Field to distinguish standard users and user defined users

Hi,   
   I want to distinguish the standard users and user defined users for getting one report to filter what are all the standard users in sap like sap*.....I dont know how to split the standard users and users created by us.is there any way to distinguish both the users
                                           Thanks in advance

>
J@Y wrote:
> In table USR04, MODBE is the Last changed by check if its your Zbatch, or any of your basis guyz initials on it. if not its standard created by SAP.
Nice try - but on my system SAP* has a MODBE of one of our basis people.

Similar Messages

  • Value mapping, interface mapping, standard funtions and user defined functi

    I like have more information abt live scenario's use of value mapping, interface mapping, standard funtions and user defined functions.
    How to create user defined funtions and how to use it in XI?
    thanks in advance
    shiva

    Hi,
    Interface mappings register your mapping program for an interface pair in the Integration Repository. If you require a mapping at runtime, it is sufficient to select the interface mapping for the interface pair at configuration time .The Integration Server uses the interface mapping to identify associated mapping programs for request messages, response messages, fault messages, or all three.
    Features
    Executing Multiple Mapping Programs for One DirectionBy using an interface mapping you can execute multiple mapping programs consecutively for the transformation of a request or response message. In such cases, an interface mapping comprises multiple steps for which the following applies:
    ●     The steps are executed in the sequence specified (from top to bottom). The result of the mapping program from the previous step is forwarded to the mapping program of the subsequent step.
    ●     Each step can reference a mapping program that executes a 1:1, 1:n, n:1, or an m:n transformation. In the case of multi-mappings (1:n, n:1, or m:n), the previous step must create the same number of messages that the subsequent step expects.
    ●     Multi-mappings use one envelope to put all messages in one structure. If one of the steps references a multi-mapping program, all subsequent steps must use the same envelope.
    The mapping for a request message comprises two message mapping programs: one 1:1 transformation and one 1:n transformation. Since the latter message mapping uses the multi-mapping envelope for both the target message and the source message, the message mapping for the 1:1 transformation must also create a transformation result with a multi-mapping envelope.
    You do not strictly need to divide up one direction of the whole mapping into different steps. However, this enables all the message formats in one system landscape to be mapped to a central message format, for example. This results in less mapping programs being required because you no longer need to be able to map all the different message formats to each other
    Activities
           1.      Create a message mapping on the design maintenance screen of the Integration Builder (see also: Creating an Object).
    You can also create multiple interface mappings for the same interface pair.
           2.      Enter the source and target interfaces that require a mapping of the request message, the response message, the fault message, or all three, in the table of the same name. The following restrictions apply:
    ○     If you want to use the interface mapping in a transformation step in an integration process, you must only specify abstract message interfaces. Furthermore, all objects (integration process, interface mapping, and all objects that reference the interface mapping) must be in the same software component version. If you want to reference objects from underlying software component versions, you must access the objects from the Basis Objects branch (in the navigation tree or using an input help).
    ○     If you want to map multiple messages to each other by using a multi-mapping, you can only specify asynchronous interfaces (for further restrictions, see: Multi-Mappings). If any message interfaces are missing, you can also create them by using the function Create New Object ().
    If the interface cannot be imported or cannot be created in the Integration Repository (in the case of an external adapter, for example), you must enter the interface names manually. However, it is not possible to check the technical name in this case.
           3.      To import the properties of the interfaces, choose Read Interfaces. The table in the lower area displays tab pages for the request message, response message, and if available, for the fault message, for each mode of the interfaces (either synchronous or asynchronous).
           4.      To develop an external mapping program, export the XSD schema of the respective request or response message as a zip file after you have imported the interfaces. The zip file can contain multiple schema files that reference each other, for example in a multi-mapping. In this case, the schema with the global message element has the name MainSchema.
           5.      To reference a mapping program for the respective message, you have the following options:
    ○     Select an existing mapping program from the Integration Repository by using the input help (). If this is a message mapping, the default setting of the input help only displays those message mappings that are found using the source and target message in the Integration Repository (in multi-mappings, the first source and target messages are used as the search criteria). However, you can also display any number of message mappings, for example, because you are constructing a mapping from several mapping programs with intermediate instances which have no message types.
    ○     You can create message mappings directly from the interface mapping. To do this, select the mapping type Message Mapping in the Type column. Position the cursor in the Name column and choose the function Create New Message Mapping () in the Mapping Program frame. The Integration Builder copies the specifications of the messages and their occurrence directly from the interface mapping.
    An interface mapping can only reference mapping programs that belong to the same or an underlying software component version of the interface mapping. This ensures that the mapping program can be shipped together with the interface mapping (see: Software Logistics).
           6.      If it is not a mapping for a fault message, you can execute multiple mapping programs in succession for request and response messages:
    ○     To insert an additional line for a mapping program, choose .
    ○     To delete the registration for a mapping program, choose .
    At runtime, the mapping programs are executed from top to bottom.
           7.      Save the interface mapping.
    Regards
    Aashish Sinha
    PS : reward points if helpful

