Fields in Keynote 3 (eg pagenumber, pagecount, date created)

I have imported a ppt with pagenumber field. This field works as expected in KeyNote 3.
The thing is, is there a way to create such a field (or one of the variations I mentioned)

The other fields, no, but Keynote does support page numbers on master slides or on each slide via the slide inspector, you simply turn it on and format it to your liking.

Similar Messages

No information in the 'Date Created' field in Finder

Hi
I am on 10.4.11 OS and I am having a problem with Finder and the Date Created field. When I view my photos in files the 'date creation' field is missing. It is just blank. The 'Date Modified' field appears.
This has become a large problem for me since another application I use will import only photos with a Date Creation Field...and will not import unless there is one.
Anyone have any experience with this? How to fix it? Or how to at least enter a date in the fields?
thanks in advance
Tammy

Make sure "Date Created" is check in your Finder View preference.
Try trashing your Finder preferences and reboot.
HD > User > Library > Preferences > com.apple.finder.plist
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Cannot add hub-managed content type with external list lookup columns to a list -- Error:Id field is not set on the external data field

This is a variation on the issue mentioned in this
post
We are using SP 2010 Content Hub to manage our content types. On the content hub we've created a couple of exteranl lists, and then created some site columns as lookups against these lists. We then added the columns to one of our content types
and set it to publish.
After the publishing job executed, I tried adding the content type (which now appears on the subscriber sites) to one of the document libraries on one of the subscriber sites. When I did that it threw the following error:
Microsoft.SharePoint.WebControls.BusinessDataListConfigurationException: Id field is not set on the external data field
at Microsoft.SharePoint.SPBusinessDataField.CreateIdField(SPAddFieldOptions op)
at Microsoft.SharePoint.SPBusinessDataField.OnAdded(SPAddFieldOptions op)
at Microsoft.SharePoint.SPFieldCollection.AddFieldAsXmlInternal(String schemaXml, Boolean addToDefaultView, SPAddFieldOptions op, Boolean isMigration, Boolean fResetCTCol)
at Microsoft.SharePoint.SPContentType.ProvisionFieldOnList(SPField field, Boolean bRecurAllowed)
at Microsoft.SharePoint.SPContentType.ProvisionFieldsOnList()
at Microsoft.SharePoint.SPContentType.DeriveContentType(SPContentTypeCollection cts, SPContentType& ctNew)
at Microsoft.SharePoint.SPContentTypeCollection.AddContentTypeToList(SPContentType contentType)
at Microsoft.SharePoint.SPContentTypeCollection.AddContentType(SPContentType contentType, Boolean updateResourceFileProperty, Boolean checkName, Boolean setNextChildByte)
at Microsoft.SharePoint.SPContentTypeCollection.Add(SPContentType contentType)
at Microsoft.SharePoint.ApplicationPages.AddContentTypeToListPage.Update(Object o, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   b55297ed-717f-466d-8bdc-297b20344d3f
I checked the external content type configuration and it did specify an "id column". Anyone know if what I am attempting to do is possible and if so, what special configurations are required?
Thanks

The issue is not External Content type or external list but the look up column.
It's not possible to publish a look up column via the Content Type Hub.
If you need to do this then an alternate way is to use a Managed Metadata column instead, otherwise you will have to implement this via a feature.
Varun Malhotra
=================
If my post solves your problem could you mark the post as Answered or Vote As Helpful if my post has been helpful for you.

