Field values are not erased when I change content types.

On an SP2010 site I created 2 Site Columns TextColumn1 and TextColumn2 (both Single Line of text).
I added Two Content Types ContentType1 and ContentType2 (both derived from Item).
I created a list and enabled content types. I Added ContentType1 and ContentType2 to the list.
I configured the devfault view to show TextColumn1 and TextColumn2.
I added an Item of ContentType1 and for TextColumn1 added the value 'c1'
I edited the item and changed the content Type to ContentType2 and entered a value of c2 for TextColumn2.
The default view still shows the value of 'c1' for TextColumn1 even though the item is of content type ContentType2 which does not have this field defined.
How do I correct this?

If I'm understanding your question correctly, this is expected behavior. The item still has both the content types applied to it. The columns are included in the view. So Any values in those columns for that item will be displayed.
You could create views for each content type.
You could also look into changing the default content type.
Not sure if this helps because I'm not sure I understood the problem.

Similar Messages

Custom Field values are not saved. when MPP imported from another instance.

Hello Mate-
Currently I am merging one small instance (I2) of PWA in our corporate instance(I1). as the corporate instance is huge, we are doing manual merge of groups, securities, users, custom fields etc. also downloading the MPP as xml from I2 and then planned
to publish from I1.
There are few project level custom fields which are being used in MPP. and those fields may have formulas too.
I created same custom field in crporate environment(I1) but while trying to open the projects in our corporate environment(I1), the project custom fields are gone.
Could you please guide me here, I am lost. I can not do a data base migration ans it would override all data from I1 instance so need to do it manually.
Many thanks
Deb
Dev EPM Consultant

Hi
You may not be able to do this as the custom field GUID's are different in both the instance.
You may write a macro to copy the custom field data from one to another one
refer :http://msdn.microsoft.com/en-us/library/office/ff867798(v=office.15).aspx
--Happy Troubleshooting
Thanks --Ajith

AET Generated field values are not saved.

Hi Gurus,
I have created two AET fields on the screen (marked below) and that should store values in table CRMD_CUSTOMER_H. When I create a new service request and enter the values and save, AET field values are not saved. Again, when I edit the same service request and enter the values and save , AET field values are saved on the database.
While debugging I found that, relationship BTHeaderCustExt does not exist for the first time and second time onward its appearing. Due to this, data is not being saved at first time (Line no 27 : current is empty).
When tried to create realtionship using create_related_entity , it throwing exception cx_crm_genil_model_error.
Please advice me the soution for the same.
Regards,
Anand

there should be a context node at your view level. Please check ON NEW FOCUS method is implemented or not.
If not, you can implement that method with below code.
    DATA: lv_collection TYPE REF TO if_bol_bo_col,
          entity        TYPE REF TO cl_crm_bol_entity.
*   get collection of dependent nodes
    entity ?= focus_bo.
    TRY.
        lv_collection = entity->get_related_entities(
               iv_relation_name = 'BTHeaderCustExt' ).
        IF lv_collection IS NOT BOUND or lv_collection->size( ) = 0.
          IF entity->is_changeable( ) = ABAP_TRUE.
            TRY.
                entity = entity->create_related_entity(
                 iv_relation_name = 'BTHeaderCustExt' ).
              CATCH cx_crm_genil_model_error cx_crm_genil_duplicate_rel.
*               should never happen
            ENDTRY.
            IF entity IS BOUND.
              CREATE OBJECT lv_collection TYPE cl_crm_bol_bo_col.
              lv_collection->add( entity ).
            ENDIF.
          ENDIF.
        ENDIF.
      CATCH cx_crm_genil_model_error.
*       should never happen
        EXIT.
      CATCH cx_sy_ref_is_initial.
    ENDTRY.
    me->set_collection( lv_collection ).

Custom field values are not storing in the data base

Hi Friends,
We have created one Custom field called ZZ_APPROVER in Rfx Header , we have included this field in the below stuctures
1.INCL_EEW_PD_HEADER_CSF_BID
2.INCL_EEW_PD_HEADER_CSF
The data type of this field ( ZZ_APPROVER ) is CHAR and the length is 1 . we have given 2 fixed values in Value Range
1 -
X+2 Approver
2 --- Provisional Approver
so when we select either 1 or 2 ( in Drop Down ), its displaying properly on RFx Screen, but when we try save this document the values are not strong in the data base.
Can any one give me idea why its not stroring in the data base
Thanks in Advance
Kumar Srini

Hi Ganapathy,
A Record is created in table BBP_PDHSC , for other z fields, the values are stroing , but for this field ( ZZ_APPROVER ) [ drop down list ], the value is not stroring
Thnx
Kumar Srini

Tcode VL10G quantity field values are not displaying ?

