FieldPoint and Enet-RS232 converter

Hi all,ces
How can I drive ENET-232/2 from the application, embedded into the FP-2010? I'd also like to know where to get more detailed description about ENET-232 devi

Hi,
I do not believe that you will be able to communicate to an ENET-232 device from an embedded application in a FP-2010. The ENET-232 device requires that you use NI-VISA in LabVIEW to communicate to the device. However, the FP-2010 currently does not support NI-VISA. Here are a few links to more information regarding the ENET devices:
ENET-232 Series and ENET-485 Series User Manual for Windows 2000/NT 4.0 and Linux x86/Solaris 2.x
Using the ENET-232 and ENET-485 Series on Windows 9x
Hope this helps,
Mike

Similar Messages

  • USB to RS232 converter

    I would like to run a terminal emulator (eg. minicom) on my Arch box to look into my Netgear DM111P router.
    I have the 3.3v TTL to RS232 converter already, but my IBM Thinkpad T40 does not have any (DB9) serial ports.
    I was wondering if I could use the USB port instead with a RS232 to USB converter cable like this one:
    http://www.amazon.co.uk/USB-RS232-Conve … B00077DJIQ
    Can anyone tell me if this will work or what my other options are?

    If I read you correctly, you're saying that the physical connection to the microcontroller is (DB9) serial, while the physical connection to your Arch box is USB and that you're running minicom on your Arch box to read the output from (and send input to) the microcontroller.  Have I got that right?  I'm new to this stuff, as you can tell, and I find it pretty confusing so I just wanted to clarify.
    Could you suggest some serial-USB hardware to me as I've got to buy mine and I'd like to get something I know will work?

  • Using GPIB-RS232 converter with an embedded application

    Hi
    I am quite new to GPIB, so this might be a rookie question Using my own embedded application I need to communicate with a couple of Agilent power sources to send commands and queries. I got a GPIB-RS232 converter from NI but I can't figure out from the online help wether I can directly write to the serial port attached to the NI GPIB-RS232 ans SCPI command. I would be grateful if you can help me out to find the documentation on how to communicate to several Agilent GPIB instruments connected to the NI GPIB-RS232 converter configured to work in mode S.
    By the way, for testing I am developing the modules for my application on a desktop computer under linux using gcc c++ compiler.
    Thank you!

    This might be useful: NI GPIB-RS232 Examples
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions

  • Necessity of GPIB-RS232 Converter

    Hello,
    This may be a silly question but I just want to be sure.
    Say I have a PC running Win7 and LabView and an instrument is connected to it with both a GPIB cable and and RS232 in its serial port. Will I be able to use VISA functions to send and receive serial data to the instrument or would it be better to use an NI GPIB-RS232 Converter? In what situations would said converter be useful?
    Thanks!

    Yes, you would use VISA with all three options. The fastest and more robust method is with GPIB. Personally, I see no point in the GPIB-RS232 converter. It's expensive and you are limited to the same RS232 baud rates that an inexpensive USB-RS232 converter gives you. I recommend FTDI based serial converters. You would probably need to modify any driver if you use the GPIB-RS232 as well.
    The last time I saw and used the GPIB-RS232 converter was several years ago when I bought an instrument that the vendor said had a GPIB option. What it really had was the converter inside. Very disappointed by what I found.

  • Which RS232 converter recommended for cisco console

    hi,
    which RS232 converter cable is the recomanded for cisco console?
    i used many converters and getting blue screen error for my windows 7 Enterprise
    sometimes port not working as well!
    Any assistance would be most appreciated.  Thanks.

    There are several good options. Personally I use a USB-Serial converter from TRENDnet purchased at amazon.com for US$9.99:
         http://www.amazon.com/TRENDnet-RS-232-Serial-Converter-TU-S9/dp/B0007T27H8
    I use it on conjunction with the standard Cisco RJ-45-DB-9 serial console cables that come with every router and switch. Since I'm regularly unpacking new ones, they're easily replaced when the little tab on he RJ-45 breaks off (the most common failure). The same USB-DB-9 serial adapter has held up under regular use for about 5 years.
    Other threads have also reported good luck with other vendors:
         https://learningnetwork.cisco.com/thread/46991
         https://supportforums.cisco.com/thread/2009070

  • New to macbook pro and have msmoney files (mbf) stored on an external hard drive. I want to transfer them to MoneyWiz and need to convert them to qif.  Does anyone know of any free software available and how do I do it. Thanks.

    I am new to macbook pro and have msmoney files (mbf) stored on an external harddrive.  I want to transfer them to MoneyWiz and need to convert them to qif.  Does anyone know of any free software available and how do I do it. Thanks.

    iTunes>Preferences (Cmd+,)>Advanced
    Choose the Ext HD (and the appropriate folder) as the location for your library.

  • I just bought this in order to copy and paste from a PDF and after I convert I still can't..

    I just bought this in order to copy and paste from a PDF and after I convert I still can't..

    Hi helpme59,
    It depends upon the restrictions set on the pdf.
    If the creator of the pdf has set restrictions against copying then you will not be able to copy the content.
    Are you facing the same issue with all the pdf's?
    Would it be possible to share the pdf with me.

  • After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and conver

    After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.

    You should install Camera Raw 4.6.
    Visit this page and follow the instructions carefully:
    PC:    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
    Mac:  http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
    -Noel

  • I can't open Sony NEX-5 raw files with PS-CS6 and latest raw converter plug-in 7.1.

