Fields in the parameter trans., of OB52 are not in the same order as OB52

Hi All,
I have created a Parameter transaction for the OB52 transaction.
When i execute the transaction the "to account" field is showing before "From account" field. where as in OB52 "to account" field is present after "From account" field.
How can i change the order in the transaction which i have created?
the procedure i followed to create a Parameter transaction can be find at http://www.sap-img.com/zf011.htm.
ur help will be highly appreciated.
Thanks,
Amar Y.

hi,
I tried what u mentioned above.
But the thing is we can drag and drop only the fields which are in edit mode. I am not able to drag and drop the fields which are in display mode.
i am able to drag and drop only period and year columns. Not able to drag and drop from account and to account fields.
can u help me?
Edited by: amaranath yerragunta on Mar 10, 2010 9:59 AM

Similar Messages

Report parameter startdate has a defaultvalue or a valid value that depends on the report parameter startdate forward dependencies are not valid

Hi,
Am trying to develop a report the parameter has an issue, it gives me an error.
There are 2 parameter (1st is Date range like start and end date and 2nd is Loan number)
When ever I select date range the Loan number parameter should go blank. If I input a loan number then date range should go blank.
What should I do. Please help
ERROR --report parameter startdate has a defaultvalue or a valid value that depends on the report parameter startdate forward dependencies are not valid

Hi Kay_MD,
If there are only two parameters, we can use first parameter charge the second one, but the second one cannot charge the first one in turn. Because parameter forward dependencies are not valid. To achieve your requirement, we can create another parameter
to control Date_range and Loan_number parameters. For more details, please see:
Add a parameter named ReportParameter1 with two available values: Date_range and Loan_number.
Use the following expression as the default value in Date_range parameter:
=iif(Parameters!ReportParameter.Value="Date_range",1,"") (1 means a useless value)
Use the following expression as the default value in Loan_number parameter:
=iif(Parameters!ReportParameter.Value="Loan_number",1,"") (1 means a useless value)
Please note that the Date_range and Loan_number parameters should enable Allow blank value (“”), and the blank values should also be contained in available values.
If there are any other questions, please feel free to let me know.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How can I have two fields with the same name if it makes sense?

Hello, folks :)
I have a pretty hard time figuring out how I can have two text fields with the same binding name.
The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
Thanks for your replies :)
P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

Mandatory fields on the same page with dependent LOVs

Hi,
I am working on an ADF-BC application using JDeveloper 10.1.3.4
I have an ADF Creation form with dependent LOVs and while implementing dependent LOVs we set the autoSubmit property of the selectOneChoiceListBox as true.
If I have some mandatory fields on the same page then because of the autoSubmit property set as true whenever I select a value in the list the page gets submitted and the mandatory fields give an error that the values are required therefore I had to remove the mandatory fields.
I tried using f:subview but even that dint serve the purpose because what I want is something like partialSubmit so that my mandatory fields do no give an error when I select a value in the list.
Can somebody help me on this, how to have a dependent list and mandatory fields on the same page.
P.S: It is very crucial for my application
Thanks,
Raksha

Hello,
This bug has been around since 10.1.3, its even still present in Trinidad and now in 11.
One of the ways to avoid is to make your fields use:
showRequired="true"instead of
required="true"I have not found a decent way to avoid this in general.
My idea was that this shiould be possible with a phaselistener and determine if this is a partial page event instead of a normal submit, but this didnt work.
-Anton

How to compare two fields from the same table in the select statement

Hi, friends
I try to compare tow fields from the same table, but no result,
For example, this
data: cptotchek tyep i.
select count(*) into cptotchek
from aufk where erdat = aufk-idat2 .
The result is cptotchek = 0, but there are the records in aufk , where, aufk-erdat = aufk-idat2.
Please, help me, i don't use the loop statement for optimize my program.
Regards

Hi ,
       it will not return any value   when you are using   column of same table
       such as Date Field   , Because while Using Aggregate Function it will not check with self column
.      For that you have to take data in one internal table and then you can work on it .
     And if you are worried about Performance it will not affect , untill you are selecting only required data .
you can try this way .
data: cptotchek type i.
types : begin of w_aufk.
        include structure aufk .
      types : end of w_aufk .
data : it_aufk type standard table of w_aufk with header line .
select * into corresponding fields of table it_aufk
from aufk .
loop at it_aufk .
if it_aufk-erdat = it_aufk-idat2 .
write : / it_aufk-erdat , it_aufk-idat2 .
else .
delete it_aufk .
endif .
endloop.
Regards
Deepak.

How to place two text fields on the same line in adobe

I am trying to create a form on adobe and I would like to have two unique text fields on the same line. Is this posible?