Date fields and compare and get the later date of the fields

I am trying to compare these date fields and compare and get the later date of the fields
Tables are
TABCASER
TABCASER1
EVCASERS
Field
Are
TABCASER1.CASER_no
The dates are to be compared and then get the records with the highest or latest date value.
TABCASER1.CASERRECIEVEDDATE
EVCASERS.FINALEVDATES
EVCASERS.PUBLICATIONDATE
EVCASERS.PUBLICATIONDATE
TABCASER.COMPAREACCEPDATE
I have this code but I am trying to figure out what it all means.
I have several questions.
1.
1.     greatest it is used here to compare right? How do I then output this ? do I store it to a var (coldfusion) ultimately , I wish to send it to a page of records
2.     is it necessary to use todate? And to_date? What does this do?
3.     decode, is this necessary too. What does this do? NULL?
4.
5.
6.     when I do get the query results how do I send it to coldsuion and out put to a display.
Someone sent me this code.
is there abetter way of doing this? To compare the dates and store in a var to display. thanks
Here is my code below:
Greatest(
     CASE
          WHEN INSTR(TABCASER1.CASER_no,'-CE') > 0 THEN
     decode(TABCASER1.CASERRECIEVEDDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER1.CASERRECIEVEDDATE)
                         WHEN INSTR(TABCASER1.CASER_no,'-ERNIE') > 0 THEN
     decode(EVCASERS.FINALEVDATES,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.FINALEVDATES)
                         WHEN INSTR(TABCASER1.CASER_no,'-MONIE') > 0 THEN
     decode(EVCASERS.PUBLICATIONDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.PUBLICATIONDATE)
                         WHEN INSTR(TABCASER1.CASER_no,'-NADINE') > 0 THEN
     decode(EVCASERS.PUBLICATIONDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.PUBLICATIONDATE)
                         ELSE
     decode(TABCASER.COMPAREACCEPDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER.COMPAREACCEPDATE)
                    END
          ,decode(TABCASER.COMPAREACCEPDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER.COMPAREACCEPDATE))
          between TO_DATE('#dateformat(form.startDate,"mm/dd/yyyy")#','MM/DD/YYYY') and TO_DATE('#dateformat(form.endDate,"mm/dd/yyyy")#','MM/DD/YYYY')
is there abetter way of doing this? To compare the dates and store in a var to display. thanks

Hi
If you have date datatypes than:
select
greatest(TABCASER1.CASERRECIEVEDDATE, EVCASERS.FINALEVDATES, EVCASERS.PUBLICATIONDATE, EVCASERS.PUBLICATIONDATE, TABCASER.COMPAREACCEPDATE)
from TABCASER, TABCASER1, EVCASERS
where ...-- join and other conditions
1. greatest is good enough
2. to_date creates date dataype from string with the format of format string ('mm/dd/yyyy')
3. decode(a, b, c, d) is a function: if a = b than return c else d. NULL means that there is no data in the cell of the table.
6. to format the date for display use to_char function with format modell as in the to_date function.
Ott Karesz
http://www.trendo-kft.hu

To find the date type fields in the row and validate those date fields

TYPES : BEGIN OF TY_MARA,
          MATNR TYPE MARA-MATNR,
          ERSDA TYPE MARA-ERSDA,
          ERNAM TYPE MARA-ERNAM,
          LAEDA TYPE MARA-LAEDA,
          MTART TYPE MARA-MTART,
        END OF TY_MARA.
DATA : it_mara TYPE STANDARD TABLE OF ty_mara,
      it_mara1 TYPE STANDARD TABLE OF ty_mara,
       wa_mara TYPE ty_mara.
loop at it_mara into wa_mara.
describe field wa_mara-ersda type c_data.
if c_data eq 'D'.
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
    EXPORTING
      date                            = wa_mara-ersda
   EXCEPTIONS
     PLAUSIBILITY_CHECK_FAILED       = 1
     OTHERS                          = 2
IF sy-subrc eq 0.
wa_mara-ersda = '00000000'.
    append wa_mara to it_mara1.
    write :wa_mara-matnr,wa_mara-ersda.
    else.
        wa_mara-ersda = '00000000'.
    append wa_mara to it_mara1.
    write :wa_mara-matnr,wa_mara-ersda.
ENDIF.
endif.
endloop.
This issue regarding how to find the date type fields in the row and validate those date fields.If its not a valid date ,i have to assign initial value to that.
I've tried that for single field using describe field.Please help me do that for all fields.