  • Validating User Defined Fields on the OIM User Object

    Hello everyone,
    I'm currently using the OIM 11g, and am curious how to provide data validation for user defined fields.
    We currently have two user-defined fields for day of birth and month of birth, which have been set to required, but I would like to take this a step further and actually validate that the data being entered is numerical (two characters max), and if it's not, a red box appears around the field notifying the admin that the entry needs to fit the expected criteria.
    One example already in OIM is that of the email field. It appears to be using a regex to identify that data entered is of a certain format.
    Can anyone here point me in the direction of some proper documentation so that I may learn how to incorporate this into my environment? Thanks!

    Hi Kate,
    The only way to do it, is with Form Settings. Do not give them authorisations on Form Settings. You can then untick the "Active" tick box on certain fields and tick it on others. This can then be done, when you log on as the user him/herself.
    Regards
    Carin

  • I can't seem to get Firefox to open links in Thunderbird, for ex. and when checking defauts, it doesn't show up in my standard user profile (Win7)

    I've tried a few browsers, but want to go back to only Firefox as default browser. I can find it and allocate it in the Administrator profile, but not my daily use, standard user. It doesn't even appear in the list of programs to assign defaults.
    And when I click on a web link (in Thunderbird, for ex.) I have to copy and paste it in Firefox to go to the page.

    This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?

  • Please expose the employee ID field in ADUC in this version, also add a field for data of birth, and present both on the change password form so we can validate a user's identify when they ring up for a reset.

    Considering Active Directory is supposed to be all about business, corporations and enterprises, I find it staggering that in 2015 the ADUC console STILL does not expose the Employee ID field in the default UI without having to dig into the attribute editor.
    And then only if you browse to the user in their OU, the Attribute Editor tab is missing when you just search for the user. This isn't really helping our organisation. I've just setup the tech preview version of the new server version, and that doesn't expose
    it either.
    I'm not sure how other organisations handle this (suggestions please?), but when a user rings up the service desk for a password reset, we either have to keep them on the phone while we dig into their user account and look for the Employee ID for them to
    then confirm on the phone, or just take it on blind faith that they are who they say there are.
    Please for the love of all deities, can you expose the Employee ID field on the main user panel without having to dig into attribute editor. It would also be useful to show this information directly on the reset password dialog box so there's no looking
    up required. While you're at it, please can you add a date of birth field (if it isn't already there, I never seen one), and expose this on the main screen for the user, as well as the reset password box. This would give us two pieces of information to verify
    the identity of the user on the phone.
    All that being said, if anybody has a better way of identifying users on the other end of the phone, I'm all ears.
    Thanks in anticipation.

    Personally we use the AD selfservice plugin for manageengines service desk plus.

  • How do I get firefox to up date from a standard user account....or at least tell me to log on as administrator and update?

    I do almost all my work from a standard user account. Firefox neither automatically updates (as I set it to) or informs me an update is available.
    How do I get Firefox to update automatically when I am logged on as a standard user....or at least tell me to switch to admin account and update?

    Let me add a note to the developers: WE ARE ALL NOT ADMINISTRATORS!
    Even on our own personal computers.
    I claim that administrator accounts are for administering, or developing; not using. I wouldn't be an administrator for longer than is necessary than walk down the centre of a highway with my eyes closed.
    I'll repeat: Mozilla really should prevent the 'Update' button showing to an ordinary user if it's not going to be possible to use it.