If you are using FormsCentral it is, the fields can be placed "side by side" in a row. There is a "+" sign on the right side of the field that brings up a toolbar to add a field adjacent. You can also right click on a field and select "Insert beside", or you can "drag and drop" fields next to one another or to a new row.
Thanks,
Josh
PS - One note, if you are using the "desktop" application of FormsCentral that comes with Acroat Pro XI make sure the application is up to date by either using the "Help" - "Check for updates" menu item or by signing into the application so that you have the latest features including the side by side layout.

Additional field in the sales order screen

I need some additional field in the sales order screen. There is
also no screen exit available for VA01. Can I use this
additional data B tab in header details by creating additional
field in it. Please tell me how to use this tab or how to get
different field in the sales order (header or item level).

Hi,
Yes. You can use this screen. For this either can modify the table VBAP with additional fields and put them on this screen.
You have to code your logic to save these values in the include MV45AFZZ. The subscreens you have to use for this are 4462 or 8459.
refer Screen exits - Urgent.
with regards,
Vamsi

Lsmw error - no fields with the same name

Dear Experts,
I am trying to upload master data through LSMW through Standard Batch/Direct Input but when i am executing the step READ DATA it is throwing me error as
File 'C:\Documents and Settings\Guest\Desktop\DMS.TXT' and source structure 'ZEQUI_STRUTURE' have no fields with the same name.
Even though i cheked my flat file in notepad i used the following field for it
AEDAT
EQTYP
SHTXT
EQART
GROES
ERDAT
ANSDT
ANSWT
WAERS
HERST
HERLD
TYPBZ
BAUJJ
BAUMM
SERGE
SWERK
STORT
BEBER
GEWRK
ABCKZ
EQFNR
BUKRS
ANLNR
KOSTL
IWERK
INGRP
TPLNR
HEQUI
Regards,
Rip.
Edited by: Julius Bussche on Jan 20, 2009 11:04 AM
Please use meaningfull subject titles

Hi Ripel,
When you are assinging a file if it has field names in first row then select "Field names at Start of file", if not names then uncheck the box at "File Structure".
If fields are using, then check the tabulator in file and Uncheck the "Field order matches Source structure Definition."
Regards,
Sunil
Edited by: Sunil Reddy Sibbala on Jan 20, 2009 11:10 AM

Alias tables do not show more than 9 fields of the same type in a Command

Hi there, In Crystal Reports I have a Command to query a database, this works fine and returns what I need,
but in when you add more than 9 alias's and and then Select more thatn 9 fields of the same type it does not show any more them in the Field Exporler window.
i.e. I want to add another alias and select casdet_text(10) but it does not show any more than 9.
Any help woud be apprecitated.
Thanks
casdet_text(1)
casdet_text(2)
casdet_text(3)
casdet_text(4)
casdet_text(5)
casdet_text(6)
casdet_text(7)
casdet_text(8)
casdet_text(8)
casdet_text(9)

Hi James,
It's likely an internal limitation. If you are going to alias all of your fields it's more efficient to use a View or Stored Procedure to handle the renaming server side rather than client side.
It may even be a connection limit, try using another tool and see if you can add more than 9 aliases.
Thank you
Don

Need Profit centre field as mandatory field in the sales order

Dear All,
Normally Profit center data maintained in the material master, same data will get coipied to the sales order while creating sales order in VA01 transaction.
My requirement is if profit center data is not maintained/available in the sales order system should give the error message
For this I need Profit center field as mandatory field in the sales order(VA01).
Can you please give possibilities ASAP.
Give the SHD0 maintenance step by step.
Regards,
Murali.

Hi Murali
I beleive that you are talking about the Profit centre field not maintined in sales order hence not picked in delivery and billing and there is an FI posting error (GL account error) because of that
Profit centre is maintained in MMR and the same flows thro the sales cycle and i am quite sure if maintained in MMR it will be picked automatically and no need to make it mandatory in sales order( as the purpose is already solved)
But there is no standard option in SAP like (even if Account assignment category of the material is not maintained in MMR it can be given in VF02 and the document can be released for accounting) to give the Profit centre in the billing and release the same
Profit centre field field is picked from masters and flows in the entire flow and that field is greyed out (like no option of inserting it inbetween)
As told by others incompletion log in sales doc type will take care for future orders and for the already created orders the standard option is cancel billing, reverse delivery and open the sales order and give Profit centre field and process it (if only a few orders are there)
But if the already created orders are many then from the FI Area you need to go for development ( we also faced this issue as profit center not maintained in MMRs and hence accounting got hit and there were tons of billing docs and our FI consultant made some development to open it and solve it) FI consultant should be able to do this for already created orders
Instead of making Profit centre field as mandatory field in the sales order better make it a mandatory entry in MMR
Regards
Raja

Editing the conversion field in the sales order

Can any one tell me how to use the user exit USEREXIT_FIELD_MODIFICATION in order to make the conversion field in the sales order enabled so that i can edit it in the sales order
Regards,
SD Consultant