Hi Sam,
I believe we had discussed the same issue in the below thread. Can you please refer the below one?
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d93e16ff-c123-4b36-b60b-60ccd34f6ca7/calculate-time-differences-in-infopath?forum=sharepointcustomizationprevious
If it's not helping you please let us know
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

How do I insert a 'date created' field into a template?

I know that you can insert date & time fields into templates and make them auto-update whenever I open the document, but I am wondering if I can make the date field be set to the date when I created the document and then stay that date even if I reopen the file?
In other words, is there a "Date Created" field?
Thanks in advance for any help given.
I am using Pages '09.

I believe the date will either update always or never, depending on how you set it's options. I don't believe you will find an option for Update Once and Never Again.
You will have to update the date upon creation and then set the option to not update. You can always find the creation date in the Document Inspector, Info tab, Show File info. You can also read this information in the Finder.
Jerry

Login password field "The field is to small to accept the data."

Hi Guys,
I'm having a problem with the SDK.
I.m creating a .net application that connects via SAPbobsCOM.
And getting the folliowing error when i fill the password.
We are using sap business one 2005.
The field is to small to accept the data.
comp = new SAPbobsCOM.Company();
      //You then need to set the following company object properties (connection parameters): Server,
      //UserName, Password, language, and CompanyDB , for example:
      comp.Server = @"VLSRV901"; //Name of the MS SQL DB Server
      comp.DbUserName = "sa";
      comp.DbPassword = "abcdefg!";
      comp.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL;
      comp.CompanyDB = "VLA-0209-PROD-William"; //Enter the name of your company
      comp.UserName = "manager";
      comp.Password = "abcdefg09";
      comp.language = SAPbobsCOM.BoSuppLangs.ln_English;
      //To connect to the company database, you call the company object Connect() method:
      int i = comp.Connect();
      if (i != 0)
        int errorCode;
        string errormessage;
        comp.GetLastError(out errorCode, out errormessage);
        throw new Exception(errorCode + " " + errormessage);
The password i'm using is exactly as long as the password i show in the example code.
Please advise, how to use "long" passwords??
Thanks in advance.

Hi Gordon,
We are using sql server 2005.
For your information, the password of the manager is already 9 characters long.
This works when I login to Sap Business One.
But not when I log in through the SDK.
Please advise.
William
Edited by: wvaert on Sep 7, 2010 8:04 AM

Use of field 'StartPoint' in work order operation's 'Dates' tab

Hi,
Can someone please explain me on the uase of field 'StartPoint' on work order operation's Dates tab.
Regards.

Start point will be used in case of scheduling for the operation.
By mentioning the condition & date, while doing automatic scheduling, system will change the start date of the operation & correspondingly finish date.
Note: This will work only when Automatic scheduling is ticked for the control key.
Regards,

Reserved fields in the catalog record have incorrect data???

I inserted the orginal installation disk for the Mac mini. I ran the verify disk. Then nine of these messages in red showed - "Reserved fields in the catalog record have incorrect data." I then did repair disk and now it shows that 1 volume could not be repaired. I have the MiniStack as well. I am assuming that the Hard Drive is the one needing repair. Not the MiniStack which also has OS installed along with Classic. How can I fix the disk? How important is the message in red?

You have directory damage.
Use Disk Warrior to repair the drive: http://www.alsoft.com
Explanation of what directory damage is and what causes it: http://alsoft.com/DiskWarrior/details4.html
The other option is to wipe your drive and re-install everything.

