    Flight date
    Flight price
    Airline Currency
    Plane Type
    Maximum capacity
    Occupied econ.
    Total
    No of fields will change.
    also F4 help needs to be attached with each field.
    I think it can be done through step loop. can anybody give sample code or tell me where to find in SAP or somewhere else?
    it will be great help to me..
    Sanjeev

    Hi
    just check out this program DEMO_DYNPRO_STEP_LOOP.

  • Concatenate 2 data fields and put values in single line

    Hello,
    I am pretty new to BI Publisher. I want to concatenate 2 data fields (Product and ProductType). These concatenated values then I want to put them on a single line.
    eg.
    the values should look like
    ProductType1.Product1,ProductType2.Product2, ProductType3.Product3..........
    Thanks.

    The XML is
    - <ServiceAgreement>
    <AccountId>1-abcde</AccountId>
    <AgreementNumber>1-685</AgreementNumber>
    <AgreementStartDate>07/08/2010 13:46:18</AgreementStartDate>
    <AgreementStatus>Awaiting</AgreementStatus>
    <ContactFirstName />
    <ITIStreetAddress />
    <ITIStreetNumber />
    - <ListOfOrderEntry-Orders>
    - <OrderEntry-Orders>
    <ITIMoneyToCollect />
    <OrderDate>07/08/2010 13:46:53</OrderDate>
    <OrderNumber2>1-685579</OrderNumber2>
    <OrderStatus>Pending</OrderStatus>
    <OrderType>Sales Order</OrderType>
    - <ListOfOrderEntry-LineItems>
    - <OrderEntry-LineItems>
    <OrderType2>Sales Order</OrderType2>
    <ProdPromName />
    <Product>Hollywood 18m</Product>
    <ProductType />
    <PromotionId>123456</PromotionId>
    <ServiceId />
    </OrderEntry-LineItems>
    - <OrderEntry-LineItems>
    <OrderType2>Sales Order</OrderType2>
    <ProdPromName>Hollywood 18m</ProdPromName>
    <Product>n TV</Product>
    <ProductType>Root</ProductType>
    <PromotionId />
    <ServiceId />
    </OrderEntry-LineItems>
    - <OrderEntry-LineItems>
    <OrderType2>Sales Order</OrderType2>
    <ProdPromName />
    <Product>HBO + nFilmHD</Product>
    <ProductType />
    <PromotionId />
    <ServiceId />
    </OrderEntry-LineItems>
    - <OrderEntry-LineItems>
    <OrderType2>Sales Order</OrderType2>
    <ProdPromName />
    <Product>HBO</Product>
    <ProductType>Opcje dodatkowe</ProductType>
    <PromotionId />
    <ServiceId />
    </OrderEntry-LineItems>
    - <OrderEntry-LineItems>
    <OrderType2>Sales Order</OrderType2>
    <ProdPromName />
    <Product>nFilmHD</Product>
    <ProductType>Opcje dodatkowe</ProductType>
    <PromotionId />
    <ServiceId />
    </OrderEntry-LineItems>
    - <OrderEntry-LineItems>
    <OrderType2>Sales Order</OrderType2>
    <ProdPromName />
    <Product>nbox HDTV</Product>
    <ProductType>Dekoder</ProductType>
    <PromotionId />
    <ServiceId />
    </OrderEntry-LineItems>
    - <OrderEntry-LineItems>
    <OrderType2>Sales Order</OrderType2>
    <ProdPromName />
    <Product>Cinemax</Product>
    <ProductType>Opcje dodatkowe</ProductType>
    <PromotionId />
    <ServiceId />
    </OrderEntry-LineItems>
    - <OrderEntry-LineItems>
    <OrderType2>Sales Order</OrderType2>
    <ProdPromName />
    <Product>Filmbox</Product>
    <ProductType>Opcje dodatkowe</ProductType>
    <PromotionId />
    <ServiceId />
    </OrderEntry-LineItems>
    - <OrderEntry-LineItems>
    <OrderType2>Sales Order</OrderType2>
    <ProdPromName />
    <Product>Upust za zakup 3-ego pakietu</Product>
    <ProductType>Upusty</ProductType>
    <PromotionId />
    <ServiceId />
    </OrderEntry-LineItems>
    - <OrderEntry-LineItems>
    <OrderType2>Sales Order</OrderType2>
    <ProdPromName />
    <Product>Pakiet Informacja i Rozrywka</Product>
    <ProductType>Pakiety</ProductType>
    <PromotionId />
    <ServiceId />
    </OrderEntry-LineItems>
    - <OrderEntry-LineItems>
    <OrderType2>Sales Order</OrderType2>
    <ProdPromName />
    <Product>Opłata aktywacyjna za nbox HDTV</Product>
    <ProductType />
    <PromotionId />
    <ServiceId />
    </OrderEntry-LineItems>
    - <OrderEntry-LineItems>
    <OrderType2>Sales Order</OrderType2>
    <ProdPromName />
    <Product>Pakiet Dzieci</Product>
    <ProductType>Pakiety</ProductType>
    <PromotionId />
    <ServiceId />
    </OrderEntry-LineItems>
    - <OrderEntry-LineItems>
    <OrderType2>Sales Order</OrderType2>
    <ProdPromName />
    <Product>Pakiet Sport i Motoryzacja</Product>
    <ProductType>Pakiety</ProductType>
    <PromotionId />
    <ServiceId />
    </OrderEntry-LineItems>
    </ListOfOrderEntry-LineItems>
    </OrderEntry-Orders>
    </ListOfOrderEntry-Orders>
    </ServiceAgreement>
    </ListOfBipServiceAgreement>
    As per the above XML I want to see
    Pakiet Dzieci.Pakiety , Pakiet Sport i Motoryzac ja.Pakiety.....
    Thanks