Hi All,
In TCODE - VL10G - Sales and Purchase Order display -
After passing the input values it displays the results with minimum fields in the ALV layout. When I add Quantity fields to the layout - WMENG -Order quantity and any other Quantity related fields it is not displaying values in the results. Even though the values exists in the table.
Can anyone tell me what could be the reason? In the input screen u2013 passing the values in USER ROLE tab has anything related to this issue?
I tried to debug and could not find code related to VBEP table or other table which has quantity fields.
Please let me know if any ideas? Thanks in advance.

Hi,
We are using - SAP ECC 6.0 system.
Any hint how I can solve this?
Thanks.

Oracle Table Values are not displayed when tried to display with Essbase

Hi,
I was trying to create a report with Oracle RDB Table and Essbase by following the steps given in "Federating Essbase and Relational Data Sources in Oracle Business Intelligence Suite Enterprise Edition Plus" document at the location http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/fed_data/fed_data.html.
I am able to see the members from the Essbase cubes and I can also see the Oracle Table values, if they are displayed individually (i.e. different reports) but when I try to get one report with Essbase values with Oracle table records then Oracle table records are not displayed and when see the query log I don't see the query for Oracle table but I see obviously MDX queries for the essbase.
Please help.
Regards,
Paresh

Hi,
Smitha, you can defnetly use dynamic table in interactive form. I had similar problem and I acheived like follwing:Basically you have to bind the table .
If you want to have fixed number of rows in the interactive form, then in wddoinit method bind the internal table to ur table node. for exmaple: if u want 2 rows in the form loop times . So by default when you open the form you will get two rows for the table.
**************BIND THE ITAB ****************************
DO 2 TIMES.
APPEND LW_LFBK TO LT_LFBK.
CLEAR LW_LFBK.
ENDDO.
CALL METHOD lo_nd_t_lfbk->bind_table
EXPORTING
new_items = LT_LFBK.
If you want to have dynmic table then take a submit button in the form instead of normal button,
in onaction submit write a loop every time you click that new submit button it should add a new row.
use above coding in onactionsubmit instead of doinit.
Thats it.
Regards,
Ravi

Place Holder values are not displaying when calling the report

Hi,
I have a Place holder column in my report and i am assigning the values in a formula column. When i run the report from report builder place holder column is showing the value. But when i deploy the same in application server and i try to invoke from a form it is not the value of that place holder column. Why is this happening? Please, help me in resolving the same.
Thanks & Rgds,
M T

Yes Gayatri. You are right. When i run the report from report builder it is working perfectly. The same report i deployed in application server and invoking from a form report is not showing the values for place holder columns.
Why is this happening?
How to resolve it?

Lose navigation when I change content type

Hi,
when I change the content type of my JSF to "text/xls", I lose the navigation of the page.I can't go the the other page of my application through the link.
Anyone know how to fix this?

Never mind. I figured it out what was causing the split of each disc into a different audiobook: The title of each track had the separate disc numbers and that made it appear as if it was a different book. Once I changed the title of each track to reflect the book's title without the disc number, the different tracks all merged into one audiobook in the audiobook section of iTunes.

Schedule lines are not modified when i change the requested delivery date

Hi
i have a issue when i am created sales order with requested delivery date 10.11.2011
and the same is copied in to item schedule lines as a 10.11.2011
before saving the order i change the requested derlivery date to 11.11.2011
this new requested delivery date is not dopied to schedule lines at item level (still is having 10.11.2011)
can any one tell me this is system standard behaviour or can we correct this
Thanks and Regards
Kishore

Hi DevarapalliKK,
I tried this solution & problem is solved.
--Go to VA01 & enter the material & qty
--Select the line item in VA01 & click on Edit
--Select Fast Change of & click on Delivery date & mention the Delivery date as 11.11.2011. & click on copy.
--Check the request delivery date in header level in sales tab it will change to 11.11.2011 & also check the Schedule lines in Item level the date will be 11.11.2011 & Save it.
Please let me know if your problem is solved
Regards
Pradeep

PDF file opening with blank fields - the field values are not populated.