SQ01 query, one field not populating in first line, pushing data to next line

Good day all
I have worked with queries for some time and have never encountered this error
I have a few table joins (FAGLFLEXA, BKPF, BSEG, EKKN, SKAT and EKPO), every thing works and displays correctly, except for the one field
EKKN (ABLAD) - Unload Point.
For some reason, when I test the query, it displays correctly with one entry, but as soon as you run the test for more entries, for some reason, the first Unloading point on the report is empty and the value reflects on the next line. If you display the physical documents where the data pulls from, you can clearly see that the entire report pushes down the field to the next line.
For example
Physical SAP Document GL and or PO:
Year     Per     Do     Document No     Profit     Account     Short Text     Merch     Amount in Grp     Segm     Posted on     Unload Point
2014     001     XF     40000000000     ABCD     86100       Text              ACD       72799.60             11          20140106      24/59/68
2014     001     XD     40000000001     ABCC     86100       Text              ACC       18755.50             11          20140108      26/00/48
SQ01 report (with one line)
Year     Per     Do     Document No     Profit     Account     Short Text     Merch     Amount in Grp     Segm     Posted on     Unload Point
2014     001     XF     40000000000     ABCD     86100       Text              ACD       72799.60             11          20140106      24/59/68
SQ01 report (with more lines)
Year     Per     Do     Document No     Profit     Account     Short Text     Merch     Amount in Grp     Segm     Posted on     Unload Point
2014     001     XF     40000000000     ABCD     86100       Text              ACD       72799.60             11          20140106      2014     001     XD     40000000001     ABCC     86100       Text              ACC       18755.50             11          20140108      24/59/68

I found the error! The query was written in a certain format. For example it had many fields which was used to populate the data from different tables. The error occured because of the sequence. The query had to bring in a field but it had to derive it from a purchase order, but the purchase order check was after the said field therefor, when it looked at the Purchase Order, it found the field and populated it, but only on the second line. In the first line it couldnt find the Purchase order yet (as EKKO was lower down), so it didnt populate it yet....
SIGH

Field Update workflow action - Updating today's date into a field

Hello there.
I was hoping someone might be able to help with an error currently being experienced with regards to this workflow action.
The requirement is for a workflow rule to action the printing of today's date into a custom field on an Activity record. The workflow rule condition is (PRE('<Status>') <> 'Completed') AND ([<Status>] = 'Completed'). This appears to be working and triggering the action correctly.
The custom field to be updated is of type 'Date'. The value being updated into this field is 'Today()'. Overwrite existing values is checked.
The default value for the field is also 'Today()'. Thus the workflow action involves overwriting the default value (i.e. the date the record was created) to the current date when the Status is switched to completed.
When the workflow is triggered the following error message occurs:
"Unable to evaluate workflow rule for the following reason:
Update [Custom field name] : The value '01/18/2008' cannot be converted to a date time value. (SBL-DAT-00359) (SBL-ODS-00500)"
One odd observation is that this error only occurs when trying to update activities that were created on previous days - (it will not overwrite the default value of 15/01/2008 with 18/01/2008). The workflow does not return an error message when asked to overwrite a value which is equal to itself (i.e. if the default value was 18/01/2008, the workflow runs without error, although the value stays the same as you would expect.)
Can anyone shed any light on this? One potential thought is that our CRM is set up so that all dates appear in a different format - i.e. dates appear as dd/mm/yyy, rather than mm/dd/yyyy. Could this be contributing to this issue?
Any help very much appreciated indeed.
Thanks,
Kieran
ps. The reason for doing all this is that 'Completed date' for an activity does not appear in reporting. This has been raised with Oracle and apparently an 'enhancement request' has been registered.

Guys,
using the following statement, it does display the current system time
Mid(Timestamp(),4,2)+'-'+Mid(Timestamp(),1,2)+'-'+Mid(Timestamp(),7,4)+' '+Mid(Timestamp(),12,8)
Now When i do this , it displays me a time which is 3 hours ahead
Mid(Timestamp(),4,2)+'-'+Mid(Timestamp(),1,2)+'-'+Mid(Timestamp(),7,4)+' '+Mid(Timestamp() + (3.0/24.0),12,8)
My problem is to now display the difference of the current time stamp and the the time which shows 3 hours ahead in one field
Thats is substracting the first timestamp syntax fro mthe second timestamp syntax
and ofcourse if I copy paste both the syntaxes and put a minus sign in between, it doesnt work
Timestamdiff is not allowed in workflows or field validations :(
Anyone has any ideas?
Nick