  • Vista and iTunes shared library - Admin vs. Standard User

    Here's a good one.....I am the administrator of the family's Vista desktop computer, my kids are Standard Users. When I log in to the computer and bring up iTunes, I am able to see and access our shared library of music on our Synology DS207+ NAS. When either of my kids log in and bring up iTunes, the DiskStation appears on the left side underneath 'shared' but when they click on it, they are not able to access the music. A dialog box appears with the following message: 'the shared library "Disk Station" is not responding (-39). Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689.'
    Their Standard User accounts can access the music on the NAS through mapped drives and windows explorer.
    I am running CA (Computer Associates) Security Center and the firewall has the same rules in place for all of our logins. Here is the strange thing, when I change their account type from Standard User to Administrator, they are able to access the shared library of music, no more dialog box with that message. I change their account type back to Standard User and again, they are not able to access the music, and they get that message again.
    When I am logged in and enter the 'netstat' command, I see the following entry under foreign address:
    NAS:3689 Established
    When the kids are logged in, I see the following:
    NAS:microsoft-ds Established
    I've tried a lot of different things, too numerous to even remember or mention, all with no success. Some troubleshooting measures include:
    - change the kids permissions to the music folder on the DiskStation from read only to read/write.
    - disabled (not uninstalling) tcpip v6.
    - tried every combination of new firewall rule, to include ports 3689, 5353 and every port (and range) in between.
    - file and printer sharing is off on the administrator account, and is off on the standard user(s) accounts, but enabling it does not allow access to the library.
    - uninstalled Bonjour but once I do that, I cannot see the shared library anymore.
    - upgraded Bonjour to the latest version but still no success.
    If anybody reading this has other suggestions, please respond.

    I actually followed this, but I still had problems that I listed above. Is there any way that when you make changes to one account (even if there is only one main account where changes are made), the changes are automatically (or at least easily) applied to the other user accounts?

  • How to diable only one field enabled and other fields disabled for one user group?

    Hi,
    I have a form contains many fields. A group of users can add items using that form.
    As per the user requirement I have created a filtered view and that filtered view can be seen by some other sharepoint user group but as per their further requirement the new sharepoint user group is only allowed to update Remarks field. All other fields
    should be disabled for them.
    In my idea, I have to create multiple forms and in one of it except Remarks field all should be disabled but I am unable to assign multiple forms to a single list.
    Or how to make Remarks field enable to this user group and for other admin user group all fields could be enabled.
    Hope I have expressed my question correctly.
    Any solution would be appreciated.

    There is no Out of the Box way to set permissions on each column, primarily due to the performance impact. The following thread provides some options,
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/c0794232-9bab-4cea-91d8-f311a793a863/how-to-set-column-wise-permission-in-sharepint-list-in-sharepoint-2010?forum=sharepointadminprevious
    Dimitri Ayrapetov (MCSE: SharePoint)

  • SQL Developer Standard user and SID

    Good Morning!
    I installed the sql developer, but I don't know how connect, what the standard user and SID?
    Thanks
    Fernando

    The default user and SID are SYS and ORCL, but I doubt you have a database.
    http://www.thatjeffsmith.com/archive/2012/12/i-have-oracle-sql-developer-installed-now-what/

  • I am using mac os x 10.7 and forgot my admin password. i can log in to my sons ok but he is a standard user so unable to make config changes. does anyone know hw i can reset my admin pw please?

    hi i am using macosx 10.7 and have managed to forget my password being the administrator its a bit of a problem. i can, however, sign in using my son's log-in but he is only a standard user with no admin rights. any idears how i can gat my admin rights back?

    http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/

  • Personalize Link and Standard User / End User Core Role

    Hi Expert,
    Need your help in customizing service that appear when
    Personalize hyperlink click on Portal Right hand side.
    I understand the Personalize hyperlink
    appearing from Standard User Role or End User Core Role.
    I have copied End User Core Role and changed the ID,
    after that have removed all workset apart from User profile
    and assigned the new edited role to my user ID and it working fine.
    My Query is can any one please let me know,
    1. How is the new End User Core Role working? Where are the details property /or any other settings
    with respect to use the End User Core Role done,
    as the Personalize hyperlink appears when End User Core Role assigned to user?
    3. What are the configurations or any other changes that I have
    to do, if I need some other XYZ role to appear as a hyperlink like Personalize hyperlink appearing when End User Core Role is assigned?
    4. What are the steps / Process, if I have to remove all the tabs except General Information tab under User profile iView { Without using (CTRL + Right mouse click)}.
    5. If the pages at {portal_content/com.sap.pct/every_user/general/pages}
    are been used how are they used?
    Similarly
    If the iViews  at
    are been used how are they used? and If not whatu2019s its purpose?
    Currently I am on Portal Version 7.0 SP 13.
    Thanks in advance for all your time and comments.
    Cheers,
    SJ

    Hi Eric,
    you can add the Personalize iView to the page or end user role you created.
    to add the personalize iView to your role navigate to
    Content Provided by SAP - Admin Interfaces - Admin iView Templates - you can find different iViews related to Personalize.
    add the iView you want the end users to change.
    This is the simpler way.
    Hope this helps.
    Cheers-
    Pramod
    reward points if helpful.