Recently, our users have been facing this issue, "data not populating in the PDF fields".
We are using FDF in PHP to load the PDF templates and apply the data to the PDF fields. This works fine on many adobe versions but showing empty fields in few adobe versions. For e.g It worked fine with Adobe Reader 10.1.3 but did not work in 11.0.
This has been critical now as it is showing empty fields in IE11. Can you please help me overcome this issue.
Thanks!

All I can suggest is to try the latest Reader versions, i.e. 10.1.11 or 11.0.8.

The types of the parameter field and parameter field current values are not compatible.----

HI,
I am attempting to set report parameters in my .jsp code via URL parameters.
I am able to set the report name, server connection dynamically however when attempting to set the Parameters I receive:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKParameterFieldException: The types of the parameter field and parameter field current values are not compatible.---- Error code:-2147213303 Error code name:invalidParameterField
The parameter on the report is a String Type, named for this example p1.
The value that p1 represents is LERAD
My code:
String stringValue = request.getParameter("p1");
CRJavaHelper.addDiscreteParameterValue( clientDoc, "","p1", stringvalue);
returns the above mentioned error.
I have tried:
String stringValue = (String)request.getParameter("p1");
which returns the above error
And;
String stringValue = new String(request.getParameter("p1")).toString();
which returns
java.lang.NullPointerException
java.lang.String.<init>(Unknown Source)
org.apache.jsp.callReport_jsp._jspService(callReport_jsp.java:105)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:432)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:390)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:334)
javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
I notice that the CRjavaHelper.java declares this addDiscreteParameterValue as accepting an Object type for the newValue.
Any ideas???

Hi,
nevermind.
case sensitivty strikes again.
my URL param was P1 ( case sensitive)

Change pointers are not generated when creating a material master

Dear Experts,
Change pointers are not generated when creating a material master.
However, when a change is made to the already created material, the change pointers are created according the fields in BD52.
Am I missing any settings?
I need to create change pointers immediately when I create the material master in MM01.
Please suggest.
Regards,
Shetty

did you follow the steps given in
http://help.sap.com/saphelp_nw73/helpdata/en/4a/6dcbe9c95261a3e10000000a421937/frameset.htm

When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll I uninstalled and reinstalled.same result HELP!

When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll I uninstalled and reinstalled.same result HELP!

Taken at face value, you're having trouble with a QuickTime program file there.
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "QuickTime" and then click "Repair".
Does the repair go through okay? If so, are you able to launch iTunes and/or Safari now?

I cannot find information to help me change the orientation of a video filmed in portrait format but only able to be played back lying on its side (landscape) instead of upright. All the rotation buttons for iPhoto are not 'engaged' when it is in video .

I cannot find information to help me change the orientation of a video filmed in portrait format but it can only able to be played back lying on its side (landscape) instead of upright. All the rotation buttons for iPhoto are not 'engaged' when it is in video .

Thanks OT,
I tried the Export function but it would not allow me to choose the option of exporting to iMovie. I think you are right about needing Quicktime Pro. I opened iMovie and imported the clip from iPhoto and with some searching found the 'cropping, rotation' mechanism. So I now have a copy in the correct orientation. I plan to import/export it back to iPhoto because I want to have a copy on my iPhone to show people and I wanted to have it available as part of a slideshow I am making in iPhoto of my recent overseas trip. It is a pain that there is no simple orientating tool for the movie clips downloaded to iPhoto with the photos from the one camera.

Changes are not reflected when objects transported from Quality to Productn

Hi
In case of moving some Transport requests from Quality to Production, some times the changes made to the selection screen of a report program doesn't reflect in Production. Also we don't see any Transport error while transporting. Moreover, we can see the changes by regenerating the Program in production.
Would any one help me out in this with the reason for this.
Pls suggest what needs to be done.
Satish.

HI,
Thanks for the reply.
- I have checked the respective transport too, and every thing seems to be fine.
- Recently we went to go live, for the next release, so earlier before go live, we didnt faced any proble.. Only now we are facing this problem, that we find the changes relating to selection screen are not reflected when the object / prog is moved from qty to Prd.
- Only problem is with the selection screen.(not getting reflected in PRD. In Qty we are able to see those changes.
- Then in order to reflect these changes in PRD, we have to re generate the object, then only it get s updated..
Satish.
Edited by: satish c on Sep 22, 2009 3:35 PM

Field values are not erased when I change content types.

Similar Messages

Maybe you are looking for