    When I try to open raw files from Sony NEX-5 instead of going to PhotoShop like all my NEF files, they go to another software suite that I have (On-One).  I am running MAC OS 10.7.5 with latest PS-CS6 and latest raw converter plug-in 7.1.  On-One seems to hi-jack these Sony raw files and won't give me the opportunity for the adjustments that I get with the Adobe Raw File converter.  Any help??

    Great news!
    Since you have the solution, you might want to see this article: http://forums.adobe.com/thread/1058744?tstart=0
    Marking your thread as Answered will be helpful to many.
    Good luck,
    Hunt

  • HT4798 I have forgotten my password for mountain os. I have followed the instructions about going to "User group" and enetering my apple ID. It doesn't work. Can anyone help me? Thank you.

    I have forgotten my password for mountain os. I have followed the instructions about going to "User group" and enetering my apple ID. It doesn't work. Can anyone help me? Thank you.

    Welcome to the Apple Support Communities
    https://discussions.apple.com/docs/DOC-4101

  • How do I download a Adobe PDF file and get it converted to a Word document?

    How do I download a Adobe PDF file and get it converted to a Word document?

    Download: you just download it as you would any other document.
    Convert to Word: either using the ExportPDF online service, or Acrobat.

  • I recently subscribed to Adobe ExportPDF and tried to convert a PDF file to MS Word.  So far,  after many tries,  I get soe type of error and the conversion fails.  Please advise?

    I recently subscribed to Adobe ExportPDF and tried to convert a PDF file to MS Word.  So far,  after many tries,  I get soe type of error and the conversion fails.  Please advise?

    Hi there,
    It sounds like there may be an issue with the quality of the PDF. Not all PDFs are created equal, and especially those created from scanned documents can be problematic if the scan quality isn't the best. Is there a dark background on the PDF, or stray marks or smudges?
    You can try converting with OCR disabled at outlined in this document: How to disable Optical Character Recognition (O... | Adobe Community. But, while that's a good test to find out where the problem lies, you'll end up with a Word document that isn't editable, so it's not an optimal solution.
    Please let us know how it goes.
    Best,
    Sara

  • Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in

    Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in german "Fehler bei der Anmeldung"). I hope have explained the issue on the right way with my bad english. Do you have a solution for it?? Best regards, Marcus Wenk

    yes, you are right. it is the adobe reader via exportPDF. but it should be the acrobat. it was written on the internetpage...

  • After Preflighting a PDF, using Convert to CMYK, Flatten Transparency and Prepress Profile Convert to CMYK only the resultant PDF has a grubby halo along the edge of some white type sitting on an image. The type is part of the image.

    I am using a 27" iMac 3.2 GHz Intel Core 5, 8 GB Memory, running Yosemite 10.10.1. 
    The version of Acrobat that I am using is: Acrobat XI Version 11.0.10
    After Preflighting a PDF, using Convert to CMYK, Flatten Transparency (high resolution) and Prepress Profile "Convert to CMYK only" the resultant PDF has a grubby halo along the edge of some white type sitting on an image. The type is part of the image which is 300 dpi.
    It is like the image isn't really 300 dpi but has been artificially boosted to that to avoid being tagged by Preflighting, but when Preflighting the file it knows the original resolution.
    I have screen grabs which illustrate the problem perfectly but do not know how to post them, if indeed they can be.
    Any help or comments gratefully received.

    Without the files and possibly screen prints, it is virtually impossible to assist you.
              - Dov

  • An existing PDF portfolio and want to convert it to Acrobat's Portfolio but when I pull it in

    I have an existing PDF portfolio and want to convert it to Acrobat's Portfolio but when I pull it into Portfolio is shows one document but does not show the 55 pages that make the exisiting portfolio of work.  Help, all I can seem to find are directions to pull in every photo individually.

    Dave, he is asking the same thing I want to ask.
    He has a pdf portfolio and what he actually wants is a basic pdf.  (his pdf portfolio has already been made, ie existing, not hypothetical!)
    I cannot find the answer either... extremely frustrating since I was not ever trying to create some flash based slide show, but a proper PDF, and inadvertently created the portfolio when choosing to Create PDF From File... You would THINK the default behaviour would then be to create a PDF, and NOT a portfolio pdf!!!!!
    Really annoying and frustrating... bad job Adobe!
    Is there a way to convert back to basic pdf??
    Mark

Maybe you are looking for

  • BI IP Executing planning sequence via process chain not possible

    Hi, we use BI IP and have defined a process chain (RSPC) with value type process planning sequence. When we execute it, we get error message "Inconsistent input parameter (parameter: <unknown>, value <unknown>)" When we execute this planning sequence

  • Stress test on an HyperV server.

    I have just installed my 1st HyperV server and it seems a bit sluggish. Does Microsoft have a program to stress test the system(CPU, memory, NIC, Harddrive) and provide a report...? Thanks, Tom... Tom Karpowski...

  • Is it possible to simulate whole java card application on simulator?

    Hello all, currently i dont have any real java card yet,not either reader . I already made a simple applet and check its working by CJCRE (net beans simulator), it is working fine, now i want to move to host application which will communicate with ja

  • Installing iOS 8.2 on 5s w/ 7.1.2 Hangs

    Hi, I am trying to upgrade my iPhone 5s from 7.1.2 to iOS 8.2.  I did do a backup prior to the upgrade process.  I then started the update.  All seemed to be going well until the "Verifying updated iPhone software..." step.  At that point the process

  • Backlight and navigation

    Is there a way to keep the backlite of my iPhone 3G continuously switched on, when I have it in my Kensington Car holder/charger? When I use the Maps app while driving, I would like to have the light on.