  • How to fetch  old  and  new value  from of a   field(non-key)  from LOGDATA

    Hello SDNers,
    i  m fecthing LOgdata  from  dbtlog table[in  our  case  the  log  is  not  getting  Updated  in CDHDR  and CDPOS table]
    i  m  using  the  same  logic  as  it  is  used  in  RSVTPROT
    but  the  problem  is
    "  IT  is  fetching  OLD  and  NEW VALUE  after  Update from same  field LOGDATA  of  dbtlog  table BUT  when i  used  same  logic  it  is  FEtching  only  OLD  VALUEs,
    CAN  U  GUYS  PLS  TELL  ME  HOW TO FECTH  OLD  VALUE  and  NEW  VALUE  of a PArticular  field(non-key field, fecthing  key  field  is  not an  issue) From LOGDATA  field  of DBTLOG.
    thx  a  lot  in advance
    Regards
    Kuldeep

    Hi,
    May be this link is useful to you.
    a®

  • How to get field and variable value in oracle

    Hi all,
    I'm finding very difficulty to get a field value.. In oracle 11i form there is a field name called total accured and it has value 519.. but i'm not able get this .i search in all tables so iwent to help--> tools-->examine--(diagnostic)-->
    i get Block :'XYZ' field: "Balance" and value:'519' and search in table shown in help.
    Please can anyone help me to get this field and it's value. it is in HRMS.
    Thank You

    It may be a derived / calculated field, which is why you might not be finding it in a table.
    For information on the last query run (may give a clue) do help -> examine, then change block to "SYSTEM" and Field to "LAST_QUERY".
    Also, Help -> Record History will show you the table or view that the data comes from. May also lead to a clue.And this is what is mentioned in the doc referenced above.
    Thanks,
    Hussein

  • ADD ITEMS TO DROPDOWN BOX FROM A TEXT FIELD(USER ENTERS THE ITEM) AND BOUND VALUE ALSO

    I WANT TO ADD ITEMS  THE DROPDOWN BOX FROM THE TEXT FIELD(ITEM NAME) WHERE USER ENTER'S THE ITEM DESCRIPTION
    AND BOUND VALUE ALSO SHOULD BE ADDED TO THE SAME ITEM.
    SAME WAY REMOVE ITEMS FROM DROPDOWN BOX
    PLEASE GIVE SAMPLE FORM OR JAVASCRIPT FOR THE ABOVE SCENARIO.....
    INDEED HELPFUL FOR MY PROJECT PLEASE SEND ATTACHED PDF FORM