  • Windows 7 OS with an Administrator and Standard User Functions

       While using this system I have noticed that when some other similar machine with this system seems to want an uneven non match. All mine are updated. I personalized the power scheme and desktop and not sure that the other wants it to be
    its subordinate. Does the administrator administrate over other administrators. He or she would set the restore point instead of the standard user. While the both somehow believe their personal documents are at least somewhat private. Sure there is not
    equal power on both sides.
       Could the other administrator please leave our administrator to do his own non dirty work?
     

    Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription.  This is a standard response I’ve written up in advance to help many people (thousands, really.)
    who post their question in this forum in error, but please don’t ignore it.  The links I share below I’ve collected to help you get right where you need to go with your issue.
    For technical issues with Microsoft products that you would run into as an
    end user of those products, one great source of info and help is
    http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
    http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
    For Technical issues with Microsoft products that you might have as an
    IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
    http://social.technet.microsoft.com/forums/en-us, and search for your product name.
    For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
    http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
    If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
    http://community.dynamics.com/
    If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize!  Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
    of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing. 
    If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you!  It’s called the Where is the forum for…? forum and it’s here:
    http://social.msdn.microsoft.com/forums/en-us/whatforum/
    Moving to off topic. 
    Thanks, Mike
    MSDN and TechNet Subscriptions Support <br/> Read the Subscriptions <a href="http://blogs.msdn.com/msdnsubscriptions">Blog! </a>

  • Clear Print Queue failes in Guest and Standard user accounts

    Hello community
    I've created a launchd configuration file to clear the entire print queue in Mac OS X at startup. This worked fine in Mac OS X Leopard but is broken in Mac OS X Snow Leopard when logging in to Guest or Standard accounts. It works fine for Admin user accounts.
    The launchd configuration file is saved in /Library/LaunchAgents/ and loaded successfully. I've checked the content of the plist (created with Lingon), ownership (root:wheel) and permissions (-rw-r--r--). Everything seems fine to me.
    Console error messages:
    Standard User
    com.ksry.ClearPrintQueue[5654] cancel: purge-jobs failed: Forbidden
    com.apple.launchd.peruser.502[5618] (com.ksry.ClearPrintQueue[5654]) Exited with exit code: 1
    Guest User
    com.ksry.ClearPrintQueue[6367] cancel: purge-jobs failed: Forbidden
    com.apple.launchd.peruser.201[6039] (com.ksry.ClearPrintQueue[6367]) Exited with exit code: 1
    com.ksry.ClearPrintQueue file:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.ksry.ClearPrintQueue</string>
    <key>ProgramArguments</key>
    <array>
    <string>cancel</string>
    <string>-a</string>
    <string>-</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
    Any help would be much appreciated.

    Welcome to the forums Novacco!
    I saw your post about not being able to scan from 3 Admin. Accounts from your PC. I would like to offer my suggestion that may help you.
    Try these troubleshooting steps on all 3 of the user accounts that are unable to scan: Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection
    Happy Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Do you standard users and password solman 4.0

    dear friends,
    system: solman 4.0
    database: microsoft SQL server 2005
    do you standard users and password solman 4.0.
    i m not able to log to system ..
    i also tried DDIC and SAP* from 000,800..
    do you know any other user of solman .. and it's password..
    please give me solution..
    thanks
    zaheer

    Hi,
    it is a newly installed system? or you forgotten the sap* passowrd
    we can try sap* with the password "PASS".But for that you need to carefully delete it at the database level.
    the statment somewhat look like
    delete USR02 where UNAME = 'SAP*' and MANDT='000'
    , since the table, USR02, which is the one that keeps the passwords.
    After this, you will be able to log on as SAP* again with password PASS.
    Thanks,
    Jansi

  • Always launching admin and standard user

    I just installed iTunes 8.1.1.10 in a brand nex Vista Home Premium box. I have one admin user and 5 standard users.
    Every time I launch iTunes from a standard user's account, I get the "you cannot oppen the application iTunes because another user has it open" error in the admin account.
    It appears that iTunes is trying to launch in both places.
    Any ideas?
    Thanks
    Joe

    More information would help. Are they not displayed on the login screen or you can't see them in System Preferences?

Maybe you are looking for