FYI DU error:"Reserved fields in the catalog record have incorrect data"

I had a very perplexing problem...
My iMac G5 was shutting down by itself so I took it to Apple and had the power supply replaced. After it was repaired I was concerned about the hard drive health after the unexpected shutdowns. So I ran Disk Utility and encountered the following...
The iMac G5 is running OS 10.4.6.
I ran "Repair Disk Permissions" from Disk Utility and encountered no errors.
I ran "Verify Disk" from Disk Utility on the drive and I get these results (copied from DiskUtility.log):
Verifying volume “TheDisk”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Reserved fields in the catalog record have incorrect data
Checking volume bitmap.
Checking volume information.
The volume TheDisk needs to be repaired.
Error: The underlying task reported failure on exit
Disk Utility stopped verifying “TheDisk” because the following error was encountered:
The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
This occurs whether I run it while booted from the hard drive or the restore disc. While booted from the restore disc, running repair disc indicates that the failure could not be fixed.
Booted from the hardware test disc and all tests passed.
Booted from TechTool Pro disc and all the tests passed.
Booted from Disk Warrior (had to get the "free" update to boot my iMac G5) and rebuilt directory. No errors reported.
Still same error reported in Disk Utility. ???
Booted iMac in 'safe' mode. Rebooted iMac normally.
Disk Utility now reports success!

Sorry but this is not assistance to you but an additional request for help from someone!!!
I had the same thing occur just now!!!! I have used everything in site and keeps returning............
Hope someone has an answer as to why this occured....

Option for IPTC "Date Created" field to be auto-populated?

Hi,
The date of capture is held within the "Date Time Original" field in the EXIF data; but the IPTC "Date Created" field is blank.
Currently i have to fill this in manually if i want it populated (which i have to do for a certain customer, for hundreds of differently dated images) but i would really like a "replicate" button by which i can auto-populate this field; or someother easy workaround that i might be missing here?!?
thanks,

Hmm, both LR 3.6 and LR 4.0 normally set IPTC:DateCreated to be the same as EXIF:DateTimeOriginal, both on export and when you do Metadata > Save To File.
Perhaps you could post a culprit image here (use the camera icon) to see what might be going on with you.

Is it normal that the DataSource field is blank when opening a master data

Is it normal that the DataSource field is blank when opening a master data which is also an InfoSouce in InfoSource page.
Just locate an InfoSource which is also a master data or data target where next to which is a green triangle picture icon in InfoSource page, open it, the top part (Commnication Structure) is automatically expended. Expend the lower part "Transfer_Structure/Transfer_Rules", find the DataSource field is blank. This only occurs for an InfoSource which is also a master data which have more than two data loads (e.g., one is attibute, and the other is text load) or there are two InfoPackage loads for this master data. We checked for master data with only one InfoPackage under it (e.g., only text load) and find it's OK that the datasource field is not blank when expending the lower section.
Thanks

Kevin
It's not common. If you have three Data Sources like attributes, texts and hierarchy by default attribute data source will appear on the screen and for the rest of the things we need to do dropdown and select. This is how in general it appears.
Thanks
Sat

"Date Created" or "Date Modified" field for Contacts?

Is there any way to view -- or sort by -- a "Date Created" or "Date Modified" field in Contacts?
Or, at the very least, view a single records Date Created/Modified?
In particular, when exporting the BB's Contacts to an ASCII, I'd love that field to appear.
Thanks,
MooShoo

When I open a search window (command "F") and then press Command "J" or go to "Show View Options" under the "View Menu" it just brings up a window that says: "There are no view options for the "Searching This Mac" window"
I am using OS 10.5.8 on a 1st Generation MacBook Pro. I have successfully changed view options in other folder windows, but can't in the search window. I have just started trying an Application called "Find Any File" (http://apps.tempel.org/FindAnyFile/) and it looks like it may provide what I want but is MUCH SLOWER than spotlight.

Fields in Keynote 3 (eg pagenumber, pagecount, date created)

Similar Messages

Maybe you are looking for