    Hi Praveen,
    Your form is not shared so I have not been able to access it.  But I have updated mine.  There are now two approaches, one that follows on from the above method and updates each drop down list in each row.  The second updates a separate dataset that the drop down list is bound to.  This second approach requires the remerge() method which can cause problems if your code has updates some form properties like a borders color as these will be reset, but the code is simplier and you will only have one list to maintain.  The add button click code is;
    var particulars = xfa.datasets.resolveNode("particulars");
    if (particulars === null)
        particulars = xfa.datasets.createNode("dataGroup","particulars");
        xfa.datasets.nodes.append(particulars);    
    var particular = xfa.datasets.createNode("dataValue","particular");
    particular.value = ItemName.rawValue;
    var boundValue = xfa.datasets.createNode("dataValue","id");
    boundValue.value = BoundValue.rawValue;
    particular.nodes.append(boundValue);
    boundValue.contains = "metaData";
    // find sorted position to insert
    for (var i = 0; i < particulars.nodes.length; i++)
        p = particulars.nodes.item(i);
        if (p.value > particular.value)
          particulars.nodes.insert(particular, p);       
                 break;
    // add to end if greater than all existing items
    if (particular.parent === null)
        particulars.nodes.append(particular);
    // clear source fields
    ItemName.rawValue = null;
    BoundValue.rawValue = null;
    // remerge form data to pick up new item
    xfa.form.remerge();
    And the binding looks like;
    I have updated my sample to include both methods, https://workspaces.acrobat.com/?d=OwysfJa-Q3HhPtFlgRb62g
    Regards
    Bruce

  • Dynamic form... field names and values...

    Boy-Howdy. I wish I had the opportunity to stop by this forum and hang out at a time when I am not having issue, but, alas... I appreciate the brain power of the great minds that populate this forum.
    I have an issue: I think I am close on this but cannot identify where my syntax is going awry. Here is a simplified edition of my situation.
    I have a form with a set of dropdown menus that filter a recordset. The group of drop downs are dynamic from a database and will vary depending on what category of products a visitor is viewing.
    If I browse to FRUIT: I get three options that let me filter for:
    Fruit Type
    - Apples
    - Bananas
    - Pears
    Fruit Grown By:
    - Organic
    - Any
    Fruit From:
    - Domestic
    - South America
    - European
    However, if I browse to LUMBER I get:
    Wood Type:
    - Pine
    - Walnut
    - Oak
    Wood Prep:
    - Pre Cut
    - RAW Timber
    Wood Origin:
    - North America
    - South America
    - Europe
    I have the variable naming and database values worked out. My only issue is when I browse to friuit and select apples I want apples to remain selected as I page through results.
    So, the dropdown field names are dynamic. Currently set to zgen1, zgen2, zgen3. I set a variable named sr and increment it to build the progressive 1,2,3 after the field name zgen.
    <cfparam name="sr" default="1">
    <cfoutput group="ft_id" query="oompa2">
    <strong>#f_ftrname#:</strong><br>
    <select name="zgen#variables.sr#">
    <OPTION value="">select...</OPTION>
    <cfoutput>
    <OPTION value="#ft_id#_#fs_id#">#ft_options#</OPTION>
    </cfoutput>
    </select>
    <br><br>
    <cfset sr=#sr# + 1>
    </cfoutput>
    But when zgen1 has a value (in this case "Apples") I can't figure out how to dynamically test for the presence of a value for each dropdown. I have dynamically created the field names (cfset xvalue="FORM.zgen#variables.sr#") to test against. However this creates a value of FORM.zgen1, FORM.zgen2, FORM.zgen3 as it loops when I want it to be Apples, Organic, Domestic.
    Example:
    The code:
    <OPTION value="#ft_id#_#fs_id#"<cfif xvalue IS "#ft_id#_#fs_id#"> SELECTED</cfif>>#ft_options#</OPTION>
    which is translating to:
    <OPTION value="15_5"<cfif FORM.zgen1 IS "15_5"> SELECTED</cfif>>Apples</OPTION>
    When I want it to be:
    <OPTION value="15_5"<cfif 15_5 IS "15_5"> SELECTED</cfif>>Apples</OPTION>
    I hope I am making sense. I would greatly appreciate it if someone could help me noodle this. I have a feeling it is not as complicated as my mind is trying to make it. Thoughts?

    Three selects related type code was not the way to go - because I need each filter to be independent. I created a custom tag that argues the state for each separately up to ten filters.

  • HR - dynamic selections field name and field value in the program

    HI all,
       I am using dynamic selections for a HR report.
    I have created a view with 20 fields and added it to HR report category ___00003(All fields suppressed).
    I need to check these fields in the program. But i am not able to get the field name and value in the program for dynamic selections fields.
    Please let me know how to get the field names and values in the program for dynamic selections .
    Thanks,
    Kranthi.

    You have to read the itab <i>pnpdynse</i> in your Program to obtain the Dynamic Selection values. This itab has a deep structure.. you can set a break point in one of the events before <b>get pernr</b> & in the debug mode, you will able to display the itab <i>pnpdynse</i>.. you can then identify how to get the values into your code..
    ~Suresh

Maybe you are looking for