Hi Serry,
As per my understanding you are talking about currency conversation in sales order which is in grayed out at sale header level,the values are coming from VBKD - KURSK so through the user exit ask your abaper make that filed in editable mode.
Regars
Ram

LiveCycle says mixed when fields have the same Y coordinate

After using the Layout menu align option to align the top of two fields, I again selected the fields. The Layout panel showed that their Y coordinate was mixed, even though they showed the same value when each field was selected individually. I modified the Y coordinate of both fields individually and changed them back. When I selected both fields again, the Y coordinate showed as the correct number.
Apparently, using the Layout menu to align fields doesn't reset whatever it has to reset in order to show that multiple fields have the same Y coordinate.
The most annoying part of this is that it affects tab order. A field which has the same Y coordinate may be looked at as lower on the page.
I'm using Adobe LCD 7.0.1 on a Dell Optiplex GX620 running Windows XP Professional with Service Pack 2.

Hello darrensimon,
This is a bug in Windows 7 (maybe 8 and Server as well). One of my customers are sometimes affected by this. I have not a perfect solution but I've arranged so that the IT responsible person on that company can access the server where
the files reside through RDP (Remote Desktop). Already open is there Shared Folders->Open Files. This gives the IT responsible person means to force closing of an already saved file that for some (bug) reason stays in the cache (MS loves cache but never
updates them) and falsely claims the file is open.
Please try! Shared Folders are reached by right-clicking Computer and select Manage.
Best regards George

OVS for two fields in the same selct Option?

Hi Experts,
I am using select options in my view. I am using OVS for one field. I would like to use same OVS for another field in the same select option.
I tried "case ovs_callback_object->context_attribute". Which return the field for which we press F4.
But IT did not work here probably because this we can use only for context attributes fields.
but But here I dont get the select option field.
But in my case I have select options which are not mapped to any context attribute.
How can I find , for which field in select options F4 help has been requested?
Regards,
Vishal.

Hi,
You can find which field in select options F4 help has been requested using I_OVS_DATA-M_SELECTION_FIELD_ID.
        CASE I_OVS_DATA-M_SELECTION_FIELD_ID .
             WHEN 'PERNR'.
             WHEN 'ENAME'.
             WHEN OTHERS.
        ENDCASE.
If you are using one OVS for more than one fileds, please remember that you need to provide different code for each fields at phase 0 (configuration) and phase 3 (apply result).
Regards,

Two fields on the same line in sreen programming

Hi All,
I need to create a selection screen which would have two fields (their texts and their irespective input fields) in the same line, on the screen.
I was able to achieve this by using code--
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-a04.
PARAMETERS: sch_begd LIKE qppnp-begda.
SELECTION-SCREEN COMMENT 52(22) text-a05.
PARAMETERS: sch_endd LIKE qppnp-endda.
SELECTION-SCREEN END OF LINE.
This could allign the fields - start date (text-a04) and end date (text-a05) in the same line along with their input fields.
But I am facing two issues with this code-
1. I am not able to get the underline same as we get when we create selection screen using 'select-options' and 'parameters'.
2. This is causing accessibility issues, as the field text and the input field are no more linked (since I am using text element to display the field text, like for start date), it cannot find the text to be read for the input field and hence the checkman errors.
Please suggest how to achieve the same.
Thanks and Regards,
Arpita.

Hi Arpita,
Are you trying to have select-option field in your screen in dialog programming?
If yes than you can use the following approach else ignore this.
Create one screen (100) and create subscreen area on this screen and call this subscreen in PAI and PBO of screen
Using call subscreen check F1 help for calling subscreen in PAI and PBO.
Now you should create your selection screen on the subscreen use selection screen begin of screen (100) option of defining
selection screen and then add your selection options here.
Regards,
Pawan

How to display or generate PDF417 barcode dynamically in PDF form? I am using Acrobat XI Professional and there is a Bar Code Field in the same through which I generated the same. But I want to generate the same dynamically.

How to display or generate PDF417 barcode dynamically in PDF form? I am using Acrobat XI Professional and there is a Bar Code Field in the same through which I generated the same. But I want to generate the same dynamically.

What do you mean by dynamically? When yo set up a 2D bar code field you specify which field name/value pairs you want to include, along with other parameters. But be aware that they won't work with Reader unless you Reader-enable the document with LiveCycle Reader Extensions and include the bar code usage right. It will work with Acrobat Standard/Pro.

After upgrading to 5.01, songs in my playlist no longer are in the same order as on itunes. I want to at least list them by the most played first not some random Apple order.

After upgrading to 5.01, songs in my playlist is no longer are in the same order as on itunes. I want to at least list them by the most played first not some random Apple order.

Not sure why this is happening and it is a pain. Once the Purchased list sorted by 'date added' go to the left most column and select the top - in my Purchased list the new items go to the bottom and I drag them back up to the top position.
MJ

Fields in the parameter trans., of OB52 are not in the same order as OB52

Similar Messages

Maybe you are looking for